Mac not connecting to a wifi network when trying to reinstall OSX using Internet recovery

Hi guys. I'm using a Macbook Air(late 2010 model) and seem to have some trouble reinstallling OSX 10.8.5 using Internet recovery. When I'm trying to reinstall the OS running the recovery mode, the wifi is not connecting. After some trials I noticed that when I run the recovery mode, the network settings are automatically going back to defualt ( I use manual IP address and everything but in recovery mode it falls back to 'Using DHCP'). Just let me know if I'm supposed to provide any other information. I request everyone to help me with this. Thanks in advance.

I reccomend to set ur router back to dchp and after you are done with recovery set it back to manual ip. Or if you have the DMG of the ur installation, create a bootable installation disk. Several tutorials on youtube based on your OSX version and reformat that way.

Similar Messages

  • Deskjet 3050 not connecting to my wifi network

    Accidentally pressed Restore Default and my printer will not connect to my wifi network. How do reinstall it please?

    Hi @Rotini 
    A full feature driver for Yosemite is not available for your printer, either from the CD that shipped with your printer or from the HP website. This document applies to HP printers supported in Mac OS X versions 10.6 (Snow Leopard), 10.7 (Lion), 10.8 (Mountain Lion), 10.9 (Mavericks), and 10.10 (Yosemite) that only have drivers available through Apple Software Update.
    With that being said, I can help you put the printer on your wireless network without software. I use this method for iPads, iPhones and other devices that do not have software.
    Restore the network defaults on the printer by pushing the wireless button, going to settings, and then restore defaults. The wireless button should then start flashing, this means it is now in autowireless mode.
    Connect to the network that the printer is broadcasting. It is usually HP-setup-3050a and then part of the MAC address. The wireless light will still be flashing on the printer at this point, this is normal since this is not an actual adhoc connection.
    Load up the Embedded Web Server (EWS) in the browser on your mobile device. The default IP for autowireless is 192.168.223.1.
    Go to the network tab along the top of the EWS.
    Click on Wireless Setup Wizard along the lefthand side to begin configuring the printer.
    You have now completed the Wireless configuration, follow the next 3 steps to start printing.
    The blue wireless light will go solid, put the Mac back on your own network.
    Add the printer to the System Preferences.
    Print 
    Please let me know if this resolves the issue. I look forward to hear from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home. I have restared the phone and toggled the router, still no connection

    After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home (this is the network I used to update the phone). My iPad however does not seem to have any problem connecting. I have restared the phone, toggled the router, re-entered the network password but there's still no connection.

    When your device is trying to connect to the work Wi-Fi network, go to Settings > Wi-Fi > then tap on the name of the Netowrk that she is having trouble with. Then tap on forget this network. Let the device attempt to connect again and make absolutely sure she is trying to connect to the work network and not a nearby network, then make absolutely sure the password is entered correctly.

  • My ipad mini is not connecting to the wifi network. I have the correct network and password chosen, but the message I get is that "unable to join". I have reset my ipad and it still says the same thing.  What can I do about this.

    My ipad mini is not connecting to the wifi network. I have the correct network and password chosen, but the message I get is that "unable to join". I have reset my ipad and it still says the same thing.  What can I do about this?

    Hey Dr kris,
    Thanks for the question, and welcome to Apple Support Communities.
    I understand that you are having issues connecting to Wi-Fi networks with your iPad mini. The following troubleshooting assistant may lead to a resolution:
    Apple - Support - iPhone - Join a network Assistant
    http://www.apple.com/support/iphone/assistant/wifi/
    For more in-depth troubleshooting, refer to the following article (refer to the "Unable to connect to a Wi-Fi network):
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Thanks,
    Matt M.

  • Trying to set up my brand new MacBook Pro and it does not connect with the wifi network I have selected for this purpose. Nothing wrong with the wifi as both my iPad and iPhone are happily connected. Suggestions for connecting to the wifi network accepted

    Setting up my brand new MacBook Pro and it will not connect to the wifi network. Nothing wrong with the network which is happily working for my iPhone and iPad! Suggestions accepted for making this connection.

    Fixing this is a two step process:
    1) System preferences > WiFi/Airport ...
    ... check [√] Ask to join new networks
    "Known networks will be joined automatically.
    If no known networks are available, you will
    be asked before joining a new network."
    2) Remove unwanted networks from the list of "known" networks under
    System preferences > WiFi/Airport > (Advanced) > | Airport/WiFi pane ...
    Close the window and save changes. If no joy, do a restart to ensure you are playing under the new rules.

  • TS1398 I have an Iphone 5 and it will not connect to any WIFI networks - I have tried following the steps above (including reseting network settings) but it just says 'incorrect password' every time. How can I resolve this?

    I have an Iphone 5 and it will not connect to any WIFI networks - I have tried following the steps above (including reseting network settings) but it just says 'incorrect password' every time. How can I resolve this?

    you have definitely tried the correct steps, all you would need to do now is a back up & restore to factory settings. If after that the issue remains then you would most likely need a replacement unit.

  • My iPod touch 5th generation will not connect to secure WiFi networks.

    My 5th gen iPod touch will not connect to Secure wifi networks. It always says incorrect passcode. I have checked the passcode over and over again and I am sure it's correct. it's not just happening with my home network, also at work it never works. It is fine connecting to unsecure networks though. please help me.

    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I just bought a used i book g3 it will not connect to my wifi network, I bought two of them actually one is a g4 other g3, the g4 connects fine, but the g3 not so much. If anyone would have the answer on how to fix it or run a test on it.

    I just bought a used i book g3 it will not connect to my wifi network, I bought two of them actually one is a g4 other g3, the g4 connects fine, but the g3 not so much. If anyone would have the answer on how to fix it or run a test on it.

    Make sure your network has 802.11b activated. The G3 only supports the "B" wireless networking protocol. Modern networking is "G".

  • I have a new comcast modem i have connected to Time Capsule with cable, TC in double NAT. As when I tried it in bridge mode I cannot use Sonos, the units will not connect to the wifi network? I thought Bridge mode would make the wifi signal better??

    I have the TC connected to the comcast modem, with TC in Double NAT mode. I set up the sonos music players ok. But I read that to incresae the wifi signal the TC should be in Bridge mode. Then I cannot get any of the Sonos units to connect to the wifi network.
    So two questions, does the Bridge mode give a better wifi signal then double NAT?
    Why will sonos not connect to the network when in Bridge mode?

    A PC can have more issues connecting than a Mac.
    But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
    If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
    Important thing is to get access to the TC.
    The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
    http://support.apple.com/kb/DL1482

  • My ipod 5 was stolen but I have find my ipod installed on it but my ipod isn't/never was connected to a wifi network when it was stolen so how will my ipod play sound or go on lost mode and if there's no wifi connected to it?

    my ipod 5 was just recently stolen in a waterpark (same with my best friend) and when i went on to find my ipod I pressed play sound and lost mode but it never successfully did all those things because my ipod wasn't or isn't connected to a wifi network as it says in the app. so how will I ever find my ipod if it never is going to connect to a wifi network without the thief accessing my ipod (I have a passcode). and also when I check the app once in a while it says ipod is online but cannot find location, so does that mean the thief is using my ipod or is trying to get in?

    Yo are correct. It has to connect to internet for the FindMyiPhne features to be transmitted to the iPod
    lost/stolen                                     
    No app on the iPod is required.                           
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or conbtinue to show off-line.
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    iCloud: Erase your device
    iCloud: Use Lost Mode
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                               
    Reporting a lost or stolen Apple product                                              
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • [TroubleShooting]Continuity Wi-Fi issue. iPhone and mac not on the same wifi network

    Ive been following this and other forums since Yosemite came out few weeks back & i can see many other people are having this issue as well.
    The issue is that I'm not able to make/receive calls on my MBP using my iPhone via continuity.
    Ive tried all of the possible solutions made here and elsewhere on how to resolve this issue. [playing about with settings and iCloud]
    When I'm at home all of the handoff and continuity features work apart from making and receiving calls. Tells me my mac and iPhone are not on the same wifi network, even though they are.
    Now, the solution?
    Now this is where tourbleshooting comes in. Ive taken my mac and to my homegirls house & all of the features worked including phonecalls, without changing anything, except?? THE ISP and the router at her house.
    Personally i live in London, Uk. At home i have sky, and my girl has TalkTalk.
    So im 99.9% sure this has nothing to do with the OS X, but rather its the ISP or the router.
    Now I'm asking for help from anyone that understands the ISP's and routers, on what kind of issue there might be. Im no computer wiz kid, but I'm guessing it could be something that has to do with the NAT type. (Call of duty on ps3 haha) At my house its moderate and my homegirls - open? could that be the issue? if so are there any router settings i can play about to see if that solves the issue?
    Thanks.
    Please only post if you know what you're talking about because i don't want anyone giving me some next instructions for my router so i end up without internet what so ever haha And whoever is having the same problem, id appreciate if you'd post on this to keep the post alive

    Hey chrisfromdc,
    If you are having an issue with your Mac being unregistered with iMessage and FaceTime, I would suggest that you troubleshoot using the steps in this article - 
    If you have difficulty activating FaceTime or iMessage - Apple Support
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

  • My mac wont connect to the wifi network but all other devices are working fine! Please can you help

    My Mac wont connect to my WiFi.  It can see the network but has an "!" over the WiFi signal. My iPhone and Surface connect fine.  My Mac was working fine yesterday.  I've restarted the rooter, the Mac and still not luck.  I've changed the WiFi channel, removed and re-added the WiFi network, but I still can't connect. Please can someone help.... thank you !

    Power Cycle
    Power off the router. Unplug it from the wall. Wait a while.
    Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
    Restart the computer.
    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204?viewlocale=en_US

  • HT4623 On my iPhone 5, iOS 7 will not connect to my wifi network

    iOS 7 will not connect to my wifi.  it sees my wifi network and looks as if it connects, but never does.  can this be easily fixed?  and yes wifi is turned on on my iPhone 5.

    Hello there, JLMock.
    The following Knowledge Base article provides extensive steps for troubleshooting wi-fi issues:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Can't connect to my wifi network when external monitor is connected

    The computer is a very new Retina Macbook Pro. The monitor is an older Alienware/Benq 20" (3:4) LCD. I'm using a DVI to mini-displayport adaptor and plugging into the thunderbolt ports on the Macbook Pro. Router is a Belkin F5D8233 Wireless N router. As soon as I connect the monitor my connection to my wifi network times out and refuses to let me connect (every attempt just results in a "connection timed out" error). However, I was surprised to find that I could connect to my neighbor's network without any issue. Anybody have any idea what the issue could be?

    Maybe related to bullet #7 here http://support.apple.com/kb/HT1365.

  • My ipod touch will not connect to the itunes store when trying to download an app.  message saying Cannott connect to itunes store

    My ipod touch will not connect to itunes store.. when downloading an app. message appears  cannot connect to itunes store.  resulting in failure of download

    Try here:
    Can't connect to the iTunes Store
    It may be an Apple problem since ther has been other posts today wih the same problem.

Maybe you are looking for

  • Xorg Intel problems

    Interestingly enough I managed to solve this fairly quickly, but figured I would post in case someone else had a similar issue. I recently ran an upgrade and Xorg stopped working.  The whole No Screen issue.  When I looked at my xorg.conf it showed V

  • Can I create sub-categories in events?  e.g. 2011, holidays, America?

    CAn I sub-classify events.  Now have too many events to scroll through?

  • Office control in mobile client 7.1

    Hi all, i've included an office control in my mobile application to show a word document. However, when i open my application, i receive following error: Fatal HTTP error 500 occured. Connection is closed now. The exact error information is logged in

  • Need help! (begginer but cannot begin yet)

    I need help! I want to learn web services and I want to do it with Java but I don't understand what should I install for it? Can you explain it please? (both linux and windows are welcome)

  • Adobe Air Applications Not launching. Flash Builder 4.5.1

    I had this issue before where only flash based applications would launch but not adobe air. The issue is when you click run on adobe air, in the task manager on windows 7, 64 bit you get: Adobe Air Debug Launcher. Killing that gives me: If the progra