Mac no longer sees external USB audio device

Under System Settings/ Sound, I no longer see my Yamaha Audiogram 3 listed as an input OR output device. When plugged into the USB connector, I have power to the device. I tried a different USB port... same thing. I reloaded the driver, rebooted still no luck. Any help is appreciated.

I am also having this problem as it seems recent it may have something to do with updating to the new OS i think it was... 10.6.5?... I have also tried reinstalling Yamaha drivers and a few other things but with no luck.
if anyone has had a similar issue resolved please post, it seems a few people are having this problem

Similar Messages

Time Capsule 3rd Gen no longer sees External USB drive

Airport Utility 7.6.4 installed and no other updates are specified as avaiable.
For a while the external drive with two 1T Mac formatted partitions cannot be seen by network nor appears in Disk section of Airport Utility.
Mavericks used and all fully up to date.
Connecting drive to iMac and MBP directly allows use of the drive fine.
I think the firmware has stopped the external drive from being recognised. Did have the "USB Power" amber light occur some time ago but selected to ignore. External drive is powered of course.
Any ideas?

A Gen3 TC the USB port is seriously underpowered.
A powered hub is the first essential item to get this working. The fact that your disk is powered is insufficient.. I think also because of the limited number of USB devices the airport utility can work with.. even some powered hubs are simply not recognised.
For a while the external drive with two 1T Mac formatted partitions cannot be seen by network nor appears in Disk section of Airport Utility.
Mavericks used and all fully up to date.
The disk must appear in airport utility.
From there getting disks mounted in Mavericks can add another level of pain.. but recognition comes first.
The latest firmware is more likely a step backwards than anything.. I would downgrade the firmware to 7.6.1. Factory reset. Use all SMB naming, ie short, no spaces and pure alphanumeric.

Noises on external USB audio interface (Yamaha MW12) with Snow Leopard

Hi there,
I got an issue with strong noises (kind of distortion) while playing all kind of music/sounds ( itunes/Reason/Cubase) via an external USB audio device (Yamaha MW12 mixer).
Some important facts:
+ This had not been from the very first beginning of changing to snow leopard
+ but never appeared on "leopard"
+ Yamaha mixer is still working fine with my MS-windows computer
+ latest Asio driver by Yamaha is not helping.
+ internal audio of my Mac Book Pro is working fine.
As this issue just appears 2 days before, without any change or installation on my system, I really wonder, what could be happen. As Yamaha mixer is still working fine with other computer, I expect some driver in MacOS to be the problem (as internal audio HW is working fine).
Does anybody else, know, what to do? (before I change back to MacOS 10.5)
Has anybody else have seen a similar issue?
Thanks for helping in advance.
Merry christmas,
Mat
Message was edited by: d-trich

Hi,
just one addon.
+ Changed USB ports on MacBook and it was fine on the second used.
+ Nevertheless, noise remains on the originaly used port
+ all other connected devices as mouse and midi interface are fully functional on both ports
It still looks like a driver issue. Nevertheless, could it be a hardware issue with the USB port in my MacBook then? Even if all other tried devices are functional?
cheers, Mat

USB Audio Device sometimes not detected. udev, maybe?

I am using an external usb audio device which I usually keep plugged into my machine. I am finding that this device is sometimes not being detected when I boot the computer.
When this happens, issuing the following command:
$ aplay -L
does not list this particular device. Plugging and unplugging the device does not seem to help.
What does seem to resolve the problem is unloading and then reloading the snd_sub_audio kernel module. This is done by issuing the following commands:
# rmmod snd_usb_audio
# modprobe snd_usb_audio
Could anyone give some insight as to why the usb audio device isn't being detected and why this only happen occasionally? Could this be a udev issue? The device in question is an M-Audio Fast Track Pro.

Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

Windows 7 x64 USB AUDIO DEVICE - Device Not Working - Mac Pro

I have a mac pro early 2009. I had vista x64 installed, everything was great. I had 2 audio devices under device manager, one was listed as HD (digital) and one device was listed as analog audio.
When I played games and wanted the external speakers (using the digital out connection) I had the HD (digital) audio device enabled.
When I played games and wanted to use a headphone/microphone combo, I had the analog audio device enabled.
Switching between the two was as easy as clicking the audio device icon and clicking on whichever device I wanted.
Now that I installed windows 7 x64, I have a HD (optical out) device in device manager and it works perfectly. Unfortunately, I also have another device listed called "USB Audio Device" and it shows a yellow exclamation mark next to it and it is NOT working properly.
I tried many suggestions on here, which included downloading the cirrus logic audio driver and picking different models, as well as trying the snow leopard install disk driver for cirrus logic, and even tried installing the realtek analog driver. The closest I got to getting anything to work was installing the realtek analog driver. It installed fine up to the point when windows said "this driver is not tested, do you wish to install it anyway?" and I click yes, but then it pauses for a few seconds and the same message comes up again and repeats in a endless loop until you say "no, do not install driver" and then it does a uninstall of the driver.
Has anyone else experienced this problem and if so were you able to fix it?
Thanks
Message was edited by: What2be1

I found Gigabyte has links to latest updates which work fine.
Treat Mac Pro as just a dual Xeon PC.
http://forums.tweaktown.com/gigabyte/30530-latest-overclocking-programs-system-i nfo-benchmarking-stability-tools.html
Realtek High Definition Audio for Vista\Win 7 2.54
2010-11-05
Realtek HD Audio Windows 7
Or from Realtek which is http://218.210.127.131/
http://www.realtek-driver.com/
Guru3D is also a popular site for drivers.
http://downloads.guru3d.com/Realtek-HD-Audio-2.51_d2598.html
You can ignore USB audio, you want RealTek HD Audio. There are or can be some of those yellow alerts that are safe to ignore. Buried somewhere in Apple Support BootCamp technotes.
You can use installer from Realtek or zip file in which case just uncompress and update the driver from inside Device Manager. Nice thing, you can rollback a driver if you want to, or totally uninstall and then reinstall.

USB audio device no longer working w/ new kernel

Hi, all--
I have a Creative SoundBlaster Live! 24 external USB audio box which I have been using for probably 3 years--with Arch Linux and without any significant trouble. Suddenly, after a full system upgrade (so that I am now running the 2.6.27-ARCH kernel), it is not working. Alsamixer doesn't detect it, and the power LED on the box is dark (it draws power through the USB connection).
So far, the only relevant info I have found is in /var/log/messages. For USB connections I primarily use an add-on USB card plugged into a PCI socket (it's an Adaptec USB 2.0 card ... I can find more specifics if needed). That card has 2 ports, and I usually have the USB audio box and an external hub plugged into it. I currently have a printer plugged into the external hub. The hub and the printer were successfully detected at the last bootup, but
Oct 18 13:13:46 $MYHOSTNAME usb 1-2: new full speed USB device using ohci_hcd and address 2
Oct 18 13:13:46 $MYHOSTNAME usb 1-2: configuration #1 chosen from 1 choice
Oct 18 13:13:46 $MYHOSTNAME snd-usb-audio: probe of 1-2:1.0 failed with error -5
[of course, the actual hostname appears in the messages where I put $MYHOSTNAME]
Anybody have an idea what might be going on?
Thanks in advance for any clues.

Check the archlinux news item which calls for an entry in kernel commandline .................

USB audio device loses output connection

I use a MobilePRE USB interface and had no problems until recently. My iMac is set to never sleep but if I do not use the computer for a few hours the output from the MobilePre is gone.If I change to the driver to the internal headphone output on the Mac all is fine but in order to use the MobilePre as output I must restart, then it is fine until the next day or a few hour later.
The same time that this problem developed, about a month ago, I also noticed a low level snap or popping sound. This happens through my external speakers and is triggered by any sound activity approximately 30 seconds later. It even happens with the volume turned all the way down and sounds like a connection is being made. Like I said these two problems started about a month ago around the time Apple was sending a lot of updates. I have read a long thread on the OSX forum and know this is a pervasive problem with no solution yet. I mention it here as a curiosity as it started around the same time as the USB audio device problem. My hunch is that it has something to do with a recent update.
I don't think this is a GarageBand problem because it is the same no matter what software is outputting. I ask on this forum because there some knowledgeable audio heads here.

Check the archlinux news item which calls for an entry in kernel commandline .................

External Usb Audio Card Popping and Cracking sound with Satellite L500

Greetings,
My name is Boyan and I am from Bulgaria and about an year ago I've bought a satellite laptop from the l500 series ( i can not state which exactly is the model at the moment because my computer is not currently with me and on my user manual the only thing which is stated is that it is for L500/L505/ L500D / L505D . But by memory I think it was the Satellite L500D-ST5506 which is currently not at my dispossal because I gave it for repair for the same problem which I will state down below)
The problem with my laptop is that when I plug a Usb Audio card in my laptop I have a cracking sound when live sound is played trough the speakers/headphones from the external card. I've tried numerous audio cards and speakers/headpohnes which work perfectly fine with other computer, including laptops but the same problem keeps on showing up in the headphones/speakers of my laptop when I am using an external audio card to connect them to the laptop.
The problem is prominent only when the sound signal passes trough an external audio card and it is very annyoing since I use my laptop to create music and i've bought an expenssive audio card and speakers which can not be used with the laptop. I've tried 3 models of audio cards:
M-Audio Fast Track Pro
Behringer uca 222
and a simple external 3d sound usb audio card and the problem still appears.
At first I thought that the problem should be software and I should install new drivers although windows 7 automaticaly recognizes and intalls the drivers for the devices and I have sound in them (but with cracks and popps) so i tried using the official drivers sold to me with the audio cards but with no luck: The problem was still there. I tried finding new drivers of the audio cards on the official distributors websited and i've downloaded them but the problem was still there. Then i tried to delete every audio driver on my computer and just use the external audio card for sound but this dint help eighter. I've updated my drivers for my build-in audio card as well but again - no luck.
After that.the frist thing I did when (2 weeks after i bought the laptop) was to contact the store from which i bought my audio card and they stated that the problem may be eighter latency or high voltage from the laptop so they adviced me to try to lower the latency from the settings or to try and see if the problem remains if my laptop is only running on battery. I've tried both things and they didn't help. The audio cards worked without a problem on every other computer I've tried them on except mine. So they said to me that the problem couldnt possibly be from the audio cards .
What I did next was I gave my laptop to the official distributor of toshiba in my country so they can fix my problem. What they said to me was that the problem is caused from the version of windows which was pre-installed on my laptop and that it wasnt compitable with the audio cards (which was bizzar sounding because I've tried them on the same windows and they've worked, just on other computers). So I got back my laptop and changed my operating sistem from Windows 7 Home Premium 64bit to Windows 7 Ultimate Edition 64bit to Windows 7 Ultimate Edition 32bit and on all of those versions the problem was there: whenever I activate a Usb Audio Card and audio signal passes trough it I heard cracks and popps. I even tried isntalling Windows XP but the laptop wants spesific SATA drivers for the installation of Windows XP which although i did find - they didnt help me install XP and I didn't want to go in to the BIOS of the computer to try to put a new one and so on because I am not so sure about that and I could lose my warranty so I said to the official repair store for Toshiba in my town to put XP on my computer to fix the problem but they can't because they are not liscened to operate with software which doesn't have a recipt for its purchase ( which i didnt because i bought my windows xp long ago and i've lost the recipt)
I gave it for repair for the second time telling them that the change of my operating system did not solve my problem and what they did was they changed the whole motherboard on my computer, stating that the build in realtek audio device on my computer is not good enough to support an usb audio card or it maybe broken and they have to change the whole motherboard because the build in card is glued to it, so they did that but my problem wasn't solved. They told me that although I am using and external usb audio card the signal still passes trough my internal one and I have to disable it so i tried disabling it trough the control panel but this did not solve the problem and i do not have an option from BIOS to disable my build-in audio card. Another thing which I thought maybe causing the problem is that the two audio cards aren't working on the same bit rate and Hertz so I set both cards to 16 bit 48000hz DVD Quality (Also tried other options on the 3 cards i have) but...the same thing happend.
They told me that this is just my luck and that the build in audio card doesn't support this external audio cards and I should had been more careful when choosing my laptop at first.
I couldn't accept this awnser for several reasons:
1) This audio cards work on lower version of windows and are supported by much older models of Realtek and much older computers (one of them was bought 2000!!!!! and my laptop is from 2010!!)
2) The guys who were fixing the problem apperantley didn't go in so deep in to my problem because they didn't know what actually the problem was they just knew that there is a problem with the audio card and the computer interacting with eachother, they didnt know that there is cracking during live play from the external audio card.
3) I can not accept the fact that Toshiba is manufacturing models with chipset audio cards which can not support a simple external Usb Audio Card. This is totally unacceptable for me and I truly hope this is not the case!
4)They didn't try my audiocards on an other laptop from the same series stating that they do not have one at their dispossal at the moment so I will go tomorrow to a local store and try the audio cards by my self on the same computer in the store.
What I did now was I gave back my laptop for repair asking for a statement of the problem in wrtting with all details of the problem so I can go to court or ask for a new laptop but I will be charged with some money because according to them there is no problem in the laptop and the problem is that my external audio cards arent compitable with the build in internal chipset audio card. If I give my laptop for repair and there is no hardware problem I will have to pay some money. I will do this but I am now mad, since this will not solve my problem and I am loosing time and money.
What I am asking here is, if you can not help me solve my problem and advice me what to do to fix it, please provide me the details of the chipset build in audiocard on my motherboard, so i can investigate if it is compitable with my external audio cards and contact the audio card dealers to ask them for their opinion. Or if you can tell me with what it is compitable with and with what not, it would be great. I personally think that this laptop should have no problems at all with running a simple external usb audio card but I am asking you, if you know something more about that.
If the problem is from the build in chipset then Toshiba is manufacturing (or at least selling) audiocards which aren't at a normal standart but sadly I cant do nothing about it except complain to Toshiba and never deal whith such productgs anymore. In the other case if this is not true, then my laptop has a problem which is different and I will have to go to court with the repair mans for not fixing my laptop or not giving a new one when I have warranty which will not be Toshiba's fault and It will in a way solve my problem.
I hope you understand how Important this is for me and I hope I resolve the problem as soon as possible.
P.S
I would like to state that I am well aware of the grammar mistakes I have made in the text below and I would like to ask for your apologies as I am not a native English language speaker.

hi i just like to say i had a similar fault though i would be surprised if it causing yours,but you never know,my fault was my laptop lid, [9 months old] it contains the mic ,and when the lid was in a certain angle crackles could be heard worse when i had my external sound card in, it was a faulty membrane [ lid to body] easily missed by engineer because it was the same angle all the time it happened,good luck, PS you English is very good
Message was edited by: sido1

Volume control with USB Audio device

Hello all.
I have just purchased a cheap USB audio device to connect my HiFi to my laptop with only one, neat USB lead and a USB hub - meaning I no longer need several USB wires and an audio cable across my desk.
This works fine, but I have just noticed that the volume control in OS X has no effect on the output now, only Mute or On. The volume within iTunes works fine, but not the OS X one.
Any way I can avoid having to use the volume on the hifi when using the USB Audio device?
Many thanks.

Don't think so unless that piece of hardware came with compatible Mac software to control it.

No Digital Output available in Playback devices (USB audio device)

If one has USB audio device with coax/toslink out, with proper drivers (like ie TurtleBeach Micro Advantage) available & installed then Digital Output is available to select in Playback devices. (and one can play AC3/DTS to external amplifier with ie
VLC or MPC-HT with AC3Filter DS filter)
But some USB devices (ie Phonic Digitrack -
http://www.phonic.com/en/digitrack.html ) do NOT come with drivers (as Windows has default build in). Digitrack uses TI
Burr-Brown USB Audio Codec 2906 -
http://www.ti.com/product/pcm2906
Sadly these Windows drivers do NOT have a clue about what the device actually has as inputs/outputs
So even it had coax digital out & the sound IS send via it, the actual data send is in right way, not recognized/played correctly by Digital Amplifier (AC3/DTS)
Does anybody know of a hack to make Digital Out available?
Seb

Hi,
Generally speaking, An Audio Device do need more driver besides USB driver to make itself work properly. In terms of your situation, USB driver is not enough to make your Audio Device works properly. I think S.Sengupta
is right. Actually it would be better to contact Digitrack support to confirm its product compatibility with Windows 7.
Roger Lu
TechNet Community Support

OS X 10.7–10.10 iSub workarounds? USB audio devices?

The old Harman/Kardon iSub (USB subwoofer) never worked right with Intel Macs—but it was always a software issue, which could be worked around: I read years ago about people connecting USB headphones or speakers, which "tricked" the Mac into sending audio to the iSub. (In the case of headphones, I assume they would also use Audio MIDI Setup to make a Multi-Output device allowing sounds from your normal speakers at the same time as the 'phones.)
Does that trick still work in Yosemite? If not, when did it stop working? Can't seem to get it working on my 10.7 laptop with Jabra Revo Wireless headphones connected to USB (they have wired modes as well as wireless).
Any other workarounds? I'd love to get this thing going with either 10.7 or 10.10! Requiring an additional USB audio device isn't a great workaround... but I happen to have such a device anyway!
Thanks for any ideas.

removed TextEdit related files in /Users/gordan/Library/Preferences (mainly .lock files) , now it is working

USB Headset detected, but not being loaded as a USB audio device.

Hey,
I just bought a Gigaware USB Premium Audio headset with Mic, and I'm currently trying to get it to work. It does show up under lsusb:
Bus 002 Device 004: ID 0d8c:0105 C-Media Electronics, Inc.
Bus 002 Device 003: ID 046d:c01e Logitech, Inc. MX518 Optical Mouse
Bus 002 Device 002: ID 06a3:8021 Saitek PLC
Bus 002 Device 001: ID 1d6b:0001
Bus 001 Device 001: ID 1d6b:0002
It's showing up as the C-Media Electionics, Inc. device. Unfortunately, for an unknown reason to me, it doesn't want to be set up as a sound card, as in DMESG:
generic-usb 0003:0D8C:0105.0004: input,hidraw3: USB HID v1.00 Device [C-Media Electronics Inc. USB Audio Device] on usb-0000:00:0b.0-5/input3
cannot find the slot for index 0 (range 0-1), error: -16
cannot create card instance 0
snd-usb-audio: probe of 2-5:1.0 failed with error -5
usbcore: registered new interface driver snd-usb-audio
As you can see, I get three different errors. I've googled all of these, but have come to no conclusion as to what they mean, or a solution to them.
Any helps much appreciated,
Alex

The format says Mac OS Extended. All of the settings were set during the disk image restore process. Even if I format the flash drive as extended journaled or some other format, all of these settings are reverted when I do the restore from the disk image. I will just copy all of the information that disk utility has so that you can see it.
Mount Point : /Volumes/Mac OS X Install ESD Capacity : 16.11 GB (16,106,110,976 Bytes) Format : Mac OS Extended Available : 12.3 GB (12,303,499,264 Bytes) Owners Enabled : Yes Used : 3.8 GB (3,802,611,712 Bytes) Number of Folders : 128 Number of Files : 876

Cannot see my plugged in USB audio device (Schiit Loki DAC)

I can not see my plugged in USB audio device (Schiit Loki DAC). Can anyone help?

According to the manufacturer, Loki does not need any driver to work with Mac. Funny thing is, I tried it on an old Macbook runing OS X Version 10.4.6 and it worked! Schiit Loki showed up in both Sound and Midi settings. I then took the Loki to the local Apple Store and tried it on their new Macbook Air (same as mine running OS X 10.9.1 and it failed again. The Macbook Air just could not see my device at all.
Talked with one of their technical experts and he just told me to get a driver from the manufacturer, he wasn't very helpful. I am about to give up: convinced that Loki simply will not work with Macbook Air for some reason. If anyone had an experience that showed otherwise, I would be very happy to know. Thanks for helping.

Usb audio device support in Mavericks

It seems everywhere I look USB audio devices do not work (or do not work well at all) with Mavericks. With yet another OS X update coming I'm nervous that developers will be even further behind Apple's USB audio chaos. Does anyone know what may be on the horizon? I'll have to downgrade if this there's no remedy. I'm amazed there's so little support in Mavericks for USB audio - especially since all new Macs have no distinct mic input.

Do you have a question, otherwise your post comes across as a rant.

Recording into Audition 3.0 via Behringer UFO202 USB audio device

I am running Audition 3.0 on a PC with Windows 7 Home Premium. This may not be the proper place for this question, but I was not able to put it on the Adobe Audition 3.0 and earlier forum.
I am trying to record cassettes into Audition via a Behringer UFO202 USB device. I plug in the USB and my computer sees it and I can hear via the headphone output that it is playing. I go to the Windows Recording Mixer and it indicates that a USB audio device is working. However, I cannot get the sound into Audition. It doesn't show up when I record to the edit window or click on the meters to monitor.
I am also using a HT Omega Sound Card, but their support said that it shouldn't interfere.
Any help would be greatly appreciated.
thank you,
New Orleans Audition User

Unfortunately you cannot reduce the levels of audio on it's way into Audition. Audition just records whatever the audio interface sends it. If the levels are that high when recorded into Audition then it is likely that you could be overloading the input to the Behringer interface. You need to somehow reduce the level at source in the analogue domain. Once it is in the audio interface at too high a level then any distortion caused will be burnt into the digital audio file and you won't be able to get rid of it.

Mac no longer sees external USB audio device

Similar Messages

Maybe you are looking for