Mac not sending signal to external monitor
Hi, I have a 2010 Macbook pro and I'm trying to use my acer monitor as an external for additional desktop space. I've done it before (about a year ago) and it worked perfectly fine, but for some reason when I plug in the cable (it's a DVI) it just lights up my monitor which says no signal, and the mac screen turns blue (as if it were going to readjust the screen for another monitor), but then it just goes back to the normal desktop. I can't move the mouse off screen and the monitor displays nothing. Any ideas?
Sorry I couldn't figure out how to edit the above, but I forgot to mention that after unplugging and plugging it in several times I actually got the monitor to work and display things and I dragged some stuff over to it, but there was a dialogue box about displays I couldn't close and when i clicked "detect monitors" it ended up shutting it down again and I haven't seen it work since.
Similar Messages
-
MacBook not sending signal to external display - was working fine before.
hi guys, i have a unibody macbook and i've been hooking it up to my tv for almost 2 years now using the mini display port to hdmi adapter and hdmi to my television.
tonight the macbook randomly stopped sending signals to the tv. i tried two tvs with two different display adapters as well as a DVI monitor.
the displays are detected in osx but there is just no signal sending to it. anyone have any ideas? did my mini display port just die? i've tried several cables/adapters.Hey,
I just experienced a similar problem as the original poster, except that I'm using a minidisplayport - DVI adapter and not HDMI. Been working fine on my external screen for 2 months now and suddenly the external says no signal?
Macbook still flashes a blue screen when plugging in the adapter but does not detect the external. Haven't ruled out that the adapter is busted yet, but worked fine earlier.
I tried resetting the PRAM without any change.
Any kind of software / hardware problems on the macbook?
Any thoughts? -
Mini Displayport to DVI Adapter not sending signal to DVI Monitor
I have a dell monitor connected to my Thunderbolt Display that will not get a signal. The component string looks like this
MBP - Thunderbolt Display- Mini Displayport to DVI adapter- Dell 22" DVI monitor.
I would like to use this monitor as a third monitor instead of collecting dust. Any help would be appreciated.
Thanks,Hello fuzzymelton,
The article linked below details a number of useful troubleshooting steps that may help get the additional monitor to function.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Allen -
New ENVY PC is not sending signal to second monitor. Need a fix.
Hi everyone, how do I get a second monitor to work on a new HP ENVY H8 1420T with Windows 8. As far as I can tell the PC recognizes the second monitor but no signal is received/sent at/to the second monitor. This model has two DVI ports, the second, I presume, both are for monitors. The second DVI connector requires an adapter for the VGA connector from the monitor.
Thanks for your helpHave you tested if there's a signal if you use only the second monitor at boot up?
And you don't have a additional graphics card installed, right?
*** Say 'Thanks' with Kudos *** -
My mac won't recognize an external monitor. The screen Goes Blue Once, then goes blue again and the second monitor just turns off. I am using an HDMI adapter to a visio TV. I also have my xbox on the tv. Can anyone Help??
Lol, figured out the first part. Just for those who may be searching, when you click on the Display Preferences, and click on the arraingment tab... it not only shows where your two screens will be displayed, but the WHITE BAR at the top of one screen is the dock/toolbar. Click and hold to grab this and just slide it over to the screen you'd like it to be on.
You have to release it IN the screen box, not on top of it... and it should pop right over to the new (or old) screen. At any rate, you can put the dock on either (or any) screen that you prefer.
I am thinking of ordering more of these. Lol. 3 monitor setup seems like it would be crazy good.
Still looking for the answer to keeping the new 16" screen on the right without switching between screen #s with that... not expose... Lion feature.
Thanks. Hope my other question has an answer out here.
Paul H -
HT1338 the Macbook Pro would not even detect the external monitor.
My Macbook pro will not connect to an external monitor after moving it. It has been running on this same monitor for 8 months. I switched to a new Desk last night, after hooking it up, the Macbook Pro would not even detect the external monitor. It was only showing the Macs monitor in Display. It did not even have where you could "Detect Display" available. Is there an update that I may have missed. I have tested all the Monitor connections with another laptop they all work.
finally I would like to know if my computer falls under
http://support.apple.com/kb/TS2377
If nothing displays but you hear normal startup sounds, then it's possible this is a video issue, and you should take it to an Apple store or AASP. -
Is there anyway to have an 11 inch mac air connected to an external monitor with lid closed and still be able to see content. I have a wireless ketboard and mouse and have tried everything. Only works when plugged in.
You are referring to a feature called Clamshell Mode, please read Clamshell Mode setup for instructions.
BTW when posting when you use generalities such as "have tried everything" this tells us nothing. When posting please be specific and try to paint a complete picture. It just makes things easier for those trying to help you. -
Not send mail for external domains
Hi,
I have installed OCS 10g(10.1.2) in linux. All components ok, but i not send mail for external domain.
Att,
MestiI remember in version 9.0.2 that i configure in SMTP_OUTBOUND the IP of DNS external to send mail for other domains.
Mesti -
am a brand new mac user...trying to figure out how to switch from the Mac Pro screen to my external monitor. Appreciate any help. thanks
In Finder... goto Help... In the Search Window type in Displays...
Lots of Useful Information there...
You may find these Links Useful too:
http://www.apple.com/support/mac101/
http://www.apple.com/support/macbookpro/
Cheers, -
Mac powerbook g4 15" Auminum, on startup has a black screen and no signal to external monitor
Powerbook G4 1.5 Ghz 15" Aluminum
After watching a dvd, I turned the laptop off and closed the lid before the screen was completely dark. I also forgot to take the dvd out. The next day I get a start up chime and a black screen. Will not work with external monitor. Will not let me do pram reset as I couldn't see the picture anyway. Hard drive appears to be fine. I tried swapping the two ram modules. Took the lower one out and still no results. My main question is, before I just geek out and put a new logic board in, what are the possible loose connection (cables) causes?This issue is not unfamiliar among PowerPC G4 users, in desktop or portable models.
The cause may vary and so when looking through incidents of a similar nature, try to
be patient and get past duplicate-sounding experiences as referenced by the sources.
There are more than a few in this search thread that sound like your situation:
https://www.google.com/?gws_rd=ssl#q=powerbook+g4+black+screen+on+startup
Depending on the PowerBook model, some have clock battery/capacitor on logic board
that once it fails, there can be startup issues as a result... So that's one to check. And
then there are the connections that may have come loose on the logic board, over years
of handling and small movement, these could finally have failed to contact finally. Or the
DC-in Board may have chosen to fail, so power may be unable to get past a circuit.
Troubleshooting based on a few symptoms can be... troublesome, tedious; or costly.
The iFixit.com guides have sections where people asked questions, such as:
https://www.ifixit.com/Answers/View/131619/PowerBook+g4+has+startup+chime+no+ima ge
The keyboard shortcuts to attempt to force a computer to start may be of no avail if
the hardware has defects, or if wires have come off their necessary junctions inside.
If you have time and some money, companies who specialize in repairing Apple
portable computers could restore its function & warranty their work. wegenermedia
is worth contacting if the computer is one you want to keep around while. They did
a repair for me on one of my Apple portables, and I'd probably go that route again.
So, anyway, if the unit uses a clock or PRAM battery, it may need replacement.
Or in another direction, issue could be a power related circuit failure; or worse.
There are graphic display components that fail at a point where an external &
internal display both won't light up. These are mapped out in iFixit guides or in
others online, depending on the model G4 PowerBook they show.
Good luck & happy computing! -
10.5.2 won't send signal to external projector
Help! I do speaking engagements for a living and just updated to 10.5.2. When I hook an external projector to the computer (DVI to VGA) my MacBook Pro does see the external projector, but will not send a signal to it. It worked yesterday, but as soon as I upgraded it no longer works. We tried a second Mac running 10.5.1 and it worked fine.
I have an engagement Wednesday evening and MUST have this fixed or I will be forced to buy a new computer. Don't have system disks to go backwards with updates. Anybody have any ideas? What a nightmare. I'm desperate to have a computer that will send a video signal out. It sees a monitor, but doesn't see the projector.Howdy chadnodoubt,
If you are having an issue with your external display not performing as expected when connected with your MacBook Pro, I would suggest that you troubleshoot using the steps in this article -
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
Mini Displayport to vga adapter on MacBook pro 13" late 2011. No signal on external monitor
Hi
Connecting a Late 2011 MacBook Pro 13" to an external monitor, trough mini Dispalyport to vga adapter, i see "no signal" messagge on external monitor, even if i get it as secondary monitor on Preferences > Monitor of my MacBook it's visible (i can change resolution, position, clone screen, ecc.).
Any suggestion? somebody found the same problem?Hi
i did what you said and tried with other resolution/refresh rate combinations, also with anoter external monitor (and vga cable) but its still the same: monitor is detected but there's no signal.
Now I will try to chek if the adapter works on other pc and monitor.
Thanks
(anyway it was the firs time i connect this mac to an external monitor) -
I use KDE and have a HP ProBook 6560b with a dock/port replicator. My problem is that signal to my external monitor doesn't automatically work on login rather it be via VGA or DVI (currently hooked up over DVI). I tinkered around with it and got it to work sometimes but not consistently.
Edit: This also seems to happen in Gnome using Gnome's display config tool.
That aside, my even bigger issue is when I click KRandRTray down in the system tray and change the display settings to what I want, my external monitor goes to sleep and says "no signal." The settings I want are for my laptop's attached LCD panel (LVDS1) to be "Disabled" (since I keep my laptop lid closed in the dock) and I want my externally attached monitor (HDMI2) to be set to 1680x1050 (Auto). The even stranger part of this is I can eventually get this to work if I start it dual monitor, pick my secondary external monitor (HDMI2) and set it's resolution to 1680x1050 (Auto), set primary display to HDMI2, hit apply then go back in and set LVDS1 to "Disabled" and hit apply again.
To add to this, if at any point in time the external monitor goes to "no signal" mode and the settings restore after the countdown, the external monitor will never show signal until I drop out to a console and killall X and it restarts KDM, etc.
I don't have any Xorg.conf (or config files in /etc/X11/xorg.conf.d) that relates to video settings.
The following is my graphics card that is integrated into my Core i5:
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Also, the xf86-video-intel version:
xf86-video-intel 2.15.0-2
This is the entire Xorg.0.log file up to the no signal situation on the external monitor:
[ 13.026]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[ 13.040] X Protocol Version 11, Revision 0
[ 13.040] Build Operating System: Linux 3.0-ARCH x86_64
[ 13.040] Current Operating System: Linux nathan-cbts 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 08:53:25 CEST 2011 x86_64
[ 13.040] Kernel command line: root=/dev/mapper/vgroot-lvroot ro i915.modeset=1
[ 13.040] Build Date: 17 September 2011 07:42:58AM
[ 13.040]
[ 13.040] Current version of pixman: 0.22.2
[ 13.040] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.040] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.040] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 5 09:06:26 2011
[ 13.074] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13.093] (==) No Layout section. Using the first Screen section.
[ 13.093] (==) No screen section available. Using defaults.
[ 13.093] (**) |-->Screen "Default Screen Section" (0)
[ 13.093] (**) | |-->Monitor "<default monitor>"
[ 13.093] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 13.093] (==) Automatically adding devices
[ 13.093] (==) Automatically enabling devices
[ 13.131] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 13.131] Entry deleted from font path.
[ 13.147] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 13.147] Entry deleted from font path.
[ 13.147] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 13.147] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 13.147] Entry deleted from font path.
[ 13.147] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 13.147] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 13.147] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.147] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 13.147] (II) Loader magic: 0x7d6160
[ 13.147] (II) Module ABI versions:
[ 13.147] X.Org ANSI C Emulation: 0.4
[ 13.147] X.Org Video Driver: 10.0
[ 13.147] X.Org XInput driver : 12.2
[ 13.147] X.Org Server Extension : 5.0
[ 13.148] (--) PCI:*(0:0:2:0) 8086:0116:103c:1619 rev 9, Mem @ 0xd4000000/4194304, 0xc0000000/268435456, I/O @ 0x00004000/64
[ 13.148] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 13.148] (II) LoadModule: "extmod"
[ 13.149] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 13.155] (II) Module extmod: vendor="X.Org Foundation"
[ 13.155] compiled for 1.10.4, module version = 1.0.0
[ 13.155] Module class: X.Org Server Extension
[ 13.155] ABI class: X.Org Server Extension, version 5.0
[ 13.155] (II) Loading extension MIT-SCREEN-SAVER
[ 13.155] (II) Loading extension XFree86-VidModeExtension
[ 13.155] (II) Loading extension XFree86-DGA
[ 13.155] (II) Loading extension DPMS
[ 13.155] (II) Loading extension XVideo
[ 13.155] (II) Loading extension XVideo-MotionCompensation
[ 13.155] (II) Loading extension X-Resource
[ 13.155] (II) LoadModule: "dbe"
[ 13.155] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 13.156] (II) Module dbe: vendor="X.Org Foundation"
[ 13.156] compiled for 1.10.4, module version = 1.0.0
[ 13.156] Module class: X.Org Server Extension
[ 13.156] ABI class: X.Org Server Extension, version 5.0
[ 13.156] (II) Loading extension DOUBLE-BUFFER
[ 13.156] (II) LoadModule: "glx"
[ 13.156] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.160] (II) Module glx: vendor="X.Org Foundation"
[ 13.160] compiled for 1.10.4, module version = 1.0.0
[ 13.160] ABI class: X.Org Server Extension, version 5.0
[ 13.160] (==) AIGLX enabled
[ 13.160] (II) Loading extension GLX
[ 13.160] (II) LoadModule: "record"
[ 13.161] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 13.161] (II) Module record: vendor="X.Org Foundation"
[ 13.161] compiled for 1.10.4, module version = 1.13.0
[ 13.161] Module class: X.Org Server Extension
[ 13.161] ABI class: X.Org Server Extension, version 5.0
[ 13.161] (II) Loading extension RECORD
[ 13.161] (II) LoadModule: "dri"
[ 13.161] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 13.172] (II) Module dri: vendor="X.Org Foundation"
[ 13.172] compiled for 1.10.4, module version = 1.0.0
[ 13.172] ABI class: X.Org Server Extension, version 5.0
[ 13.172] (II) Loading extension XFree86-DRI
[ 13.172] (II) LoadModule: "dri2"
[ 13.172] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 13.172] (II) Module dri2: vendor="X.Org Foundation"
[ 13.172] compiled for 1.10.4, module version = 1.2.0
[ 13.172] ABI class: X.Org Server Extension, version 5.0
[ 13.172] (II) Loading extension DRI2
[ 13.172] (==) Matched intel as autoconfigured driver 0
[ 13.172] (==) Matched vesa as autoconfigured driver 1
[ 13.172] (==) Matched fbdev as autoconfigured driver 2
[ 13.172] (==) Assigned the driver to the xf86ConfigLayout
[ 13.172] (II) LoadModule: "intel"
[ 13.177] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 13.187] (II) Module intel: vendor="X.Org Foundation"
[ 13.187] compiled for 1.10.2, module version = 2.15.0
[ 13.187] Module class: X.Org Video Driver
[ 13.187] ABI class: X.Org Video Driver, version 10.0
[ 13.187] (II) LoadModule: "vesa"
[ 13.187] (WW) Warning, couldn't open module vesa
[ 13.187] (II) UnloadModule: "vesa"
[ 13.187] (II) Unloading vesa
[ 13.187] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 13.187] (II) LoadModule: "fbdev"
[ 13.187] (WW) Warning, couldn't open module fbdev
[ 13.187] (II) UnloadModule: "fbdev"
[ 13.187] (II) Unloading fbdev
[ 13.187] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 13.187] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 13.187] (++) using VT number 7
[ 13.197] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 13.198] drmOpenDevice: node name is /dev/dri/card0
[ 13.198] drmOpenDevice: open result is 8, (OK)
[ 13.198] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 13.198] drmOpenDevice: node name is /dev/dri/card0
[ 13.198] drmOpenDevice: open result is 8, (OK)
[ 13.198] drmOpenByBusid: drmOpenMinor returns 8
[ 13.198] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 13.198] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 13.198] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 13.198] (==) intel(0): RGB weight 888
[ 13.198] (==) intel(0): Default visual is TrueColor
[ 13.198] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[ 13.198] (--) intel(0): Chipset: "Sandybridge Mobile (GT2)"
[ 13.198] (**) intel(0): Relaxed fencing enabled
[ 13.198] (**) intel(0): Framebuffer tiled
[ 13.198] (**) intel(0): Pixmaps tiled
[ 13.198] (**) intel(0): 3D buffers tiled
[ 13.198] (**) intel(0): SwapBuffers wait enabled
[ 13.198] (==) intel(0): video overlay key set to 0x101fe
[ 13.208] (II) intel(0): Output LVDS1 has no monitor section
[ 13.208] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 13.208] (II) intel(0): Output VGA1 has no monitor section
[ 13.231] (II) intel(0): Output HDMI1 has no monitor section
[ 13.270] (II) intel(0): Output DP1 has no monitor section
[ 13.395] (II) intel(0): Output HDMI2 has no monitor section
[ 13.418] (II) intel(0): Output HDMI3 has no monitor section
[ 13.456] (II) intel(0): Output DP2 has no monitor section
[ 13.496] (II) intel(0): Output DP3 has no monitor section
[ 13.496] (II) intel(0): EDID for output LVDS1
[ 13.496] (II) intel(0): Manufacturer: SEC Model: 4351 Serial#: 0
[ 13.496] (II) intel(0): Year: 2008 Week: 0
[ 13.496] (II) intel(0): EDID Version: 1.3
[ 13.496] (II) intel(0): Digital Display Input
[ 13.496] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 13.496] (II) intel(0): Gamma: 2.20
[ 13.496] (II) intel(0): No DPMS capabilities specified
[ 13.496] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 13.496] (II) intel(0): First detailed timing is preferred mode
[ 13.496] (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 13.496] (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 13.496] (II) intel(0): Manufacturer's mask: 0
[ 13.497] (II) intel(0): Supported detailed timing:
[ 13.497] (II) intel(0): clock: 69.3 MHz Image Size: 344 x 194 mm
[ 13.497] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1480 h_border: 0
[ 13.497] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
[ 13.497] (II) intel(0): Unknown vendor-specific block f
[ 13.497] (II) intel(0): SAMSUNG
[ 13.497] (II) intel(0): 156AT05-307
[ 13.497] (II) intel(0): EDID (in hex):
[ 13.497] (II) intel(0): 00ffffffffffff004ca3514300000000
[ 13.497] (II) intel(0): 00120103802213780a87f594574f8c27
[ 13.497] (II) intel(0): 27505400000001010101010101010101
[ 13.497] (II) intel(0): 010101010101121b567250000c303020
[ 13.497] (II) intel(0): 250058c2100000190000000f00000000
[ 13.497] (II) intel(0): 00000000001eb4027400000000fe0053
[ 13.497] (II) intel(0): 414d53554e470a2020202020000000fe
[ 13.497] (II) intel(0): 00313536415430352d3330370a200017
[ 13.497] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 13.497] (II) intel(0): Printing DDC gathered Modelines:
[ 13.497] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 13.497] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 13.497] (II) intel(0): Printing probed modes for output LVDS1
[ 13.497] (II) intel(0): Modeline "1366x768"x60.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 13.497] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 13.497] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 13.497] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 13.497] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 13.497] (II) intel(0): EDID for output VGA1
[ 13.521] (II) intel(0): EDID for output HDMI1
[ 13.560] (II) intel(0): EDID for output DP1
[ 13.685] (II) intel(0): EDID for output HDMI2
[ 13.685] (II) intel(0): Manufacturer: HWP Model: 2848 Serial#: 16843009
[ 13.685] (II) intel(0): Year: 2011 Week: 24
[ 13.685] (II) intel(0): EDID Version: 1.3
[ 13.685] (II) intel(0): Digital Display Input
[ 13.685] (II) intel(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 13.685] (II) intel(0): Gamma: 2.20
[ 13.685] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 13.685] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 13.685] (II) intel(0): Default color space is primary color space
[ 13.685] (II) intel(0): First detailed timing is preferred mode
[ 13.685] (II) intel(0): redX: 0.641 redY: 0.335 greenX: 0.298 greenY: 0.611
[ 13.685] (II) intel(0): blueX: 0.147 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 13.685] (II) intel(0): Supported established timings:
[ 13.685] (II) intel(0): 720x400@70Hz
[ 13.685] (II) intel(0): 640x480@60Hz
[ 13.685] (II) intel(0): 800x600@60Hz
[ 13.685] (II) intel(0): 1024x768@60Hz
[ 13.685] (II) intel(0): Manufacturer's mask: 0
[ 13.685] (II) intel(0): Supported standard timings:
[ 13.685] (II) intel(0): #0: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 13.685] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 13.685] (II) intel(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 13.685] (II) intel(0): #3: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 13.685] (II) intel(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 13.685] (II) intel(0): Supported detailed timing:
[ 13.685] (II) intel(0): clock: 146.2 MHz Image Size: 473 x 296 mm
[ 13.685] (II) intel(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 13.685] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 13.685] (II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 83 kHz, PixClock max 175 MHz
[ 13.685] (II) intel(0): Monitor name: LA2205
[ 13.685] (II) intel(0): Serial No: 3CQ124N20C
[ 13.685] (II) intel(0): EDID (in hex):
[ 13.685] (II) intel(0): 00ffffffffffff0022f0482801010101
[ 13.685] (II) intel(0): 18150103802f1e78ee36c5a4554c9c25
[ 13.685] (II) intel(0): 125054a10800814081809500a940b300
[ 13.685] (II) intel(0): 01010101010121399030621a274068b0
[ 13.685] (II) intel(0): 3600d9281100001c000000fd00324c18
[ 13.685] (II) intel(0): 5311000a202020202020000000fc004c
[ 13.685] (II) intel(0): 41323230350a202020202020000000ff
[ 13.685] (II) intel(0): 003343513132344e3230430a202000d3
[ 13.685] (II) intel(0): Printing probed modes for output HDMI2
[ 13.685] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 13.685] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 13.685] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 13.685] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 13.685] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 13.685] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 13.685] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 13.685] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 13.685] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 13.709] (II) intel(0): EDID for output HDMI3
[ 13.746] (II) intel(0): EDID for output DP2
[ 13.786] (II) intel(0): EDID for output DP3
[ 13.786] (II) intel(0): Output LVDS1 connected
[ 13.786] (II) intel(0): Output VGA1 disconnected
[ 13.786] (II) intel(0): Output HDMI1 disconnected
[ 13.786] (II) intel(0): Output DP1 disconnected
[ 13.786] (II) intel(0): Output HDMI2 connected
[ 13.786] (II) intel(0): Output HDMI3 disconnected
[ 13.786] (II) intel(0): Output DP2 disconnected
[ 13.786] (II) intel(0): Output DP3 disconnected
[ 13.786] (II) intel(0): Using fuzzy aspect match for initial modes
[ 13.786] (II) intel(0): Output LVDS1 using initial mode 1024x768
[ 13.786] (II) intel(0): Output HDMI2 using initial mode 1024x768
[ 13.786] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 13.786] (II) intel(0): Kernel page flipping support detected, enabling
[ 13.786] (**) intel(0): Display dimensions: (340, 190) mm
[ 13.786] (**) intel(0): DPI set to (76, 102)
[ 13.786] (II) Loading sub module "fb"
[ 13.786] (II) LoadModule: "fb"
[ 13.787] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 13.802] (II) Module fb: vendor="X.Org Foundation"
[ 13.802] compiled for 1.10.4, module version = 1.0.0
[ 13.802] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.802] (II) Loading sub module "dri2"
[ 13.802] (II) LoadModule: "dri2"
[ 13.802] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 13.802] (II) Module dri2: vendor="X.Org Foundation"
[ 13.802] compiled for 1.10.4, module version = 1.2.0
[ 13.802] ABI class: X.Org Server Extension, version 5.0
[ 13.802] (==) Depth 24 pixmap format is 32 bpp
[ 13.802] (II) intel(0): [DRI2] Setup complete
[ 13.802] (II) intel(0): [DRI2] DRI driver: i965
[ 13.802] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 13.805] (II) UXA(0): Driver registered support for the following operations:
[ 13.805] (II) solid
[ 13.805] (II) copy
[ 13.805] (II) composite (RENDER acceleration)
[ 13.805] (II) put_image
[ 13.805] (II) get_image
[ 13.805] (==) intel(0): Backing store disabled
[ 13.805] (==) intel(0): Silken mouse enabled
[ 13.805] (II) intel(0): Initializing HW Cursor
[ 14.399] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 14.400] (==) intel(0): DPMS enabled
[ 14.400] (==) intel(0): Intel XvMC decoder enabled
[ 14.400] (II) intel(0): Set up textured video
[ 14.400] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 14.400] (II) intel(0): direct rendering: DRI2 Enabled
[ 14.400] (==) intel(0): hotplug detection: "enabled"
[ 14.400] (--) RandR disabled
[ 14.400] (II) Initializing built-in extension Generic Event Extension
[ 14.400] (II) Initializing built-in extension SHAPE
[ 14.400] (II) Initializing built-in extension MIT-SHM
[ 14.400] (II) Initializing built-in extension XInputExtension
[ 14.400] (II) Initializing built-in extension XTEST
[ 14.400] (II) Initializing built-in extension BIG-REQUESTS
[ 14.400] (II) Initializing built-in extension SYNC
[ 14.400] (II) Initializing built-in extension XKEYBOARD
[ 14.400] (II) Initializing built-in extension XC-MISC
[ 14.400] (II) Initializing built-in extension SECURITY
[ 14.400] (II) Initializing built-in extension XINERAMA
[ 14.400] (II) Initializing built-in extension XFIXES
[ 14.400] (II) Initializing built-in extension RENDER
[ 14.400] (II) Initializing built-in extension RANDR
[ 14.400] (II) Initializing built-in extension COMPOSITE
[ 14.400] (II) Initializing built-in extension DAMAGE
[ 14.498] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 14.498] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 14.498] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 14.498] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 14.498] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 14.498] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
[ 14.498] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 14.498] (II) intel(0): Setting screen physical size to 270 x 203
[ 14.799] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 14.799] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.799] (II) LoadModule: "evdev"
[ 14.800] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.811] (II) Module evdev: vendor="X.Org Foundation"
[ 14.811] compiled for 1.10.0, module version = 2.6.0
[ 14.811] Module class: X.Org XInput Driver
[ 14.811] ABI class: X.Org XInput driver, version 12.2
[ 14.811] (II) Using input driver 'evdev' for 'Power Button'
[ 14.811] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.811] (**) Power Button: always reports core events
[ 14.811] (**) Power Button: Device: "/dev/input/event3"
[ 14.811] (--) Power Button: Found keys
[ 14.811] (II) Power Button: Configuring as keyboard
[ 14.811] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 14.811] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 14.811] (**) Option "xkb_rules" "evdev"
[ 14.811] (**) Option "xkb_model" "evdev"
[ 14.811] (**) Option "xkb_layout" "us"
[ 14.829] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 14.829] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 14.829] (II) Using input driver 'evdev' for 'Video Bus'
[ 14.829] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.829] (**) Video Bus: always reports core events
[ 14.829] (**) Video Bus: Device: "/dev/input/event4"
[ 14.829] (--) Video Bus: Found keys
[ 14.829] (II) Video Bus: Configuring as keyboard
[ 14.829] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
[ 14.829] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 14.829] (**) Option "xkb_rules" "evdev"
[ 14.829] (**) Option "xkb_model" "evdev"
[ 14.829] (**) Option "xkb_layout" "us"
[ 14.832] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 14.832] (II) No input driver/identifier specified (ignoring)
[ 14.833] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 14.833] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 14.833] (II) Using input driver 'evdev' for 'Sleep Button'
[ 14.833] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.833] (**) Sleep Button: always reports core events
[ 14.833] (**) Sleep Button: Device: "/dev/input/event1"
[ 14.833] (--) Sleep Button: Found keys
[ 14.833] (II) Sleep Button: Configuring as keyboard
[ 14.833] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 14.833] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 14.833] (**) Option "xkb_rules" "evdev"
[ 14.833] (**) Option "xkb_model" "evdev"
[ 14.833] (**) Option "xkb_layout" "us"
[ 14.835] (II) config/udev: Adding input device CHICONY HP Basic USB Keyboard (/dev/input/event5)
[ 14.835] (**) CHICONY HP Basic USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.835] (II) Using input driver 'evdev' for 'CHICONY HP Basic USB Keyboard'
[ 14.835] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.835] (**) CHICONY HP Basic USB Keyboard: always reports core events
[ 14.835] (**) CHICONY HP Basic USB Keyboard: Device: "/dev/input/event5"
[ 14.835] (--) CHICONY HP Basic USB Keyboard: Found keys
[ 14.835] (II) CHICONY HP Basic USB Keyboard: Configuring as keyboard
[ 14.835] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3.1/1-1.4.3.1:1.0/input/input5/event5"
[ 14.835] (II) XINPUT: Adding extended input device "CHICONY HP Basic USB Keyboard" (type: KEYBOARD)
[ 14.835] (**) Option "xkb_rules" "evdev"
[ 14.835] (**) Option "xkb_model" "evdev"
[ 14.835] (**) Option "xkb_layout" "us"
[ 14.836] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event6)
[ 14.836] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 14.836] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 14.836] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.836] (**) Logitech USB Optical Mouse: always reports core events
[ 14.836] (**) Logitech USB Optical Mouse: Device: "/dev/input/event6"
[ 14.836] (--) Logitech USB Optical Mouse: Found 3 mouse buttons
[ 14.836] (--) Logitech USB Optical Mouse: Found scroll wheel(s)
[ 14.836] (--) Logitech USB Optical Mouse: Found relative axes
[ 14.836] (--) Logitech USB Optical Mouse: Found x and y relative axes
[ 14.836] (II) Logitech USB Optical Mouse: Configuring as mouse
[ 14.836] (II) Logitech USB Optical Mouse: Adding scrollwheel support
[ 14.836] (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 14.836] (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.836] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3.2/1-1.4.3.2:1.0/input/input6/event6"
[ 14.836] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
[ 14.836] (II) Logitech USB Optical Mouse: initialized for relative axes.
[ 14.836] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 14.836] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 14.836] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 14.836] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 14.837] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 14.837] (II) No input driver/identifier specified (ignoring)
[ 14.837] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 14.837] (II) No input driver/identifier specified (ignoring)
[ 14.837] (II) config/udev: Adding input device HDA Intel PCH Line In at Sep Rear Jack (/dev/input/event13)
[ 14.837] (II) No input driver/identifier specified (ignoring)
[ 14.838] (II) config/udev: Adding input device HDA Intel PCH Mic at Ext Right Jack (/dev/input/event14)
[ 14.838] (II) No input driver/identifier specified (ignoring)
[ 14.838] (II) config/udev: Adding input device HDA Intel PCH Line Out at Sep Rear Jack (/dev/input/event15)
[ 14.838] (II) No input driver/identifier specified (ignoring)
[ 14.838] (II) config/udev: Adding input device HDA Intel PCH HP Out at Ext Right Jack (/dev/input/event16)
[ 14.838] (II) No input driver/identifier specified (ignoring)
[ 14.838] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP (/dev/input/event17)
[ 14.838] (II) No input driver/identifier specified (ignoring)
[ 14.838] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP (/dev/input/event18)
[ 14.838] (II) No input driver/identifier specified (ignoring)
[ 14.839] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP (/dev/input/event19)
[ 14.839] (II) No input driver/identifier specified (ignoring)
[ 14.840] (II) config/udev: Adding input device HP HD Webcam [Fixed] (/dev/input/event10)
[ 14.840] (**) HP HD Webcam [Fixed]: Applying InputClass "evdev keyboard catchall"
[ 14.840] (II) Using input driver 'evdev' for 'HP HD Webcam [Fixed]'
[ 14.840] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.840] (**) HP HD Webcam [Fixed]: always reports core events
[ 14.840] (**) HP HD Webcam [Fixed]: Device: "/dev/input/event10"
[ 14.840] (--) HP HD Webcam [Fixed]: Found keys
[ 14.840] (II) HP HD Webcam [Fixed]: Configuring as keyboard
[ 14.840] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input10/event10"
[ 14.840] (II) XINPUT: Adding extended input device "HP HD Webcam [Fixed]" (type: KEYBOARD)
[ 14.840] (**) Option "xkb_rules" "evdev"
[ 14.840] (**) Option "xkb_model" "evdev"
[ 14.840] (**) Option "xkb_layout" "us"
[ 14.843] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 14.843] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.843] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 14.843] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.843] (**) AT Translated Set 2 keyboard: always reports core events
[ 14.843] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 14.843] (--) AT Translated Set 2 keyboard: Found keys
[ 14.843] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 14.843] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 14.843] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 14.843] (**) Option "xkb_rules" "evdev"
[ 14.843] (**) Option "xkb_model" "evdev"
[ 14.843] (**) Option "xkb_layout" "us"
[ 14.843] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 14.843] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 14.843] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 14.843] (II) LoadModule: "synaptics"
[ 14.843] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 14.850] (II) Module synaptics: vendor="X.Org Foundation"
[ 14.850] compiled for 1.10.2, module version = 1.4.1
[ 14.850] Module class: X.Org XInput Driver
[ 14.850] ABI class: X.Org XInput driver, version 12.2
[ 14.850] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 14.850] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 14.850] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 14.850] (**) Option "Device" "/dev/input/event11"
[ 14.970] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5690
[ 14.970] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4854
[ 14.970] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 14.970] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 14.970] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 14.970] (**) Option "TapButton1" "1"
[ 14.970] (**) Option "TapButton2" "2"
[ 14.970] (**) Option "TapButton3" "3"
[ 15.076] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 15.076] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 15.183] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input11/event11"
[ 15.183] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 15.183] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 15.183] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 15.183] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[ 15.183] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 15.183] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 15.183] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 15.183] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 15.183] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 15.183] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 15.183] (II) No input driver/identifier specified (ignoring)
[ 15.184] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event7)
[ 15.184] (II) No input driver/identifier specified (ignoring)
[ 15.184] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 15.184] (II) No input driver/identifier specified (ignoring)
[ 15.184] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 15.184] (II) No input driver/identifier specified (ignoring)
[ 15.186] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
[ 15.186] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 15.186] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 15.186] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.186] (**) HP WMI hotkeys: always reports core events
[ 15.186] (**) HP WMI hotkeys: Device: "/dev/input/event9"
[ 15.186] (--) HP WMI hotkeys: Found keys
[ 15.186] (II) HP WMI hotkeys: Configuring as keyboard
[ 15.186] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
[ 15.186] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD)
[ 15.186] (**) Option "xkb_rules" "evdev"
[ 15.186] (**) Option "xkb_model" "evdev"
[ 15.186] (**) Option "xkb_layout" "us"
[ 39.891] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 39.891] (II) intel(0): Printing DDC gathered Modelines:
[ 39.891] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 52.300] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 52.300] (II) intel(0): Printing DDC gathered Modelines:
[ 52.300] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 52.625] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 52.625] (II) intel(0): Printing DDC gathered Modelines:
[ 52.625] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 54.852] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 54.852] (II) intel(0): Printing DDC gathered Modelines:
[ 54.861] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 70.112] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 70.113] (II) intel(0): Printing DDC gathered Modelines:
[ 70.113] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 72.893] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 72.893] (II) intel(0): Printing DDC gathered Modelines:
[ 72.893] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 82.662] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 82.662] (II) intel(0): Printing DDC gathered Modelines:
[ 82.662] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 82.951] (II) intel(0): Allocated new frame buffer 1088x770 stride 4608, tiled
[ 83.011] (II) intel(0): Allocated new frame buffer 1728x1052 stride 7168, tiled
[ 83.497] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 83.497] (II) intel(0): Using hsync ranges from config file
[ 83.497] (II) intel(0): Using vrefresh ranges from config file
[ 83.497] (II) intel(0): Printing DDC gathered Modelines:
[ 83.497] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 83.497] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 83.497] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 83.497] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 83.497] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 83.497] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 83.497] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 83.497] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 83.498] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 83.498] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 83.787] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 83.787] (II) intel(0): Using hsync ranges from config file
[ 83.787] (II) intel(0): Using vrefresh ranges from config file
[ 83.787] (II) intel(0): Printing DDC gathered Modelines:
[ 83.787] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 83.787] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 83.787] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 83.787] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 83.787] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 83.787] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 83.787] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 83.787] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 83.788] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 83.788] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 84.094] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 84.094] (II) intel(0): Using hsync ranges from config file
[ 84.094] (II) intel(0): Using vrefresh ranges from config file
[ 84.094] (II) intel(0): Printing DDC gathered Modelines:
[ 84.094] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 84.094] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 84.094] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 84.094] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 84.094] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 84.094] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 84.094] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 84.094] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 84.094] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 84.094] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 84.219] (II) intel(0): Allocated new frame buffer 1728x1050 stride 7168, tiled
[ 84.276] (EE) intel(0): failed to set mode: Invalid argument
[ 84.467] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 84.467] (II) intel(0): Using hsync ranges from config file
[ 84.467] (II) intel(0): Using vrefresh ranges from config file
[ 84.467] (II) intel(0): Printing DDC gathered Modelines:
[ 84.467] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 84.467] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 84.467] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 84.467] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 84.467] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 84.467] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 84.467] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 84.467] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 84.467] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 84.467] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 84.807] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 84.807] (II) intel(0): Using hsync ranges from config file
[ 84.807] (II) intel(0): Using vrefresh ranges from config file
[ 84.807] (II) intel(0): Printing DDC gathered Modelines:
[ 84.807] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 84.807] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 84.807] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 84.807] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 84.807] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 84.807] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 84.807] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 84.807] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 84.808] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 84.808] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 85.104] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 85.104] (II) intel(0): Using hsync ranges from config file
[ 85.104] (II) intel(0): Using vrefresh ranges from config file
[ 85.104] (II) intel(0): Printing DDC gathered Modelines:
[ 85.104] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 85.104] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 85.104] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 85.104] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 85.104] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 85.104] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 85.104] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 85.104] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 85.104] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 85.104] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 85.447] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 85.447] (II) intel(0): Using hsync ranges from config file
[ 85.447] (II) intel(0): Using vrefresh ranges from config file
[ 85.447] (II) intel(0): Printing DDC gathered Modelines:
[ 85.447] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 85.447] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 85.447] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 85.447] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 85.447] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 85.447] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 85.447] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 85.447] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 85.447] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 85.447] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 85.791] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 85.791] (II) intel(0): Using hsync ranges from config file
[ 85.791] (II) intel(0): Using vrefresh ranges from config file
[ 85.791] (II) intel(0): Printing DDC gathered Modelines:
[ 85.791] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 85.791] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 85.791] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 85.791] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 85.791] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 85.791] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 85.791] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 85.791] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 85.791] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 85.791] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 86.169] (WW) intel(0): flip queue failed: Device or resource busy
[ 86.169] (WW) intel(0): Page flip failed: Device or resource busy
[ 86.313] (WW) intel(0): flip queue failed: Device or resource busy
[ 86.313] (WW) intel(0): Page flip failed: Device or resource busy
[ 100.047] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 100.047] (II) intel(0): Using hsync ranges from config file
[ 100.047] (II) intel(0): Using vrefresh ranges from config file
[ 100.047] (II) intel(0): Printing DDC gathered Modelines:
[ 100.047] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 100.047] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 100.047] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 100.047] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 100.047] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 100.047] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 100.047] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 100.047] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 100.047] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 100.047] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 100.156] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 100.156] (II) intel(0): Printing DDC gathered Modelines:
[ 100.156] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 100.464] (WW) intel(0): flip queue failed: Device or resource busy
[ 100.464] (WW) intel(0): Page flip failed: Device or resource busy
[ 100.472] (II) intel(0): Allocated new frame buffer 1728x1050 stride 7168, tiled
[ 100.790] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 100.790] (II) intel(0): Printing DDC gathered Modelines:
[ 100.790] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 101.081] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 101.081] (II) intel(0): Printing DDC gathered Modelines:
[ 101.081] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 101.435] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 101.435] (II) intel(0): Printing DDC gathered Modelines:
[ 101.435] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 190.516] (II) AIGLX: Suspending AIGLX clients for VT switch
Since this is a multi-part problem I guess my initial task is to understand why going directly to disabling the laptop's LCD and setting my external monitor to 1680x1050 (Auto) doesn't work without going through the other steps.
Last edited by nnelson123 (2011-10-05 13:48:19)[ 13.093] (==) No Layout section. Using the first Screen section.
[ 13.093] (==) No screen section available. Using defaults.
[ 13.093] (**) |-->Screen "Default Screen Section" (0)
[ 13.093] (**) | |-->Monitor "<default monitor>"
[ 13.093] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
First step would be to create the necessary entries (easier to make a complete xorg.conf versus xorg.conf.d/##-whatever.conf).
All Desktop Environments / Window Managers rely on X. Man pages are helpful, possibly some headaches ahead as I fought a dual-monitor display this way.
I currently run a xrandr script to switch displays on my hp pavilion: https://wiki.archlinux.org/index.php/Xrandr#Scripts
Check it out. -
Resolution 1920x1080 not available for an external monitor
Hi,
I've just bought a Tv Lcd + Monitor 24 Samsung P2470hn, I have a DisplayPort to DVI adapter and a DVI to HDMI cable to the monitor. But when a I go to System Preferences -> Displays, I only have resolutions up to 1600x900. The monitor supports 1920x1080 but it isn't available. What I'm doing wrong? Could it be the DVI to HDMI cable? The monitor has a DVI input.
One weird thing is that when I go to System Profiler -> Graphics/Displays I see that the external monitor has this
SyncMaster:
Resolution: 1600 x 900 @ 60 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
Television: Yes
Note the last item "Television: Yes" could be that the problem? if so how can I change it?
Thanks
GabrielI find it very annoying that I have to use MiniDisplay Port to VGA to get 1366x768 or 1920x1080 resolution options in the Display Control Pane. If I use MiniDisplay Port to HDMI, I get some old common resolutions, (some weird ones too like 1344x1024) as well as 720p, 1080i, and 1080p. 1080p would be great, except this is more of a "TV" video input rather than a "PC" monitor input, I either get overscan or underscan (depending on the "Overscan" check box).
Why, especially since it's all digital with HDMI, doesn't Apple include nice 1:1 Pixel mapping using HDMI? It's very frustrating! I've noticed some, (generally more expensive HDTVs, like my 63" Samsung Plasma), HDTVs will do "Just Scan" (as opposed to "OverScan" or "UnderScan") then the 1080p with HDMI works beautifully.
All of my VIZIO TVs, I have to use the VGA to get 1:1 Pixel mapping. At least, with a high quality VGA cable (even my 25 foot one from MonoPrice.com that would cost 10 times more at a local store) does convert back to digital (for LCD panel) without noticeable noise and pixel shifting (or ghosting, which I've seen with cheap VGA cables, weird, seeing analog distortions on a digital LCD display, but hey, bad analog in -bad analog looking image out). Plus, unless you have the newest Macs with audio supported through the MiniDisplay Port, you can only get the TV speakers to work with the "PC" VGA input and the "PC" audio input (3.5mm stereo phono jack) next to it. With an HDMI input, the TV will look for audio in the HDMI source and not from the "PC" audio input. -
"No signal" on external monitor
have toshiba tecra a11-11q. after hotplugging external monitor through vga, i have no signal message on that screen. xrandr:
Screen 0: minimum 320 x 200, current 2646 x 1024, maximum 8192 x 8192
VGA1 connected 1280x1024+1366+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.0*+ 75.0
1280x960 75.0
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1366x768 60.2*+
1024x768 85.0 75.0 70.1 60.0
832x624 74.6
800x600 85.1 72.2 75.0 60.3 56.2
640x480 85.0 72.8 75.0 59.9
720x400 85.0
640x400 85.1
640x350 85.1
here everything seems to be fine. krandrtray also shows that external monitor is operative.
after rebooting computer both monitors work, but i can't change brightness on lvds.
i'm running archlinux, but the same results were on fedora, ubuntu and mint. there is no such problem on windows xp.
maybe it is not supported yet for Core Processor Integrated Graphics, but i couldn't find such information.same results:
Screen 0: minimum 320 x 200, current 1366 x 1024, maximum 8192 x 8192
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1366x768 60.2*+
1024x768 85.0 75.0 70.1 60.0
1024x768i 43.5
832x624 74.6
800x600 85.1 72.2 75.0 60.3 56.2
640x480 85.0 72.8 75.0 59.9
720x400 85.0
640x400 85.1
640x350 85.1
VGA1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 301mm
1280x1024 60.0*+ 75.0 72.0
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3
640x480 72.8 75.0 66.7 60.0
720x400 70.1
640x350 70.1
external monitor becomes a copy of LVDS1(according to xrandr) but monitor's screen is still black.
Maybe you are looking for
-
Sequence created in anon PL/SQL missing initial value
If I create a sequence in an anonymous PL/SQL block, with execute immediate, then perform a select nextval from that sequence outside the block, it misses it's initial value. Easily reproducable here: create table tab_a ( col_a number(4) not null );
-
Icound gives you 5GB storage witch is great for one device. However when you link multipol devices to the same account the 5GB is not enough. I feel Icloud want me to set up multipol clouds making management difficult of my products. Where is the in
-
"Device Error" Code:3, Note: AS_Storage Error=-97060
After installing my new internal blue-ray drive (MCE Technologies) into my Mac Pro Tower, I attempted to burn my first Blue-ray and this error popped up. Not sure why. Can anyone help me? Thanks!
-
RE: Additional scripts to execute after creation of database for Oracle
Hi it is possilble to execute additional scripts such as CATALOG.SQL; CATAUDIT.SQL etc to enable v$session views? as these views are not created when i used the wizard in Oracle to create the database in 9i. Is this normal or am i not creating the da
-
LSMW Standard Batch Input Program
Hi, I have one requirement on creating BOM. I have to upload data from legacy system to SAP for T-Code ' CS01' I have to use the Standard Batch input Program 'RCSBI010'. I have source structure and Target Structure. In Source structure i have Header