Mac Mini with D-Link DSL-2640T

I have a D-Link DSL-2640T and can't get it to connect to my Mac Mini.
I can't switch it (I don't think I can at least) because this is the modem/router that my ISP gave me in order to use their service. If it matters, I am in Dominican Republic right now.
The book for the router says the internal address is 192.168.1.1 and that the default username is admin, password 1234. All I am trying to do is access the router's settings so I can set up the wireless network, so that my Mini can connect to it.
I even Bootcamp-ed Windows XP into my mini to be able to get online, since it seems the router is only windows compatible when wired.
I tried to access the router settings on OS X 10.5 from Firefox and Safari, and then tried again from Windows XP, from Firefox and IE to no avail.
When the box to log in comes up it won't take the default user and pass, and I have already reset the unit a few times (sticking a pointy thing in the little hole on the side).
I don't know what else to do, and my boyfriend is not here He's teaching me well enough, but I'm still learning
Any ideas on anything else I could try?
Please and thank you :o)

Actually, the book that came with the router doesn't say how to reset, but I did it by holding the reset button for 10 seconds while powered on.
I just ran the Ethernet cable from the router to the Mini, and tried doing the hold for 10 seconds while on, then I tried the one you sent me, turning it off, holding reset, powering on, and still holding reset for 5 seconds more. Waited 30 seconds to access settings and it still won't accept any of the above combinations of username and password.
I tried each reset twice, to make sure.
One thing I haven't tried is looking into the install disk. I installed it on the XP side, but I didn't 'explore' it to see what was in it. Maybe I should do that, too, see if there is a hint anywhere there.
Thanks for trying though, I appreciate it.

Similar Messages

  • Why my new Mac mini  DVI dual link mini display port adapter doesn't work  with my 30"display (LG W3000H)?

    Hello There
    Can any of you advise on the below? Tried to connect Mac mini with a 30" display through a DVI dual link mini display port adapter. For the first try Mac mini go connected to the display, then i've chosen the highest resolution (2560x1600, native) and right at that moment they got disconected. Since then the display stays black. What can be the issue, is it possible DVI dual link mini display port adapter is not compatible with 30"display (LG W3000H)? It works with DVI male-male cable plus DVI HDMI adapter as long as the resolution stays under 1280x800. Any idea is much appreciated.
    Thank you, Vera

    Hi,
    I can report that my Mac Mini Intel Duo connected instantly and without even having to set it up (on the first try) with my 1366x768 native resolution DELL 50" Plasma Display. It's so beautiful that I just want to stand there and fondle my HDTV as I drool haplessly like Homer Simpson with a doughnut in his mouth. Seriously, no problems.... guess I bought the right cable (ebay).
    Before you buy a Duo, make sure you're aware of the airport and bluetooth issues that so many (maybe everyone who tries to use them together) are having. It seems that bluetooth interferes with airport, or maybe the other way around. Anyway, it's messed up. Also, Airport reception is generally VERY poor with the new Intel Mac Mini.
    Despite these things, I still love mine (I now have 2 base stations and an airport express for my powerhouse wireless needs, and an external DLink bluetooth-2-USB dongle solved the bluetooth/airport issues... in my case).
    FWIW,
    awk
    667-MHz Ti PowerBook G4.   Mac OS X (10.3.9)  

  • Is it possible to add a second monitor via mac mini with iMac

    Hi
    is it possible to add a second monitor via mac mini with iMac
    or is there another solution?
    all i want to know is if i can run a second monitor or link a mac mini for more speed like i heard you can with the G5 Towers.

    The iMac will allow you to connect a second monitor but that monitor will show the same thing as the iMac's built-in screen.
    You can network a Mac mini and iMac via Ethernet or Firewire.
    Software load sharing like Xgrid can allow you to share work between the Macs.

  • Connection Mac mini with lcd 32' (daewoo sensi)

    Hi
    i m trying to connect a lcd daewoo 32 to a MacMini
    this works with dvi/sub 15 but there is no access to zoom ,panorama or 14/9
    only 4/3 and 16/9 are available
    the lcd give access to these options when connected to a dvdplayer with yuv
    i bought a dvi/yuv adaptator for the macmini but there is no image on the display
    should i connect the mac mini with dvi/hdmi link to access
    Has anyone successfully connected a lcd with these options ?
    Thanks in advance

    Thanks Anne for the answer
    i allready downloaded this before posting , i'm not sure it helps
    let me try to be more specific
    the problem is to use front row on the mini with a 16/9 display (32') for films
    with the dvi/yuv adaptator , it seems that the mac ( or the card) can not send this signal . Too bad , the tv with yuv connection accepts zoom , 14/9 ...
    with the dvi/vga adaptator , the signal is ok on tv , at least for movies (1280x1024) , but the tv (plugged with vga ) does not give access to zoom , 14/9 so movies are "small"
    not overscanned , but small
    so i'm looking for somebody who plugged this successfully ( mini front row and movies in full screen ( or max available) without deformation of the image
    Another option could be dvi to composite adaptator ...but going out from the mini in dvi to display on a 1366x768 LCD does not seem to be the best

  • Why does mac mini with snow leopard download skype for windows instead of mac

    why does mac mini with snow leopard download skype for windows instead of mac ?

    Are you using this link?
    http://www.skype.com/en/download-skype/skype-for-mac/

  • Will Mac Mini with OSX Server 10.6 Snow Leopard be able to fit my needs?

    Hello,
    The office i work in is a Mac environment.
    Is this unit powerful enough to support 20 people? This is the setup i was thinking:
    Mac mini with Snow Leopard Server - 2.66GHz : Dual 500GB:
    1st Internal drive - OS only
    2nd Internal drive - OS backup via CarbonCopyCloner
    Ministack USB drive - Data backup via Time Machine (file shares etc on server from services)
    Firewire DroboPro 16TB - Client Time Machine Backups via the Network.
    Would the Mac Mini be powerfull enough to support normal OS X Server services, and at the same time act as a client Time-Machine backup via the network?
    Thanks,
    -Mike

    The answer to your question depends on how many of the services you intend to offer.
    If you are just going to use the Mini as a File, Print, and directory server, then it will work fine.
    If you intend it to run as your web, email, database, and iChat server, you might be pushing things a bit much.
    Your drive layout looks appropriate for a simple file server, so I would tentatively say yes, it looks like it would do what you currently require.
    G. Discenza

  • Mac Mini with OSX server still OK?

    HI All,
    I was going to purchase the mac mini that was geared up to work best with OSX server however that option is now no longer available and the mac mini's have downgraded slightly in terms of quadcore processors and 2tb harddrives.
    We run a small design studio, file sharing is becoming a large hinderance on workflow and I thought OSX server sounded like a good solution for someone with little knowledge of the area. We have four imacs, and three macbooks. Our team is growing fairly quick and that number should double next year.
    Any ideas would be much appreciated.
    Thanks,

    Just get the latest mac mini, add some external storage with a Thunderbolt 2 connection and that setup will work great for filesharing.
    You will get gigabit network speeds and since it's Thunderbolt 2 the mac mini will have no problem to serve those files across the network.
    Make sure you get external storage with a decent RAID setup like a Promise Pegasus for instance, and invest in a good back-up solution.
    Then clone your mac mini OSX Server setup daily towards the RAID and you're good to go!
    Get a Mac Mini with an SSD or Fusion Drive and 16GB of RAM. That'll keep you going for the next couple of years easy!
    Goodluck!
    Jeffrey

  • How to connect an external HD to a 2007 Mac Mini with FireWire

    I have a 2007 Mac Mini with a 1.83 GHz Intel Core Duo processor, 1 GB of RAM, and an 80 GB HD. I recently migrated to Snow Leopard (OS X 10.6.5) from Tiger (OS X 10.4.11). I purchased a 500 GB external HD from Seagate which I want to use to back up both my wife's notebook PC and my Apple. My Mac Mini has a Firewire 400 (6-pin) female connector on the back. The external HD can connect to a Mac via a Firewire 800 male 9-pin connector. How do I connect the male FW 800 9-pin to the female FW 400 6-pin port? This may sound obvious, but the solution is more challenging than I imagined. The 9- to 6-pin adaptors I've seen online combine a female 6-pin end with a male 9-pin end. I need the reverse of that (female 9-pin FW 800 to male 6-pin FW 400 adaptor)! I bought a 9- to 6-pin cable this week, but ended up with two male 9-pin plug ends, and no way to connect them. Is a solution available using FW, or should I bail and go with a USB 2.0 connection instead?

    Most external firewire drives have removable cables that plug into "female" ports on the hard drive. Is the firewire cabling on your external drive different from this? (What is the model number of the external drive?)
    If the cable is removeable, simply buy a 6-pin-to-9-pin firewire cable (male on both ends).
    monoprice.com is a good place to find these cheaply and in the length you need.

  • Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini

    Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini (late2014)
    im currently useing my Mac mini as a portable computer, I take it to the university and use the iMacs there as a monitor but before I can do that I have to log in to my Mac mini first which means doing it blind
    is there a way to put the IMacs into display mode with out logging into my Mac mini first
    or is there a portable monitor that I can use that will not require me to login first

    This
    Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
    says:
    How do I enable TDM?
    Make sure both computers are turned on and awake. 
    Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
    Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
    Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
    How do I exit TDM?
    To leave TDM, press Command-F2 on the keyboard of the iMac that is in TDM. You can also exit TDM if you shutdown or sleep either computer or detach the cable.
    Can I use a third-party keyboard or older Apple keyboard to enable TDM?
    Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and

  • Is there a way to run Internet Explorer on a Mac mini with mountain lion?

    I need to access a professional website that only works with IE (don't get me started on THAT) I need to do billing using this site so need to have full functionality.  Is there a way to run IE on my mac mini with mountain lion?

    The key takeaway here is that yes, you can access Windows 7 (and IE 9) from OS X Mountain Lion.
    The crucial question is about your workflow. If you need concurrent access to both Windows 7 and Mountain Lion, then the Bootcamp solution included with Mountain Lion would not be the right choice. You would need one of the virtualization solutions.
    If you need helpdesk support from a paid product, rather than entirely from a community forum, then the latest Parallel's Desktop or VMware would be a matter of choice, with Parallel's the better decision at this point. Either of these products are under $100, in addition to the cost of a Windows 7 license. You may need the Windows 7 installation media as an .ISO file, rather than on DVD. Check requirements.
    By example, I use Oracle's VirtualBox (free) on Mountain Lion, with a Windows 7 Home Premium 64-bit guest. The interactive and network performance of this Windows guest are more than adequate on my 2011 mini. I assigned 3 GB memory and 2 of 4 processor threads to the Windows 7 guest. I also restricted guest CPU use to 80%. VirtualBox is installed on my SSD, but the Windows guest is on an external HDD. That is not a default configuration. There are multiple choices for display; from full-screen 1920x1200 (mine) to an isolated resizeable window, to seamless integration with OS X. The Apple keyboard, bluetooth devices (trackpad/mouse), and printer all are recognized. I also have a shared OS X folder with VirtualBox, and copy/paste integration.
    I use VirtualBox as it meets my support (forum) and functional requirements.
    Best wishes,

  • How do I set up my Time Machine and Mac Mini with Lion Server so i have one wifi loop in the house?

    HELP!
    So I have had a Time Machine wifi loop at the house for approx. 6 years. I run two Macbooks, 2 iPhones, 2 iTouch and a Samsung Smart Blueray on the loop.
    I just bought a Mac Mini with Lion Server. When setting it up I'm not sure what or how I managed to do, but I now have 2 wifi loops, one doesn't lock and niether will support the Samsung BlueRay. Also, each time I want to go online with one of the other Mac devices i have to relog into the wifi loop.
    Can someone please walk me through the fix. The mac Mini is plugged straight into the Time Machine to recevie its internet connection.
    Thanks!
    John

    You often see this limit of 10 clients in wireless hotspots but I have yet to see it in an adsl modem.. most strange way to pay for a service that is really irrelevant how many clients you use.
    Have a go .. I recently setup a TC to help a guy run his Roku.. and this setup worked well.. I have no idea if it can work in your case.
    Lets say the IP you get is 192.168.2.1-10 .. doesn't matter what it really is. And the adsl modem is 192.168.2.254
    (Assuming they are private addresses.. if they are public IP you can just use the DHCP and NAT. )
    But go to the airport utility.. I think you need to run v5 at least to change DNS.. but you can do the same thing in v6 using static but no dns changes.
    Now you set the IP of the TC manually.. This address might need to be in the dhcp range of the modem to work. You can set the DNS to same IP as the router address.. ie home address of the modem. Or you can use another DNS.. whatever you like.
    Then set DHCP for clients that will join.. this can then expand the scope of addresses..
    It worked without a NAT error.. although I am not sure exactly how.. on paper it should not be able to work but did.. have a go.. otherwise there is perhaps another way.. but it is complicated.
    Give us an example from a computer plugged into the modem of what IP .. subnet mask .. Gateway and DNS you get. Then I can fine tune the values for it.

  • Can I use my iMac with a thunderbolt connection as an Display for my new Mac Mini with thunderbolt ??

    Can I use my new Mac Mini with Leopard and thunderbolt in connection with my new iMac as a display ?

    If it's a 27" iMac. I don't believe Target Display Mode is supported on the 21" model. But not with a Mac Mini running Leopard. It would need to be running Lion.

  • How can I control my my mac mini with my macbook air (no wifi)?

    How can I control my my mac mini with my macbook air (no wifi)? Also...what is the best method (less lag) for screen sharing? 
    I own a mac mini Quad Server 2.0 i7 and I use it for audio production.  It's great but I need to travel with it. I was hoping some form of screen sharing could be useful using the macbook air to control the mac mini.  Therefore, I'd be using the stronger processor of the mac mini but would still be using the keyboard and trackpad from the air. 
    My two problems: 
    1.  I can't depend on wifi to make this happen. Wifi is not always available when travleing.  What would be the best way to configure a LAN connection?
    2.  The less lag the better for screen sharing.  Which apps are fastest?
    Thanks in advance.

    Both of your devices have WiFi built in. Here is Apple Support's solution:
    http://support.apple.com/kb/TA25616?viewlocale=en_US&locale=en_US

  • I have a mac mini with a web cam/microphone and would like to be able to facetime with my families iPhones 4S/5 using wi-fi email address.  I can't call the iPhones from the Mac Mini with Mountain Lion OS.  What is wrong?

    I am trying to include a Mac Mini with a webcam/microphone to call several family iPhones 4S/5 usisng email addresses vice phone numbers so that we can communicate from outside the US via iPhone to the US (Mac Mini) via wi-fi and email addresses.  We are using the same email address for the Mac Mini as for Itunes and made new email addresses for each of the iPhones.  I cannot receive calls from the iPhones but can call the iPhones from the Mac Mini.  what needs to be corrected?
    Thanks.
    Steve

    Hi Steve,
    Thanks for visiting Apple Support Communities.
    You may find some useful suggestions in these articles:
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/ts4185
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/ts3367
    Have a great day!
    Jeremy

  • Cannot install windows 7 on brand new mac mini with 256 g sdd? Please help.

    Cannot install windows 7 on brand new mac mini with 256 g sdd? Please help.
    Have tried all tricks found on the net and followed every advice from apple support.
    Still black screen with blinking curser when mini is rebooting following partitioning via bootcamp.
    Very nice and fast mashine, wouldnt like to return it.
    thanks allan

    Is that an Apple SSD?
    what model is it?
    Is there a firmware update if non Apple?
    Lion is not server version.
    Windows is ? ISO or retail?
    Google macmini Windows 7 SSD Apple Boot Camp

Maybe you are looking for

  • MSSQL connection with PHP in DW

    Hello, I know that DW 8 has a built-in connection when using php with a mysql database. However, I would like to connect to a remote Microsoft SQL Server with DW and php. Is there a way to make this connection ? Probably not built-in but maybe throug

  • 2nd and 4th Generation iPod shuffles show as corrupt on new iMac

    My 2nd and 4th gen shuffles are showing as corrupt when syncing with my new iMac, but work just fine when syncing with the prior iMac we just replaced. I took the Shuffles to the Apple store and they confirmed no issues with the devices. I have read

  • It gives me the following message and will not let me enter admin to delete it.

    http://prueba212.businesscatalyst.com/Error.aspx?aspxerrorpath=/AdminConsoleXT/#dashboard

  • Question about using views in joins

    I have a question that is related to views. When a view is joined with another table, how does Oracle internally handle it? Does it create a temporary table that contains the resultant rows of the view and join that temorary table to the other table

  • AR Invoice printing without adding

    we are asking suggestions- how to stop printing AR Invoice without adding the samwe in the SAP.. Client is in urgent need of the solution. Employees are printing the invoice without posting. it is a great problem