Mac Mini wont eject a disc

My Mac Mini has taken a DVD and wont play or eject it. I have used the Keyboard Eject button, F12, the Eject button on my Mac Mini's dvd program and I dragged the Disc icon to the trash. Nothing has made this disc eject from my Mac Mini. When I tried to restart my Mac Mini while holding the mouse button down the computer Froze and now will freeze when ever I try to Shut it down. Anyone ever had this problem or know how to get it out? It is a standard CD.
Thanks In Advance!

After looking into it I found the answer. Unplug everything while the Mini is off. Plug the power cord in wait 15 sec. then plug in the key board. push the power button then hold the mouse button down. this worked for me.

Similar Messages

  • Mac mini wont read disc drive

    Just got an audio interface for garage band however mac mini wont read the disc drive to load software. It has worked in the past. Tryed an audio cd and its not reading that either.

    Apple Computers: Troubleshooting the slot-loading SuperDrive
    Could be bad drive.

  • Remote Disc Can't recognize Blank disc, but it does recognize other discs. I am trying to burn something from my itunes on my mac mini to a blank disc on my windows computer. What could be wrong?

    Remote Disc Can't recognize Blank disc, but it does recognize other discs. I am trying to burn something from my itunes on my mac mini to a blank disc on my windows computer. What could be wrong?
    I can see other discs such as music and stuff so I know I have installed it correctly but how come I can't see the blank disc that I need to burn?

    You can't burn discs remotely, you can only read data discs remotely (i.e. you cannot play movie DVDs either).
    Either copy the files to the remote computer or get an external drive.

  • ITunes crashed now Mac mini wont power back on

    iTunes crashed now Mac mini wont power back on

    You have not provided any information on which to base troubleshooting. Minimal information would include the Model Mac mini you have for example Mid 2010 Mac mini, exactly what happened when iTunes crashed, and what -- if anything -- happens when you try to restart. It is unlikely iTunes has anything to do with the failure to reboot but instead iTunes crashed because of what even caused your Man mini to fail.
    Just as a starting point, be sure and check all your connections, power, monitor, keyboard, mouse, everything. You would not be the first to have a plug come adrift unexpectedly.

  • My mac mini wont boot from disk

    My 2010 Unibody Mac Mini wont boot from disk, i need to open disk utility to repair my drive but it wont boot, any ideas?

    it started yesterday, and nope, not changed anything apart from the apple update for S.L. a week or two ago, and its stuck at the spinning gear, this has never happened before

  • Apple Remote and Mac mini wont pair

    My remote works fine with Mac mini and Plex and Sofa Control. But I am unable to pair them. The settings are right and when I press Menu + Fwd nothing happens, no Pairing icon on the screen.
    The situation is a frustration since I have an Apple TV besides connected to a second Apple Remote. Since my Mac mini wont pair, the Apple TV remote controls them both.
    Does anyone had a similar problem and found a sollution?

    Does it pair if the ATV remote is disabled?

  • My late 2012 mac mini wont let me connect to my internet, it says connection timeout occured, help?

    Hi, my late 2012 mac mini wont let me connect to my network after installking a kext file which was meant for lion, i was trying to improve my connection but clearly failed, can anyone help me connect again, or show me how to uninstall this file as i think this maybe the problem?

    This may help:
    http://www.insanelymac.com/forum/topic/35625-how-to-delete-kext-file-using-termi nal/

  • My mac mini wont turn on but there is power to it as the usb port charges my iPad

    My mac mini wont turn on but there is power to it as the usb port charges my iPad. My monitor uses a HDMI cable when the mac mini is off it says no input received which it does not say so it is receiving some signal from the mac mini. I have tried a different cable and a different monitor/ hdmi cable. The fan isnt running there is no start up noise but the little light on the front blinks every 4-5 seconds. Im booked in to see a GENIUS on sunday but I was wondering if there is anything I can do in the mean time. The mac mini is only 8 months old if that. Any ideas people? Oh the mac is also running mountain lion and has been since the day of release i've never had a problem up until this.

    The following table lists the new tones and their meaning:
    Tone(s)          Description
    1 tone, a 5-second pause, repeat          No RAM installed
    3 successive tones, a 5-second pause, 3 successive tones          RAM does not pass data integrity check
    1 long tone when holding down the power button          Firmware upgrade in process. See About firmware updates for Intel-based Macs for more details.
    3 long tones, 3 short tones, 3 long tones          Firmware restoration from CD in process. See About the Firmware Restoration CD (Intel-based Macs) for more details.
    http://support.apple.com/kb/HT2538
    Can you count the beeps or flashes?
    1 beep = no RAM installed
    2 beeps = incompatible RAM types
    3 beeps = no good banks
    4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
    5 beeps = processor is not usable
    In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.
    Note: In this case, a flash is considered to be 1/4 second or 250 ms or greater in length.
    http://support.apple.com/kb/HT1547

  • HT1338 why wont my mac mini read snow leopard disc, it will read other dvd's and cd's

    I have a mac mini since 2009 I recently got the snow leopard from apple but when I insert it it in the drive it just makes a few noises then ejects the disc. I have tried other dvd's and cd's and it reads them ok any help appreciated

    It's possible the DVD is damaged, scratched and/or dirty.  Check out KB Articles:  http://docs.info.apple.com/article.html?artnum=50448  How to Handle and Clean CD and DVD Discs and Troubleshooting Mac OS X installation from CD or DVD
    Or you can request another DVD from Apple and/or get your $$$ back.
    Your drive may need cleaning.  Cleaning kits can be purchased from any store that sells CD/DVDs.

  • Intel mac mini wont boot after system restore

    Hi,
    I ran the system restore on my intel mac mini using the genuine leopard cd that came with it.
    Now it wont boot. When you press power the light comes on but it does not chime and there is not video output to any monitor.
    Anyone know what could be wrong?

    Welcome to Apple Discussions!
    You picked 10.4.1 in your profile.
    Intel Mac Minis at minimum came with 10.4.4.
    If it came with a 10.5 genuine DVD, it most certainly was not running 10.4.1 or 10.4.4. Perhaps you mistook one Mac Mini install DVD for another? Does your Mac Mini have 4 USB ports on back? What does the 10.5 installer disc you used look like?

  • Help my Mac mini wont work with the airpot

    I have got the Mac mini Intel Core Solo G5 model and ive got a ibook G4 my G4 works great and fine but my mac mini does not. I connect to the base station fine useing the drop down bit on the taskbar in finder and enter the password and it connects. But when i do network assistant and it asks for me to eneter the password again it just basicly frezzes for a min then says invalid password when i know that it is the write base station password. It did work once but froze again and said could not connect. and when i go into the airport utlity it can't descover the base station even though it says it is connected with a full signal, im doing the excatly same things i did with my ibook but it just wont work. Please can someone help me and tell me what i have to do or give me some support this is my last hope as apple aren't intrested. I will be very gratful!

    The software update was for Intel based Mac computers and does not specify Core Duo or Core 2 Duo:
    AirPort Extreme Update 2007-001
    This update is recommended for all Intel-based Macintosh computers and provides compatibility with AirPort Extreme base stations and networks.
    This is the update that generated a fix at www.macfixit.com because some folks have been having issues with connection with their internet provider and some people have had issue with their airport systems just shutting down.
    It was part of an auto update that was received. One of my Macs is a MacBook Pro Core Duo (not Core 2 Duo) and this upgrade (download) was part of the update check that is automatically performed.

  • Mac Mini Server RAID 1 Disc Problem

    I tried configuring my new Mac Mini Server (with the help of my MacBook Pro's superdrive) in RAID 1 as outlined in previous discussions by:
    Step 1: Start the Mini in Target Mode. Press the T during start. In a few seconds the firewire logo will appear on your screen.
    Step 2: Go to your second Mac. Connect the firewire cable between second Mac and Mini.
    Step 3: On the second Mac start the disc utility. The two identical drives on your mini will show. Create a new Raid set (mirrored = Raid 1). Include both drives. Confirm the warning that all data on the mini will be lost.
    Step 4: Make sure your second Mac has CD/ DVD sharing option installed. This is to use the superdrive to install OS X Server on the mini.
    Step 5: Shutdown both Macs
    Step 6: Start your second Mac in target mode. Make sure the firewire cable is still connected.
    Step 7: Start the Mini with the option key pressed.
    Step 8: Insert the OS X Server install disc in your second Mac.
    Step 9: wait till the drive logo apears om the Mini. Continue the install. Will take about an hour.
    But when I get to Step 9 the mini's drive logo does not appear. I tried reformatting the mini's drives again in Disc Utility but still the same outcome. What did I do wrong? How can I fix it?
    Thanks!!

    Never mind, was able to do the install with the Remote Install Mac OS X utility.

  • HT1752 how do i reset administrators password on mac mini g4 without a disc

    i need to change my administrators password on my mac mini g4 with 10.4.11. i bought it used and don t know it neither does the guy that i bought it from. he didnt have the disc either so im trying to find a way that i can can do it without it. please write if you know thank you

    From the Apple menu choose System Preferences.
    From the View menu choose Users & Groups.
    Click the lock button if it appears locked; enter the administrator password.
    Select the name of the user whose password you want to change.
    Click the Reset Password button or the Change Password button.
    Enter a new password in both the New Password and Verify fields, and add a Password Hint if desired.
    Click the Reset Password button or the Change Password button.
    If its a login that is a different action.

  • My mac mini won't read discs.

    My macmini has stopped reading any discs.
    They go in but just make a whirring noise. It tales a while to eject the disc. I have tried cleaning it with a DVD cleaning disc but it would not read either!!!!!

    Apple Computers: Troubleshooting the slot-loading SuperDrive
    Mine does the same thing on my 2009 Mini and I have not got it to work.I consider it just failed/. That happens not infrequently

  • Mac Mini constantly ejecting

    Hi
    Brand new mac mini, was fine for first couple of days but now it is constantly ejecting CD/DVD.
    The screen keeps showing the eject symbol every minute or so which is annoying alone.
    If I try and watch a DVD it's impossible because it gets ejected within 30 secs.
    Advice please.

    I would first check in the system profiler (Applications>Utilities>System Profiler) to see whether the system recognizes the optical drive is present. If not, then the drive has a fault - perhaps disconnected or damaged. If it does appear in the profiler, then it may be that the drive has a disk already stuck in it, which would cause the symptoms you describe. Alternatively, it may be that the drive is faulty and needs replacement.
    When you boot the system, hold down the (left) mouse button to try and force-eject a disk if it is stuck in the drive. This doesn't always work however. As an additional check, open Disk Utility (also in Applications>Utilities) and see if anything is listed under the optical drive. If so, click it and click 'eject'. If not, then I'm afraid the most probable next step is disassembly, with a view to physically checking the optical drive, and likely replacement of it.
    If the system is still under warranty, rather than attempt the work yourself, return it to Apple or an Apple Approved Service Provider for them to deal with it.

Maybe you are looking for

  • What's the effective lifetime of a 4G iPod?

    Who will be my Apple Wan Kenobi? I have a 4G (20gig) Pod and have used it daily for the 2 years we've owned it. I'm hooked and waiting for my PC to die so I can justify buying a Mac Mini. I've had to reset it exactly twice in 23 months...until this p

  • Arch Linux compatibility

    I have just come to know about arch linux and its lightweight/low-power features. I am working on a project where power consumption is a major issue. I have been using UBUNTU and now I am looking for a better low-power distro. I want to know if Arch

  • Error 4280 - burning failed?

    Hi, I bought a new PC last week, running on Vista now - unfortunately... Every time I try to burn a CD, a message pops up telling me that an unknown error occured - error 4280 (it's unknown but it has got a number??) I've installed itunes again, chec

  • What do i need to do about a server ??, what do i need to do about a server ??

    i  cannot facetime due to a server error

  • Problem with AS3LIB Sample program

    I have successfully compiled and generated swf file for StringEcho example under Windows but I cannot seem to get the AS3Lib sample to compile properly.  I tried to execute the makefile but it failed where .SUFFIXES and .c.o were not recognized as co