Mac Mini won't discover new Aluminum wireless keyboard

I have a new aluminum wireless keyboard that my mac mini running 10.5.8 will not discover (although new iMac 21.5 running 10.6.1 will). The Apple website says to use "Aluminum Keyboard Software Update 2.0" with the keyboard but I can't find that anywhere. I could find the "BluetoothFirmwareUpdate2.0.1" but it said my computer did not need that and wouldn't install it. Do I need that Aluminum Keyboard Software Update 2.0 and where can I find it (I looked all over the download site)? A link would be great!

I tried to locate that same software too. It is not yet available. I have the same issue probably. The bluetooth just does not recognise the keyboard. Although normal type pad is usable. Hot keys are a mess.. Any info would be very much appreciated.

Similar Messages

  • New Mac Mini won't recognize passcode for wireless keyboard

    Just unboxed my new Mac Mini and have started the install process.  Made it to the wireless mouse ok, then the keyboard.  It finds the keyboard, gives me the passcode, then I enter it and press enter as requested, and nothing happens.  It just spins through the process again and again.  I have installed new batteries, turned all things on and off at random, and turned off bluetooth on all other devices that might be interfering.  Any ideas?

    Take the batteries out of the keyboard
    Turn off the computer
    Put batteries back in keyboard and hit the power button on the side
    wait 5 seconds
    turn on mini
    go back through the setup process
    works every time for me

  • Mac mini won't connect to my wireless router!

    I just bought my mac mini server then connected it to wifi, then after 2 weeks I had to go abroad for a week so I just turned off the switch connecting to my mac, without switching off my mac mini server. then when I get back home my mac mini won't connect to my wifi. I tried everything from manually setting up IP and DHCP nothing works. What happened?
    thanks for help,
    Jakarta

    I didn't reset the machine/router itself because 2 of my computer is still connected to wifi-and working perfectly, but the mac mini server cannot connect to wifi.
    what I did was to set up the "networking utilities"-having said that, what I did was to connect all over again to wifi, this did not work. I did tried to change from DHCP to manually set up IP, neither of these didn't work.
    I'm now stucked!
    Message was edited by: asea

  • How do I pair my new Mac mini (mid 2011) and white Apple Wireless Keyboard (2003)?

    I just bought a new Mac mini (mid 2011) and can not set it up via my Apple Wireless Keyboard (2003). I'm disheartened but not surprised that my Bluetooth 4.0 Mac isn't backwards-compatible with my Bluetooth 1.0 keyboard. But I can't find any documentation confirming the fact that my non-paired, but tested & perfectly functioning keyboard will not work with current Macs.
    I was however, able to locate a tech support doc (http://support.apple.com/kb/HT4112) that mentions my Apple Wireless Keyboard (2003) is not compatible with iOS devices. (Which is not critical because iOS provides a non-physical keyboard. Aside, it would be lovely were Apple to add a non-physical keyboard to Mac OS X, if only so new desktop owners can continue to set up their Macs in a pinch.)

    I just bought a new mini mac (lion 2011) with a wireless keyboard.  I could not get the mac to recognise the keyboard.  Spent several hours back with the Genius team who replaced keyboard and mac but did not get anywhere.  They gave me a wired keyboard, was able to configure the mac and then it recognised the wireless keyboard.
    Seems this is a problem with the new mac/OS

  • My Mac Mini has a password and a wireless keyboard and mouse that have been working well with bluetooth until two days ago when my keyboard stopped responding. Since I have a password on Mac Mini, I am unable to access settings to pair Mac Mini. Thanks.

    Can anyone help me pair my BT keyboard with my password protected Mac Mini? I am currently unable to log in to Mac Mini since the BT keyboard has become unpaired.  The wireless mouse is working.  I also have an I Pad and an I Phone as well as Mac TV.
    Please help!!
    Thank you.
    Gail

    I had exactly the same issue, that the Apple wireless keyboard became unpaired, and I couldn't get past the password-protected log-in screen, because I didn't have a wired keyboard laying around.
    OK folks,
    Discovered by trial and error that it was the wireless mouse (not an Apple brand) that was preventing the keyboard from pairing, even though it's not a bluetooth mouse...
    Here's the steps I used...
    1. Disconnected the USB  mouse cord from the Mac Mini.
    2. Turned off the Apple wireless keyboard from switch on the back.
    3. Turn Mac Mini off, then back on.
    4. Waited for it to boot up as far as  the password-protected screen.
    5. Turned on the Apple wireless keyboard, waited for it to stop blinking, indicating (hoping) that it paired        up.
    6. And voila... was able to then type in the password...
    7. Then plugged the non-Apple wireless mouse sensor  cord back into the Mac Mini's USB port
    I also immediately went in to the MacMini's Sharing options and set that up for remote management in case something else happens down the road for other problems...
    Thanks though to all who suggested solutions... they may come in handy in the future.
    Hope this helps someone else...
    Lynda

  • Mac mini issue:lost connectivity with the wireless keyboard

    I lost connectivity with the wireless keyboard and I can't unlock the lock screen.What can i do?

    Sometimes powering the keyboard off by holding in the power button on the right end of the battery box and then after ten of so seconds powering up again will reestablish the connection. Other than that forcing a reboot using the power switch on the mini should  restore the connection unless thereis something else going on.
    If this is a recurring problem try replacing the batteries with fresh ones. If this keyboard has been paired with another bluetooth device such as an iPad or another Mac, unpair it from the other device.

  • Mac mini first start up trouble with wireless keyboard and magic mouse

    Do you need to use a USB keyboard and mouse for your first mac mini start up? I've just fired it up for the first time and got a strange start up screen. The icon looks like a battery compartment with a green switch with an arrow pointing up. I've read all of my manuals and can not find anything to help me. Any ideas??

    Yes you need to use a wired keyboard.

  • Mac mini won't boot anymore

    My Mac mini won't boot anymore. It's been running fine for months.
    It's running Leopard Server 10.5.2 Build 9C31
    It starts to boot, I get the first spinning gear with the gray screen, then the blue desktop blinks, then a second spinning gear on a gray screen and it appears to hang (the gear stops spinning).
    I booted off the install DVD, ran disk utility, repaired the HD, repaired the permissions: the behavior is the same.
    Safe mode doesn't work (same hang as above).
    Single user mode does work.
    I can connect to it via Server Admin while it appears hung.
    The last few lines of the system log are:
    May 15 18:38:58 server emond[67]: SetUpLogs: uid = 0 gid = 0
    May 15 18:38:58 server emond[67]: SetUpLogs: opening /Library/Logs/EventMonitor/EventMonitor.error.log
    May 15 18:38:59 server kextd[23]: writing kernel link data to /var/run/mach.sym
    May 15 18:39:09 server KernelEventAgent[59]: tid 00000000 received unknown event (12)
    May 15 18:39:20 server kernel[0]: display: Not usable
    May 15 18:39:20 server com.apple.KerberosAutoConfig[126]: Kerberos configuration is up to date
    May 15 18:39:20 server com.apple.ATSServer[125]: FODBCheck: New annex file created
    May 15 18:39:21 server ARDAgent [130]: ******ARDAgent Launched******
    May 15 18:39:21 server com.apple.KerberosAutoConfig[132]: Kerberos configuration is up to date
    May 15 18:39:22 server ARDAgent [130]: call logout from LoginLogoutProxyCallBackFunction
    May 15 18:39:22 server com.apple.launchd[1] (com.apple.RemoteDesktop.agent): Throttling respawn: Will start in 9 seconds
    May 15 18:39:24 server loginwindow[58]: Login Window Started Security Agent
    May 15 18:39:29 server servermgrd[53]: servermgr_calendar: created default calendar virtual host
    May 15 18:39:31 server ARDAgent [146]: ******ARDAgent Launched******
    May 15 18:39:32 server ARDAgent [146]: ******ARDAgent Ready******
    May 15 18:39:33 server mdworker[109]: (Error) SyncInfo: Boot-cache avoidance timed out!
    May 15 18:39:54 server Python[47]: CGImageSourceCreateWithData data parameter is nil
    May 15 18:39:54 server com.apple.wikid[47]: Thu May 15 18:39:54 server.jeff.carpenter.name Python[47] <Error>: CGImageSourceCreateWithData data parameter is nil\n
    May 15 18:39:56 server kernel[0]: AppleYukon2 - bad packet received. length: 1440, packet status bits: MII error
    May 15 18:39:56 server kernel[0]: AppleYukon2: 00000000,00000001 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
    May 15 18:49:54 server kernel[0]: serialnumberd 194 FSWRITEDATA SBF /dev/dtracehelper 13 (seatbelt)
    May 15 18:49:54 server kernel[0]: serialnumberd 194 FSREADDATA SBF /dev/autofs_nowait 13 (seatbelt)
    May 15 18:49:54 server kernel[0]: serialnumberd 194 FSREADDATA SBF /usr/sbin 13 (seatbelt)
    May 15 18:55:12 server kernel[0]: AppleYukon2 - bad packet received. length: 23, packet status bits: MII error
    Any ideas?

    Yes, it's been running Server since I purchased it.
    I doubt the serial number is in use elsewhere: I purchased the 10-user version at a retail store in a sealed package and I've only installed it once.

  • 2010 Mac Mini won't sleep

    Hello, everything was working fine until I accessed my mac mini from my old iMac G4 to share some files. Now my new Mac Mini won't sleep. Here is what I have done. Ejected the Mac Mini on the iMac. Turned off the iMac, stopped sharing everything on the Mac Mini including files, my printer and iTunes media and reset the PRAM. Still the Mac Mini won't sleep. It's set to it's defaults of 10 minutes to sleep the monitor and itself but only the monitor goes to sleep after the 10 minutes. Very frustrated...

    Hello Euchre and thank you for replying. I have unchecked all the boxes within the "Sharing" options that I checked some time ago. When I did that, sharing was automatically turned off. Still I am having the issue. I'll try putting the monitor at 9 minutes and the computer at 10 to see if that works. I'll be back. Thanks again, Ed

  • My Mac Mini won't get past the initial startup screen with the Apple logo. What can I do?

    After a long distance move, my Mac Mini won't startup past the logo screen. What can I do?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
         a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, boot from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.   
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • Is there any way to connect my Apple wireless/bluetooth trackpad and keyboard to my Mac Mini without using a wired or usb keyboard?

    Is there any way to connect my Apple wireless/bluetooth trackpad and keyboard to my Mac Mini without using a wired or usb keyboard?

    Well, I read that already, but I am trying to start up my Mac mini(new purchase) and I cannot get to all the system preferences etc since I cannot get past the startup screens. The site also mentioned waiting to turn on the keyboard until a language was requested. Neither language screen worked. I feel as though I'm just about ready to throw in the towel.

  • My Mac Mini won't start. The Power light blinks continusly (not pulses)

    My New Mac Mini won't start up. I bought it online from J&R a week ago. My monitor says "no input detected" and the power light blinks. I recently fed it the gray mac os x install disk one, which it won't give back. Holding the mouse button when it turns on doesn't have any effect. So now i can't put a disk in or start it up.

    Welcome to the Apple discussions.
    No video with the power light blinking once per second means either bad or no memory. See this Apple note: http://docs.info.apple.com/article.html?artnum=303083 . Specifically, below is from that note:
    If the computer detects no SDRAM (Synchronous Dynamic Random Access Memory, also referred to as RAM) or the RAM installed does not meet the appropriate specifications, the screen will remain black but the power LED on the front of the computer will blink once per second to signal the error. This error condition may be due to physically damaged RAM, installing the incorrect type of RAM, or not having RAM installed.
    Has it ever worked since you got it? If not, you should call J&R and tell them they sent a dead on arrival system, and ask for a replacement (ask them to send a will call tag or prepaid label to send the non-working machine back).

  • Mac Mini won't boot up.

    Mac Mini won't boot up! Just getting blank white screen, any ideas why? No apple, just a blank screen. It worked fine last night.

    Have you tried booting into the Recovery HD by pressing/holding COMMAND+R at system start or the Option/Alt key and choosing Recovery HD to boot into?
    If you can get into the Recovery HD, open Disk Utilities and Verify Disk. Repair if necessary.

  • Mac mini won't boot at all

    I am currently using my mac mini (core solo) as a media center. I cam home from a long weekend to find it completely frozen, so i powered it off, and i have not been able to get it to boot since.
    The regular startup screen appears, but it permanently hangs with the grey screen with the apple logo, and no spinning wheel.
    I have attempted to boot from my Leopard disk with no success. I cannot boot into single-user mode. I cannot boot into safe mode. The only thing I can do is boot into target disk mode, which I have done in order to retrieve some files. I have also applied the 10.5.4 combo updater via target disk mode with no change in my problem.
    When I boot in verbose mode, I can see some messages which may or may not be out of the ordinary, one example of which is:
    +Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style+
    It has the same exact message for com.apple.driver.ApplePCIConfigurator and com.apple.driver.Apple.IntelCPUPowerManagement. I don't know if these are normal or not.
    The last 3 lines where it stops booting are:
    +rooting via boot-uuid from /chosen: 7FB33E59-0964-31AC-8244-283A02217CBA2+
    +Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>+
    +FireWire (OHCI) Lucent ID 5811 built-in now active, GUID 0016cbfffe59e93c; max speed s400+
    Any ideas? At this point I'm ready to just format and re-install, but how can I proceed if I can't get it to boot to the Leopard disk?

    LE Studios,
    I also had a boot-up problem similar to yours, but possibly for different underlying reasons (RAM related, I think). Anyway, what sometimes happens is that your directory might be corrupted preventing the unit from accessing the boot-up files that it needs. You might try running Disk Warrior, a utility that is used by the genius bar at Apple Stores. It comes on a disk that you would use as the start-up disk.
    Start up the unit and insert the Disk Warrior DIsk and hold down the "C" key. The software can take a while to load (3-4 minutes). When it's finished loading you should see the Mac Mini hard drive available for the program's routines. Choose the directory fix. If successful, you should be able to re-boot the Mac Mini normally once the new directory is written to the disk.
    This may not solve the original problem as to why the unit froze in the first place, but it should allow you to boot the computer.
    You may also want to run the Apple Hardware Test that is on the installation disk that came with the computer.

  • Mac Mini won't start and constantly makes disc ejecting noise

    My Mac Mini won't start. It was working fine, then just locked up and won't start again. When I push the start button it just makes this repeated disc ejecting noise from the DVD drive. It doesn't make the chime noise or display anything on the monitor. I've disconnected the optical drive, but it didn't help. Then it just doesn't start at all. I thought that if I would disconnect the optical drive, that it would ignore it and just boot off the hard drive, but nothing happened. The power light comes on. Then, if I hold down the power button for 10 seconds it shuts down. The fan operates. It just never attempts to boot up. I can't put in a system DVD because the optical drive is just in eternal eject mode.
    If you have any suggestions let me know. Thanks.

    I have the same situation.
    I think the drive thinks it has a disc to eject or part of the mechanism is stuck and can't return to it's resting position. I was going to disconnect as you tried but now I think I'll try to disassemble the drive to see if there might be some debris jamming things up.
    Please let me know if you solve the problem.

Maybe you are looking for