Mac mini won't auto-sleep (via energy saver)

I've tried almost everything! SMC reset, PRAM reset, scheduled works fine but the energy saver settings don't. I'm only getting a screen shut but the little lamp in the mini does't fade in and out. help please.

I'm having the same problem. I just got my Mini this weekend.
After setting it up initially, the energy saver sleep worked fine.
And I haven't installed too many things since. I did an upgrade of various mac apps through the software updater and I installed a shutterfly plugin for iPhoto but nothing else really.
I didn't notice exactly when it stopped working.
The only thing I have connected via USB is the mouse/keyboard/speaker through KVM.
Even though I had those from the beginning, I'm going to try connecting them directly to the mini.
Other than that, I only have a network share setup with my Windows machine.
Any updates from the OP or others with the same problem would be great if you've gotten yours fixed.

Similar Messages

Won't automatically sleep with energy saver

Brand-new iMac will not automatically sleep, but will sleep on demand. Display sleeps, but hard drive stays on.
I'm not completely computer-savvy, but I've searched through other threads regarding this issue and tried the following:
- deleted com.apple.PowerManagement.plist
- reset SMC
- tried with a new admin account
- reset PRAM/NVRAM
- disconnected peripherals
- repaired file permissions
- Bluetooth settings: changed to not discoverable, turned off bluetooth sharing. I still need it on though bc my KB and mouse are wireless
Not really sure what the Console/system log stuff is, but I looked in there and saw this over and over:
+May 23 09:43:45 greatwhitehope com.apple.launchd[1] (com.google.keystone.daemon[394]): bootstrap_register() erroneously called instead of bootstrapcheckin(). Mach service: com.google.Keystone.Daemon+
+May 23 09:43:45 greatwhitehope com.apple.launchd[1] (com.google.keystone.daemon[394]): Exited with exit code: 1+
+May 23 09:43:45 greatwhitehope com.apple.launchd[1] (com.google.keystone.daemon): Throttling respawn: Will start in 10 seconds+
So I turned off Google Notifier. Didn't work.
It works with Please Sleep... but I just got this computer and it kind of ****** me off that it won't auto-sleep.
Can anyone please help or offer other suggestions?

I have the same problem and I've already contacted Apple about it. We've tried the same solutions as listed above and some more. Finally I had to record my system info during the problem (with Capture Data) and I've sent it to Apple.
The good news is that they know the problem and they are working on a solution.
The bad news is that I've bought my computer in February, I immedeately reported the problem, and there does not seem to be any progress. I contacted Apple again early May and they told me I should wait
I'll try the Sleep apps that are suggested above because it's extremely irritating the have your computer awake with fan and all when you want to sleep yourself.

Mac Mini won't sleep automatically using energy saver

I can't make my mini sleep using energy saver. The monitor will go to sleep the mac continues to stay on. I can manually put the mac to sleep by pushing the power button or by selecting sleep in the menu options. This occurs even if nobody is logged in.
I've tried unplugging all USB, Firewire, and Ethernet devices. That made no difference. I assume it has to be an application that's running continuously in the background, but I don't know how to narrow it down to the right one.
Suggestions?

You can try using Utilities > Activity Monitor to see what processes are most active, also look at Disk Activity.

2010 Mac Mini won't sleep

Hello, everything was working fine until I accessed my mac mini from my old iMac G4 to share some files. Now my new Mac Mini won't sleep. Here is what I have done. Ejected the Mac Mini on the iMac. Turned off the iMac, stopped sharing everything on the Mac Mini including files, my printer and iTunes media and reset the PRAM. Still the Mac Mini won't sleep. It's set to it's defaults of 10 minutes to sleep the monitor and itself but only the monitor goes to sleep after the 10 minutes. Very frustrated...

Hello Euchre and thank you for replying. I have unchecked all the boxes within the "Sharing" options that I checked some time ago. When I did that, sharing was automatically turned off. Still I am having the issue. I'll try putting the monitor at 9 minutes and the computer at 10 to see if that works. I'll be back. Thanks again, Ed

Mac Pro does not auto-sleep (manual sleeping if fine!)

I have a small annoyance with my 2009 (Nehalem) Mac Pro I am wondering if someone can help with, or suggest something, please:
The Mac Pro does not auto-sleep; ever. I have played around with the sleep time settings, and enabled or disabled the 'sleep drives' option, but to no avail. Mac Pro will stay on, no matter if I am logged on OR even on the 'log on users' screen.
That said, I can sleep the Mac Pro manually at any time, and without any problems; it stays asleep without a hitch, and wake-up is flawless.
There is nothing in the console log that would tell me why the auto sleep doesn't function. I deleted the sleep plist and re-set, but again, no change.
Any ideas? Not sure what could signal the system to not do auto-sleep?
It's running 10.6.3.
Cheers,
Dan

Exactly the same problems as those described above: forced sleep works (by using the power button or closing the lid) but automatic sleep doesn't (using 'Energy Saving' preferences).
Tried every single piece of advice here and on other posts: reset PRAM/ SMC, verified disc, repaired permissions, deleted the power saving preference files, cleared caches & history, restarted in every conceivable mode... The only things that worked were safe boot and creating a new user account which means it must be a software issue.
Disabled/ removed/ paused/ reinstalled every piece of software I could but to no avail. The most frustrating thing? Having to wait for 5 mins every time I tried something to check whether the damned thing was going to go to sleep.
In the end, and in desperation, I took the advice of Dino X and downloaded PleaseSleep. Success! A genius piece of software. It forces sleep when the Energy Saver preferences cut in but, even if I don't set exceptions, it won't force sleep if there's a DVD playing (for example).
Only had the Mac for a few months and I'll never go back to that other, unmentionable operating system; the Mac's just too good but I'm vexed that I'm having to use third party software to get it to work as it should (and was) - feels like a bit of a Win*s solution to me.

Mac mini won't boot anymore

My Mac mini won't boot anymore. It's been running fine for months.
It's running Leopard Server 10.5.2 Build 9C31
It starts to boot, I get the first spinning gear with the gray screen, then the blue desktop blinks, then a second spinning gear on a gray screen and it appears to hang (the gear stops spinning).
I booted off the install DVD, ran disk utility, repaired the HD, repaired the permissions: the behavior is the same.
Safe mode doesn't work (same hang as above).
Single user mode does work.
I can connect to it via Server Admin while it appears hung.
The last few lines of the system log are:
May 15 18:38:58 server emond[67]: SetUpLogs: uid = 0 gid = 0
May 15 18:38:58 server emond[67]: SetUpLogs: opening /Library/Logs/EventMonitor/EventMonitor.error.log
May 15 18:38:59 server kextd[23]: writing kernel link data to /var/run/mach.sym
May 15 18:39:09 server KernelEventAgent[59]: tid 00000000 received unknown event (12)
May 15 18:39:20 server kernel[0]: display: Not usable
May 15 18:39:20 server com.apple.KerberosAutoConfig[126]: Kerberos configuration is up to date
May 15 18:39:20 server com.apple.ATSServer[125]: FODBCheck: New annex file created
May 15 18:39:21 server ARDAgent [130]: ******ARDAgent Launched******
May 15 18:39:21 server com.apple.KerberosAutoConfig[132]: Kerberos configuration is up to date
May 15 18:39:22 server ARDAgent [130]: call logout from LoginLogoutProxyCallBackFunction
May 15 18:39:22 server com.apple.launchd[1] (com.apple.RemoteDesktop.agent): Throttling respawn: Will start in 9 seconds
May 15 18:39:24 server loginwindow[58]: Login Window Started Security Agent
May 15 18:39:29 server servermgrd[53]: servermgr_calendar: created default calendar virtual host
May 15 18:39:31 server ARDAgent [146]: ******ARDAgent Launched******
May 15 18:39:32 server ARDAgent [146]: ******ARDAgent Ready******
May 15 18:39:33 server mdworker[109]: (Error) SyncInfo: Boot-cache avoidance timed out!
May 15 18:39:54 server Python[47]: CGImageSourceCreateWithData data parameter is nil
May 15 18:39:54 server com.apple.wikid[47]: Thu May 15 18:39:54 server.jeff.carpenter.name Python[47] <Error>: CGImageSourceCreateWithData data parameter is nil\n
May 15 18:39:56 server kernel[0]: AppleYukon2 - bad packet received. length: 1440, packet status bits: MII error
May 15 18:39:56 server kernel[0]: AppleYukon2: 00000000,00000001 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
May 15 18:49:54 server kernel[0]: serialnumberd 194 FSWRITEDATA SBF /dev/dtracehelper 13 (seatbelt)
May 15 18:49:54 server kernel[0]: serialnumberd 194 FSREADDATA SBF /dev/autofs_nowait 13 (seatbelt)
May 15 18:49:54 server kernel[0]: serialnumberd 194 FSREADDATA SBF /usr/sbin 13 (seatbelt)
May 15 18:55:12 server kernel[0]: AppleYukon2 - bad packet received. length: 23, packet status bits: MII error
Any ideas?

Yes, it's been running Server since I purchased it.
I doubt the serial number is in use elsewhere: I purchased the 10-user version at a retail store in a sealed package and I've only installed it once.

I cannot get the new mac mini to wake from sleep and trigger the displays - this is the second mac mini I have had and both have had the same issues. It worked before on my macbook extremely well...

I cannot get the new mac mini to wake from sleep and trigger the displays - this is the second mac mini I have had and both have had the same issues. It worked before on my macbook extremely well...
Using 2 displays, connected via HDMI and thunderbolt
Been on to support a number of times now - is anyone experiencing the same issues?

BUMP.
I actually showed this to Apple geniuses when I took my computer to the apple store, and it's still here. In console it says:
kernel[0]: Previous Shutdown Cause: -128
I don't know if that's related or not, but maybe helps?

My Mac Mini won't get past the initial startup screen with the Apple logo. What can I do?

After a long distance move, my Mac Mini won't startup past the logo screen. What can I do?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
     a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, boot from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My mac mini won't start up!

My mac mini won't start up but it will turn on, staying at the gray apple logo screen and nothing else.
I came home yesterday and it wouldn't 'wake up' from 'sleep' mode so I turned it off and tried to turn it back on. There's a netflix cd in there that I also can't get out. My friend suggested i slip a piece of paper in there and that it will eject, but this isn't working (maybe I'm doing this wrong?)
help! thanks.

I have the same problem. In addition, the same happens when attempting to boot from a DVD. I was able to boot it up in Target Disc Mode, and even erase the internal HD entirely, but I still cannot boot from DVD to reinstall the OS. I have tried the SMC reset, but to no avail. Also, while I can reset the PRAM, I cannot reset the Open Firmware. Any suggestions?

Mac Mini won't boot up.

Mac Mini won't boot up! Just getting blank white screen, any ideas why? No apple, just a blank screen. It worked fine last night.

Have you tried booting into the Recovery HD by pressing/holding COMMAND+R at system start or the Option/Alt key and choosing Recovery HD to boot into?
If you can get into the Recovery HD, open Disk Utilities and Verify Disk. Repair if necessary.

Mac Mini won't start and constantly makes disc ejecting noise

My Mac Mini won't start. It was working fine, then just locked up and won't start again. When I push the start button it just makes this repeated disc ejecting noise from the DVD drive. It doesn't make the chime noise or display anything on the monitor. I've disconnected the optical drive, but it didn't help. Then it just doesn't start at all. I thought that if I would disconnect the optical drive, that it would ignore it and just boot off the hard drive, but nothing happened. The power light comes on. Then, if I hold down the power button for 10 seconds it shuts down. The fan operates. It just never attempts to boot up. I can't put in a system DVD because the optical drive is just in eternal eject mode.
If you have any suggestions let me know. Thanks.

I have the same situation.
I think the drive thinks it has a disc to eject or part of the mechanism is stuck and can't return to it's resting position. I was going to disconnect as you tried but now I think I'll try to disassemble the drive to see if there might be some debris jamming things up.
Please let me know if you solve the problem.

Mac mini won't connect to my wireless router!

I just bought my mac mini server then connected it to wifi, then after 2 weeks I had to go abroad for a week so I just turned off the switch connecting to my mac, without switching off my mac mini server. then when I get back home my mac mini won't connect to my wifi. I tried everything from manually setting up IP and DHCP nothing works. What happened?
thanks for help,
Jakarta

I didn't reset the machine/router itself because 2 of my computer is still connected to wifi-and working perfectly, but the mac mini server cannot connect to wifi.
what I did was to set up the "networking utilities"-having said that, what I did was to connect all over again to wifi, this did not work. I did tried to change from DHCP to manually set up IP, neither of these didn't work.
I'm now stucked!
Message was edited by: asea

Mac Mini won't start after installing OS X 10.6.3

My Mac Mini won't start after installing Mac OS X Snow Leopard 10.6.3. When I turn it on, the Apple logo appears and the initialization line starts to fill, but it suddenly stops. It does that again and stops at the same point, but this time it shuts down. What should I do?

If you are coming from 10.5.8, hopefully you backed up your important data first. Your mini will need at minimum, 1 GB of RAM to install Snow Leopard and at least 5 GB of storage remaining on your boot drive.
I treat 10.6.3 as a fresh, full install over a 10.5.8 system. That means I choose Disk Utility from the Installer's menu and repartition the boot drive as a single partition, Mac OS X Extended (Journaled) format, and use the GUID partition scheme from the options button. At this point, while still in Disk Utility, I would verify the drive under First Aid.
Then I turn the installer loose, and reboot into a working 10.6.3 system, ready for the software updates that take the machine to 10.6.8.
So, following the above guidelines, reinstall 10.6.3.

My Mac mini won't recognize photo library in itunes so I can download pics from library and free up space in memory, I was able to download camera role but not photo library that takes up more space.

My Mac mini won't recognize iphone 4 photo library in itunes so I can download pics from library and free up space in memory, I was able to download camera role but not photo library that takes up more space. Help thanks

The photo sync is one-way: Computer to phone. Photos synced to your phone will have to be extracted from your phone using third-party software, if you want them on your computer, as Apple makes no provision to do so. Since you're using a Mac, you can use this:
http://www.ecamm.com/mac/phoneview/

Mac Mini won't boot after failed XP installation

Recently upgrade HD to 320GB 7200 rpm and 3GB ram. Running 10.5.8 fine.
I tried to install Windows XP through Boot Camp, but wasn't successful, I terminated the installation. Then Mac Mini won't boot up. When powered on, you heard the chime, then grey screen showed and stayed. Tried starting with "C" (boot from CD), "OPT" (boot option), "T" (target), and reset PRAM. None of them worked.
What should I try next?
Thanks
Message was edited by: Yijian Cao

If you install XP on Bootcamp, your startup disc will be changed to XP Windows partitioned you did. To restore your startup disc back to Mac OS, make sure your Mac is turned off. 1. Plug the power back and press the power button ON. When you hear the power On sound, press and hold the ALT key on your keyboard until you see the hardrives. 2. Select the HD that says MAc OS, then your mac will boot back to Mac OS.
Let me know if you have more problems, maybe I can help.
Abel

Mac mini won't auto-sleep (via energy saver)

Similar Messages

Maybe you are looking for