Mac Mini won't go to sleep using the "Apple" - Sleep command

I bought a new Mac Mini at the beginning of January. In the past few weeks we've had occasional trouble putting the computer to sleep using the "sleep" command from the Apple pull-down menu. Sometimes it takes several tries. Last night I finally selected shut down, then canceled the shut down, tried sleep again and it took. The computer seems to have no trouble going to sleep on its own when it's been idle for set time to sleep. And it has no trouble staying asleep until properly woken up. We have a USB 2.0 hub with a printer and a multi-function machine connected, as well as another printer.

My newer Mini takes about 30 seconds to go to sleep. Could it be yours just needs more time?
When mine was brand new, sleep kicked in almost immediately. I have no idea why this has changed.

Similar Messages

Why will my iMac Intel Lion no longer go to "sleep" using the Apple drop down menu?

How can I get my iMac (Intel / Lion 10.7.4) to go to "sleep" using the Apple drop down menu. I have never had a problem until recently.

Some process is running that is preventing sleep mode,
Zap the PRAM and see if that changes things.

TS3824 2011 mac mini won't go past white screen with apple logo

My Mac mini won't move past a white screen with apple logo in the center. What should I do?

Hi ..
If you have v10.7 Lion installed, use Lion Recovery to repair the startup disk if necessary, or reinstall the Mac OS X.
If you are running a prior Mac OS X, boot from your install disc, run Disk Utility. The startup disk may need repairing > Using Disk Utility to verify or repair disks
And try Resetting your Mac's PRAM and NVRAM

Mac Mini won't connect to internet using Apple products (Safari, iTunes, AppStore). Date and time are frozen to the moment CPU is booted up. Firefox works. Cannot update.

For the past few days my Mac Mini has been having issues.
Safari won't connect to internet, but Firefox does.
Time and date are frozen. Only resets when copmuter is re-booted.
Unable to update via App Store and iTunes won't connect either.
Please advise.

Hi again,
Let me ask for some better help for you that is familiar with this problem (if in fact it is a similar problem with the IP address and your ISP.
The other topic concerning this can be found at:
http://discussions.apple.com/thread.jspa?threadID=2725608
It is a somewhat lengthy thread but may just apply to your situation.
Anyways I will see if I can call on some better help for you. Hang in there. Best to arm yourself with enough info before contacting Comcast so they might know what you are dealing with fully.
littleshouders
edit: I have posted for some extra help for you that may have a better idea of what's going on if it is your ISP and their modem and how it handles the IP address causing Safari and iTunes not to connect. Hang in there it may take awhile but I'm sure someone will pop in to help.
Message was edited by: littleshoulders

With intel (2009) mac mini networked to macbook, can i use the mini to watch movie downloads on mh hdmi tv, with right cables of course

I have an Intel Mac mini. Main computer is Macbook on ethernet cable. Can I, with the right cables, use the mini to watch downloaded movies on my HDMI tv?

Use your MacBook Pro because it has FireWire. Use Target Disk Mode on your Mac mini so that the Mac mini will display on the MacBook Pro like a external HDD. You'll need a FireWire 400 cable. You can get one for around $10 if you don't have one. And I recommend getting that sooner than later because you can use that for many things if your computer has issues. Anyway, to put your Mac mini is target disk mode, connect the two computers with the wire. Turn on the Mac mini with the "T" key down after your MacBook Pro has started and ready. You'll see the FireWire logo on your Mac mini. And on your MacBook Pro, you'll see the Mac mini's HDD as an external HDD. Do whatever you need. When you finish, drag the Mac mini drive to the trash to eject it. Few seconds later, turn off your Mac mini to complete the whole process.

I just bought the new 2014 Mac Mini 2.6 8Gig for $699 at the Apple Store Online. I want to use it for light editing in iMovie making video's for YouTube, I couldn't afford the higher priced models. Is this going to work for me? I hope so..

Will this do basic video editing for YouTube Video's in iMovie, I hope so. It's all I could afford.
Just under $800 with tax and Applecare.
It's stock 2.6 8gigs 1 terabyte hard drive.
I have two monitors DVI that I plan to hook to it.
I know it's weak but will it get me going without too much hardship.
I want to grow into the more high priced computers and Final Cut Pro later on.
I know I will need a bigger computer then.
Thanks

There are many people using the basic (i5) 2012 MacMini and even older ones to edit complex films in FCP X so you should have no problems.
I have been using FCP 7 and FCP X since they came out on my 2008 iMac Core 2 Duo and am thinking of getting the same model as you rather than pay the astronomic price for a new 27" iMac.
The performance won't be quite as fast but it will be at least 4 times faster at rendering than my old iMac.

I need to do a reset on my new mac mini so I can return this to the apple store

I need to wipe my personal files off this new mac mini before I return to the apple store. a factory reset

Click here and follow the instructions.
(115451)

My iPad mini won't allow me to use the split keyboard, how do I fix this?

Hi can any body help me? I can't get the split keyboard to work on my iPad mini.

You can take a look at this video to see how it's done: http://www.youtube.com/watch?v=tCIOGo5658I

2010 Mac Mini won't sleep

Hello, everything was working fine until I accessed my mac mini from my old iMac G4 to share some files. Now my new Mac Mini won't sleep. Here is what I have done. Ejected the Mac Mini on the iMac. Turned off the iMac, stopped sharing everything on the Mac Mini including files, my printer and iTunes media and reset the PRAM. Still the Mac Mini won't sleep. It's set to it's defaults of 10 minutes to sleep the monitor and itself but only the monitor goes to sleep after the 10 minutes. Very frustrated...

Hello Euchre and thank you for replying. I have unchecked all the boxes within the "Sharing" options that I checked some time ago. When I did that, sharing was automatically turned off. Still I am having the issue. I'll try putting the monitor at 9 minutes and the computer at 10 to see if that works. I'll be back. Thanks again, Ed

Mac Mini shows blue or pink tint using DVI to VGA adaptor on 800x600 HDTV

My new Mac Mini won't retain the color settings for this TV/Monitor that is connected via the DVI to VGA adaptor. I've tried to find the display using the Mac utility. I finally got the Mac to create a color profile for the TV by plugging a USB cable from the TV to the Mac, while the VGA cable was also connected. The Mac displayed a new color profile called RCA/ProScan (the TV brand), and the colors looked acceptable. I then saved that color profile. The monitor would then revert to a very blue tint, or a very pink tint without notice. I thought it might have been when I disconnected the USB cable, or when I re-booted the Mac Mini, but I can't detect a cause & effect pattern. I might try to connect the TV using a DVI to S-Video adaptor instead of VGA, but I don't know if it will help. Can someone help? Thanks.

Make sure it isn't a simple cabling problem. Check all the connections and tighten down the thumb screws. The mini is prone to a poor video connection and you need to make sure the video cables are tightly attached.

Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini

Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini (late2014)
im currently useing my Mac mini as a portable computer, I take it to the university and use the iMacs there as a monitor but before I can do that I have to log in to my Mac mini first which means doing it blind
is there a way to put the IMacs into display mode with out logging into my Mac mini first
or is there a portable monitor that I can use that will not require me to login first

This
Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
says:
How do I enable TDM?
Make sure both computers are turned on and awake.
Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
How do I exit TDM?
To leave TDM, press Command-F2 on the keyboard of the iMac that is in TDM. You can also exit TDM if you shutdown or sleep either computer or detach the cable.
Can I use a third-party keyboard or older Apple keyboard to enable TDM?
Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and

Mac Mini Won't Boot with VGA Monitor Connected

I have a new Mac Mini connected to an older VGA monitor using the Apple brand VGA adapter. The mini is fully up to date and runs perfectly when booted. However, if I reboot the mini with the VGA monitor connected, it fails to boot. I just hear the faint chime sound every other second. There is no output to the monitor and the only way I can get it to boot is to disconnect the monitor and then power cycle the mini. I can reconnect the monitor just seconds after powering back on and it finishes booting properly.
Anyone else experience this? It is very frustrating. I've also tested with an HDMI connected monitor (without the VGA adapter) and it boots just fine and the display works properly.
Thanks!

Okay, I'm back with good news: I have found two remedies for the problem which will hopefully solve it for you as well.
Given that the issue only occurs when certain monitors are connected, I concluded that the root of it must be a bug in the Mac's firmware related to DDC (Display Data Channel) handling, and that the most promising way to address it should be to just disable the DDC.
Workaround #1: If your monitor has BNC connectors, use a VGA to BNC cable.
In this configuration the DDC pins are not connected to the monitor at all. This did indeed fix the problem - my Mac mini booted without a problem with the monitor connected. However, I was not completely satisfied with this solution, because VGA to BNC cables are usually quite heavy and inflexible, and do no go together well with Apple's MDP to VGA adapter and the Mini Displayport/Thunderbolt port which has no locking mechanism.
Workaround #2: Remove pin 12 of the VGA plug.
Pin 12 of the VGA plug connects the serial data line of the DDC. Pulling out this pin with a pair of needle nose pliers will effectively disable DDC. I hesitated to do this to my cable (a direct MDP to VGA cable which eliminates the need for a separate adapter dangling from the Mac) and therefore bought a tiny VGA male to female adapter (also called port saver, e.g. Delock 65250) to perform the surgery on that. This has done the trick and my Mac mini has started up fine ever since.
Of course, without DDC the Mac won't know the model name and capabilities of the attached monitor and thus offer some resolution and frequency settings which the monitor may not support, but that's a small drawback compared to having to pull out the monitor cable everytime you turn on or restart your Mac.

Mac mini won't boot anymore

My Mac mini won't boot anymore. It's been running fine for months.
It's running Leopard Server 10.5.2 Build 9C31
It starts to boot, I get the first spinning gear with the gray screen, then the blue desktop blinks, then a second spinning gear on a gray screen and it appears to hang (the gear stops spinning).
I booted off the install DVD, ran disk utility, repaired the HD, repaired the permissions: the behavior is the same.
Safe mode doesn't work (same hang as above).
Single user mode does work.
I can connect to it via Server Admin while it appears hung.
The last few lines of the system log are:
May 15 18:38:58 server emond[67]: SetUpLogs: uid = 0 gid = 0
May 15 18:38:58 server emond[67]: SetUpLogs: opening /Library/Logs/EventMonitor/EventMonitor.error.log
May 15 18:38:59 server kextd[23]: writing kernel link data to /var/run/mach.sym
May 15 18:39:09 server KernelEventAgent[59]: tid 00000000 received unknown event (12)
May 15 18:39:20 server kernel[0]: display: Not usable
May 15 18:39:20 server com.apple.KerberosAutoConfig[126]: Kerberos configuration is up to date
May 15 18:39:20 server com.apple.ATSServer[125]: FODBCheck: New annex file created
May 15 18:39:21 server ARDAgent [130]: ******ARDAgent Launched******
May 15 18:39:21 server com.apple.KerberosAutoConfig[132]: Kerberos configuration is up to date
May 15 18:39:22 server ARDAgent [130]: call logout from LoginLogoutProxyCallBackFunction
May 15 18:39:22 server com.apple.launchd[1] (com.apple.RemoteDesktop.agent): Throttling respawn: Will start in 9 seconds
May 15 18:39:24 server loginwindow[58]: Login Window Started Security Agent
May 15 18:39:29 server servermgrd[53]: servermgr_calendar: created default calendar virtual host
May 15 18:39:31 server ARDAgent [146]: ******ARDAgent Launched******
May 15 18:39:32 server ARDAgent [146]: ******ARDAgent Ready******
May 15 18:39:33 server mdworker[109]: (Error) SyncInfo: Boot-cache avoidance timed out!
May 15 18:39:54 server Python[47]: CGImageSourceCreateWithData data parameter is nil
May 15 18:39:54 server com.apple.wikid[47]: Thu May 15 18:39:54 server.jeff.carpenter.name Python[47] <Error>: CGImageSourceCreateWithData data parameter is nil\n
May 15 18:39:56 server kernel[0]: AppleYukon2 - bad packet received. length: 1440, packet status bits: MII error
May 15 18:39:56 server kernel[0]: AppleYukon2: 00000000,00000001 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
May 15 18:49:54 server kernel[0]: serialnumberd 194 FSWRITEDATA SBF /dev/dtracehelper 13 (seatbelt)
May 15 18:49:54 server kernel[0]: serialnumberd 194 FSREADDATA SBF /dev/autofs_nowait 13 (seatbelt)
May 15 18:49:54 server kernel[0]: serialnumberd 194 FSREADDATA SBF /usr/sbin 13 (seatbelt)
May 15 18:55:12 server kernel[0]: AppleYukon2 - bad packet received. length: 23, packet status bits: MII error
Any ideas?

Yes, it's been running Server since I purchased it.
I doubt the serial number is in use elsewhere: I purchased the 10-user version at a retail store in a sealed package and I've only installed it once.

2014 Mac Mini won't detect Dell monitor on startup

On a cold start or waking from sleep it is necessary to reset the PRAM in order for the Mini to recognize a Dell P2014H. Restarts are not a problem.
This was not an issue with an older MacBook Pro or an Air at the Genius Bar. I have resolved this by setting preferences to never turn the display off but don't consider this a permanent fix.
I'm running 10.10.1 and connected via VGA to a Thunderbolt port. The monitor is only 7 months old so I'm not inclined to replace it yet or add even more cables to my collection just to find that doesn't fix anything. In fact when another 2014 Mini was connected to my monitor at the Apple store it had the same problem.
On the other hand our 2012 Mini has never had issues with a Dell U2412M. So what's up Apple?

I just bought a Mac Mini with latest operating system 10.10.1 and had the same problem. I also used a monitor with HDMI cable. I spent 45 minutes on the phone with Apple Care tech but no solutions. I took it back to shop and they tested it but did not have a HDMI cable and used a thunderbolt adapter. It worked fine. Bought a Thunderbolt adapter for HDMI cable and problem solved. Both mouse and keyboard now wake up system. Perhaps a future update will solve this but for now I'm happy.
Cam

Mac Mini won't start after installing OS X 10.6.3

My Mac Mini won't start after installing Mac OS X Snow Leopard 10.6.3. When I turn it on, the Apple logo appears and the initialization line starts to fill, but it suddenly stops. It does that again and stops at the same point, but this time it shuts down. What should I do?

If you are coming from 10.5.8, hopefully you backed up your important data first. Your mini will need at minimum, 1 GB of RAM to install Snow Leopard and at least 5 GB of storage remaining on your boot drive.
I treat 10.6.3 as a fresh, full install over a 10.5.8 system. That means I choose Disk Utility from the Installer's menu and repartition the boot drive as a single partition, Mac OS X Extended (Journaled) format, and use the GUID partition scheme from the options button. At this point, while still in Disk Utility, I would verify the drive under First Aid.
Then I turn the installer loose, and reboot into a working 10.6.3 system, ready for the software updates that take the machine to 10.6.8.
So, following the above guidelines, reinstall 10.6.3.

Mac Mini won't go to sleep using the "Apple" - Sleep command

Similar Messages

Maybe you are looking for