Mac Mini won't get past the apple startup screen

Hi,
Just returned from the long weekend and tried to boot up my mac mini. It seems it doesn't want to get past the apple startup screen and the icon on the bottom just keeps spinning.
Any ideas?
Thanks

can you boot into _*safe mode*_ ?
( *click on image to enlarge* )
JGG

Similar Messages

My Mac Mini won't get past the initial startup screen with the Apple logo. What can I do?

After a long distance move, my Mac Mini won't startup past the logo screen. What can I do?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
     a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, boot from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My Macbook won't get past the start up screen

Hey everyone
I have a Macbook that's about 3 years old. I did an software update yesterday and since doing it the computer won't get past the start up screen. There's just the Apple logo and the rolling ball thing. It's been stuck there for around 30mins and nothing changes. I'm not really sure what has happened but I was wondering if there is any way I can fix it.
Thanks for your time.
Bevan

Hey Lyssa
I don't have a back up but I'm not to worried about that as it's my traveling computer and I only use it for the web and some word processing.
I don't have the disks with me right now as I'm away from home. I'm not sure what I had updated, I think there was a lot because I hadn't don't it in a long time.
If I can start it in safe mode what should I do?
Thanks.
Bevan

I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My Apple password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

Hey Dpcupcake,
If you can not get past the sign in screen on your iPad, you will need to use the steps in this article to recover use of your iPad -
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

Upgraded my iphone 4S to 8.0.2 and it won't go past the Hello startup screen or accept my Apple ID Sign in!!! Help!!! What do I do to fix this??

Upgraded my iphone 4S to 8.0.2 and it won't go past the Hello startup screen or accept my Apple ID Sign in!!! It just restarts itself!!!
Help!!! What do I do to fix this??

I doubt that your data have been lost, the hard drive should be fine. Too bad that you're going to sell it, you could have used the hard drive in an enclosure to back up your new computer to. Please remember to make frequent backups/clones, I use SuperDuper! and it works perfectly. I have used it to re-clone a drive from the external when things have gone bad, you can also boot from a SuperDuper! clone.
Anyway, let us know how things go, I'm pretty sure your drive will be fine.

Turning on and the apple chime is heard but won't get past the first grey screen

Turning on the Mac and hearing the chime but not able to get past the initial grey screen.

Hello Daryl,
Also let us know what Operating System you have on your Mac.

My mac won''t go past the gray startup screen

I was using my ibook g4 (1.33GHz) yesterday to rip a dvd, safari was also running. the computer froze and black writing appeared on the screen at the left hand side. It said something about 'kernel', but as i don't speak computer language i just held the power button to turn off the computer, hoping it would be fine once i restarted.
I waited about a minute then i restarted but it wont go past the gray startup screen with the gray apple logo and the spinning progress wheel. I have tried to restart in safe mode and have also reset the PMU(power management unit) but still the same. I can't figure out what to do, and i really need to access files stored on my HD urgently. please if anybody can help me i''d really apprecite it,
thanks.
iBook G4 Mac OS X (10.4.9)

Hi,
This article may help. What happened was a kernel panic. They can be caused by either hardware or software. Try the syeps outlined in the article and post back the results.
John

Curve 8900 won't get past the T-Mobile screen on start-up

I am hoping that someone out there can help. My T-Mobile BlackBerry Curve 8900 does not make it past the T-Mobile screen on start-up. The battery was fully charged when this happened. Personally, I think it has to do with iHeart Radio crashing, but I could be wrong. I have tried to plug the USB cord into a rear port on my laptop and launch the Blackberry Desktop Manager to see if I could do anything, but nothing happens. The BB Desktop Manager does not connect to the phone, because it is not getting past the T-Mobile screen on start-up. Not sure what to try.

Hey VTX1300R,
Do you have a recent backup of you device? If so the you may want to try to do a reset to factory on the device. Have a look at this article to see how to do it. http://bit.ly/98bCNO
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

MacBook Pro won't get past the apple screen on startup

The laptop won't startup. I get to the Apple logo and a spinning gear. I've tried starting it 3 times with the same result.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

MacBook won't boot past the apple logo screen!

So my MacBook started freezing up and I went to restart it and it wouldn't boot past the grey logo screen with the spinning gear. Its pretty old and therefor still has the Leopard operating system. I've been trying to run Disk Repair using a Snow Leopard install disc but it just gets about 30% done and then doesn't go any further. Eventually I stopped the disk repair and just tried installing OSX but when it asks me what drive I want to install on there are no options available to click. I've got alot of unsaved work on this old thing and would love to get it running soon! Any help would be extremely appreciated! Thanks

I've been trying to run Disk Repair using a Snow Leopard install disc
Install discs are "machine specific" .. you can only use the install disc that came with the Mac for repairing the hard disk.
You may not have enough free space on the startup disk.
Follow the directions for starting up in Safe Mode
A Safe Mode boot can take a little longer then a normal boot so be patient.
When you see the Desktop, right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
If there isn't enough free space, help here > Freeing space on your Mac OS X startup disk
You can use Disk Utility to verify the startup disk from Safe Mode but you can't repair the disk. You will need the install disc that came with your MacBook for that. While you have Disk Utillity open check S.M.A.R.T. status at the bottom of the window. Make sure it says: Verified
When you are finished, click the Apple menu icon top left in the screen. From the drop down menu click Restart.
If you don't have the original install discs you may be able to request a replacement. You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.

My MacBook won't go past the gray startup screen.

I shut down my MacBook pro during a software update because the update appeared to have frozen. When I tried to reboot my computer afterwards, it would go to the gray startup screen with the spinning gear and not progress any further. I have tried multiple times to restart it, each time getting the same result, I have also tried starting it up holding down shift, another time holding down control option p r, and also holding shift. Each time gave me the same result of freezing at the gray screen. Any idea on what I can do to resolve this problem?

Hi,
This article may help. What happened was a kernel panic. They can be caused by either hardware or software. Try the syeps outlined in the article and post back the results.
John

IMac won't get past the Apple page when turned on...

I just bought a new iMac about a month ago. It is the 21.5" basic system. Of course the first thing that I did with it was update the software and have set it to update automatically, so everything should be golden there... Today when I walked by and turned it on it came on like normal, but that was it. The white screen with the Apple in the middle came on and then the loading icon popped up underneath it. It has been loading since... After about an hour and a half, I shut it off by holding the power button in, unplugged the modem, unplugged the iMac then plugged only the iMac back up. Turned on the power again. It powered up but did the same thing. Is something loading, updates maybe? If so it is something different than any of the other updates it has uploaded so far. THis is a new one on me.
I might add that this is my first Mac. I went with it because I get tired of rebooting my PC each year (I actually just did my PC again...bummer). Now if the iMac has already crashed, I am severely dissapointed in Mac. I have not downloaded anything that I shouldn't have, or anything that was even suspicious. In fact the only real things I have downloaded are Firefox and some of the add ons and a trial version of PS.
Can anyone help me, tell me it is normal and it will be ok?

It sounds like the update may have bee interrupted somehow and became corrupted, possible a power spike at your house. However I wouldn't get too upset. You have 90 days of free telephone support so now is a good time to use it. The number is in your owners manual.
You can also try doing a SMC and PRAM resets, this is probably what Apple will have you do to begin with so you can be pro-active and try them and if they don't fix the problem you can just let the tech know. The instructions for doing each reset are:
_SMC RESET_
• Shut down the computer.
• Unplug the computer's power cord and all peripherals.
• Press and hold the power button for 5 seconds.
• Release the power button.
• Attach the computers power cable.
• Press the power button to turn on the computer.
_PRAM RESET_
• Shut down the computer.
• Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
• Turn on the computer.
• Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
• Hold the keys down until the computer restarts and you hear the startup sound for the second time.
• Release the keys.
Also this is a good time to plug AppleCare. AppleCare will extend your warranty and phone support to 3 years from the date of purchase. If you don't already have it I'd recommend it, Apple charges $169 however you can pick it up from Amazon for less. You can only get it while the machine is covered by it's one year warranty. Let it go 366 days and you're out of luck.
Roger

Iphone 5 won't get past the apple logo

Hi,
My phone died last night and i put it on charge, the apple logo appeared but nothing more. I tried to reboot the phone numerous times by clicking the home and power button together, ive tried leaving it over night on charge, and ive also tried to plug it into my mac and restore it. This morning i tried the same methods of which none worked however at one point it clicked into the welcome page to swipe across and then entre my wifi details, i added those and continued to click the back up from itunes option, it backed up and restored and completed, however the apple logo appeared again and didnt boot into my home screen so im left with the apple logo still on my screen and no further.
Any help would be massively appreciated!
Thanks

http://support.apple.com/kb/ht1808

A1226 won't get past the grey loading screen

I just purchased a macbook pro model A1226 from a friend who said it wont load up OSX. I figured it was just a hard drive replacement and wouldnt be a big deal, but I swapped the hard drive out for another and it still wont load. I went to put his back in. He said it had Lion on it, but when I held the option key down to go to the recovery drive, the regular startup drive says leopard.... so, not sure what i'm working with. I've tried to look on here and find different options to use at startup. I have my old snow leopard family pack install disks, but everytime I try to boot to the disk it trys to then gives me a "you need to restart your mac" prompt. I've tried resetting the pram , I've tried to get to this ever so elusive apple hardware test by pressing d prior to startup etc. and i'm at a loss. Please help. Thanks.
-Chase

Boot holding down the OPT key. That will start the boot manager and you can see what your options are.
Edit: sorry, missed the part where you'd already tried that.

Mac book won't go past the start up screen.

So my mac book pro will not go past the loading screen where you see the apple symbol and the rotating gear thing. is there anything i can do to fix this or restart my OS?

http://support.apple.com/kb/TS2570 For the part that it says to startup by your disc and run disk utility, if you're running 10.7 or 10.8 you'll actually bootup holding down Command and R on startup. Hope this helps

Mac Mini won't get past the apple startup screen

Similar Messages

Maybe you are looking for