Mac Office not working after migration

I just migrated my applications and other items from my old PowerBook G4 running Tiger onto my new MacBook Pro. I was able to open all the applications for Mac Office on my new MacBook Pro but for some reason I cannot open the same applications on my old PowerBook anymore. It is telling me the same user is using the applications and I need to review the licensing agreement. Can I open the applications again on my old Powerbook?

dwb wrote:
Office can easily be copied from one computer to another and run. I'm guessing that you are trying to run Office on both computers at the same time. Office applications broadcast their serial number and name on the network so that if Word is running on one computer and you try to launch a copy of Word on another computer, if it has the same serial number it will fail to launch with an error message indicating a copy is already running.
The last time I used Office on my PCs, MS allowed two legal installs - one on a desktop and one on a notebook. I actually called them to confirm this. Things may have changed, and the PC and Mac worlds are far apart which may explain things. MS has become very strict as of late, regarding the use/misuse of their licenses, even to the point of doing online checking of systems for legality.

Similar Messages

"Find Form" calendar is not working after migration

Hi,
We have migrated from Oracle 9i to 10g.we have one form ''FormA" and "find form" for that FormA.Calendar functionality is present in both FormA and "Find FormA".if we try to use calendar functionality in "Find formA",its giving error like FRM-40104 - No such block calendar,FRM-40105(unable to resolve reference to item claendar.cell1.........),FRM-41045 (cannot find item - invalid id).Actually this scenario is not working after migrating the FORMS application to 'OAS10.1.2' from 'OAS904' .
In 'OAS904' ,The calendar item is present in the 'FormA' form, the 'calendar.show' hides the "Find FormA" and appears in the FOrmA and uses FormA's calendar item and after selecting the date,the date s applied to the "Find FormA"
But after migration, the "Find FormA" is not hiding, so its not able to retrieve the calendar properties.Because the calendar is present in "FormA".
Any problem with pll files like 'qmslib65','qmsolb65',qmsevh65'??
please help me by providing suggestions.
Thanks

qmslib65','qmsolb65',qmsevh65Are these libraries self-written or from some third-party tool?

Email account and Internet service not working after migration onto a new (upgraded 3rd party) 2012 MBP. Hardware or software issue.

I just purchased a refurb Mac Book Pro from the Apple on-line store. When I received the machine (serial number) I purchased 3rd party (OWC) parts. All of these were installed by the authorized, local Apple repair store I have had excellant results with past issues with my 2006 MBP. The parts installed are: 16 meg ram, 240 SSD and a 1 T installed replacing the optical drive.
Feeling ready now, I had the Apple store do the migration from my 2006 MacBook Pro (OS 10.6.8) over to the 2012.
When trying to get the new machine into the production flow, I cannot get email to work. It will launch but I cannot access accounts.
During the One to One, then moved over to the Genius Bar appointment, they reentered the account(s) data. Nothing.
Also at this time they noticed that the Internet connection was not working.
A new internet account was set up and it worked. They (Genius) launched email and the Internet connection crashed. This was repeated about 5 times.
The computer was left with Apple to reinstall the OS (10.8) - their best suggestion as a fix and I have now had a call to say that the install did not correct the problem. Now they are questioning the install of the 3rd party parts as the possible problem.
I'm to go back into the Apple store to discuss the next steps.
I would really, really appreciate anyones thoughts / suggestions on this problem. Is it software or hardware? Should I re-install the original ram and 500 m hard drive to start over with the migration? I'll be honest here and state - I'm not a technician in computers or this side of technology. That is why I have reliable parties do the install and trouble shoot. Not a comfortable feeling being at their mercy.
Advanced thanks to all who believe they have answers.

Back from the Apple store with my 2012 MacBook Pro.
After one re-install of the OS - no better - a clean install was performed - purging all of the data that they had migrated over from my 2006 MBP last week.
The belief is, that the migrated data from my 2006 MBP was too great of a leap for the new 10.8. My (a lot) software was too dated and there in was a "blip" of some sort in some / one of the programs.
So - all of the OWC parts and pieces that I had installed are not the issue - as they all show up on the About this Mac - and other things are functional. Yeah.
I now have my 2012 back (with upgrades) in the original form (OS and programs) and I will start a one by one migration of programs that I do need and use. Being cautious not to make one large transfer.... weeding out programs that will no longer be needed or will work on the OS 10.8. I will manually set up the email accounts one by one.
Fingers crossed.

Photoshop 7.0 not working after Migrate

Hello all. First post and hopefully not my last. I do hope it is the last time I have a problem though:)
I have a question. I have just used Migrate Assist to transfer my stuff from my 3 year old Macbook 13" to my New MacBook Pro.
I have Photoshop 7.0 on my old Mac, it works fine. Now that I have transfered my life to my MBP, Photoshop is not working. All my other apps work just fine, Word, office, etc.
It states "an unexpected and unrecoverable problem has occurred because of a program error."
I am a self-employed artist and a company I worked for authorized me to use this a couple of years ago. I will admit, I am much better using a program than I am with the ....umm... software side of things.
Any help would be great.

Sounds like you will have to try reinstalling PS 7 to replace any files that didn't migrate properly.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

Application is not working after migrated to 11.1.2.4

Hi expterts,
I developed an adf application on JDeveloper 11.1.1.6. It works without problem on 11.1.1.6.
Briefly uses following technologies: ADF faces, facelets and taskflows, EJB, hibernate...
When i wanted to go on develop with 11.1.2.4, I copied my App root folder to another folder. And chosed .jws application file from 11.1.2.4 version. Then IDE wants me to confirm about migration, then i accepted.
I develop a supplierList structure for feeding the select one choice components' selectItems. These provide load the db objects on the first calling and manages by my ListManager class.
These supplier classes initialize on the MBean init method. MBean init method calls on taskflow initializer. The project (VCUtil) that includes Supplier classes is on my main ViewController project as ADFLibrary.
But after migration when i deploy the application on my Integrated weblogic Server. oops does'nt seen my jspx screens properly on first attempt which includes supplier classes. But when i refresh the screen it can be loaded properly.
The log contains only that line:
<20-Sep-2013 10:33:31 o'clock EEST> <Notice> <Stdout> <BEA-000000> <10:33:31,189 DEBUG [PerformanceMonitor_lsr6sq_Impl] Method public java.util.Collection com.acme.model.domain.ad.sessionbean.ADManagerBean.findCurrencies() took 167 (ms)>
<20-Sep-2013 10:33:31 o'clock EEST> <Info> <ServletContext-/RestAutomation> <BEA-000000> <JspServlet error: Servlet unable to dispatch to the following requested page: The following exception occurred:oracle.adf.controller.activity.ActivityLogicException: ADFC-06015: An exception occured when invoking a task flow initializer.>
My first supplier class is CurrencySupplier, and i can see acc.to the log it works, the second one is DepartmentSupplier class. So i expect log stdout about findDepartments() method too. But nothing, i guess when executing on CurrencySupplier there might be a wrong, that's why can not go on. But when i refresh the page at that time executes the DepartmentSupplier class. If i refresh page for Supplier class count times then page loads.
    public void init()
        try
            if (ObjectUtil.isNull(currencySupplier = (CurrencySupplier)ListManager.getInstance().getSupplier("currencies")))
                currencySupplier = new CurrencySupplier();
            if (ObjectUtil.isNull(departmentSupplier = (DepartmentSupplier)ListManager.getInstance().getSupplier("departments")))
                departmentSupplier = new DepartmentSupplier(false);
            if (ObjectUtil.isNull(countrySupplier = (CountrySupplier)ListManager.getInstance().getSupplier("countries")))
                countrySupplier = new CountrySupplier();
            if (ObjectUtil.isNull(cityForCountrySupplier = (CityForCountrySupplier)ListManager.getInstance().getSupplier("citiesforcountry")))
                cityForCountrySupplier = new CityForCountrySupplier(false, null);
            else
                cityForCountrySupplier.refreshList(null);
            if (ObjectUtil.isNull(districtForCitySupplier = (DistrictForCitySupplier)ListManager.getInstance().getSupplier("districtsforcountry")))
                districtForCitySupplier = new DistrictForCitySupplier(false, null);
            else
                districtForCitySupplier.refreshList(null);
public class CurrencySupplier extends SimpleListSupplier
    public CurrencySupplier(boolean blankItemApplied)
        super(blankItemApplied);
    public CurrencySupplier()
        super();
    @Override
    public void loadList()
        try
            UtilBean utilBean = new UtilBean();
            clearList();
            list.addAll(utilBean.findCurrencies());
            Collections.sort(list);
            itemList.addAll(ConversionUtil.getConvertedToSelectItemList(list, isBlankItemApplied()));
        catch (Exception exc)
            exc.printStackTrace();
    public String getListName()
        return "currencies";
I hope that i could explain the problem
Thx, bgrds

Are there missing / invalid entries in Settings >> General >> About ?

PPR does not work after migrating from ADF 11.1.1.0.2 to 11.1.1.1.1

Hi, I'm able to programmatically refresh my UI components in ADF 11.1.1.0.2. After migrating my application to ADF 11.1.1.1.0 using the latest Jdev, I noticed that all the programmatically PPR no longer work. I'm using ADF Faces, managed beans and EJB. Data Control is not used.
In addition, I noticed in Section 7:Rerendering Partial Page Content of the latest Web User Interface Developer's Guide(B31973-03), a new paragraph was added, stating that the clientComponent attribute of the target component should be set to "true" to enable PPR programmatically. An earlier version of the developer guide(B31973-01) does not have this paragraph.
Given the huge amount of work required in going back to update the code, is there a way for me to set ADF 11gR1 to restore to the earlier behaviour in 11.1.1.0.2 by setting some parameter somwhere (e.g. in the web.xml)?

No there is no such switch. If you don't want to go through your code (which should be possible by find in files with a regular expression), you have to switch back to 11.1.1.0.2.
This would not be an option to me because of the buds fixed in 11.1.1.1.0.
Think aoubt the next version which is scheduled later this year. There you will have the same problem. If you are not fixing the code you have to stay on 11.1.1.0.2 forever.
Timo

Hotkey (Ctrl+B) is not working after migration from Forms 6i to 10g

Dear Gurus,
Need your help regarding the following problem:
After migrating from Forms 6i to 10g (Rel 2), Ctrl+B (used to list the blocks in a form) hotkey is not working anymore (all other hotkeys are working fine). I've checked my FMRWEB.RES and it contains an entry for Ctrl+B:
66 : 2 : "Ctrl+B" : 70 : "Block Menu"
Additional Information:
OS: AIX
NLS_LANG = UTF8
fmrweb_utf8.res also contains the same text for Ctrl+B as above.
I tried to reproduce it on my Windows Machine (with NLS_LANG set to AMERICAN_AMERICA.WE8ISO8859P1) and its not working as well. I don't have right to put move files on AIX server but i can try anything (on my local system) suggested by the Oracle gurus.
Best Regards,

Dear Gerd,
"are you sure, that it is the hotkey"
Yes, i am dead sure. Since:
(1) It was working fine in forms 6i
(2) If you run a form and select Help => Keys, you will see Ctrl+B on the top of list
The problem is its not taking into account the keys which i am defining in the file (although i am following the same procedure detailed on metalink.oracle.com).
Regards

My iphotos is grey out and new photos app in Mac is not working after update.

My iphotos and Photos app have stopped working after update today. I am getting this error message.
Process:
Photos [934]
Path:
/Applications/Photos.app/Contents/MacOS/Photos
Identifier:
com.apple.Photos
Version:
Build Info:
PhotoApp-209052000000000~4
Code Type:
X86-64 (Native)
Parent Process:
??? [1]
Responsible:
Photos [934]
User ID:
501
Date/Time:
2015-04-18 21:58:43.854 +0530
OS Version:
Mac OS X 10.10.3 (14D136)
Report Version:
11
Anonymous UUID:
90C1B836-26D6-7503-1EC1-7E9457501D0F
Time Awake Since Boot: 1400 seconds
Crashed Thread:
0
Exception Type:
EXC_BREAKPOINT (SIGTRAP)
Exception Codes:
0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/PhotoLibraryPrivate.framework/Versions/A/Fram eworks/PhotoLibraryServices.framework/Versions/A/PhotoLibraryServices
Referenced from: /Applications/Photos.app/Contents/MacOS/Photos
Reason: image not found
Binary Images:
0x7fff6b3a1000 -
0x7fff6b3d7837 dyld (353.2.1) <65DCCB06-339C-3E25-9702-600A28291D0E> /usr/lib/dyld

Library not loaded: /System/Library/PrivateFrameworks/PhotoLibraryPrivate.framework/Versions/A/Fram eworks/PhotoLibraryServices.framework/Versions/A/PhotoLibraryServices
Referenced from: /Applications/Photos.app/Contents/MacOS/Photos
Reason: image not found
There's a system component that 's missing that Photos is trying to use. You'll need to boot into the Recovery volume (boot with the Command + R keys held down) and reinstall the system.

Hotline is not working after migrating to MPLS

Hi,
I am facing one new problem, after migrating with MPLS link my customer not able to make calls. If he connecting to Leased Line then its working(OLD LINE). In data also we faced same problem, after removing the TCP Compression then only data also start to work. If any body aware of this type of problem can you please help me.
Regards,
Sunish

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

Mac Menu not working after updated to 10.6.2

Strange behavior after I updated my Macbook 13" to Snow Leopard 10.6.2. Whenever Apple own software crash (not responding), e.g. Finder, iTunes, iPhoto etc, all the functions under the Apple icon (top right) in menu bar no longer work. As such I can't shutdown or restart my mac. Pressing the power button will not work as well. I either have to force shutdown (press the power button for few seconds) or use terminal to fire "sudo halt" command to shutdown, which takes longer than usual to shutdown, few minutes. In fact after I updated to 10.6.2, Apple software is prone to crash. Running disk utility repair disk permission and repair disk does not fix any of the above problem. I am reluctant to do a fresh install. Anyone facing the same problem? Any solution? Or should I wait for the next update release?
Please help.

HI,
*"repair disk does not fix any of the above problem"*
If Disk Utility reported errors, did you repair them?
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
Might be a good idea to run the Apple Hardware Test just in case, go here.
http://support.apple.com/kb/HT2684
Try downloading and installing the 10.6.2 combo update here.
http://support.apple.com/kb/DL959
Then repair disk permissions.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Deleting the com.apple.systemiuserver.plist file should fix the Status Menu Bar issue as "donv (The Ghost)" suggests.
One last thing... please click My Settings on the right side of this window and update your forum profile. Thanks!
Carolyn

Custom app working with CRE 8.5, not working after migration to BOE XI

Hello,
I have this custom legacy app coming from way back in time, which -among other things- connects to a CRE 8.5 APS to get the list of available reports and the rights of a given user over those reports (view instances, request on demand, and so on). The logic of this custom application works quite well, though it's a bit cryptic (to me at least).
Now, I have the task of migrating the app from CRE 8.5 to BOE XI R2. The migration itself was rather easy, thanks to the migration wizards, and all the users, groups, permission settings, and everything else seems to have been properly replicated in the BOE XI CMS. However the custom app is not working so well after the migration: it can retrieve all the info about the reports and do pretty much the same it was doing before the migration, but when it comes to user's security settings (permissions to see or request a given report) the app just can't get the proper info.
To properly explain what's going on, I will have to go into detail with some lengthy description of the code.
Here it goes. This is the (partial) code that queries if a given user (UserID) has permission to view and/or request on demand a set of reports in the server:
Qry2 = "Select SI_ID, SI_NAME From CI_INFOOBJECTS"
Qry2 = Qry2 & " Where SI_PROGID = " & "'" & "CrystalEnterprise.Folder" & "'" _
         & "and SI_PARENT_FOLDER in " & GetFirstLevelFolder(iStore, FolderProperty)
Set varFolders = iStore.Query(Qry2)
For Each Item In varFolders   'First level displayed folder
      Set infoSLevelFolders = GetSubfoldersByParentID(iStore, Item.ID) 'Second level displayed folders
      intFolderRightsCount = GetRightsCount(iStore, UserID, Item.ID)
      For Each infoSLevelFolder In infoSLevelFolders
           Set infoReports = GetReportsByFolderID(iStore, infoSLevelFolder.ID)
           For Each infoReport In infoReports
                  rsOutput.AddNew   'Set output recordset fields
                  rsOutput.Fields("FOLDERID") = Item.ID
                  rsOutput.Fields("FOLDERNAME") = Item.Title
(not sure why, but the message won't accept more text than the above... I will have to post a second message with the rest of it)
Edited by: Marcelo Rybertt on Mar 30, 2010 8:39 PM
Edited by: Marcelo Rybertt on Mar 30, 2010 8:49 PM

                  rsOutput.Fields("FOLDER2ID") = infoSLevelFolder.ID
                  rsOutput.Fields("FOLDERNAME2") = infoSLevelFolder.Title
                  rsOutput.Fields("REPORTID") = infoReport.ID
                  rsOutput.Fields("REPORTNAME") = infoReport.Title
                  If UserID = 0 Or intFolderRightsCount > 1 Then 'no this user or rights on the folder level
                     rsOutput.Fields("ROD") = False
                     rsOutput.Fields("VRI") = False
                  Else
                     intReportRightsCount = GetRightsCount(iStore, UserID, infoReport.ID)
                     If intReportRightsCount = 4 Then
                        rsOutput.Fields("ROD") = False
                        rsOutput.Fields("VRI") = True
                     ElseIf intReportRightsCount = 5 Then
                        rsOutput.Fields("ROD") = True
                        rsOutput.Fields("VRI") = False
                     ElseIf intReportRightsCount > 5 Then
                        rsOutput.Fields("ROD") = True
                        rsOutput.Fields("VRI") = True
                     Else
                        rsOutput.Fields("ROD") = False
                        rsOutput.Fields("VRI") = False
                     End If
                 End If
           Next
     Next
Next
I have two scenarios, for the same user. The first scenario is the custom app working against a CRE 8.5 server. The second scenario is the same app against a BOE XI server, and the data in that server is the result of running the import wizard, using the 8.5 server as the source of data. The app was done with VB6, and the only difference between working against 8.5 or XI, is the set of dll's used in each case (code compiles flawlessly with either set of libraries).
ROD stands for Request On Demand. True means the user can ROD. False, the user can't.
VRI stands for View Report Instance. Same deal.
intFolderRightsCount and intReportRightsCount are both calculated from the GetRightsCount function, like this:
Set iReports = iStore.Query("Select SI_ID From CI_INFOOBJECTS Where SI_ID=" & REPORTID)
u2026
Set principal = iReport.SecurityInfo.AnyPrincipal(UserID)
u2026
GetRightsCount = principal.Rights.Count
(again, same issue with the message... need to continue this in a third -and last I hope- post)

Preview and Mac Mail not working after upgraded to 10.4.11

Hello,
I just upgraded to 10.4 everything works fine, after I upgraded to 10.4.11, I find funny noice on my hard drive and preview, mac mail is not working. Trashing the preference is not working.
Urgent help please.
Thank you
Benny

There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/downloads/MacOS_X_10_4_11_Combo_Update__PPC
And for Intel Macs: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eintel.html
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

Mac Mail not working after Mavericks upgrade

After successfully updating to Mavericks, Mac Mail app does not launch (window does not appear on screen) and requires force quit to stop. I also have Outlook loaded and it started up and works fine. I would rather use Mail. Anyone else have this issue? Is there any easy fix? The app doesn't launch completely so I can't clear any of the accounts to try to start Mail fresh.

Here's my issue and how I fixed it. If you have this problem then try what I did.
When I lauched Mail, it appeared like it opened but then wouldn't display any windows at all and wouldn't
update my mail count on the icon.
Within mail there is options to display. The setting was set to "assign to none". That makes mail appears as though it is not working and seemed to bottleneck how mail operates.
In the dock - click and hold on Mail - open Options and chose the display you wish to assign the window to display
mail.
Hope this helps.

HT4889 Password not working after migration

I migrated files from my iMac to my MacBook Air. However, once completed, my login passwords would not work on teh MacBook Air. I know I am using the right password. How do I fix this?

In the meantime I was able to solve the problem.
The problem arises when the operating system on the target computer is an older version than on the source computer. I had OS X 10.8.2 Mountain Lion on my old MacBook Air (Source) and OS X 10.7.x Lion on the new MacBook Air (Target).
After installing OS X 10.8 from an USB Stick the problem was solved and I was able to log in. The transfer of user accounts and programs was done.

Application not working after migration

Hi,
An application developed in HTMLDB Version-2.0 is migrated to a new server with version-2.2. Few links like edit (to edit rows) are not working. What could be the reason

Hi
1) Old URL-
http://es40.au.oracle.com:7778/pls/marvel/f?p=102:1:254279794898873443:fsp_sort_6::RP&fsp_region_id=5100103122412382
2) New URL - http://sgord-dev1.sg.oracle.com:7780/pls/apex/f?p=135:1:1558885729019129 (which is not working)
3) Application ID before migration - 102
4) Application ID now is - 135
If I login as Admin, all links are working properly, and can edit everything. But if I login as different user edit links and dropdowns are not displayed.
Regards,
Pallavi

Mac Office not working after migration

Similar Messages

Maybe you are looking for