Mac mini with Mountain lion fails to load and mount the os-10.6.3 install disk

I'm trying to use the hardware test utility that should be on the applications disk. When I put in either the install or application disk the drive kicks it out again after 15 or 20 seconds. These disks will both load on my imac (late 2009) but of course won't install anything.
Is this normal behavour or do I have a hardware problem?
In addition I boot from my Mountain lion usb recovery drive but find nothing about the hardware testing utility local or online.
I wanted to test memory. Used memtest and shows no errors. I also want to test everything else too.

Thanks much folks for the replies and ideas.
Here is more info that should have been in my first post.
The mini is late 2009.
It ejects the install os 10.6.3 original disks without mounting them BUT will load and mount any other dvd or cd that I have tried video, music or data. When either of the Apple disks are inserted the drive does a low pitch vibration for several seconds then stops. It repeats about five times then ejects. No other disks vibrate this way. The apple disks for the mini do not vibrate or eject in the iMac. They load and mount normally.
I looked for an update for the EFIboot and couldnt see anything that I thought mached the mini.
I have tried the NVPRAM reset with no change in behavour.
Doing a startup with d key doesn't find the AHT. I assume if it is on the mac-HD it would be found and run.
There doesnt seem to be one on the recovery USB drive that I created.
I did upgrade from SL to ML, no erase.
BDAqua, I'm not sure what you mean, "In fact, do 3 in a row, takes a bit of time." Should I do 3 NVRAM resets in a row?
I haven't tried the cleaning kit since all other disks give no problems or errors that I know of.

Similar Messages

What is good greeting card software for my mac mini with Mountain Lion OS X 10.8.1? I want a wide range of existing templates such as Hallmark and Printshop offer, but can't find for this version OS X.

For my Mac mini with Mountain Lion OS X 10.8.1, what is a good greeting card software download with lots of templates and graphics?

Hi simon2010,
as far as I can see, I have resolved it...
Just so I didn't write over my functioning disk in the Mac mini, I took it out and put a spare one in. (Would have saved me going back to the Apple store to get it re-imaged if it did fail.)
I created a Mountain Lion installer on an 8GB USB stick, and first installed 10.8.4 (the latest at the current time) on my MacBook Pro... it worked fine, so I knew the installer stick had no problems at all (that's one thing to rule out of the list of potential causes).
With my spare hard disk in the Mac mini, I then went to try to install 10.8.4 on it, with my 16GB non-Apple RAM in it. It failed as usual in the way I expressed originally.
I then just swapped my 16GB RAM for the original Apple 4GB RAM (2x2GB sticks) which I put back in the machine, and I tried re-installing. No problem whatsoever - it installed perfectly.
It's the RAM! Even though my RAM works perfectly once installed, the Apple OS installer refuses to proceed if Apple RAM is not in. I put my 16GB RAM back in after installing the OS and all is fine.
I'm quite surprised Apple has done this.
Have you changed the RAM? Let me know if it's the same problem or you have some differences.
I assume it will install fine if I put the orignal HD back in, again if I have the original Apple RAM in of course.
PS. Also to note, the point where it failed in the installer with my 16GB RAM in, with the original Apple RAM in it took an incredibly long time towards the end of the bar moving across the screen; it says "5 minutes remaining" for at least 15, maybe 20 minutes, but gets past it eventually, then does a reboot to continue its install.

Is there a way to run Internet Explorer on a Mac mini with mountain lion?

I need to access a professional website that only works with IE (don't get me started on THAT) I need to do billing using this site so need to have full functionality. Is there a way to run IE on my mac mini with mountain lion?

The key takeaway here is that yes, you can access Windows 7 (and IE 9) from OS X Mountain Lion.
The crucial question is about your workflow. If you need concurrent access to both Windows 7 and Mountain Lion, then the Bootcamp solution included with Mountain Lion would not be the right choice. You would need one of the virtualization solutions.
If you need helpdesk support from a paid product, rather than entirely from a community forum, then the latest Parallel's Desktop or VMware would be a matter of choice, with Parallel's the better decision at this point. Either of these products are under $100, in addition to the cost of a Windows 7 license. You may need the Windows 7 installation media as an .ISO file, rather than on DVD. Check requirements.
By example, I use Oracle's VirtualBox (free) on Mountain Lion, with a Windows 7 Home Premium 64-bit guest. The interactive and network performance of this Windows guest are more than adequate on my 2011 mini. I assigned 3 GB memory and 2 of 4 processor threads to the Windows 7 guest. I also restricted guest CPU use to 80%. VirtualBox is installed on my SSD, but the Windows guest is on an external HDD. That is not a default configuration. There are multiple choices for display; from full-screen 1920x1200 (mine) to an isolated resizeable window, to seamless integration with OS X. The Apple keyboard, bluetooth devices (trackpad/mouse), and printer all are recognized. I also have a shared OS X folder with VirtualBox, and copy/paste integration.
I use VirtualBox as it meets my support (forum) and functional requirements.
Best wishes,

After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer.

After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer. The rainbow wheel was runnig 8 hrs and I turn off mac mini by power button, then I turn on mac mini with key Shift and p/w, checked HD. My HD has
capacity 499.25 GB used 86.91GB. Is there a solution to fix this problem axcept the reinstall os?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
sudo defaults read com.apple.loginwindow LoginHook | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 4
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit
Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

I have a mac mini with a web cam/microphone and would like to be able to facetime with my families iPhones 4S/5 using wi-fi email address. I can't call the iPhones from the Mac Mini with Mountain Lion OS. What is wrong?

I am trying to include a Mac Mini with a webcam/microphone to call several family iPhones 4S/5 usisng email addresses vice phone numbers so that we can communicate from outside the US via iPhone to the US (Mac Mini) via wi-fi and email addresses. We are using the same email address for the Mac Mini as for Itunes and made new email addresses for each of the iPhones. I cannot receive calls from the iPhones but can call the iPhones from the Mac Mini. what needs to be corrected?
Thanks.
Steve

Hi Steve,
Thanks for visiting Apple Support Communities.
You may find some useful suggestions in these articles:
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
Have a great day!
Jeremy

Created three new users without Apple IDs and they can't log into either of my Macbook Pro or Mac Mini running Mountain Lion.

I have created three new users without Apple IDs and they can't log into either of my Macbook Pro or Mac Mini running Mountain Lion. These accounts are for my kids and originally were setup with parental controls and time constraints. Thinking this was the problem I removed the time constraints, removed the parental controls, deleted and re-added them, and made them standard users. I have reinstalled, used disk utility to repair permissions, and made them admins. Any help is appreciated.

Users don't need Apple ID's. That's not the issue. Have you tried repairing permissions their accounts?
http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/
Repairing User Permissions in OS X Lion
You’ll need to reboot to perform this, and then use the same resetpassword utility that is used to change passwords in Lion, but instead choosing a hidden option.
When you use the Disk Utility app and Repair Permissions — it doesn’t actually repair the permission settings on folders and files in your Home folder where your documents and personal applications reside.
In Lion, there is an additional Repair Permissions application utility hidden away. This tool is located inside boot Repair Utilities. Here’s how to access it.
Restart Lion and hold down the Command and R keys. You will boot into the Repair Utilities screen. On top, in the Menu Bar click the Utilities item then select Terminal.
In the Terminal window, type resetpassword and hit Return.
The Password reset utility launches, but you’re not going to reset the password. Instead, click on the icon for your Mac’s hard drive at the top. From the drop-down below it, select the user account where you are having issues.
At the bottom of the window, you’ll see an area labeled ‘Reset Home Directory Permissions and ACLs’. Click the Reset button there.
The reset process takes a couple of minutes. When it’s done, quit the programs you’ve opened and restart your Mac. Notice that ‘Spotlight’ starts re-indexing immediately.

I have a new mac mini with mt lion where is the os on this computer

I have a new mac mini with mt lion where is the os on this computer. It came with Mt Lion on it

You have a couple of options for booting OS X.
One is to use the OS X Recovery Disk Assistant to copy the Mountain Lion Recovery HD to a USB thumb drive. A 4GB thumb drive is sufficient as the Disk Assistant only needs 1GB.
A second option would be to use a cloning software like SuperDuper or Carbon Copy Cloner to clone your existing Macintosh HD to an external USB drive. This would give you an external bootable copy of what you have now.

HT1338 when I updated my mac mini to mountain lion it gave me an icon on my desktop of a hard drive, can I delete this?

when I updated my mac mini to mountain lion it gave me an icon on my desktop of a hard drive, can I delete this?

Open the General tab of the Finder's preferences and set it not to be displayed on the desktop. Alternatively, if it's a disk image or external disk, just drag it to the Trash.
(83576)

Is my mac compatible with mountain lion?

is my mac compatible with mountain lion? Serial Number #W8******XAG
<Edited By Host>

Computer compatibility:
http://support.apple.com/kb/HT5444
http://applehelpwriter.com/2012/08/03/will-mountain-lion-work-on-my-old-mac/
Model Number:
http://www.mactracker.ca/index.html
http://support.apple.com/kb/HT1635 (Macbook model numbers)
Applicationc Compatability. Power PC applications are not supported. You can partition your hard drive so you can run PC applications:
http://roaringapps.com/apps:table

QuickTime need codec to play avi on MacBook Pro retinal display but not on other Mac's with Mountain Lion?

Why will avi play on all my Mac's with Mountain Lion but not on my Retinal Display 13" Macbook Pro? Quicktime players are the same, OS are the same plugins are the same and up to date. Get the missing Codec warning only on retinal display.

You don't say if your MacBook Pro is the new version that supports USB 3, if not the card reader will default to USB 2. The Ultra II is listed as 10Mb/s on old cards and 15MB/s on new cards, both within USB 2 specification. Extreme III are listed as 20MB/s old cards and 30MB/s new. These 30 MB/s maybe a bit too much for USB 2, not sure. see http://kb.sandisk.com/app/answers/detail/a_id/1111
If the Macbook Pro as USB 3 support it could be that it does not recognise the card reader as USB 3 and default to USB 2.
See Apple URL http://support.apple.com/kb/HT5172?viewlocale=en_US&locale=en_US
Bullet point 11 may help.
Of course the card reader could be faulty and not read the Extreme III cards unless you have verified it working in other situations.
regards

Hi! is it possible that Logic X has upgrades that work only with mavericks and does t work in mountain lion....since in my macbook pro with mavericks i have new views of the equalizer, etc and in my mac pro with mountain lion it still the old view...

Hi! is it possible that Logic X has upgrades that work only with mavericks and does t work in mountain lion....since in my macbook pro with mavericks i have new views of the equalizer, etc and in my mac pro with mountain lion it still the old view...

Any OS version of 10.8.4 or later has all features that are not OS depended. The plugins are one example. You probably haven't updated all versions of Logic Pro X to the latest one.

Why does my iMac with Mountain Lion fail to print.

My iMac with Mountain Lion fails to find my 2 networked printers on 50% of the occasions I try to print. Even though I have earlier switched the iMac on, the only way I can get the iMac to see the printers is to restart the iMac? After that I have no more probs. Leaving the iMac on standby overnight doesn't seem to help as the problem frequently re-occurs the next day
The Brother Laserjet printer and iMac are cabled to my router, while the HP Photoprint uses wi-fi connection. There is a PC/Windows 7 also on the network which shares the printers.
I seem to get no help from the Printer utilities in system preferences.
Any suggestions what I need to do to eliminate this apparent breakdown in communication between the printers and my iMac.

Hello Mike17swr,
Thanks for the post. I'm not sure which model of Photosmart printer that you have connected, but I have included a link below with some great t-shooting steps to help identify the issue. Good Luck!
http://goo.gl/HeZm3
I work for HP but my posts and replies are my own....Thank you!

Is upgrading to Mac OS X Mountain Lion applicable to other countries, like the Philippines?

Is free upgrading to Mac OS X Mountain Lion applicable to other countries, like the Philippines?

This is because you're looking at the wrong page, the US Apple web page, instead of the one for the Philippines:
You need to use this page, then click on the icon for the Philippines: http://www.apple.com/asia/osx/uptodate/

I request the code for the exchange of Mac OS X Mountain Lion, on 25 July and still I do not get the validation email, what should I do? :/

request the code for the exchange of Mac OS X Mountain Lion, on 25 July and still I do not get the validation email, what should I do?
ANYBODY HELP ME!!

same problem here.....
anyone can help?

I bought a mac mini with Lion pre-installed. If I upgrade my mac mini to Mountain Lion, am I free to install Lion on my older macbook using the mini license?

I currently have two macs. A 2008 macbook which is running Snow Leopard, can run Lion, and cannot run Mountain Lion. I also have a mac mini which came with Lion pre-installed. I plan on upgrading my mini to Mountain Lion when it's available. After I upgrade, it seems like I should be able to install Lion on my macbook using the license that came with my mini.
I have found many articles about making a DVD or bootable USB drive to recover, or install Lion onto other macs. So, I am not tied to the mac app store. And I am not worried about how to install Lion onto the macbook.
I have also read a few discussions about upgrading using pre-installed Lion license. From what I've read, if someone buys Lion through the app store, they can install it on all of their macs. But, if they have a machine the came with Lion pre-installed they can only use Lion on one machine. However it is unclear if that license can be transferred to another machine.
Another common answer that I have seen is, "Don't be cheap! Just buy Lion throught the app store." This is not about money, I'm interested in the technical challange, and the leagal question.
Does anyone have experience with this, or opinions?

If your machine came with Lion preinstalled, you cannot use it on another machine. It is tied to the machine it came with. You are allowed to make a one time transfer of the OS when you sell the machine as long as it remains with that machine.
If you purchase Lion from the app store, you are free to install it on as many Macs as you own - however, if/when you sell one of those Macs, you are required to uninstall Lion as the license is not transferable and you need to reinstall the original OS.
You can read the SLA for yourself - the link to the downloads to all licenses is here:
http://www.apple.com/legal/sla/

Mac mini with Mountain lion fails to load and mount the os-10.6.3 install disk

Similar Messages

Maybe you are looking for