Mac mouse is too sensitive. Anyone know how to relax it?

Mac wireless mouse is too sensitive and jumps around ahead of me. Anyone know how to slow it down?

I had the same problem, with a new iMac: I was getting a lot of random scrolling, in the middle of editing work, and it was very annoying.
Contacted Apple and they told me to do an SMC (?) reset, which changed nothing.
I then realized that the problem was from an over-sensitive Magic Mouse. Many users seem to complain about this over-sensitivity, especially for newer computers.
So, a while ago, I took the following advice the website at the end of this post.
Control the touch-sensitive area of this mouse with the free app MagicPrefs (not clear why Apple does not provide something this useful):
download it from http://magicprefs.com/ and install
then go to its Preferences
in the new window that opens, click on Configure Scrolling, at the bottom right
you will then see the sensitive area of your mouse
click and drag to reduce that area
I had found that especially touching the edges of the mouse start the random scrolling
so, I made the touch-sensitive area for scrolling very small, and in the top-middle of the mouse, about where the scroll-wheel would be on a normal mouse.
Hope this saves you all a lot of frustration.
P.S. I learned about MagicPrefs from one of these frustrated people
http://blog.digitaltavern.com/mac-my...es-a-bad-combo

Similar Messages

Keep getting a mail pop up "enter password for account "SBC." ATT says I need to update my Mac mail server program. Anyone know how I can do this?

I keep getting an annoying pop up for mail "Enter password for account "SBC." I enter my password but it still pops up. But I can still get my mail when I click on "Get mail." I called ATT and they said they are aware of the problem with Mac users and that I have to update my Mac Mail server program. Anyone know how I can do this? They want to charge me.

RE: "Mail, Contacts and Calendars preferences can't connect to the Yahoo account "bellsouth.net".
I recently changed my ATT U-Verse password…and Mail quit working… it wouldn't send or receive, Safari worked fine. I tried to send an email and a warning message popped up, "Mail, Contacts and Calendars preferences can't connect to the Yahoo account "bellsouth.net". In smaller type the next sentence read, "Enter the password for user [email protected]". The Password box was highlighted in blue so I just typed in my new password and my email message was immediately sent…but… I still couldn't receive messages AND the above "can't connect" warning message kept popping up on the screen at random.
Here's the Fix that worked for me. (The problem is that the new password was changed/updated on the keychains "smpt.att.yahoo.com" name-but- the name "pop.att.yahoo.com" didn't update to my new password).
Go to your Utility windows and select Keychain Access. Under Category select Passwords. Now check your password for your current (newest dated) name, "smpt.att.yahoo.com". Now check the password under, "pop.att.yahoo.com". Mine wasn't the same as my newest password found in my
"smpt.att.yahoo.com" window so I deleted my old password in the "pop.att.yahoo.com" window and typed in my new password, then selected "Save Changes". MY MAIL NOW WORKED…and no more warning messages cropped up. Problem was fixed.

I use a two button mouse with my Mac Book Pro. It works fine, but after installing Lion, the mouse wheel goes in reverse of what it did (rolling the wheel towards your palm goes up not down the page). Anyone know how to fix this?

I use a two button mouse with my Mac Book Pro. It works fine, but after installing Lion, the mouse wheel goes in reverse of what it did (rolling the wheel towards your palm goes up not down the page). Anyone know how to fix this?

First sentence in OPs question:
I use a two button mouse with my Mac Book Pro
I guess the track pad settings would look similar to my screen shot?
Regards,
Colin R.

I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?

I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?

I am talking about the Ver 3 download link that came with the purchase email.
That link is no longer available. Use "Migration Assistant" to copy your Applications from your old mac to the new Mac, then immediately run software update. Aperture Version 3.2 will not run on your new mac with Mavericks, you will have to Upgrade to version 3.4.5 at least - you can download this update from the Support page: Aperture 3.4.5
Then launch Aperture and enter your registration key and try now too update from version 3.4.5 to 3.5 from the AppStore. The AppStore will change your Aperture registration to an AppStore version, so you will able to reinstall by downloading from the AppSTore in future.
If you want transfer only Aperture and no other applications, do it manually: You will have to copy not only the application but folders from the libraries as well:
/Applications/Aperture.app
/Library/Application Support/Aperture/
~/Library/Application Support/Aperture/
Leonie

The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

My first post to the Apple Support Community so it looks like all I wanted to know is covered in the title. The research I have done led me to solutions that I am not comfortable trying for fear of irreparably damaging my keyboard and/or Mac mini. Does anyone have a simpler solution? Please? Hellooooo?
Just in case the title is too long to show, I have re-pasted here:
The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

BDAqua wrote:
Hello & welcome to the Forums!
I think Spark cured this for another person and the same problem...
http://www.shadowlab.org/Software/spark.php
http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele
http://doublecommand.sourceforge.net/
Thank you for the response. Unfortunately, I could not figure out how to work the above applications. I thought that i had managed to assign the appropriate function keys in Spark to their volume counterparts, but it had no effect. Below is a screen shot. Do you see anything amiss?

When my desktop (Mac Power 5) starts a folder comes up with 2 heads which changes to a question mark. Does anyone know how to fix this.?

My Husband turned his desktop off without shutting down now When my desktop (Mac Power G5) starts up a folder comes up with 2 heads which changes to a question mark. Does anyone know how to fix this.?

Step 1- Try booting to Startup Manager by holding Option/Alt key.
Select the boot source and click the right arrow.
Once booted, open System Preferences and select the desired boot volume.
Replacing the PRAM battery is likely wise if the machine keeps forgetting it's boot source.
If that doesn't work,
Step 2- Boot holding a mouse click, insert the OS X install disc and hold C to boot to the install disc.
Once booted, open Disk Utility and "Repair Disk" on the boot drive.
Once done, reboot normally.
More:
http://support.apple.com/kb/TS1440

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help.

DOES ANYONE KNOW HOW TO GET PASSED MY PASSWORD LOGIN on a mac pro? I FORGOT IT. (yosemite 10.10.1)

DOES ANYONE KNOW HOW TO GET PASSED MY PASSWORD LOGIN on a mac pro? I FORGOT IT. (yosemite 10.10.1)

User Tip: Reset the user password in OS X Lion, Mountain Lion, Mavericks and Yosemite
Posting in CAPS LOCK Is often seen as screaming and is not appreciated. It's also very hard to read.

Does anyone know how to export photos on MacBook Pro to iPad without using iTunes? The iPad is synched to another Mac and I don't want to synch the iPad to my Mac but just transfer photos

Does anyone know how to transfer photos from a MacBook Pro to an iPad3 without using iTunes?
The iPad is synched to another Mac and I don't want to change the synch relationship of the iPad but want to transfer some photos.

https://www.dropbox.com
being a Mac newbie try to google to do research.

I get this error message when I try to back up my laptop: Time machine could not complete the backup. The backup disc image "/Volumes/Data/Lou Ann Buesing's Mac Book Pro. sparse bundle is already in use. Anyone know how to fix it?

I get this error message when I try to back up my laptop:
' Time machine could not complete the backup. The backup disc image "/Volumes/Data/Lou Ann Buesing's Mac Book Pro. sparse bundle' is already in use. "
Anyone know how to fix it?

Reboot the TC.. Sometimes you need to reboot the whole network.
This is what comes of Lion and then made worse in Mountain Lion of Apple not spending enough time to fix the bugs.
Read C12 in pondini.
http://pondini.org/TM/Troubleshooting.html
C17 can be related I think.

I authorized my home sharing on my itunes for mac to share to my itunes on windows PC, but for some reason my music isn't fully sharing/syncing. Does anyone know how I can solve this problem?

I authorized my home sharing on my itunes for mac to share to my itunes on windows PC, but for some reason my music isn't fully sharing/syncing. Does anyone know how I can solve this problem?

Hi, Dave.
If you're using the BlackBerry browser, you can't configure anything to bypass the RIM servers. I believe you may do so by using the Opera browser, but I haven't tried it myself so cannot comment with authority.
I hope that clears up the issue for you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

ICloud will not sync my contacts or calendar in Mac Office 2011. ICloud does however sync to my PC at work running Microsoft office 2010 and also to my IPad and IPhone. Does anyone know how to fix this?

ICloud will not sync my contacts or calendar in Mac Office 2011. ICloud does however sync to my PC at work running Microsoft office 2010 and also to my IPad and IPhone. Does anyone know how to fix this?

Welcome to the Apple community.
Unfortunately Office for Mac does not support the correct protocols to work with iCloud.

I am semi-retiring my old mac mini and want to use it as a hard drive for my macbook pro. Does anyone know how to do this?

I am semi-retiring my old mac mini and want to use it as a hard drive for my macbook pro. Does anyone know how to do this?

1. Remove the drives, install them in external enclosures.
2. Use a Firewire cable to connect to your computer. Boot the mini into Target Disk Mode - Transferring files between two computers using FireWire

Does anyone know how to change the copy on a pdf made in Indesign? I don't have that software on my Mac

Does anyone know how to change the text on a pdf made in Indesign when my Mac doesn't have that software? Thanks,

If you don't have access to Acrobat Pro or Nitro PDF Pro, see this article:
http://www.labnol.org/software/edit-pdf-files/10870/

CS6 Camera Raw - I can now only crop using aspect ratio in the custom crop setting rather than being able to set the dims in cm and inches? anyone know how to revert? ever since installing new mac operating system things have been strange!

CS6 Camera Raw - I can now only crop using aspect ratio in the custom crop setting rather than being able to set the dims in cm and inches? anyone know how to revert? ever since installing new mac operating system things have been strange!

Hi Kglad.
I have looked at all of my settings both in Bridge and CS6 Photoshop regarding Camera Raw. I am at a loss how to set the crop tool in cm or inches as I once did - now the only option is to crop using ratios of 1:1 etc etc - This is infuriating as lots of my square crops I could set at 10" x 10'' specifically to print one to one to fit frame and mount size -
Now if cropping using bloody aspect ratio of 1:1 (square) the actual dims of the crop are roughly 4.25 inches x 4.25 inches. this means I then have to open the whole image in photoshop in order to crop at the dims I have set! It was so much quicker in terms of batch cropping in camera raw being able to set dims in centimetres and inches but they have gone and mucked around with it, with the new bloody update! Unless you are an absolute genius and know how I can go back to having an option of CM, Inches and aspect ratio within the custom crop settings? (Please say you do)
here is the new tutorial for CC - my guess is they have scrapped the control we had over the custom crop settings
Cropping Images In Adobe Camera Raw 8

Mac mouse is too sensitive. Anyone know how to relax it?

Similar Messages

Maybe you are looking for