Mac mini won't upgrade from osx 10.7.5 to Mavericks
I have a Mac Mini (mid2010) 2,4GHz Core2 duo 4Gb RAM with OSX 10.7.5 and when I try to download Mavericks through App Store I always get: "...unable to verify your computer.."
NOT a matter of Apple ID (works fine elsewhere), according to Apple support (OS X Mavericks: requisiti di sistema) it should download fine 'n easy but so it isn't.
Have tried a thousand times now, always the same. Anyone any clue?
thanks
it is, I am positive that it is. I'm running OS X 10.7.5 when it says now Yosemite needs
Compatibility: OS X 10.6.8 or later
Similar Messages
-
I've encountered 4HDD/11/40000000 SATA(0,0). AFTER SOME RESEARCH IN APPLE COMMUNITY, I LEARNT THAT IT'S A HARDWARE ISSUE. SO I WILL BE TAKING MY MACBOOK PRO TO NEAREST APPLE STORE. MY QUE IS, WILL IT BE FIXED IF I UPGRADE FROM OSX 10.8.5 TO MAVERICKS? What other options do I have? What can be an approximate cost for fixing this problem?
Of course not. It's a hardware problem, so it can't be fixed by upgrading software. The only option you have got is to take the MacBook to an Apple Store or reseller.
That error indicates a problem with the hard drive. What you have to do is to make a backup of your files and take the MacBook to an Apple Store or reseller, so they can confirm that the problem is the hard drive and not the SATA connector, which could be worse.
If it's a hard drive issue, it's not expensive (about $100-200, depending on the hard drive). If it's a SATA connector issue, the whole logic board may have to be replaced.
Note that you can replace the hard drive yourself if you want, but the cost between doing it yourself and taking the MacBook to an Apple Store or reseller is similar -
I just picked up a used Mac Mini and the previous owner didn't wipe the hard drive. He did include the original install disks in the package, though. I inserted the install disk & it says that OS X Tiger can't be installed on the mini (currently it is running Snow Leopard 10.6.8). I tried to boot from DVD but if I hold down the c key, nothing happens and it boots to the HD like normal. If I hold down the option key, the only boot option shown is the HD. I don't get any request for a password, so this mini doesn't appear to have a firmware password set. The DVD drive appears to be functioning fine since it can read the DVD - I just can't boot from it. If I use the Startup disk utility the only option shown once again is the HD. I even tried upgrading to Mavericks, but get an error message that it can't be installed on this mini (I checked the requirements and this machine meets them - running 10.6.8, at least 2 Gig ram, 1.83 GHz Core 2 duo, 60 Gigs free space on the drive.......
I want to do a clean install but am at a loss on how to do so. Any suggestions?I inserted the install disk & it says that OS X Tiger can't be installed on the mini (currently it is running Snow Leopard 10.6.8).
You can't install an older version of OS X on top of a newer version. You would have to erase the disk first.
I tried to boot from DVD but if I hold down the c key, nothing happens and it boots to the HD like normal.
Make sure you're using disk# 1 of 2 of the two gray disk set., and that you hold the C key down for enough time, the boot process from the DVD is much slower than from a hard drive. However, since you have Snow Leopard installed now, there is no point in trying to install Tiger, unless he didn't give you his Admin password; you wouldn't be able to add yourself as a new user or delete his user name without knowing the admin password.
If you did get Tiger installed, then you would have to buy a copy of Snow Leopard on DVD.
I checked the requirements and this machine meets them - running 10.6.8, at least 2 Gig ram, 1.83 GHz Core 2 duo, 60 Gigs free space on the drive.......
Those aren't the complete requirements. It has to be an Early 2009 MacMini, Model Identifier number 3.1, to be compatible with Mavericks. Click on the Apple Menu's, "About This Mac," More Information, then System Report, to locate that information. -
Mac mini wanting to upgrade from 10.5.8 to anything newer for safari to work properly
I have a problem. certain sites are not working because my safari will not support the changes they have made to the website. ei. cannot see anything i want to or update my profiles. I have a mac mini with 10.5.8. and need to upgrade to newer for things to work. these are my specs for my 2009 mac mini...
Model Name: Mac mini
Model Identifier: Macmini2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 1.83 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 2 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MM21.009A.B00
SMC Version (system): 1.19f2
Serial Number (system): YM7503MPYL1
Hardware UUID: 00000000-0000-1000-8000-0016CBAD8BAD
I dont know what else i need to get it to work. and my mother is having the same problems with hers because her os for her mac mini is a 10.4.4. so i need to get hers upgraded as well for her work. she will have less power as my mac as her mini is older. will it still work or will i need to find her a new computer?Choose About this Mac from the Apple menu and check the processor.
A PowerPC Mac mini can’t be upgraded past 10.5.8.
For a Core Duo Mac, click here, install the DVD, and run Software Update.
For your Mac mini, upgrade it as if it was a Core Duo Mac, and once done, if desired, go to the online Apple Store and order a download code for Lion 10.7.
Mac OS X 10.7 and newer don't support PowerPC software such as Microsoft Office 2004. If you upgrade the OS, back up the computer first.
(122228) -
Older mac mini won't reboot from Install DVD?
I've passed on my 2006 era mac mini to my daughter. We can't seem to get to a factory settings because it won't reboot from the install DVD. It keeps cycling through to the normal reboot.
Could be damaged disks.
BestBuy sells disk repair kits.
But for about the same price as disk repair kit, you could call 1-800-676-2775 and give them the unit serial number and pay shipping/handling fee for replacement.
Assuming it is bad disks. -
Mac mini won't wake from network
Hi, I am confused and need some help.
SInce upgrading to 10.7.2 my mac mini no longer wakes for network access i.e. from ATV2. Worked perfectly before and now it does not.
Also, the screen shows (about once a week) snow on the screen from a wake from sleep. only a reboot solves this.
Any thoughts?My Mac Mini server (2011) with 10.7.2 has the same problem since 10.7.2 update.
-
First gen. Mac Mini - won't boot from DVD/CD, or into any safe modes
Hi All!
Last Sunday my Mini seemed to start hanging up, then all of a sudden it was spinning beach ball time. Everything pointed to a hard drive issue, including Disk Warrior, which couldn't replace the directory due to some kind of disk issue (I've forgotten). Was able to get into safe boot mode, tried fsck -y:
+disk 0s3: I/O error+
+Invalid Key length (4,25910)+
+**volume check failed+
+/dev/rdisk 0s3 (hfs) exited with signal 8+
Soon after that I couldn't even get into safe boot mode. Yesterday we replaced the hard drive, but now I can't even boot from the Leopard install disk, or even eject it so I can try booting from the Panther install disk. It's as if it's no longer recognizing the keyboard. I can't boot from the CD/DVD by holding down the "C" key, nor can I boot using the shift key. All paths lead to the flashing question mark/mac face folder...
What else can I try? Could this be a power supply issue?
There is nothing else hooked up to it at present, other than the keyboard and the monitor.
I do have a LaCie mini back-up drive with Panther installed available, if that's any use.
TIA
RoseJust for the records:
the Apple A1243 aluminium USB keyboard is not available at start up time (in connection with Mini 1,1 OS X 10.6.4, 1GB, late 2006)
I did not get the start screen to login, system hung with frozen wheel - so I was glad to have Boece's advice to use the IR remote for changing to the OS X DVD for startup (remember, no key worked on the keyboard). Nevertheless, Disk First Aid from the DVD have shown no problems with either disk nor allowances - but I have not been able to start from the the mini's disk.
Then tried the usual hints from Apple's documentation - to no avail.
After that I tried to restore from my actual TM backup, which used up some time (it's working rather slow, isn't it?), but then I got hung at the BSD's screen asking me to shut off an restart - another loop.
I guess that the iTunes update (9.2.1) is the culprit, as the last Safari update (5.0.1) is working OK.
At last, I made an erase & install - which worked (I am no in the duty of installing all updates again) so far. Let's see ... -
How can I upgrade from OSX 10.7 to 10.9 on my 2012 mac mini? (2.3 GHz, 4 GB, 500 GB SATA disk) I don't want OSX Yosemite.
If your Mini shipped with OS X 10.7 Lion, then it was considered a 2011 build model, or before.
The Mini 2012 model, is considered a Late 2012, & the last one where RAM could be upgraded.
And it shipped with Mountain Lion 10.8, which is a fairly OK system if one had older software.
(However mine shipped in Dec 2014, with Mavericks 10.9.0, and was built in January 2014.)
There were a few different build versions of Late 2012 Mac Mini, the i5 or i7 processor,
in dual-core or quad-core, and some CTO or built-to-order versions with other specs.
You can buy Mountain Lion from online Apple Store, & use a download code emailed to you to
get the Mt. Lion 10.8 from Apple Servers; this would be about it, since Mavericks isn't available.
So hopefully that is an option you can exercise; in addition the computer may prefer more RAM.
Good luck & happy computing! -
Mac mini won't wake properly since osx mavericks
Since I downloaded OSX mavericks, my Mac Mini doesn't wake from sleep. I can see notifications top right of screen and the mouse pointer, so the screen is on and working. Only way to get it going is to hold down the power button to power off and then resatrt. Not very convenient!
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Upgrading from OSX 10.4.9 to OSX 10.6.8 on old Mac Book Pro (2nd computer)
Greetings
I was wondering what the steps and cautions are to upgrade from OSX 10.4.11 on an old Mac Book Pro (2nd computer for shared use in household for emails, etc.) 2.33 Inel Core 2 Duo to OSX 10.6.8 or highest that I can?You will need to get a 10.6 Snow Leopard retail disk which I don't think are still available from Apple.
Google "buy mac 10.6 snow leopard" to get an idea of current pricing. You'll need updates to10.6.8 in order to upgrade to 10.7 (the early core duo MBPros can not do this) or possibly 10.8 but check the exclusion list to be sure.
MacTracker can give you all the details. http://mactracker.ca/ -
My Mac mini won't recognize iphone 4 photo library in itunes so I can download pics from library and free up space in memory, I was able to download camera role but not photo library that takes up more space. Help thanks
The photo sync is one-way: Computer to phone. Photos synced to your phone will have to be extracted from your phone using third-party software, if you want them on your computer, as Apple makes no provision to do so. Since you're using a Mac, you can use this:
http://www.ecamm.com/mac/phoneview/ -
On my iMac I upgraded from OSX 10.6 to OSX 10.6.8. Now Photoshop Elements won't connect to my scanne
On my iMac I upgraded from OSX 10.6 to OSX 10.6.8. Now Photoshop Elements 6 will not communicate with my scanner HP Photosmart 209a. I need an HP import module. How do I get one?
You may probably look for it on HP's site. - http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&product=3777182
Thanks
Andaleeb -
How do I upgrade from OSX 10.7.5 to OSX 10.8.5
I need to upgrade from OSX 10.7.5 to OSX 10.8.5 in order to use Avid Pro Tools 10 and 11 on the same iMac.
My iMac is 2.5GHz Core i5. Pro Tools 10 will not work on OSX 10.9 and Pro Tools 11 needs 10.8.5 or 10.9.4. Not certified for Yosemite.Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later.
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model
Identifier 5,1 or later.
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later.
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later.
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later.
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later.
7. Xserve (Early 2009) - Model Identifier 3,1 or later.
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps. -
How do I upgrade from OSX 10.7.2 toOSX 10.9?
How do I upgrade from OSX 10.7 to OSX 10.9?
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mavericks
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps. -
Mac Mini won't boot after failed XP installation
Recently upgrade HD to 320GB 7200 rpm and 3GB ram. Running 10.5.8 fine.
I tried to install Windows XP through Boot Camp, but wasn't successful, I terminated the installation. Then Mac Mini won't boot up. When powered on, you heard the chime, then grey screen showed and stayed. Tried starting with "C" (boot from CD), "OPT" (boot option), "T" (target), and reset PRAM. None of them worked.
What should I try next?
Thanks
Message was edited by: Yijian CaoIf you install XP on Bootcamp, your startup disc will be changed to XP Windows partitioned you did. To restore your startup disc back to Mac OS, make sure your Mac is turned off. 1. Plug the power back and press the power button ON. When you hear the power On sound, press and hold the ALT key on your keyboard until you see the hardrives. 2. Select the HD that says MAc OS, then your mac will boot back to Mac OS.
Let me know if you have more problems, maybe I can help.
Abel
Maybe you are looking for
-
Windows 7 and iTunes 9 - problem connecting to Airtunes to stream music
I have a new laptop with Windows 7 and iTunes 9. iTunes recognizes my Airport Express (AE green light lit, and shows up in lower right of iTunes when choosing which speakers to play), but I cannot connect - just hangs on "Connecting to User's Wireles
-
How to find out the Non Partitioned Tables used 2Gb on oracle
Hi team how to find out the Non Partitioned Tables used > 2Gb on oracle where not is sys & system regards
-
I'm sick of this bull crap. My PC is still under warranty. You have all my info so send me a box and you'll get this hunk of **bleep** back! I'll never buy another HP. Your support sucks. Even if you get someone you can't understand a frigging word t
-
How can I see the size of my music library in iTunes?
How can I tell the size of my music library in iTunes?
-
Hi, We are on SRM 5.0 and intend to use contract management functionality.Please let us know if : 1)we can create local contracts in Classic and Extended classic scenarios 2) Can we create GOA in both the scenarios 3) Can we distribute GOA to ECC sys