Mac Mini with BenQ W100 Projector (No signal with DVI Dual cable)

Hi all, just bought a Mac Mini Intel 1.6ghz. Also have a BenQ W100 Projector which have been using for some months with a PC. Now comes the problem! I have bought a DVI-DVI cable (Dual link) and plugged the Mac into the Projector and NOTHING APPEARS! No source found at all. The input on the projector is DVI-I according to the BenQ website.
Question is, am i using the right cable? Is the Mac Mini even compatible with this projector? Nobody seems to know, even BenQ!!
Thanks for any help
BEN

Hi, FYI this is the cable I have. Strangely it only references HD sources and not computers on the description? I would note that PC World (where i bought it from) have shown this cable operating on a PC unit and LCD monitor so im presuming its nothing to do with the cable?)
http://www.amazon.co.uk/Belkin-PureAV-Digital-Video-Dual-Link/dp/B0003057GO[/URL]
I used a VGA to DVI cable when the PC was running on the projector. which shows a picture no problem. I tried using the DVI/VGA adaptor that came with the Mac then plugging the VGA-DVI cable into it. As i say no picture just a flicker now and then.
I have tested Mini and he works fine on a LCD TV using the VGA/DVI adaptor and a standard VGA-VGA cable.
I guess i will exchange the cable and see what happens!

Similar Messages

New Mac-Mini on a 1080p projector

Would the new mac mini (with leopard) work well with a 1080p projector (Marantz 15s1) using dvi to vga connection? I tried connecting my Macbook Pro to the projector and the picture looks soft even when I selected 1080p resolution on the macbook pro. The projector confirmed that it's displaying 1080p but the picture is still not as sharp as using a windows based pc.

The EMI filters are based on tiny surface mount parts, so I would say trying to bypass them would be very difficult without a schematic and layout diagram and a lot of skill.
Can you at least temporarily connect the MBP to an HDMI port on the projector just to confirm that the fuzziness goes away? That would at least confirm my hunch that the problem is related to filtering of the analog video. If the fuzziness is still present under HDMI, then there is some other issue to be addressed.

I am looking to buy a Mac mini, but I already have a monitor with a dvi plug in. Will I be able to use this monitor with the Mac mini??

I am looking to buy a Mac mini, but I already have a monitor with a dvi plug in. Will I be able to use this monitor with the Mac mini??

Here are the Mini's specs:

I was wondering if mac mini can transmit file (share ) files/ photos with mac pro/ ipad where there is no internet

I was wondering if mac mini can transmit file (share ) files/ photos with mac pro/ ipad where there is no internet

http://www.imore.com/instashare-iphone-and-ipad-review
For more Google for:
bluetooth transfer between ipad and mac

Which mac mini should i go for: the one with AMD graphic card or Intel. I meanly going to use it for hometheater and HD movies.

which mac mini should i go for: the one with AMD graphic card or Intel. I meanly going to use this for hometheater and HD movies.

Intel HD 3000 graphics card can easily handle HD movies up to 1080p. But if you are looking at higher resolutions possibly 4k or 8k that are being released this summer in new TV's, I would go with the AMD card. The AMD card would be good for video and picture applications and also games. But if this is strictly to power your 1080p home theater setup then the choice is obviously the Intel HD 3000.

Mac Mini Server on Yosemite showing x2 Servers with one being redundant

Hi
I have a Mac Mini OS X Server that worked fine with setup/name of 'server' on Mavericks, however since upgrading to Yosemite the server has now become Server (2) (or server-2) leaving a redundant 'server' (server) in the shared tab.I can't access 'server' on the Mac Mini server or via the Network (even with connect as) and cannot rename \server-2' to server. I have re-installed the OS with no change.
Does anyone have any ideas what is going on here please and also how I could reset the 'serve-2r' to show correctly as 'server' and remove the erroneous one?
Thanks
Glennyboy

The real answer to this depends on two things:
1) whether you're just trying to do this within your lab, or you want external systems to be able to get to your services (e.g. students be able to access these resources from outside the school network)
2) whether each device in your schools' network have real-world IP addresses, or whether the network uses NAT.
If the answer to 1 is that this is only within the lab then there isn't likely to be any issue - get an IP address for your server from the network admins (which is why #2 is relevant) and you're set. The network guys would only have other involvement if you wanted to get external access working, in which case you've got to talk to them about opening holes in firewalls, etc.
If this is purely internal (or, at least, doesn't need access from outside the school network) then there isn't likely to be any problem. You could even get away without DNS, although it would be nice if you could get a sensible hostname from the DNS administrators (e.g. server.yourlab.yourschool.edu) but even without that there shouldn't be anything preventing you from running a service and having internal clients connect to it (other than policy issues, of course…). For the most part the admins wouldn't even know you're running a server.
Getting a static, non-conflicting IP address that valid for the school's network is going to be key, though.

I just got a new mac mini. Can I connect 2 monitors via dvi?

I'm using the thunderbolt port to connect an external hard drive.
I have two samsung monitors that have a dvi port and a vga port. i'd like to connect it to my mac mini, is this an option to connect with the hdmi to dvi adapter and a dvi to dual dvi splitter?
Or if you have another recommendation, please feel free to reply.
Just to be clear, I'm looking to use two monitors so i have more real estate to work with. I'm not looking for the same thing on one monitor to also be on the other.
Thanks ahead,
Line

Hello, if a splitter would work at all, it would only Mirror the same on both.
A few TB devices have a pass through that MAY work to run another Monitor... or not.

Mac Mini Snow Leopard Server - can't login with admin account

SO....i was having problems setting up network accounts from my mac Mini Server. I took it to the Apple Genius bar one night after work to get some help on why the login screen appears for Other..but could not login into any of the accounts I created.
They made an appt for me for the next morning since they had a "guy" that could help the next morning.
When I got there for my second appt..they said they don't support server issues. Only consumer products..I though the server WAS and i WAS a consumer of their products..so..they gave me a number of a consultant..of course..for pay...
So later that day I was trying some other configurations....the power came out while I was checking a monitor cable..and when I restarted I couldn't login to the master admin account.
Since mac mini server doesn't have a DVD drive..you have to boot up with their Server DVD from another computer and the Server installs it through airport.
So I did the boot up via airport from the server install DVD.
Did the Utility disk repair AND password changed. Got some error about not being to able to login if I don't change the keychains to the account.
Rebooted the server.
It didn't work.
So now stuck with a login window..and NO ACCESS to change anything.
HELP!!!!

You can access to system with root account.
If you didn't enable before, boot from SLS DVD and activate from menu (after choose language).
After that, reset all the passwords (there is a menu to do that).
After that exit from installer and reboot.
At login screen you can try to login with your user and new/blank password.
If it fails, you have to login with user root and the password you choose before.
With root user, you can access to all system, be very carefull.
Now you can create a new user and import all the files (you have to do a little work with permissions)
I hope i help you!

When I plug a LaCie external hard drive into my new Mac mini, [os 10.9.1], to use with Time Machine it effects the performance of my internet and email. Turn off Time Machine and unplug the hard drive and the internet and email are working normally again

When I plug a LaCie external hard drive to work with Time Machine into my new Mac mini, [OS 10.9.1] it drastically effects the performance of the internet and email, turn off Time Machine, unplug the hard drive, internet and email go back to normal. Why?

Maybe:
http://www.macobserver.com/tmo/article/usb-3.0-hard-drives-can-cause-wi-fi-inter ference

I just replaced my hard drive and am trying to install the Snow Leppard OS on my Mac mini using the DVD's that came with the unit. Is there a step by step procedure that will guide me through this process?

I just replaced my hard drive due to failure in my Mac mini. I am trying to load the Snow Leppard OS from the DVD's that came with the unit. Is there a step-by-step procedure somewhere that would help me? This is my first problem with my first Mac. I thought getting to the hard drive and changing it would be the hard part but I made it through that with little trouble. My lack of software experience on the Mac is really slowing me down. I believe I'm not making the right choices in the Disk Utility program.Any help would be greatly appreciated. Thank you.

Prep the new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Upon completion quit DU and return to the installer. Install OS X. When the installation has completed you can proceed to restore your data from your backups. If you have an existing backup from Time Machine or another hard drive then upon completing the Setup Assistant you will have an option to restore from another Mac, a TM backup, or another drive. Use the appropriate option.

Mac Mini / Boot Camp / XP Pro / Black Screen with DVI display

Boot camp partitioned the hard drive on my new Mac Mini and restarted after I clicked Start Installation, but came up to a black screen. No blue installation screen, nothing.
I downed it with the power button and unhooked the display from the DVI port. I went and got a VGA cable instead and hooked it up via the DVI/VGA adapter and started up again with the Option key. Chose the Windows XP Pro SP2 installation CD and it went through the Windows installation OK.
The trouble is this Norwood Micro HD17A (17" widescreen) looks TERRIBLE on VGA whether I run Windows or Mac OS, because there's no selection for 1280 x 768 resolution. It looks great on DVI both on Mac OS and in Windows once I get XP Pro to load.
After logging in to Windows I can unhook the VGA cable and adapter and reconnect the monitor using the DVI. The moment I do this Windows looks great, with native resolution supported and everything's fine. But this is a terribly cumbersome login procedure!
It seems that XP Pro has no trouble communicating with this display, provided I can get Windows to load. I contacted Apple Support but they say it's a problem with Windows, so I submitted a support request to Microsoft. I'm waiting for them to tell me it's a problem with Boot Camp or the firmware.
I've seen descriptions of very similar problems on other forums (123macmin.com) and here, but no solutions anywhere. Anybody know what's happening here?

Update: Microsoft says it's probably a problem with the hardware:
==========================================
Mark, I would like to explain that the issue should be related to the display card driver. We still need to contact the Apple support to verify if their machine has been tested under the XP environment when DVI or AVG is in use. This issue is related to Hardware and cannot be resolved from a Windows XP standpoint. Our Windows XP Support Team deals mainly with issues related to the Windows XP Operating System. Thus, we are not the best resource for this issue.
Please understand the problem may be beyond our support boundary and, therefore, our help to troubleshoot this issue is limited. Let’s contact the manufacturer who will be more familiar with their products. To contact them, please access the following link:
http://www.apple.com/support/contact/
==========================================
Meanwhile I sent Redmond the System Information in an NFO file. More as this develops!

Mac Mini Audio Intermittent over HDMI, Cuts out with Assertion in kernel.log

Hello. I've been having trouble with a mac mini (Mid 2011) that I bought on Thursday. It's running OSX 10.7. The Mac Mini is the $599 unit.
I've got it hooked up to my Sony BRAVIA HDTV (also this year's model) via HDMI, with audio configured to be delivered via HDMI to the TV alongside video. Initially the audio will play through my TV, but after an hour or two of watching something, it will cut out, and there will be no more sound coming out of the TV from the mac. Ultimately, the only way I can fix it is to reboot the Mac Mini. I've also observed that at about the same time sound cuts out, the following error message appears in kernel.log:
Aug 12 19:21:40 joshs-Mac-mini kernel[0]: Sound assertion "0 != result" failed in AppleHDAWidget at line 3957 goto handler
Aug 12 19:22:10 --- last message repeated 5 times
As far as I know, assertions failures usually mean software problems (bugs). I suspect I may be encountering a kernel-level bug in Lion, as this error message is showing in kernel.log.
The following is a list of diagnostic steps I've taken:
- I've double-checked the sound output device in preferences. It didn't spontaneously change from SONY TV (HDMI) after sound cut out.
- I've tried changing output to the internal speakers. It plays sound from the mac mini (as expected). When I change it back to HDMI, still no sound from the TV.
- I've tried turning off and back on the tv. No effect.
- I've tried unplugging and replugging the HDMI cable. No effect.
- I've tried replacing the HDMI cable with two other alternates. No effect.
- I've tried other HDMI inputs for my TV with HDMI attached. No effect.
- Note: I've got a ps3 and xbox360 on the TV that has successfully used the HDMI inputs and cables tested on. They've never had this type of problem, so I don't think there's a problem with the TV.
- I've tried rebooting the mac and resetting the "PRAM" (Command-Option-P-R before the grey screen on bootup). Sound still cuts out after a while.
- All updates are applied.
Does anybody else have any ideas about what I could try to fix this? This problem is pretty much a deal breaker, as rebooting the mac mini mid-movie kind of destroys the movie-watching experience.
Thanks

I'd just like to jump in on this thread to report exactly the same problem.
2011 Mac Mini (the 2.5GHz i5 model) running Lion, Sony Bravia TV, HDMI sounds cuts out after a while with the console error "Aug 15 18:30:25 Mini kernel[0]: Sound assertion "0 != result" failed in AppleHDAWidget at line 3957 goto handler".
Interestingly, after the error occurs, I can still get 5.1 sound through Plex, but not through Quicktime. 2.0 sound and system sounds all fail until I reboot the system.
Any help would be appreciated. I would prefer not to have to return the Mini.
Thanks.

Mac Mini Alu not work in remote desktop with no monitor connected

I've bought a new mac mini this week (but i have had the same problems with mac mini intel 2010), i use only in remote (no keyboard and no mouse). the problem is: If i have the hdmi connected to my plasma 50 samsung all work OK (also with plasma tv off). If i disconnect the hdmi cable the mac mini don't work correctly, safari and twitter app crash. Any ideas? Anyone have the same problem?
Thanks
Andrea
Message was edited by: Cybermaster

no idea?
Ty

HT1338 I bought a new Mac Mini and tried to pair my keyboard with the Mac Mini. They will not pair via Bluetooth. What is wrong?

I have recently bought a Mac Mini and tried to pair the new apple wireless keyboard with the Mac but after trying 6 times no luck. What can I do about this?

try this method:
You need at least a USB mouse. If you don't get any option to pair a keyboard, click through the setup until you get to the "Create Your Computer Account" screen, right click in any of the text fields and select Substitutions --> Show Substitutions. From there click on text preferences. The preferences pane will popup and from there you can just click the back button (next to show all) to get to the full preferences menu. Next click on keyboard, then select setup bluetooth keyboard and you're golden.

TS3824 2011 mac mini won't go past white screen with apple logo

My Mac mini won't move past a white screen with apple logo in the center. What should I do?

Hi ..
If you have v10.7 Lion installed, use Lion Recovery to repair the startup disk if necessary, or reinstall the Mac OS X.
If you are running a prior Mac OS X, boot from your install disc, run Disk Utility. The startup disk may need repairing > Using Disk Utility to verify or repair disks
And try Resetting your Mac's PRAM and NVRAM

Mac Mini with BenQ W100 Projector (No signal with DVI Dual cable)

Similar Messages

Maybe you are looking for