Mac mini with Slot loadind old skool imac

Before I go ahead and buy a Mac mini, has there been any compatability problems with old skool macs of the slot loading variety?

It's a problem because the iMac has no 'video in' port, so you can't simply feed the mini's video out into it. The only way this would work is if the mini were connected by firewire and used as an external drive on the iMac (which is a very expensive way of getting an external drive) or by networking the two systems and in effect controlling the mini from the iMac - basically using the iMac to display a window within which the mini runs. This works, but it really doesn't give you a particularly elegant or functional solution in the same way that simply adding a suitable VGA or DVI display to the mini itself would.
Since pretty much any VGA display will work with a Mac mini, it seems to me a better idea would be to obtain an inexpensive display if funds are tight, and add that to a 1.66 mini, preferably with 1Gb RAM for good performance. That way, a better display can be used when funds allow, and additional storage added with external drive(s) as and when needed, thus allowing you to build a remarkably powerful system in reasonably manageable steps.

Similar Messages

  • Using a Mac Mini with an iMac (11,1)

    Hi,
    I am considering buying a Mac Mini to replace an old netbook I use as a development server.  The old netbook runs Ubuntu and was a cheap but excellent machine that I utilized to develop customized software.  Unfortunately that machine is starting to fall apart and I am considering replacing it with a Mac Mini instead of another cheap netbook.  However, the price difference is considerable (about 2x) so I am looking to keep the cost down by only buying the Mac Mini and using my iMac to initially set up the machine on the network.  What I want to do is use the iMac’s screen, keyboard and mouse to first connect to the Mini, set up it up to connect to my network and activate the ability to remotely access the Mini.  Once I do that, I can use screen sharing to operate the Mini whenever necessary, correct?  However, I am unsure if my iMac (model 11,1) can be utilized as a target display for the Mac Mini.  If I connect the Mac Mini to my iMac’s DisplayPort, will I be able to do what I want?  And what about my keyboard and mouse?  Do I have to unpair them from the iMac and pair them with the Mac Mini to be able to control the Mac Mini (only the first time I do this...).  Anyone have any experience or thoughts they could share?

    That's correct.  It's sooooo much simpler to just borrow a keyboard/mouse from a PC or have another set for pairing.  It's tricky getting the existing set off the iMac and on to the Mini, first you have to have it on the iMac to enter Target Mode Display, (CMD F2).  Now how do you disconnect or unpair it from the iMac?  If you turn it off and on, it reconnects to the iMac,  If you disconnect it before switching, you can't enter TMD...  then the problem of getting it back...
    Too many headaches, I just borrowed a usb mouse/keyboard off a PC to config and then returned it. 

  • Mac mini with a 24" display or a new iMac 24"?

    Hi,
    Since Apple releases the new iMac, and at the same time, updated the mini, I'm wandering where my heart should go.
    I like the iMac, a little bit more powerful, better video card and not sharing memory with main memory, better BTO (bigger HD, faster HD too, memory, etc) iSight and mike, and so on so on. I have not seen one yet, but I'm still puzzled by the glossy screen. Many article I read said that it is a like or not based on personal taste and environment you put it in. I bought a Sony display 2-3 years ago, which I returned, because of the glossy screen. The images were very clean and very fun too work on, but I could not endure to see my face in the screen continuously. That's what I'm afraid about the new iMac.
    So far so good, I read the article on http://www.macworld.com that compare the new mini C2D with an iMac, and while it is less performant it is still a good performer. Only a few points below the iMac. So...
    Choosing a mini with a 24" of my choice with the same resolution as the iMac will cost me around the same (maybe a few hundred $ less), but I'll have a smaller/slower HD and not a dedicated video card. I'm wandering if the larger screen resolution will affect the mini performance? Sure, for the HD space, I can use an external HD on firewire. Maybe even boot from it and use the internal and slower disk for backups (like TimeMachine for instance).
    I do not play game, or very occasionally, I'm doing iLife/iWork stuff, and Internet surfing. I want the larger screen, as I like to have spaces to play with, but I'm afraid the mini will suffer the higher resolution.
    In the long run, the display will stay mine, when I ever decide to change my computer, while buying the iMac mean I'll drop the display and buy a new one. There's pros and cons to all of this...
    So I'd like to heard from people having the new (or even older) mini to let me your impression of what you feel about this.
    Thanks in advance.

    If you are not able to actually examine an iMac carefully before you buy, the risk that the glossy screen may not suit you is a real issue which has to be considered. Imagine that you bought one and found it to have the same problem as the Sony display you tried and had to return?
    Ultimately, the actual performance of the system is remarkably unimportant in most situations. The majority of users and uses would not show markedly different operability between a brand new Mac Pro and older G5, even though in terms of specification and benchmarking, the two are like chalk and cheese. The fact is that while the Mac Pro would be greatly faster, OS and software, not to mention the user him or herself, are all quite inefficient.
    What that means is that the difference in performance between the iMac and the mini is certainly measurable, and in use would show itself in some ways (the iMac would run smoother for example) but without the ability to sit them side by side, as a user you'd really never know. Bearing in mind that the new minis are way faster than the old G5s which were themselves screamingly fast when they were in production (and still are), it's hard to imagine that a mini would fail to impress.
    And since the actual performance of the system isn't all that crucial, what IS vital is to ensure that the system you buy is usable. The devices that matter most in that respect are the bits you, as the user, interface with. Keyboards and mice are reasonably cheap and easy to change, but displays are not when they are fixed and integral to the system.
    The downside of the mini is twofold: Firstly that the internal drive is 5400rpm, thus relatively slow. In reality this really doesn't matter all that much, particularly not if you go for 2Gb RAM. It's been criticized for it's speed, but on the other hand, it's the same as the best laptops, users of which don't seem to have problems with the drive speed. It can be got around of course with a fast external drive, used to boot the system.
    Secondly, the integrated graphics - not because that's really limiting in any absolute sense (except for gamers) but because as time goes by, more and more of the top-end software is likely to exclude systems with integrated graphics from their minimum specification list. There aren't many like that yet, and it's hardly likely to be a widespread problem, but it does mean you have to consider what software you want to run as part of the equation.
    If I were in your situation, I'd not consider spending money until I had looked at the iMac and given myself some time to work with one. The fact it has a glossy screen doesn't mean it WILL have the same problem as the Sony display had, and slight changes in the ergonomics of your desk with the iMac on it rather than the system with the Sony display previously may mean that even if it did prove reflective, it may be far less of a problem (or more of course). I would look to buy the best system with the best specification that fit within my budget (after all, it has to meet your needs for some time, even as they change), thus if the iMac screen was good, that would be the system I'd go for. If there were any sense that the reflective properties of the screen were going to be a problem, I'd dismiss it as an option immediately, and focus on either the lowest cost Mac Pro if one of those were within the budget, and if not, a Mac mini with bumped up RAM and your choice of screen.

  • Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini

    Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini (late2014)
    im currently useing my Mac mini as a portable computer, I take it to the university and use the iMacs there as a monitor but before I can do that I have to log in to my Mac mini first which means doing it blind
    is there a way to put the IMacs into display mode with out logging into my Mac mini first
    or is there a portable monitor that I can use that will not require me to login first

    This
    Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
    says:
    How do I enable TDM?
    Make sure both computers are turned on and awake. 
    Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
    Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
    Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
    How do I exit TDM?
    To leave TDM, press Command-F2 on the keyboard of the iMac that is in TDM. You can also exit TDM if you shutdown or sleep either computer or detach the cable.
    Can I use a third-party keyboard or older Apple keyboard to enable TDM?
    Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and

  • Got Lion with new Mac mini and want to install on imac

    Hi,
    I just bought a new mac mini with lion. and now i want to install Lion on my imac.
    Is there a way to register my purchase of lion on appstore so i can download it from there?
    //Stefan

    You'll have to pay for the App Store version of Lion needed for the iMac.  The license for Lion  that you get  with a new computer is different from the App Store license, and doesn't provide for multiple installations.
    From the Lion Software License Agreement, which you can download from here:
    http://www.apple.com/legal/sla
    2. Permitted License Uses and Restrictions.
    A. Standard and Preinstalled Apple Software License. Subject to the terms and conditions of this License, unless you obtained the Apple Software from the Mac App Store or under a volume license, maintenance or other written agreement from Apple, you are granted a limited, non-exclusive license to install, use and run one (1) copy of the Apple Software on a single Apple-branded computer at any one time. For example, these standard single-copy license terms apply to you if you obtained the Apple Software preinstalled on Apple- branded hardware.
    B. License from Mac App Store. If you obtained a license for the Apple Software from the Mac App Store, then subject to the terms and conditions of this License and as permitted by the Mac App Store Usage Rules set forth in the App Store Terms and Conditions (http://www.apple.com/legal/itunes/ww/) (“Usage Rules”), you are granted a limited, non-transferable, non-exclusive license:
    to download, install, use and run for personal, non-commercial use, one (1) copy of the Apple Software directly on each Apple-branded computer running Mac OS X Snow Leopard or Mac OS X Snow Leopard Server (“Mac Computer”) that you own or control;

  • Can I use my iMac with a thunderbolt connection as an Display for my new Mac Mini with thunderbolt ??

    Can I use my new Mac Mini with Leopard and thunderbolt in connection with my new iMac as a display ?

    If it's a 27" iMac. I don't believe Target Display Mode is supported on the 21" model. But not with a Mac Mini running Leopard. It would need to be running Lion.

  • I have replaced my old Mac Mini with new one.  What should I do about my Time Capsule?

    With the old Mac Mini (2009 model) I used Time Machine and a Time Capsule to back up everything on the Mac Mini itself and on external hard drive I added when I needed more storage space.  I've replaced the old Mac Mini with a 2011 model, and migrated the contents of the old one to the new one from Time Machine. 
    I'm now trying to figure out what I should do to my Time Capsule and/or Time Machine to make backups going forward of the same content, now on my new Mac Mini and same external hard drive. 
    When I go into Time Machine, it does not seem to recognise the items on the external hard drive as ones that I can backup (or not, as there were some items there that I did not and do not wish to backup to Time Capsule) through the new Mac Mini. 
    I am uncertain too whether the Time Machine/Time Capsule will recognise the items of my old Mac Mini as the same ones that are now on my new Mac Mini and save changes there, or whether it will try to save all over again all the same items, as they are now on a different computer. 
    My inclination is to clear out the contents of the Time Capsule now and start all over again.
    I have looked through information provided by Apple but not found answers to my questions.

    The situation concerning the hard drive is complicated.  It is not included in the list of Excluded Items.
    If the drive is not "Excluded", then it must be included.  That is the way that Apple's software works.
    But, nor am I given the option to select it or any of the items in it for adding to the list of Excluded Items.
    If you want to add an item to the list of Excluded items, click the + button at the bottom of the Excluded list, then navigate to select the drive to add it. Once the drive has been added, you can go back in and select the items.
    When I go into the exclude from backup area and select the hard drive, it and the items in it appear in dimmed form, but I cannot select them.
    Sorry, I do not understand what you are trying to say here.
    What I want to do, but cannot, is what I did before, select one of the items in it not to be backed up and leave the rest to be backed up
    I have no idea how you were able to do this. As long as I can remember, Time Machine will not allow you to pick and choose items on a drive to be backed up or excluded. Your option is to have the entire drive backed up, or the entire drive to not be backed up.
    have not seen the 'Quick Erase' option.
    You would use AirPort Utility to erase the Time Capsule drive. Open AirPort Utillty and click the Disks tab at the top of the screen. Then, click Erase Disk.  The Quick Erase option will appear.

  • Is it possible to add a second monitor via mac mini with iMac

    Hi
    is it possible to add a second monitor via mac mini with iMac
    or is there another solution?
    all i want to know is if i can run a second monitor or link a mac mini for more speed like i heard you can with the G5 Towers.

    The iMac will allow you to connect a second monitor but that monitor will show the same thing as the iMac's built-in screen.
    You can network a Mac mini and iMac via Ethernet or Firewire.
    Software load sharing like Xgrid can allow you to share work between the Macs.

  • Have mac mini with thunderbolt monitor 1yr old, recently updated with new 10.0.2 from apple, now iMovie doesn't seem to support my Sony HDR-XR500 camera. Is there any help on this?

    Have mac mini with thunderbolt monitor 1yr old, recently updated with new 10.0.2 from apple, now iMovie doesn't seem to support my Sony HDR-XR500 camera. Is there any help on this?

    haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.

  • Mac Mini with OSX server still OK?

    HI All,
    I was going to purchase the mac mini that was geared up to work best with OSX server however that option is now no longer available and the mac mini's have downgraded slightly in terms of quadcore processors and 2tb harddrives.
    We run a small design studio, file sharing is becoming a large hinderance on workflow and I thought OSX server sounded like a good solution for someone with little knowledge of the area. We have four imacs, and three macbooks. Our team is growing fairly quick and that number should double next year.
    Any ideas would be much appreciated.
    Thanks,

    Just get the latest mac mini, add some external storage with a Thunderbolt 2 connection and that setup will work great for filesharing.
    You will get gigabit network speeds and since it's Thunderbolt 2 the mac mini will have no problem to serve those files across the network.
    Make sure you get external storage with a decent RAID setup like a Promise Pegasus for instance, and invest in a good back-up solution.
    Then clone your mac mini OSX Server setup daily towards the RAID and you're good to go!
    Get a Mac Mini with an SSD or Fusion Drive and 16GB of RAM. That'll keep you going for the next couple of years easy!
    Goodluck!
    Jeffrey

  • Mac mini with 10.6 installed - dual boot 10.8?

    Hi all
    I have an a Mac mini with 10.6.8 installed (think it came with 10.5) and would like to buy Mountain Lion from the Apple Store and install it as a dual boot setup. I think the hardware is too old for 10.10 (although it does give me the option to download it from the App store). I would like to keep my existing install and install 10.8 either alongside 10.6 or on a separate partition. Couple of questions;
    Can I shrink the partition that contains my existing 10.6 install (there is plenty of space on the disk), create another partition and install 10.8 onto it?
    Failing that can I install 10.8 alongside 10.6 on the same partition (like we used to do for OS9 and OSX)?
    For 10.8 I will be receiving a "content code" for the Mac App Store - once I download the files and start the install presumably the Mac will restart and I will get access to the usual install utilities (without the OS running)?
    Many thanks for any help.

    If your computer will run Mountain Lion, it will run Yosemite.
    1. Yes.
    2. I would go with 2 partitions.
    Yes.
    Check that your computer is compatible with Mountain Lion/Mavericks/Yosemite.
    To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
    Mac mini (Early 2009 or newer) model number 3,1 or higher
    Your Mac needs:
    OS X v10.6.8 or OS X Lion already installed
    2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
    8 GB or more of available space
    Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.      
    Application Compatibility
    Applications Compatibility (2)
    Do a backup before installing.

  • Mac Mini with OS 10.4.9 running Appleworks 6

    I am running a Mac Mini (Intel) OS 10.4.9 and have installed Appleworks 6 which I had from my old G3. The problem is, my microsoft mouse will not scroll up and down on a document. Now then, this new Mac Mini is my wife's and she needs the scrolling feature. I also have the same Mac Mini with Appleworks 6 installed and the mouse scrolling feature works fine. This did not come easy as when I first got my Mac Mini, I spent a lot of phone time with an excellent tech rep at Apple. He made it oh, so simple. I just can't remember how he did it.
    My current call to Apple tech support came to the conclusion that I need to take my wife's Mac Mini to a "Apple Genius Store" (if I can find it) and have them try and get the mouse scrolling to work. By the way, I have tried the iWork trial thing and perhaps I'm set in my old age, but I do like Appleworks 6 much better. Thank you for reading and considering my question.
    Mac Mini 1,1   Mac OS X (10.4.9)  

    There's nothing at all wrong with preferring APpleWorks and wanting to continue using it. It's a bit unfashionable these days, but there are many people who have discovered how powerful, flexible and easy it is to use and continue to use it despite the development of alternatives!
    Of course, it does have the drawback of not being intel native, so performance on intel-based Macs will be relatively poor in comparison to iWork, but if that doesn't cause you any problems in use, then it's purely a matter of what you want to use not what anyone else thinks is appropriate!
    That said, what exactly is the problem? Can you scroll by clicking the scroll arrows and dragging the scroll bar, but not by using the mouse wheel?

  • Original Mac Mini with Samsung P2770h LCD

    Yesterday I picked up a Samsung P2770h from CostCo. Swapped out my old Viewsonic 22" LCD and it worked perfectly on my Windows 7 system, but not my Mac.
    I've tried booting in Safe Mode, but nothing appears on the display. I've tried DVI-DVI and DVI-HDMI.
    I've tried booting with the Viewsonic and then swapping the cable to the Samsung, but apart from an occasional flicker, I have a blank display
    I checked the ATI website for new drivers for the Radeon 9200, but it said Apple provides them.
    I vaguely remember having to change a setting when I first got the Viewsonic, but I can't seem to find the information.
    Any help is much appreciated. The new display is so good on my Windows 7 system, but if I can't get it to work on my Mac it will probably go back !!!
    Thanks,
    Steve

    Ok, after several hours more testing, I am making some progress. By logging in to the Mac remotely using LogMeIn I can see what is going on even if the Samsung monitor goes blank. I can successfuly set the Mac screen resolution to anything, except the native 1920x1080 The next highest is 1600x1200 and it works fine, but is far from ideal. So my conclusion so far is that the graphics card can't support 1920x1080 which is disappointing, but not that surprising given the fact that this Mac Mini is 5 years old !!! But I'm hoping someone more knowledgeable will prove me wrong
    Thanks.

  • Try to load new iPad Mini with reserve copy from my iMac

    Hi,
    Try to load new iPad Mini with reserve copy from my iMac coming from my iPhone 4S.
    When selecting the copy I can not find the just made copy from my iPhone 4S.
    I see tree others, but not the latest from iPhone 4S.
    Is there a max on copies showed ??
    Please advise,

    As far as I know there is no limit to the number of backups that you can store in iTunes as long as you have the available storage capacity on the Mac. I have at least 10 or 12 backups in iTunes for my iPad and iPod Touch. Every time that you restore from a backup - a time and date stamped backup is created that cannot be overwritten. I must have 8 of those backups on my Mac.
    Did you look in iTunes>Preference>Devices to see if the backup is really in there?

  • Can I use Mac Mini with an S-video input?

    I'm considering a Mac Mini because I have a young child who is mostly blind, but is at the age where he needs to start learning to use a computer.  I want to go with Apple (I have been PC my whole life) because of the excellent VoiceOver features baked into the OS--- Windows doesn't have anything comparable.
    I'd like to wire this thing up to my HDTV, because my child does have some vision and the 52" screen will actually provide useful images to him; but it's a nearly 15 year old HDTV that does not have an HDMI input, just S-Video and RCA plugs.
    Is there an acceptable adapter out there that will allow me to use the Mac Mini with S-video or RCA plugs without having to buy a new 50+" TV just for the Mac Mini?

    I found this.
    http://www.ebay.com/itm/USB-PC-MAC-VGA-to-TV-Composite-S-Video-Adapter-NTSC-PAL- /260775797195
    You may be able to find others by more Googling
    You will also need a mini-display port to VGA adopter for the Mini. It plugs into the Thunderbolt port on the Mini

Maybe you are looking for