Mac Mini Won´t Burn CD´s

I have an old G4 PPC Mac Mini running Mac OS X 10.3, and whenever I try to burn a CD, it starts to write it then says something like ´An error has occured´. It does this no matter what type of content is being burned. How can I fix this problem.

Tanner
I just had to deal with this exact prob on my 1.5 G4 Mini. I was getting a "laser calibration error" when using Disk Utility. Heck, even Toast crapped out on me.
After reading some threads, I blasted compressed air (via attached straw) back and forth through the disc slot. Fixed it right up. Remember to shake the can up REALLY good, so you get air and not liquid, spraying out.
HTH

Similar Messages

Mac mini won't boot anymore

My Mac mini won't boot anymore. It's been running fine for months.
It's running Leopard Server 10.5.2 Build 9C31
It starts to boot, I get the first spinning gear with the gray screen, then the blue desktop blinks, then a second spinning gear on a gray screen and it appears to hang (the gear stops spinning).
I booted off the install DVD, ran disk utility, repaired the HD, repaired the permissions: the behavior is the same.
Safe mode doesn't work (same hang as above).
Single user mode does work.
I can connect to it via Server Admin while it appears hung.
The last few lines of the system log are:
May 15 18:38:58 server emond[67]: SetUpLogs: uid = 0 gid = 0
May 15 18:38:58 server emond[67]: SetUpLogs: opening /Library/Logs/EventMonitor/EventMonitor.error.log
May 15 18:38:59 server kextd[23]: writing kernel link data to /var/run/mach.sym
May 15 18:39:09 server KernelEventAgent[59]: tid 00000000 received unknown event (12)
May 15 18:39:20 server kernel[0]: display: Not usable
May 15 18:39:20 server com.apple.KerberosAutoConfig[126]: Kerberos configuration is up to date
May 15 18:39:20 server com.apple.ATSServer[125]: FODBCheck: New annex file created
May 15 18:39:21 server ARDAgent [130]: ******ARDAgent Launched******
May 15 18:39:21 server com.apple.KerberosAutoConfig[132]: Kerberos configuration is up to date
May 15 18:39:22 server ARDAgent [130]: call logout from LoginLogoutProxyCallBackFunction
May 15 18:39:22 server com.apple.launchd[1] (com.apple.RemoteDesktop.agent): Throttling respawn: Will start in 9 seconds
May 15 18:39:24 server loginwindow[58]: Login Window Started Security Agent
May 15 18:39:29 server servermgrd[53]: servermgr_calendar: created default calendar virtual host
May 15 18:39:31 server ARDAgent [146]: ******ARDAgent Launched******
May 15 18:39:32 server ARDAgent [146]: ******ARDAgent Ready******
May 15 18:39:33 server mdworker[109]: (Error) SyncInfo: Boot-cache avoidance timed out!
May 15 18:39:54 server Python[47]: CGImageSourceCreateWithData data parameter is nil
May 15 18:39:54 server com.apple.wikid[47]: Thu May 15 18:39:54 server.jeff.carpenter.name Python[47] <Error>: CGImageSourceCreateWithData data parameter is nil\n
May 15 18:39:56 server kernel[0]: AppleYukon2 - bad packet received. length: 1440, packet status bits: MII error
May 15 18:39:56 server kernel[0]: AppleYukon2: 00000000,00000001 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
May 15 18:49:54 server kernel[0]: serialnumberd 194 FSWRITEDATA SBF /dev/dtracehelper 13 (seatbelt)
May 15 18:49:54 server kernel[0]: serialnumberd 194 FSREADDATA SBF /dev/autofs_nowait 13 (seatbelt)
May 15 18:49:54 server kernel[0]: serialnumberd 194 FSREADDATA SBF /usr/sbin 13 (seatbelt)
May 15 18:55:12 server kernel[0]: AppleYukon2 - bad packet received. length: 23, packet status bits: MII error
Any ideas?

Yes, it's been running Server since I purchased it.
I doubt the serial number is in use elsewhere: I purchased the 10-user version at a retail store in a sealed package and I've only installed it once.

Mac Mini won't boot up.

Mac Mini won't boot up! Just getting blank white screen, any ideas why? No apple, just a blank screen. It worked fine last night.

Have you tried booting into the Recovery HD by pressing/holding COMMAND+R at system start or the Option/Alt key and choosing Recovery HD to boot into?
If you can get into the Recovery HD, open Disk Utilities and Verify Disk. Repair if necessary.

Mac Mini won't start and constantly makes disc ejecting noise

My Mac Mini won't start. It was working fine, then just locked up and won't start again. When I push the start button it just makes this repeated disc ejecting noise from the DVD drive. It doesn't make the chime noise or display anything on the monitor. I've disconnected the optical drive, but it didn't help. Then it just doesn't start at all. I thought that if I would disconnect the optical drive, that it would ignore it and just boot off the hard drive, but nothing happened. The power light comes on. Then, if I hold down the power button for 10 seconds it shuts down. The fan operates. It just never attempts to boot up. I can't put in a system DVD because the optical drive is just in eternal eject mode.
If you have any suggestions let me know. Thanks.

I have the same situation.
I think the drive thinks it has a disc to eject or part of the mechanism is stuck and can't return to it's resting position. I was going to disconnect as you tried but now I think I'll try to disassemble the drive to see if there might be some debris jamming things up.
Please let me know if you solve the problem.

2010 Mac Mini won't sleep

Hello, everything was working fine until I accessed my mac mini from my old iMac G4 to share some files. Now my new Mac Mini won't sleep. Here is what I have done. Ejected the Mac Mini on the iMac. Turned off the iMac, stopped sharing everything on the Mac Mini including files, my printer and iTunes media and reset the PRAM. Still the Mac Mini won't sleep. It's set to it's defaults of 10 minutes to sleep the monitor and itself but only the monitor goes to sleep after the 10 minutes. Very frustrated...

Hello Euchre and thank you for replying. I have unchecked all the boxes within the "Sharing" options that I checked some time ago. When I did that, sharing was automatically turned off. Still I am having the issue. I'll try putting the monitor at 9 minutes and the computer at 10 to see if that works. I'll be back. Thanks again, Ed

2010 Mac mini Superdrive not burning DVD's

My mac mini is not burning DVD's right. I put in a 500GB harddrive a few months back and the SATA cables are attached correct. I can read DVD's but writing DVD's doesn't work. The process finishes but when after I eject the disc I can see that nothing is burning in the inner most part of the disc. When I put the disc back in the computer thinks the disc hasn't been burned and asks if it shuld be open in finder like a blank disc. I know a cd/dvd should burn from the center and spiral outward as it writes more data but it seems the disc is offset when it writes its first data, leaving the inner most part of the disc blank. Maybe I should reformat the OS and start from scratch to see if that helps. Any other ideas?

Strange these Memorex DVD's worked flawlessly a couple of times then I started getting these srange burns. I think I'm going to blitz this install I'm backing up with time machine now so I'll see what happens. Is there anyway to reapply an EFI update to make sure nothing is corrupt? I did notice what looked like brownish black burns on the logicboard when I opened it up to put the new harddrive in. They were on the long solder traces where they test the logic board by the the logic boards sata connections. I keep the system on 24/7 but don't really play any 3d or do anything that is too processor intense. Another thing is the superdriver seems to favor the left side when a DVD is initially inserted and ejected but moves to the conter when pressed all the way in I can't remember that being normal.

My mac mini is not burning CD's.

My mac mini is not burning CD's. It can read CD's but writing CD's doesn't work, but burning DVD's works fine.
If I burn from iDVD it works fine but if I create a Burn Folder and drag Pictures from iPhoto to that folder it goes threw the process of burning but it spits out a Black CD. Any Ideas?
Blue skies!
Jerry

Welcome to Apple Support Communities
What OS X version have you got? Press Option key and check if you can select OS X

Mac mini won't connect to my wireless router!

I just bought my mac mini server then connected it to wifi, then after 2 weeks I had to go abroad for a week so I just turned off the switch connecting to my mac, without switching off my mac mini server. then when I get back home my mac mini won't connect to my wifi. I tried everything from manually setting up IP and DHCP nothing works. What happened?
thanks for help,
Jakarta

I didn't reset the machine/router itself because 2 of my computer is still connected to wifi-and working perfectly, but the mac mini server cannot connect to wifi.
what I did was to set up the "networking utilities"-having said that, what I did was to connect all over again to wifi, this did not work. I did tried to change from DHCP to manually set up IP, neither of these didn't work.
I'm now stucked!
Message was edited by: asea

Mac Mini won't start after installing OS X 10.6.3

My Mac Mini won't start after installing Mac OS X Snow Leopard 10.6.3. When I turn it on, the Apple logo appears and the initialization line starts to fill, but it suddenly stops. It does that again and stops at the same point, but this time it shuts down. What should I do?

If you are coming from 10.5.8, hopefully you backed up your important data first. Your mini will need at minimum, 1 GB of RAM to install Snow Leopard and at least 5 GB of storage remaining on your boot drive.
I treat 10.6.3 as a fresh, full install over a 10.5.8 system. That means I choose Disk Utility from the Installer's menu and repartition the boot drive as a single partition, Mac OS X Extended (Journaled) format, and use the GUID partition scheme from the options button. At this point, while still in Disk Utility, I would verify the drive under First Aid.
Then I turn the installer loose, and reboot into a working 10.6.3 system, ready for the software updates that take the machine to 10.6.8.
So, following the above guidelines, reinstall 10.6.3.

My Mac mini won't recognize photo library in itunes so I can download pics from library and free up space in memory, I was able to download camera role but not photo library that takes up more space.

My Mac mini won't recognize iphone 4 photo library in itunes so I can download pics from library and free up space in memory, I was able to download camera role but not photo library that takes up more space. Help thanks

The photo sync is one-way: Computer to phone. Photos synced to your phone will have to be extracted from your phone using third-party software, if you want them on your computer, as Apple makes no provision to do so. Since you're using a Mac, you can use this:
http://www.ecamm.com/mac/phoneview/

Mac Mini won't boot after failed XP installation

Recently upgrade HD to 320GB 7200 rpm and 3GB ram. Running 10.5.8 fine.
I tried to install Windows XP through Boot Camp, but wasn't successful, I terminated the installation. Then Mac Mini won't boot up. When powered on, you heard the chime, then grey screen showed and stayed. Tried starting with "C" (boot from CD), "OPT" (boot option), "T" (target), and reset PRAM. None of them worked.
What should I try next?
Thanks
Message was edited by: Yijian Cao

If you install XP on Bootcamp, your startup disc will be changed to XP Windows partitioned you did. To restore your startup disc back to Mac OS, make sure your Mac is turned off. 1. Plug the power back and press the power button ON. When you hear the power On sound, press and hold the ALT key on your keyboard until you see the hardrives. 2. Select the HD that says MAc OS, then your mac will boot back to Mac OS.
Let me know if you have more problems, maybe I can help.
Abel

My Mac Mini won't get past the initial startup screen with the Apple logo. What can I do?

After a long distance move, my Mac Mini won't startup past the logo screen. What can I do?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
     a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, boot from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

TS3824 2011 mac mini won't go past white screen with apple logo

My Mac mini won't move past a white screen with apple logo in the center. What should I do?

Hi ..
If you have v10.7 Lion installed, use Lion Recovery to repair the startup disk if necessary, or reinstall the Mac OS X.
If you are running a prior Mac OS X, boot from your install disc, run Disk Utility. The startup disk may need repairing > Using Disk Utility to verify or repair disks
And try Resetting your Mac's PRAM and NVRAM

Mac mini won't start up. Grey screen with apple just freezes.

Mac mini won't start up. just get a grey screen with the apple and it freezes. Please help.

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there to Repair the Disk, then Repair Permissions.

My mac mini won't back up to my Seagate external drive but can read the information on it. Can i back up to it at all?

My mac mini won't back up to my Seagate external drive but can read the information on it.
Can i back up to it at all? and how do i do it?
Simon

I suspect the Seagate is not formatted to be used with the Mac. The correct format would be Mac OS Extended (Journaled), if you just bought the EHD then almost certainly it's formatted to be used with MS Windows machines. This is easy to fix, here are instructions on how to format it:
http://pondini.org/OSX/DU1.html
After formatting Time Machine http://support.apple.com/kb/ht1427 will launch and will begin backing up. The first backup will take some time however after the first backup it will go pretty quickly.
NOTE!!!!!!!!!!!!!!! After formatting all data will be erased, so please if you have data on that move it to the internal HD first and then format. Then once you have backed up you will have a backup copy of the data. Also NEVER EVER use a backup disk to be used to store data. The reason being is if that drive crashes you have not only lost the data you have lost it's backup!!!!!!!!!!!!!!!

Mac Mini Won´t Burn CD´s

Similar Messages

Maybe you are looking for