MAC On Windows - Virtual Machine

Before installation of the MAC on Windows, i would like to know if i can install MAC on a PC running a Windows XP SP 2 !
Regards

There are people who have done it, in fact pystar was in the news for doing it and has been doing it for a while and still hasn't been shut down. The apple EULA forbids it though. But there are no legal ways to do it, and definitely no VM emulations able to.
Message was edited by: college_kid491
Message was edited by: college_kid491

Similar Messages

Can't install my printer on Windows virtual machine using Leopard OS

Have just installed Leopard and Parrallels software. I cannot install my HP C3180 printer on the virtual windows machine. USB plug and unplug are not recognized and suspect it is because the printer is in use on the Mac OS side. How can I get the same printer to be connected and usable in both MAC and Windows virtual machines?

I had exactly the same issue as you when I wanted to print from my iMac to a printer that was attached to a Windows 7 machine.
I found the solution at an Apple Support page, located at "http://support.apple.com/kb/HT3049".
What really solved my problem was the introduction of the user PASSWORD in the address line, like this:
smb://user:password@workgroup/server/sharename
Read the Apple Support page I mentioned carefully to better understand what you will be doing.
I hope this helps you.

Windows virtual machine with labview on a Mac

I am about to buy a Mac laptop with virtualization software (either VMware or Parallels), then create a Windows 7 virtual machine and put Labview for Windows Professional on it.
I searched the board and found some discussion of this configuration but it is several years old.
I would just like to hear from people who have done this and learn from their experiences. Are there any pitfalls, features that don't work, performance problems, setup difficulties, whatever. Also, do you prefer VMware or Parallels.
One other thing: I would like to create at least four virtual machines (Windows with Labview development, Windows without LV to test the applications in a non-labview environment, and similar for MacOS}. Is this a reasonable thing to do?
Regards,
David

Hi David,
As indicated above I have been running a windows virtual machine using VMware on a 17 inch macbook pro for quite a while now. I have not experienced significant problems. Labview and labview generated apps work fine in the virtual environment.
But would I do it again? I think not. The economics don't work. You can buy a quite capable Windows laptop for less than $500. The virtual machine alternative costs $200 for a copy of Windows, $80 for virtualization software (Parallels or VMware) plus extra memory on the Mac (I have 8 gb) plus a more powerful machine, etc. I ended up paying over $3,000 for the Mac hardware and extra software. The alternative would have been $1,500 for a 15 inch Mac plus $500 for a Windows laptop.
Also, there is definitely a performance penalty. Virtualization is not free. Start up and shutdown times for Windows are more than twice as long under VMware than with a cheap HP laptop.
It is nice having all my files (Mac and Windows) on the same machine but I could have easily networked the Mac and Windows and had effectively the same result. Expected benefits, such as a single backup disk for both operating systems didn't work out. Apple's time machine software views the entire Windows environment as a single lump, so I am still stuck with two backup drives.
So the good news is that it works. The bad news is that the costs (in my opinion) exceed the benefits.
David'

Modify security on "Windows Virtual Machine" SCPs

Hi. Any domain joined VM will create serviceConnectionPoint object under the computer object in AD (http://blogs.technet.com/b/askcore/archive/2012/09/18/what-is-the-windows-virtual-machine-object-in-active-directory.aspx).
We have special security requirements in our AD and by default these SCPs for VMs are visible to any user which breaks our security rules. My questions:
a) is it supported to change security on this object (doubt it, but I'm asking anyway)
b) what happens if I change the security on this object, specifically if I remove Authenticated Users from the ACL? Can I expect any problems?
c) what exactly is the SCP used for/by in this case? The article I mentioned above explains what it is, but not really what is it used for.
Thanks in advance

Hi MarkosP,
I removed the "Authenticated Users" for test , when I logon DC with a domain user I can not "manage"/query the computer object .
"what exactly is the SCP used for/by in this case?"
Maybe you can get accurate assistance from DS forum ：
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverDS
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Using Windows Virtual Machine on Windows 7 Ultimate

I downloaded Windows Virtual Machine (Windows6.1-KB958559-x86-RefreshPkg.msu) for my machine running 32 bit Windows 7 Ultimate.
When I try to install, I get the message: The update is not applicable to your computer
I have enabled virtual machines in my BIOS and successfully installed Windows XP Virtual Machine
What I want to do is create another Virtual Machine but when I open Windows Virtual PC
there is no option Virtual Machines menu item to select to create a virtual machine

Cool, thanks. How do I find Ben Armstrong's
virtualization Blog? When I do, how to I find the appropriate article?

Can you tell me how to "eject" my tablet from my mac, so i can use it on my windows virtual machine.

Hi. I have installed a windows 7 virtual machin on my mac so i can use 3ds max. I can't use my wacom tablet on my virtual windows 7 machine though, unless i "eject" it from my mac osx. I have a macbook pro i7, and I cant find any option to "eject" my tablet. I have uninstalled it from my mac, but that also didnt help. please help. thx

Try clicking on the icon and dragging it to the trash.

Windows virtual machine on a Mac mini

Can the Fusion drive in a Mac mini be partitioned to run a Windows7 virtual machine?

Welcome to Apple Support Communities
You don't have to partition the Fusion Drive to use a virtual machine. Depending on the app you use to make a virtual machine, the virtual machine is stored in Documents folder as a virtual hard drive, so you don't have to worry about it.
You can use Parallels, VMware Fusion or VirtualBox to create a virtual machine. VirtualBox is free and works correctly, so I suggest you to try that one first

How do I run a Windows virtual machine?

I have a program for my research (Scigress) that only runs on Windows. I would like to be able to run the program on my Mac, I assume the best way to do that is to run a virtual machine. I don't want to run Windows all the time, since I strongly dislike Windows. Is there a way to do this in which I can turn Windows off as soon as I'm done with that program? What would be the best way to do this, or the best app to use? I have a 2009 Macbook with Lion installed.

I apologize, dragon. I didn't fully read your post well before opening my mouth. Sorry, "the ADD" has me (even as a grown man).
You have really two fundamental choices here on where you could take this. My primary concern above all would be "how resource intensive is this Windows software"? I mean, is it like a CAD or other 3D modeling app or otherwise just... monster? Working in the tech field I have seen CAD programs opening a complex drawing nearly bring say... a dual Xeon, 16GB RAM, 2-4GB of VRAM with cards in tandem (Crossfire or SLI in the PC world, I don't know if it's called the same over here)... but it would literally freeze these beasts of workstations solid for 5-20 minutes while opening and rendering some of these mind-blowing CAD drawings (talented guys, no way I could manage to create some of those 3D models of such just... complexity... in a virtual environment).
So-- with that being said, that's worst case scenario on the software. That would pretty much really cripple your luck with virtualization/emulation of a guest OS (that is, the operating system that is running "under the command") of the main one you're running.
If the program is not that kind of one, it would certainly be more convenient to you to just literally almost open "Windows" like it's just another app, literally... and close it/shut it down as soon as you're done, leaving your other OS X desktop work up and running.
If it *is* going to be a resource hog, then your second option is Boot Camp, which I'm sure you've heard of... You basically split the hard drive (partition it) into two segregated areas of storage and literally you can run either/or and utilize the full power of the machine this way, as you're not sharing CPU/memory. The downside, as sort of mentioned-- is that you have to boot into one or the other, it's not a "program" like the other is, almost; so you'd have to "shut down" or use the little utility app at least to reboot into OS X.
Think about your circumstances and take a look at that article comparing or also research Allan's suggestion, that is a new one to me. That will at least get you familiar with what the "experience" of virtualizing operating systems is like... then let us know what you think is best and we can go from there and help you. Sorry about jumping the gun earlier. Hope I made up for it with an abundance of information at least the second time...

What is best Windows Virtual Machine?

Hi
I have a lot of stuff remained from my old Windows as some softwares without Mac couterpart or Word documents with ruined fonts which only can be seen on MS Word . I need a Virtual Machine with minimum performance reduction. I tried VMWare but it really stucks , I also tested Wine Bottler but it can run a limited number of Windos apps. I have heard about Boot camp but I dont want to log out for using windows.
My Config:
Mountain Lion on Macbook Pro , late 2011, core i7 2.4 GHz, with 4G RAM.
Anyone knows which VM is most compatible with Mac ML?

Paralles 7 Their annual updates seem spendy too me. Right now however if you Purchase PD 7 then it is a free upgrade to PD 8 when it is released in Sept. http://www.parallels.com/products/desktop/
free upgrade documentation: http://www.parallels.com/techguarantee2012/
Don't forgret Virtual Box
https://www.virtualbox.org/ freeware/shareware/opensource
MacBook Pro, Mac OS X (10.8.1) 2.4GHz IntelCore i5 320 HD 8GB RAM ParallelsDesktop7.0

Recognizing hardware from a Windows virtual machine hosted on Linux

Hi,
I would like to isntall windows in a virtual machine run from linux, and run my labview vi's and do aquisition from there. I tried once using a virtualized Windows XP 32-bit on ubuntu 64-bit, with Virtualbox, but the windows installation didn't recognize my PCI-MIO-16E-4 card. Maybe its because I didn't have the linux drivers installed.. I don't know. Soon I will begin using a the 7853R FPGA with the PXI-1036 Chassis, and would prefer if my virutalized Windows installation could see this hardware.
Has anyone gone through the steps of using NI hardware from a virtual Windows installation? Either Virtualbox, Xen, Vmware, or whatever..
Thanks,
-Sidney
NI Hardware: PXI-7853R, PCI-5122, PCI-6733, PXI-1036, PCI-MIO-16E-4, PCI-6110
Computer Hardware: Xeon Quad Core - 2.33 Ghz, 8 GB RAM
Software: Labview 2009, Labview FPGA 2009, Vista 64-bit, MAX 4.6, DAQmx 9.0, NI-SCOPE 3.5
Solved!
Go to Solution.

Hi Sidney,
I see that this thread is a bit old, but I still have something to add. I know for a fact that VirtualBox, VMWare and VirtualPC won't let a guest OS see any real PCI card installed on the host computer. However, you might have better luck with Xen. There are options in Xen which allows you to pass PCI devices forward to guest OS's. People have gotten pretty far with using PCI forwarding that they have even managed to run Windows Vista with full hardware acceleration with Aero as a guest operating system. The only requirement is for your CPU to have virtualization support, i.e. the vmx or svm flag. The only catch is, Xen is significantly harder to set up.
I haven't tried this myself, and I am not from the LabVIEW group, and I am by no means authorative on this topic (don't let my signature fool you).
If you manage to get this to work, we would be interested to hear from you!
Yi
Software Developer
National Instruments - Electronics Workbench Group

The mouse that came with my imac does not work very well in a window virtual machine

I finally got Windows 7 on my iMac and am using FusionVM. I installed one of my favorite games and the mouse goes soooooo slow I cannot use the game. Any suggestions? I am using the mouse that came with the iMac, magic mouse(??).

I have already tried that. The mouse speed on the iMac is good. The mouse speed in other Windows7 programs is good. The problem arose when I tried to play Zuma's Revenge using Windows7. This is the first game I have loaded since setting up the virtual machine.

3D gaming in a Window virtual machine.

I used VM Fusion ware to create my virtual machine on my computer, hoping to play pc games from my last computer. I think that my Directx 3d Driver is not showing up as being active. If anyone knows how I can run my PC games, that didn't need an amazing graphics card with my pc, to work on my New Macbook.

No it is not the same. Fusion is a virtual environment that does not use Windows the same as in Bootcamp. In BootCamp you can get better graphics and a few things that will not run on fusion will run in bootcamp. Especially 3d games. Fusion can't access the 3d effects.

Windows Virtual Machine Doesn't Start

I recently installed a clean install of windows 7 pro 64-bit. I installed windows XP mode as described on the microsoft website followed by the update provided but when I try to open windows virtual PC nothing happens. I click on the program icon and nothing happens. When I try to open windows XP mode I get the error message "Cannot start Windows Virtual PC Host Process. Check the System event log for more detials. Server execution failed" Once I check the event log there is nothing there. The PC I am running on supports hardware virtualization and it is enabled in the bios. My coworker just installed windows XP mode on the machine right next to mine and it works fine. Can someone please tell me how to get this thing to work. Running virtual 2007 is not an option.

Same problem.
In past i've used successful windows virtual pc, but now it won't work.
I tryed uninstallind the Windows6.1-KB958559-x64.msu update and the windows xp mode and deleting the old virtual machines.
After reinstall the Windows6.1-KB958559-x64.msu update the problem returns as before.
I get this error: "Cannot start Windows Virtual PC Host Process. Check the System event log for more detials. Server execution failed"
Looking at the event viewer into "Applications and Services Logs/Microsoft/Windows/Virtual PC/Admin" i find "Virtual machine ''. Error - Server execution failed"
(0x80080005)" and just before this message i get "One or more files from the Virtual PC installation are missing. Please reinstall Virtual PC and try again."
So i tryed a lot of times uninstalling and reinstalling, unsucessfully. What i can do?
XML of "Virtual machine ''. Error - Server execution failed" error:
Log Name:      Microsoft-Windows-Virtual PC/Admin
Source:        Microsoft-Windows-Virtual PC
Date:          05/03/2010 14:00:13
Event ID:      1000
Task Category: None
Level:         Error
Keywords:
User:          Riccardo-PC\Riccardo
Computer:      Riccardo-PC
Description:
Virtual machine ''. Error - Server execution failed
(0x80080005)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Virtual PC" Guid="{A759B4BE-484C-414D-A97D-961D33C31A3D}" />
    <EventID>1000</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-03-05T13:00:13.453470800Z" />
    <EventRecordID>295</EventRecordID>
    <Correlation />
    <Execution ProcessID="5032" ThreadID="4100" />
    <Channel>Microsoft-Windows-Virtual PC/Admin</Channel>
    <Computer>Riccardo-PC</Computer>
    <Security UserID="S-1-5-21-653287977-206352491-2073433540-1000" />
</System>
<EventData>
    <Data Name="String1">
    </Data>
    <Data Name="String2">Error - Server execution failed
(0x80080005)</Data>
</EventData>
</Event>
XML of "One or more files from the Virtual PC installation are missing. Please reinstall Virtual PC and try again."
Log Name:      Microsoft-Windows-Virtual PC/Admin
Source:        Microsoft-Windows-Virtual PC
Date:          05/03/2010 13:59:43
Event ID:      45
Task Category: None
Level:         Error
Keywords:
User:          Riccardo-PC\Riccardo
Computer:      Riccardo-PC
Description:
One or more files from the Virtual PC installation are missing. Please reinstall Virtual PC and try again.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Virtual PC" Guid="{A759B4BE-484C-414D-A97D-961D33C31A3D}" />
    <EventID>45</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-03-05T12:59:43.357816300Z" />
    <EventRecordID>294</EventRecordID>
    <Correlation />
    <Execution ProcessID="4320" ThreadID="5100" />
    <Channel>Microsoft-Windows-Virtual PC/Admin</Channel>
    <Computer>Riccardo-PC</Computer>
    <Security UserID="S-1-5-21-653287977-206352491-2073433540-1000" />
</System>
<EventData>
</EventData>
</Event>

How to make Mac OS X virtual machine on my mac mini?

Dear All,
I've just bought mac mini device, upgraded my memory (now I have 16GB).
The mac os was already installed on this device, and there were NO DVR or blue-ray media in the box which contains the installation of the OS X.
Now I want to install VirtualBox, WMWare or other virtualization (still don't know which one to select)
and I want to create a guest machine with the same OS X. As far as I know, the license on OS X permits to run OS X guest under OS X host.
But here is the question: the VirtualBox software will ask me "give me a disk with installation of OS", where shall I get this disk?
What shall I give to the virtual machine software to install the same OS X that is running on my mac mini?
Regards,
Ihor.

Actually, with Parallels9, if you have OSX Lion or later
as the host OS, you can create an OSX VM with no disks
and just an internet connection. Parallels will utilize
the RecoveryHD on the host and do an internet recovery
to the create the VM. If you have fast internet, this is the
simplest approach.
If you have previously purchased Lion or Mountain Lion,
you can redownload the installer and extract the install image
from the package. Then, with Parallels anyway, when prompted for
an install disk , you select the image.
As far as licensing, running Lion, Mountain Lion, and Mavericks
in a virtual machine does not violate the EULA as long as
the VM is run on Apple hardware.
From the EULA for Lion
(iii) to install, use and run up to two (2) additional copies or instances of the Apple Software
within virtual operating system environments on each Mac Computer you own or control that
is already running the Apple Software.
From the EULA for Mavericks:
(iii) to install, use and run up to two (2) additional copies or instances of the Apple
Software within virtual operating system environments on each Mac Computer you own
or control that is already running the Apple Software, for purposes of: (a) software
development; (b) testing during software development; (c) using OS X Server; or (d)
personal, non-commercial use.

Windows Safari Abends - Dual G5 Power Mac with Windows Virtual PC

Installs, but abends when bringing up my google home page.
Power Mac G5, Power Book G4 Mac OS X (10.4.9)

I should have indicated Windows XP - sorry.

MAC On Windows - Virtual Machine

Similar Messages

Maybe you are looking for