Mac mini with maverick keeps hanging

I am new to Apple and recently purchased a Mac Mini with a keyboard, trackpad and mouse attached to an HP monitor.  I have been using it for a few weeks with no problems and updated to Maverick 10.9.1 without problems.  I have since added photos to iPhoto and now it seems that when I have been using my Moneydance program or my email it freezes and the round rainbow ball appears so that I can't do anything in that program unless I switch the whole computer off and start again. Is it to do with Maverick or one of the programs?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after  you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful.

Similar Messages

  • My new mac mini with Maverick does not go to deep sleep even if i press power button or Apple-Sleep mode.

    Hi.
    I have my new mac mini with Maverick that does not go to deep sleep even if i press power button or menu Apple-Sleep mode. He goes only to something like stand-by  (power lid is on; after i turn off and then turn on the power he does not wake up just starting). I tried "sudo pmset -a hibernatemode X", tried mode 0,1,3, and even 25. nothing helps. he goes to deep sleep (when all data on HDD) only first time after i change hibernatemode couple times and force it to sleep. Today i even tried to force it to sleep (menu Apple-Sleep mode) and NOT turn off the power for whole night, in the morning he is in this "stand-by" mode anyway.
    Could anyone help me please? i need it sleep but don't want to keep my power on for whole night.

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.
    If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

  • Mac Mini with Mavericks Windows Server Access Permissions Problem

    We have a Mac Mini that was running Lion. This machine was joined to our Active Directory network using Beyond Trust’s PowerBroker Identity Services add-on. This had been working fine with no issues.
    We recently had to change the permissions on the file server (Windows Server 2012) for one of the directory branches. The share permissions are set to Modify and the file permissions were set so the user of the Mac had full control over the files.
    The Mac then started experiencing a problem where it could not open some of the files on the network this only affected certain files or folders. A couple of other machines we have running Mavericks who are not domain joined had no problems accessing the files when connected to the share as the same user.
    I then upgraded the Mac to Mavericks after removing the Beyond Trust software. The Mac was then re-joined to the domain using the native support of Mavericks. This fixed the problem temporarily and by this all seems fine for maybe one or two hours and then suddenly you cannot access files anymore.
    When I looked at the permissions of a file that could not be opened it was showing the same user name twice. One with r/w access and the other with Custom. If the Mac was re-booted the problem would disappear again for another hour or so but then come back.
    Thinking the issue was with the AD integration yesterday I took the Mac off the domain and just left it as standalone connecting to the server. The local user accounts that were from the AD user have been deleted so there is now only Administrator, Guest (disabled) and the user. This has not fixed the problem.
    What I have noticed is that while it is working when you look at the permissions on the file through finder they say “You have custom access”. When it is broken the permission change to showing the user multiple times, etc.
    I have reset the permissions on the server a number of times and it makes no difference.
    I am assuming that when it is working the Mac is reading the permissions correctly from the Windows Server and then it suddenly decides to use some other set of permissions it is getting locally to the files.
    Does anyone have any idea how I can fix this?
    Thanks

    Both OS X and OS X Server can host Subversion (SVN), yes.  That's been possible for many years, and there are directions posted around the 'net for downloading and installing and setting up the Subversion server.
    Distributed source code control packages (and links from there) — such as Mercurial and particularly git — would be some of the more common and newer technologies used here.  These too can be installed on OS X and OS X Server.
    On the 'net, Subversion, git, Mercurial, Bizaar and other distributed packages are all platform-independent.  The remote clients don't know and don't care about the type of server hosting the repository.
    As for your Mavericks Server question — and quoting directly from this Apple web page, and thus permitted to be posted here — "The new features in Xcode Server make it easier than ever for a Mac or iOS development team to create robust, reliable software, thanks to continuous integration, testing, and repository hosting services."    (Beyond this quote and any other officially-public Apple statements or public Apple presentations, you'll have to be a registered Apple Developer to gather more information and potentially access to the previews, as OS X Mavericks and Mavericks Server and Xcode 5 are all presently under NDA.)

  • HP Printer update keeps getting reinstalled. Mac mini with Lion.

    I have a new Mac mini with Lion and the HP Deskjet all-in-one printer with scanner that came with a rebate so I got it for free. When I check for new software I get a notice that there is an update to the HP printer driver (I think it is v 5.7). I go ahead and do the update and it says it was installed. When I check later on for new software the same update shows up, as if I never did the upgrade. What gives?

    Thanks for the feedback. Since I did the original post I found the solution by searching the community for "HP Update". Someone posted that you need to delete a folder within the Library folder and then do the update again. The deleted folder for the HP Printer will wind up in the trash, but you need to reboot the Mac before you can empty the trash.

  • Mac mini with 10.6 installed - dual boot 10.8?

    Hi all
    I have an a Mac mini with 10.6.8 installed (think it came with 10.5) and would like to buy Mountain Lion from the Apple Store and install it as a dual boot setup. I think the hardware is too old for 10.10 (although it does give me the option to download it from the App store). I would like to keep my existing install and install 10.8 either alongside 10.6 or on a separate partition. Couple of questions;
    Can I shrink the partition that contains my existing 10.6 install (there is plenty of space on the disk), create another partition and install 10.8 onto it?
    Failing that can I install 10.8 alongside 10.6 on the same partition (like we used to do for OS9 and OSX)?
    For 10.8 I will be receiving a "content code" for the Mac App Store - once I download the files and start the install presumably the Mac will restart and I will get access to the usual install utilities (without the OS running)?
    Many thanks for any help.

    If your computer will run Mountain Lion, it will run Yosemite.
    1. Yes.
    2. I would go with 2 partitions.
    Yes.
    Check that your computer is compatible with Mountain Lion/Mavericks/Yosemite.
    To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
    Mac mini (Early 2009 or newer) model number 3,1 or higher
    Your Mac needs:
    OS X v10.6.8 or OS X Lion already installed
    2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
    8 GB or more of available space
    Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.      
    Application Compatibility
    Applications Compatibility (2)
    Do a backup before installing.

  • If I bought my Mac mini with Lion already loaded, is it necessary to upgrade to OS X to Mountain Lion?

    if I bought my Mac mini with Lion already loaded, is it necessary to upgrade to OS X to Mountain Lion?

    For you maybe, but Mavericks is better than Mounatin Lion for me, not to mention that is free.
    I still maintain a Snow Leopard partition for some older software, but see no need to keep a partition for either Lion or Mountain Lion.
    IMHO, yours may vary.
    P.S., I think most will agree that Mounatin Lion was superior to Lion.

  • Mac Mini with OSX server still OK?

    HI All,
    I was going to purchase the mac mini that was geared up to work best with OSX server however that option is now no longer available and the mac mini's have downgraded slightly in terms of quadcore processors and 2tb harddrives.
    We run a small design studio, file sharing is becoming a large hinderance on workflow and I thought OSX server sounded like a good solution for someone with little knowledge of the area. We have four imacs, and three macbooks. Our team is growing fairly quick and that number should double next year.
    Any ideas would be much appreciated.
    Thanks,

    Just get the latest mac mini, add some external storage with a Thunderbolt 2 connection and that setup will work great for filesharing.
    You will get gigabit network speeds and since it's Thunderbolt 2 the mac mini will have no problem to serve those files across the network.
    Make sure you get external storage with a decent RAID setup like a Promise Pegasus for instance, and invest in a good back-up solution.
    Then clone your mac mini OSX Server setup daily towards the RAID and you're good to go!
    Get a Mac Mini with an SSD or Fusion Drive and 16GB of RAM. That'll keep you going for the next couple of years easy!
    Goodluck!
    Jeffrey

  • Mac.Mini and Mavericks failure

    Hey there,I am trying to upgrade a 2011 mac mini to.mavericks. The installer quits with a failure notice and then restarts only to fail again. I am stuck in the loop. Does anyone have any advice on this situation. Thanks for any help and advice.

    we tried a few other things and then made an appt at the apple store.We went out and were home fairly quickly,unbelievable imo. They had to completely erase and then reinstall. The test they ran told us it was a software issue so then we knew it was most likely fixable. We brought it home and we seen to be fine.
    It was a bad install I guess. I did everything the exact same way but somehow it got locked in this loop.
    There was no charge and our helpers were great. I am gonna be install shy for a while though.
    thanks again linc. Sorry I cant tell you some of the tech terms we were hearing.

  • I friend has given me his original copy of Photoshop Elements 11.  It will not load on to my computer. Mac. mini. I keep getting will not initialize.

    I friend has given me his original copy of Photoshop Elements 11.  It will not load on to my computer. Mac. mini. I keep getting will not initialize.

    I own the businesses, so there are no restrictions. Even my personal page has the same problem. I've been working on FB for years with no access problems. Ironically, the problem started the day the FB IPO went public. At first, the "freeze" happened when I tried to view a photo. Now it happens virtually every time I try to do anything: view a friend's page, try to use "chat."
    I'm at a loss. I would view it as a blessing, except that too many of my "friends" and family only use FB to communicate. I'm afraid that's how the world is today, and we can't turn back the clock.

  • Mac Mini i7 (Mavericks) will not boot from the external drive

    Mac Mini i7 (Mavericks) will not boot from the external drive with Disk Warroir 4.4. or Drive Genius or Lion.
    Not even from the external Firewire hard drive with Mavericks

    Does the external HD have a GUID partition table?
    Is the external drive formatted Mac OS X Extended (journaled)?
    Is this a 2011 or late 2012 Mac?
    How was Mavericks installed on the external drive?
    Who is the builder of the drive mechanism in the external drive?
    Who is the builder of the external enclosure?
    What type of interface does the external drive have USB2, USB3, Firewire 400, Firewire 800, thunderbolt?
    Is the external enclosure directly connected to the mini?
    Have youtried a different interface cable?

  • Sync mac mini with iPad mini

    Hello,
    i have my Mac Mini running Maverick and my ipad mini with the latest IOS7 version, i can't sync my ibook files. can somebody tell me how to do it?
    i am trying to transfer from my ipad mini to my mac mini.

    Yes, this issue has appeared on some very long discussions, but I'll give you the short answer here. Books purchased in the iBooks store should be syncing across devices just fine.  The issue is with PDFs and ePub books obtained elsewhere.
    Even though books are no longer stored in iTunes once you use iBooks on your Mac, you still need to use iTunes to sync them. The iTunes book section is now gone, but when you have your phone or iPad plugged in or connected over WiFi with iTunes look at the tabs for the iOS device.  You will see a Books tab that has syncing options for all or selected books.  Once you select what you want to sync and do a sync, your books should be on your iPad Mini.
    Oops, I see you were actually trying to do the opposite of what I did, so this may be a little backwards, but I think the syncing will still occur.  Also, if you're referring to purchased content from Apple, maybe you just need to turn on some of the iCloud syncing options on your minis.
    Good luck!  (I just learned this today.)

  • Will Mac Mini with OSX Server 10.6 Snow Leopard be able to fit my needs?

    Hello,
    The office i work in is a Mac environment.
    Is this unit powerful enough to support 20 people? This is the setup i was thinking:
    Mac mini with Snow Leopard Server - 2.66GHz : Dual 500GB:
    1st Internal drive - OS only
    2nd Internal drive - OS backup via CarbonCopyCloner
    Ministack USB drive - Data backup via Time Machine (file shares etc on server from services)
    Firewire DroboPro 16TB - Client Time Machine Backups via the Network.
    Would the Mac Mini be powerfull enough to support normal OS X Server services, and at the same time act as a client Time-Machine backup via the network?
    Thanks,
    -Mike

    The answer to your question depends on how many of the services you intend to offer.
    If you are just going to use the Mini as a File, Print, and directory server, then it will work fine.
    If you intend it to run as your web, email, database, and iChat server, you might be pushing things a bit much.
    Your drive layout looks appropriate for a simple file server, so I would tentatively say yes, it looks like it would do what you currently require.
    G. Discenza

  • How to connect an external HD to a 2007 Mac Mini with FireWire

    I have a 2007 Mac Mini with a 1.83 GHz Intel Core Duo processor, 1 GB of RAM, and an 80 GB HD. I recently migrated to Snow Leopard (OS X 10.6.5) from Tiger (OS X 10.4.11). I purchased a 500 GB external HD from Seagate which I want to use to back up both my wife's notebook PC and my Apple. My Mac Mini has a Firewire 400 (6-pin) female connector on the back. The external HD can connect to a Mac via a Firewire 800 male 9-pin connector. How do I connect the male FW 800 9-pin to the female FW 400 6-pin port? This may sound obvious, but the solution is more challenging than I imagined. The 9- to 6-pin adaptors I've seen online combine a female 6-pin end with a male 9-pin end. I need the reverse of that (female 9-pin FW 800 to male 6-pin FW 400 adaptor)! I bought a 9- to 6-pin cable this week, but ended up with two male 9-pin plug ends, and no way to connect them. Is a solution available using FW, or should I bail and go with a USB 2.0 connection instead?

    Most external firewire drives have removable cables that plug into "female" ports on the hard drive. Is the firewire cabling on your external drive different from this? (What is the model number of the external drive?)
    If the cable is removeable, simply buy a 6-pin-to-9-pin firewire cable (male on both ends).
    monoprice.com is a good place to find these cheaply and in the length you need.

  • Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini

    Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini (late2014)
    im currently useing my Mac mini as a portable computer, I take it to the university and use the iMacs there as a monitor but before I can do that I have to log in to my Mac mini first which means doing it blind
    is there a way to put the IMacs into display mode with out logging into my Mac mini first
    or is there a portable monitor that I can use that will not require me to login first

    This
    Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
    says:
    How do I enable TDM?
    Make sure both computers are turned on and awake. 
    Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
    Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
    Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
    How do I exit TDM?
    To leave TDM, press Command-F2 on the keyboard of the iMac that is in TDM. You can also exit TDM if you shutdown or sleep either computer or detach the cable.
    Can I use a third-party keyboard or older Apple keyboard to enable TDM?
    Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and

  • Is there a way to run Internet Explorer on a Mac mini with mountain lion?

    I need to access a professional website that only works with IE (don't get me started on THAT) I need to do billing using this site so need to have full functionality.  Is there a way to run IE on my mac mini with mountain lion?

    The key takeaway here is that yes, you can access Windows 7 (and IE 9) from OS X Mountain Lion.
    The crucial question is about your workflow. If you need concurrent access to both Windows 7 and Mountain Lion, then the Bootcamp solution included with Mountain Lion would not be the right choice. You would need one of the virtualization solutions.
    If you need helpdesk support from a paid product, rather than entirely from a community forum, then the latest Parallel's Desktop or VMware would be a matter of choice, with Parallel's the better decision at this point. Either of these products are under $100, in addition to the cost of a Windows 7 license. You may need the Windows 7 installation media as an .ISO file, rather than on DVD. Check requirements.
    By example, I use Oracle's VirtualBox (free) on Mountain Lion, with a Windows 7 Home Premium 64-bit guest. The interactive and network performance of this Windows guest are more than adequate on my 2011 mini. I assigned 3 GB memory and 2 of 4 processor threads to the Windows 7 guest. I also restricted guest CPU use to 80%. VirtualBox is installed on my SSD, but the Windows guest is on an external HDD. That is not a default configuration. There are multiple choices for display; from full-screen 1920x1200 (mine) to an isolated resizeable window, to seamless integration with OS X. The Apple keyboard, bluetooth devices (trackpad/mouse), and printer all are recognized. I also have a shared OS X folder with VirtualBox, and copy/paste integration.
    I use VirtualBox as it meets my support (forum) and functional requirements.
    Best wishes,

Maybe you are looking for

  • I do not have 'Iminent' in my list of programs to uninstall. I want rid of the thing ! HOW?

    I have been using Firefox for several years and have enjoyed it, first off; however, I have become aggravated enough with the last 2 updates to ditch it, if it can't act right. I have tired to uninstall that pesky Iminent search, followed instruction

  • Image Links To Emails

    Hi designed my site in photoshop, moved it into dreamweaver....i need to make a image link into outlook(contact us button). is this possible? i'm not using css, just dreamweaver straight up importing from photoshop. Thanks

  • ADVANCED_SEARCH_SET_BY_DATE_TIME_FIELD

    Small bug in AppDefEditor (JHS 10.1.3.3.75)? templateIdentifier="ADVANCED_SEARCH_SET_BY_DATE_TIME_FIELD" is not used. I suppose because it should be ADVANCED_SEARCH_SET_BY_USER_DATE_TIME_FIELD, this one is used, but not shown in Application Definitio

  • SCCM 2012 R2 Won't PXE Boot

    I'm trying to get PXE booting to work on our SCCM 2012 R2 server and am getting the dreaded "PXE-E53: No Boot file Name Received."  DHCP server is in same subnet on a different machine, so supposedly no DHCP options or ip helpers are necessary.  I'm

  • Diadem V9.1 SP2c - Dataplugin VBOX "*.vob" File - "Racelogic_VBO.uri" - installer - NI-USI.msi

    Hi, I tried to install the "Racelogic_VBO.uri" Dataplugin in Diadem V9.1/SP2c! During installation there was a message  that "NI-USI.msi" was not found. In the description there was Diadem V10.0 mentioned as supported Software!? I've installed "usiUF