Mac not reading downloaded flash update

my mac is not reading my latest version of adobe flash. when i go to a program that needs flash to run, it asks me to download again. why??
i have uninstalled and reinstalled the program.
any suggestions

Could you please let us know the browser that you use.
Also, what you see in the Find Flash Player page.
Thanks,
Sunil

Similar Messages

Mac not reading usb black x duet hdd, mac not reading usb black x duet hdd

mac not reading usb black x duet hdd

Try a SMC reset:
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.

Mac not reading certain DVDs.....

Can someone offer a download/quickfix to this problem? One DVD in particular works fine on my DVD player connected to my TV, but will not read on my computer.
Is there something I can download to improve the readability of the software? I have Toast 7 and IDVD, but I think the problem isn't with either player, but something with the machine.
Thoughts ?

Many have reported mixed results reading DVDs on Macs and here are the most common reasons:
1. If these are all commercial movie DVDs, and they are the standard size on
http://docs.info.apple.com/article.html?artnum=58641
and the problem is strictly with playing movies, I'd contact Apple here:
http://www.apple.com/contact/phone_contacts.html
2. There are some programs in the media content of discs that only work on Windows or a special DVD Player called Interactual Player. http://player.interactual.com/default.asp?code=MAC
3. If these are homemade DVDs it gets stickier. Many people burn to DVD something other than the standard Video_TS folders, thus they aren't playable in a standard DVD Players. DVD-R DL is not as supported as DVD+R DL.
Older Macs don't support DVD+R DL or single layer at all. To find out if yours does, check the specs of your Mac:
http://www.info.apple.com/support/applespec.html
If the Mac only supports CD-ROM, CD-RW, or CD-R, then it doesn't support DVD at all. Combo drive Macs support playing DVD-ROM and DVD-R discs, but now DVD-RW or DVD+R unless the specs actually say those formats are supported. Superdrive Macs of varying vintages may support DVD-R, and DVD-RW, but not DVD+R or DVD+RW when it comes to burning.
PC burnt DVDs in UDF or Joliet may not read at all whereas those burnt in ISO 9660 have a much better chance of being read. For UDF, you may need:
http://www.softarch.com/us/products/rdvd.html
4. DVDs burnt for different regions than a region locked DVD drive may also not play:
http://docs.info.apple.com/article.html?artnum=60183
(Thanks to a. brody)

HT1338 Why will my mac not do a software update

Why will my mac not do a software update

Is there any error message provided that indicated why the update fails?
E.g. "An unexpected error occured" Anythng like that?
These messages provide guidance for people offering assistance so that it is targetted and appropriate.
Someone might suggest pulling a plist like /Library/Preferences/com.apple.SoftwareUpdate.plist but if the issue is insufficient space on the Macintosh HD or an error connecting to the Update Server or a security certificate error the removal of the plist would be pointless.

How to *not* automatically download flash video

Hi,
I can't get my Flash video to *not* start downloading when I access my page.
The problem page is - http://www.camerawallihpictures.com/reel.php
There are six videos on this page. When I access it, all the videos start to download - the progress bar on all videos shows the downloading.
They don't start playing, they just download.
Does anyone know how to stop this?
Thanks in advance for you help!
Josh

Thanks for your interest.
Yes, the flvplayback compenent.
I created the flv file with adobe media encoder, then went through the standard File > Import > Import Video method.
I've set both the autoPlay parameter to false and set the HTML Publish Setting "Paused at Start" to false.
Note - Even though automatically *playing* is not really the problem, I've set both those to 'false'. Actually, the autoPlay functionality works properly for me whether true or false.
I'm using CS5.
Here's the html
            <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000"
                    codebase="http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0"
                    width="448" height="376" id="destino_tvc" align="middle">
                    <param name="allowScriptAccess" value="sameDomain" />
                    <param name="movie" value="media/video/destino/destino_tvc/destino_tvc.swf" />
                    <param name="quality" value="high" />
                    <param name="play" value="false" />
                    <param name="bgcolor" value="#000000" />
                    <embed src="media/video/destino/destino_tvc/destino_tvc.swf" quality="high" bgcolor="#000000"
                            width="448" height="376"
                            play="false"
                            name="destino_tvc" align="middle"
                            allowScriptAccess="sameDomain"
                            type="application/x-shockwave-flash"
                            pluginspage="http://www.macromedia.com/go/getflashplayer" /></embed>
            </object>
Josh

Can not complete downloads or updates on any apps. Just says "waiting" for days now

Can not download or update apps. For days now it just says "waiting".
Any suggestions?

Is it also possible that you have a movie or song or podcast that coudl be 'stuck'? That's happened with many people. It's like the download pipe is a one lane road and any 'broken down' download jams up traffic behind it until it's deleted or resolved.
Above is the answer I found that worked

My I mac desktop wont download Adobe update

Ive been having problems with downloading an update to adobe flashplayer all my feeds are blocked plug_ins it says which abode update is required how can fix this? I see the download window it gets to 95% and then disappears and no installation process comes up.

Try the offline installer:
Internet Explorer:
http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_ax.exe
Firefox and other NPAPI browsers:
http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player.exe
Mac:
http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg

With a new Mac 10.x downloading the update 5.0 hangs up and will not progress. Have tried repeatedly.

When given the opportunity to download the latest version/upgrade of Firefox, I start the process and it just hangs up in download. I have a Mac with 10.x OS.
I have tried probably 15 times.

Will Photoshop work with Yosemite? And will Illustrator, After Effects, Premiere Pro or the other Adobe Creative Cloud a…

Firefox refuses to download Flash Updates

Trying to update flash via the browser since that seems to be the only way now. But it refuses. The last 2 updates, every time I have tried, the Download is immediately canceled and no matter what I do it will not download. Last update I had to get a friend to send me the file directly.
* Firefox 17.00
* Shockwave Flash 11.4 r402
* Next Generation Java Plug-in 1.6.0_37 for Mozilla browsers
* NPRuntime Script Plug-in Library for Java(TM) Deploy
* Google Update
* Adobe PDF Plug-In For Firefox and Netscape "9.5.2"
* 1.7
* iTunes Detector Plug-in
* The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
* Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
* DRM Netscape Network Object
* Npdsplay dll
* DRM Store Netscape Plugin

Normally I'd go about it like this:
# I suggest backing up your data in Firefox (Bookmarks and all) and uninstall it. I'd use [http://www.revouninstaller.com/revo_uninstaller_free_download.html Revo Uninstaller] to remove the application, it's files and registry entries. Use the free version, it does not make much difference with the pro.
# Download and Reinstall [http://www.mozilla.org/en-US/firefox/new/ Firefox]
# Reload your data (Import bookmarks)
# As for Flash, download the plugin via [http://filehippo.com/download_flashplayer/ Filehippo]. Choose the Non-IE version and select which one suits your OS (32bit or 64bit). This is a system-wide Flash installer so other browsers like Chrome or Opera gets Flash using this method as well.

Why Wont My Mac Os X Download Flash Player?

My Version Of Mac Os X is 10.5.8 and i try to download adobe flash player but it wont work i cant do anything because i dont have adboe flash player and its really boring. Please find an answer to this thank you and bye.

MacOS 10.6 or higher is required to use Flash. If you have an Intel Mac, you should be able to download the latest MacOS from the AppStore for free.

Mac not reading Airport express.

Hello..
I just bought the airport express and I connected the ethernet cable from my cable modem to the port. At this point the Airport light was green and the lights on my modem were flashing as if it was working.
Thinking this was a great start I went to the Aiport Setup Assistant and chose to set up a new airport base station. An error comes up telling me "no new airport networks were found". I can't get the internet to work, and I've tried with my mac and my girlfriends pc.
Two things:
1. What can the issue be?
2. Why are the modem lights flashing as if there is a connection to something.
Any help would be great. Thanks.

Make sure that you have Airport turned on in the
Airport menu in the menu bar. If it is turned on,
make sure that the Express is in an unconfigured
state. To do so, press and hold the reset button
until the LED flashes rapidly. Then try running the
Airport Setup Assistant again.
Yes it says that its on, but yet I am getting no bars on my mac.
Do I need to configure anything on my mac so the Airport signal is read. It seems like my system just isnt reading the port. AHH..Sorry..not super computer savvy, yet really want to get this working. Thanks so much.

Mac not recognizing installed flash player

Hi, I have insalled the latest version of adobe flash player a couple times and my mac is still not recognizing it, hopeing someone could help me out!
What I am working with: Mac OS X 10.6.8 Safari version 5.1.10
Thanks!
-BreeAna

ATTENTION MAC CUSTOMERS - Flash Player 13 "Plugin Failure" Workaround
Take it back to 12.

XMP Files from MAC Not Reading On PC

My question is two-fold, so I apologize that this is long, but it will be best with the backstory:
I shoot Raw on a Canon 5DMIII and import my images into Lr5 on my PC as CR2 files. I am beginning to work with an editor for the post production of my images and upload my files to her via Dropbox. In effort to keep the files as small as possible (and upload/download times shorter), I export my images as DNGs. Specifically, I ensure the 'Use Lossy Compression' option is checked and the 'Embed Original Raw File' is unchecked. I then resize the image to 2000 pixels on the Long Edge and the overall file is under 1MB.
She then imports the DNG files into her iMac for editing also in Lr5. Prior to my exporting, I will edit a few images as sneak peeks for my clients, flag them as a 'pick' and code them as 'red'. When she imports my DNGs, she can see the 'red', but she cannot see the flagged images. Fine, this is something I can live without. She does her editing, also flagging them as a pick and coding them red. She then exports as the original file.
She then uses ExifTool, opens the terminal application and write in: "exiftool -xmp -b -w xmp -r", drags in the DNG files and exports the XMPs. She then sends the XMP files back to me, I place them into my folder with my original RAW files, tell my PC to 'replace' the XMP files that are already in the folder. Then in Lr5, I highlight all my files and select 'Read Metadata From File'.
Now, initially, nothing happens. I am unable to see any images flagged or coded red. However, I do see the 'attention' icon (I'm sure that is not the right name for it) on the upper right corner of the images she has edited when in the library module. If I click on it, it tells me that the MetaData has conflicting information and do I want the file or catalog to be primary. I click on the 'file' option and only then do I see her edits, including the 'red' coding (but not flagged as 'pick').
Part 1 Questions: Why when I am instructing it to 'Read the MetaData From File' is it not automatically picking up her edits? Am I doing something incorrectly when I put the XMPs back in the original folder with the RAW images and have the XMPs replace the originals? Is it normal for the 'pick' flags to not transfer?
Part 2 Questions: When she edits my images, she creates a virtual copy and creates one color and one b+w of each image for my clients. As such, she sends me back two XMP files for one image. How do I get these 2nd XMPs to map to the virtual copy within my library, as I am only creating the virtual copy of an image once I know it is one she selected for the final gallery. If I create a virtual copy of an image she edited after-the-fact, the b+w XMP cannot locate it.
Any guidance is appreciated! Thank you!

I never tried this, but I'm pretty sure that with DNG files, Lightroom will ignore xmp files, even when you instruct Lightroom to "Read Metadata from File". Lightroom expects all the metadata to be in the DNG file, not in the xmp file.
Pick flags, as far as I know, are never written to xmp file; nor are they written to DNG files.
If you're going to make this transfer procedure work, you need to do it by either (a) embedding the metadata in the DNG file and send those back and forth; or (b) use RAW and xmp and then sending the xmp files back and forth (plus I guess you have to transfer the original RAW once to your editor)

Mac not reading RAID drives

I have been having problems with my ATA VideoRaid drive of sometimes the computer not recogning it and not mounting it to the desktop or finder. I go to the system profiler, and it recognizes it there. It is connected through a SCSI cable connection. I go to Disk Utility and it recognizes it also, it recognizes the ATA RAID drive, and it also recognizes it as the name I have given it, MediaExternal. But the MediaExternal portion of it has like a blank document image next to it.
The MediaExternal is the way I formatted the drive, Mac OS Extended. I have been having problems with this RAID, with it loosing sync during a video capture. I use this RAID with Final Cut Pro editing system. I have fixed the problem with the sync loss, mostly after buying Disk Warrior and basically erasing the whole drive, and trashing the preferences in FCP.
But now my problem is with the drive not mounting on the desktop or finder. Any advice!
G5 Dual 2 GHz PowerPC
8 GB DDR SDRAM
Mac OS X 10.4.8

It won't allow me to verify permissions or even repair them. It will only allow me to verify disk and repair disk, in which both of those came back ok. I really can't back anything up, because it won't even allow me to access the files.

Mac not reading Disc full of .VOB and other DVD files

Hi all! I wasn't sure where to put this so here I am.
I'm currently transferring old VHS cassettes to DVD-R using the Sony RDR VX530. The disc plays in the Sony. I finalize it and take all appropriate steps. When I insert the DVD-R into my MacBook, it says "Burnable Disc" and shows no files. None at all. I took the disc to my sister's house and put the disc in her Windows laptop and ::BAM:: all the files were there and playable on the windows machine. What gives? I can put other dvds in the drive and see the Video_TS and Audio_TS files, but not the ones I record on this machine. The machine only has two recording options, VR and Video, both of which have to be finalized. Is there a solution besides me having to go borrow a windows laptop to connect to the network so I can pull the .vob files onto my mac?

It sounds to me like you didn't finalize your DVD!
Most DVD recorders and DVD cameras don't finalize the DVD until you specifically tell them to. This finishes writing things like file system information on to the disk but it also makes it so that more data cannot be written to the disk in the future. (This is why it doesn't do it until you tell it to).
Some Windows computers have software that allows them to read disks that haven't been finalized yet. I actually think its a feature of Vista and 7 but I'm not sure about that. Either way, look in your DVD recorder's manual about finalizing the disk to get it to work on your Mac.
Regards,
-Ryan

Mac not reading downloaded flash update

Similar Messages

Maybe you are looking for