Mac not recognizing AP Express after AP Extreme password change...

I have an Airport Extreme Base Station and a Airport Express as an extender. I went on Airport Utility and changed my wireless password. Since then my macbook pro is unable to recognize my Airport Express and the yellow light is flashing on the unit itself. I am still connected to the internet through the Extreme Base Station but am no longer picking up the express's signal and there is no output. Any suggestions? Very frustrating

Welcome to the discussion area.
I suggest that you temporarily, move the AirPort Express close to your computer and connect an ethernet cable from your computer to the AirPort Express to see if AirPort Utility can communicate to the Express that way.
Open AirPort Utility and click Manual Setup
Click the Wireless tab below the row of icons
You will need to enter the same wireless network password that you gave to the AirPort Extreme so the Express will be able to join the wireless network.
Click Update to save your changes and move the Express back to the desired location.

Similar Messages

I can not install the Express after the Extreme tha AirPort tool is of no help. It does not display any base station.

I can not install the Express after the Extreme tha AirPort tool is of no help. It does not display any base station.

What is the exact model of the AirPort Express that you are trying to install? Which version of the AirPort Utility are you using? What is the operating system and version, and on what device, are you running the AirPort Utility on?

Airport Utility not recognizing Time Capsule after Airport Extreme Update08

After installing the Airport Extreme Update 2008 my Time Capsule keeps crashing. I have powered down both my DSL modem and the Time Capsule, done a hard reset of the Time Capsule and yet it continues to flash amber lights. Yesterday, after hours of resetting everything and finally getting a green light and an internet connection, today my network and all of the airport setting have completely disappeared. Is anyone else having this problem and if so, have you found a solution? Is there a way to uninstall this updates as I believe it has caused these issues?

Josto,
Unfortunately, you are not the only one:
Latest OS X Airport update Broke connectivity
[http://discussions.apple.com/thread.jspa?threadID=1771190&tstart=0]
*_Contact Apple For Support Issues_*
If you are continuing to experience issues, make sure you contact Apple. They do not look at these forums to gauge the extent of issues. You need to contact them or they will never know.
Phone:
U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
Feedback:
"Tell us how we’re doing. Select the appropriate feedback option (we read everything, but can’t always respond):"
[http://www.apple.com/feedback>
*Genius Bar:*
"An Apple Store Genius Bar is the place to go for advice, hands-on technical support, and hardware repair from a Mac Genius." Find your store and make a reservation at this link:
[http://www.apple.com/retail>
Cheers!

Mac not recognizing Time Machine after Mavericks Clean Install

Hello,
I just did a clean install of OSX Mavericks and I can't access any of my Time Machine backups and am very worried about having lost all my data.
Before I did the clean install, I backed up data using my Toshiba 1TB External hard drive using Time Machine. It backed up successfully and has been doing so for about a year.
After the successful clean install of Mavericks, I plugged my external hard drive in, to which I was prompted with "would you like to use this hard drive for Time Machine Backups?" I clicked yes, and it said "Decrypting Time Machine Backups." I got worried and quickly cancelled the decryption process.
Now, whenever I plug in the external hard drive, nothing comes up. I can't access any of its files. Whenever I open the Disk Utility application, it does recognize that its plugged in, but its grayed out, and I can't do anything with the drive.
I'm very worried about losing all my data and info and would greatly appreciate any insight about this.
Thanks
MacBook Pro
15inch Late 2011
OSX 10.9.1

Solved. Right click on the hard drive in Disk Utility, click "unlock."
So simple, yet so obscure.

Mercedez Benz COMAND System not recognizing iPhone 5 after iOS 8 update, can we expect the same result with iPhone 6 or 6 plus?

Mercedez Benz COMAND System not recognizing iPhone 5 after iOS 8 update, can we expect the same result with iPhone 6 or 6 plus?
I'm planning to purchase the 6 plus, but I need to know from where.whom will the fix for this problem emerge.

My new iPhone 6 paired perfectly with my Mercedes system. That said, on your iPhone 5, reset your network settings and then try to pair it again.

My mac not recognize wi-fi after sleep mode ?

my mac not recognize wi-fi after sleep mode ?

Try this when it wakes...
Instead of joining it from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.

Iphone not recognized by itunes after upgrading to IOS6

After upgrading ti IOS6 my Iphoe opende and says "configure" and then tells me to connect to Itunes. Problem is that when I start Itunes and connect the Iphone to my computer via USBport is is not recognised by Itunes and not found as a unit. What do I do? The phone will not open and doesn´t funcion.... Anyone knows how ta handle this?

Hi there Karin01,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
-Griff W.

IPhone 3GS/iOS4 not recognized in iTunes After Replacing MacBook HD

Several days ago, after experiencing some problems w/ my MacBook, I took it to the Genius Bar at my local Apple store. After some diagnostic tests, it was determined that my hard drive was in the process of dying. A new, replacement hard drive was installed by the very helpful Genius. When I got home, I used Time Machine to restore the contents of my hard drive.
I am running OS10.6.4 on my MacBook, with the latest version (9.2?) of iTunes.
After restoring the contents of my hard drive, Time Machine would not back up my MacBook until i formatted the backup drive, and started backups with Time Machine all over again (so now, only one backup since the hard drive restore).
Now, when connecting my iPhone 3GS running iOS4.0.2, the connection confirmation noise sounds, my iPhone very briefly shows up in the devices list in iTunes, and then disappears. I tried disconnecting and then reconnecting my iPhone a few times to see if I could get iTunes to recognize my iPhone. No luck.
At some point after several unsuccessful attempts to get my iPhone to be recognized, I was presented with the message that iTunes could not recognize the iPhone, and I should click the restore button in iTunes. I did this. iTunes wanted to download some software, for the restoration. It looked like this was successful, but then my iPhone vanished from the devices list again. After disconnecting and reconnecting it, and then clicking restore in iTunes, a message that iTunes could not contact the Apple software downloads server. This was erroneous, since I did have a functioning internet connection at the time (I had several tabs open and running in Safari at the time).
Can anyone please help?!

Try these suggestions: iOS: Device not recognized in iTunes for MAC OS X, http://support.apple.com/kb/TS1591

Not seeing Airport Express after Leopard Upgrade

Just upgraded by macbook to leopard, and now it's not seeing my airport express base station. the card is working fine (sees and connects to other networks) and the base station itself is connected to the internet (iphone can access it). when i turn airport off then on, system preferences will show my network as connected briefly before disconnecting, and after that i can't connect to my network again. airport utility does not see the base station.

Perform a Factory Default Reset on the Express as follows:
Power off the Express
Wait a minute
Hold in the reset button first, and keep holding for an additional 10 seconds while you plug the Express back in to power
Release the reset button after the hold period
Allow a full minute for the Express to restart to a slow, blinking amber light
On the iMac running Leopard.....
Make sure that you have the wireless turned on at the top of the screen so your Mac is connected to the network
Open Macintosh HD > Applications > Utilities > AirPort Utility
When the Express appears in the window, click Continue
Enter a name for the Express and a device password, then click Continue
Select the option to Join your current network, then click Continue
Select the option for the Express to wirelessly join your network and click Continue
Click on the arrow in the drop down box and then select the name of your wireless network, or type in the name of your wireless network
Wireless Security = WPA/WPA2 Personal
Enter your wireless network password and verify, then click Continue
Click Update, then click Continue
Close AirPort Utility and wait a minute for the Express to restart. If your settings are correct, you will see a green light.
The Express is now set up

IPod not recognized in iTunes after update/restore

I was prompted by a message (don't remember the exact verbage) in iTunes to restore my iPod. It appeared to download and install an iPod update. Then when iTunes restarted, the iPod was no longer recognized by iTunes. The iPod still charges and iTunes still starts when it is plugged in but no devices are listed.
A connectivity test shows: iPod service is running, iTunes Helper is running, Apple Mobile Device is running. USB ports verified, FireWire (IEEE 1394) ports verified, iPod found. All tests passed.
The iPod is still visible in Windows but when I attempt to navigate into H:\iPod_Control\iTunes or H:\iPod_Control\Music I get the message: "(directory) is not accessible. The file or directory is corrupt and unreadable."
I have done the first 4 of the 5 R's; obviously not able to restore presently as the iPod is not recognized. I tried manually setting to disk mode- no luck. I tried uninstalling/reinstalling iTunes as well.
Any suggestions are greatly appreciated.
Message was edited by: Sgt Howie

Hi. I had the exact same problem that you identified. I came across a tip somewhere to delete the contents of the pictures folder. When that didn't work for me I figured I'd go for broke and format the darn thing. From windows explorer I right clicked on the ipod volume (for me it was J: drive) and format. After I unplugged and replugged the usb cord, iTunes recognized the ipod again.
Hope that helps.

Yet another problem; iPod not recognized in windows after uninstall

So I'm still trying to fix my faulty iPod and now, after Apple telling me to uninstall and re-install the USB software, it is not recognized, when I plug my iPod in it comes up "installing software" then asks for a disk, thing is I was not given a disk with my iPod and I don't think iPod touch uses a disk either anyway.
This is really irritating as I think I have a solution to my original problem and now it's doing this...
Any help ?

Thank you
I actually managed to fix it this way;
My laptop (Advent Roma) decided to freeze all USB ports so after restoring my laptop back to how it was on the 27th (Last week) I re-installed iTunes and put my iPod cable back in, it installed again but this time appeared in iTunes, it still won't restore but I'm glad it's recognized again

IPod shuffle does not recognized by iTunes after restore

Hello
I have a iPod shuffle (4th gen) and a windows laptop.
After restoring my iPod shuffle (as directed by iTunes), iTunes does not recognized my iPod anymore.
The data in the iPod has been deleted (ie return to the factory settings), but iTunes does not proceed to prompt me to name my iPod and set up sync options etc, it simply does nothing and does not recognize my iPod.
I went on My Computer, and reformatted the iPod shuffle again. As a result of the reformatting, iTunes recognizes my iPod but it requires me to restore my iPod back to factory settings again. It became a cycle of either recognizing the iPod but asking me to restore it; or does not recognize my iPod after restoration.
Please kindly assist me with this situation as it is rather frustrating.
iTunes is in the latest version as I have attempted the trouble shooting support on the webpage.
Many thanks.

Hi priscillayeung,
If you are having issues with your iPod being recognized by your Windows computer but not by iTunes (or being recognized but requiring a restore, which then causes it to not be recognized again), you may find the troubleshooting steps outlined in the following article helpful:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
Regards,
- Brenden

Itunes not recognizing my devices after installing 11.1.4

As per itunes message to update to latest version, I updated to 11.1.4 on my PC. I'm running windows 8.1, 64 bit. After updating and restarting computer, itunes will not recognize any of my devices. iphone4s, ipod touch 5g, ipod touch 4g. The devices "are" recognized on the computer when plugged in via usb. I guess this would indicate that the usb cables and the drivers are good.
All of my itunes libraries for the associated devices open up just fine. All of the contents are in tact. It's just that the device is not recognized in itunes when opened. Any suggestions would be much appeciated.

Windows 8.1, 64bit
It appears that the 64bit install messed up the device drivers for the Apple mobilie devices connecting as USB.
I tried many things, I may have missed a step below. But the following is what I believe was the fix - since it worked on a 2nd PC.
Make sure you are using an administrator account. Any of them on your machine will do for the following
a) Get Windows to restart the drivers:
    - disconnect your USB device and close ITunes
    - connect your USB device
    - if ITunes loads, close it.
b) File explorer:
Open File explorer and browse to
C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
In that folder there should be a set of files named "usbaapl64...."
right click on the one ending in "INF"
Select Install. It's very quick.
remove the USB device
c) Restart the computer.
When you login again, load ITunes before you attach your USB device.

Iphone not recognized in itunes after upgrade to snow leopard

after upgrading to snow leopard, iPhone not recognized in iTunes & does not show up.
Account OK in iTunes.
Any idea how to resume normal sync ?

Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538

Isight not recognized in Skype after 10.8.5 upgrade

Hi, yesterday after upgrading my macbook air 2013 to osx mountain lion 10.8.5 my isight webcam stopped working in skype, work ok with other programs likeas messages and photobooth. Today i've formatted the machine and make a fresh install, but same problem... any suggestions?
Thanks, Andrea

I found this in google: http://community.skype.com/t5/Mac/OS-X-10-8-5-Broke-Skype-Video/td-p/1891729/pag e/2
The Skype for Mac Engineer:
Hey all!
After some investigation, we have found that the OSX 10.8.5 update is missing a specific file that would allow some apps such as Skype or iMovie to access the built-in facetime camera on Mid-2013 MacBook Airs.
At this point, we are not sure how this can be fixed, and we'll get in touch with Apple to see how we can solve this.
From our tests, however, external webcams should work. It's not the best workaround, but until something gets fixed, that is the only known (and hopefuly temporary) solution.
For the more tech-savvy readers:
The 10.8.5 update updated a CoreMediaIO plugin that accesses the MBA camera, but didn't bundle the 32-bits version of it.
Other (older and newer) versions of the OS do include a universal version (32 and 64 bits), but not 10.8.5.
This means 32-bits apps such as Skype or iMovie cannot load the plugin, making the built-in facetime camera invisible to these them.
Thibault
Skype for Mac Engineer

Mac not recognizing AP Express after AP Extreme password change...

Similar Messages

Maybe you are looking for