Mac OS 10.3.9 and HP 5L - need driver
I would like to be able to use my old HP Laserjet 5L with my Powerbook (OS 10.3.9) - any drivers available??? I do have a usb to parallel adapter that I used with Powerpoint (that's how I used this printer on a G3 with OS 9).
Thanks for your response - I did download the HP 4 drivers, but it seems that my computer does not even "see" the printer - only that there is a USB to parallel cable. This is a cable I got with PowerPrint (for printing to a PC (parallel) printer, and it is not supported past OS9. Maybe I should have a different adapter???
Similar Messages
-
Backing up Mac HD with Time Capsule AND an external hard drive
I am sure that this question has been asked one way or another but I can't seem to find the exact answer.
I would like to back up my Mac HD with the Time Capsule AND another hard drive essentially to create two backups. Should one fail, I still have another copy as a precaution. The Time Capsule will be my primary back up because my external hard drive is usually switched off and will only be turned on from time to time to perform "less frequent" backups.
With Time Capsule AND the external hard drive on, will Time Machine just update the backup on the external hard drive without becoming confused with the other copy on Time Capsule? In other words, can Time Machine distinguish between two different Time Machine Backup files and bring them up to date accordingly?
I understand there is an archive function on the Time Capsule, which would also serve the purpose. However, I am wondering if there is another way.
Thanks.Rheopaipo wrote:
I am sure that this question has been asked one way or another but I can't seem to find the exact answer.
I would like to back up my Mac HD with the Time Capsule AND another hard drive essentially to create two backups. Should one fail, I still have another copy as a precaution. The Time Capsule will be my primary back up because my external hard drive is usually switched off and will only be turned on from time to time to perform "less frequent" backups.
With Time Capsule AND the external hard drive on, will Time Machine just update the backup on the external hard drive without becoming confused with the other copy on Time Capsule? In other words, can Time Machine distinguish between two different Time Machine Backup files and bring them up to date accordingly?
I understand there is an archive function on the Time Capsule, which would also serve the purpose. However, I am wondering if there is another way.
I don't think it's possible to configure Time Machine to back up to two locations without modifying its settings frequently.
You might consider using that external drive to hold a bootable backup. You can create such a thing with either of the utilities SuperDuper! or Carbon Copy Cloner. If you pay the registration fee for SuperDuper! (~US$28), there's a mode where it will back up only what has changed, which makes the backup operation run quicker. (Carbon Copy Cloner may offer a similar feature.) -
Mac crash deleted various apps and broke the disk drive. How do I get my apps back?
My Mac 10.8.3 crashed a few months ago. It deleted various apps like garage band and iPhoto etc. During that time my mac also fell breaking the disk drive. I fixed the crash, but I have no clue how to reinstall these applications, especially with the disk drive being broken. Anyone have any ideas?? Thanks!
you need to purchase an external hdd and insert the grey disk 2 whick origionally came with the mac new. this disk contains the applications and apple hardware test.
-
DW on Mac, CS3/CS5 using SFTP and/or FTP, need it secure!
Folks:
DW CS3 or CS5 running on an quad-Intel iMac, 10.6.4, connecting to a host that uses identical credentials for SFTP and FTP.
It's important to be assured that the connection is in fact secure.
If you set "connect using SFTP" will DW CS3 complain if the connection cannot be made securely? Will DW then default to ordinary, insecure FTP? If so, will DW inform you? Is there an easy way of verifying the current connection mode, SFTP or FTP, within DW? (The FTP connection log does not say.) Is there an easy way of doing it in MacOS or with a simple utility? (Can be done, but not conveniently, with L'il Snitch.)
Is DW CS5 any different?
TIA,
hen3ryFolks:
Problem solved.
It's clear that FTP and SFTP are fundamentally different protocols, but the DW protocol selection strongly implies similarity by offering SFTP as a minor option under the main selection of FTP. I think it would be much clearer if SFTP were offered as a major option -- and then there would be an opportunity for offering SFTP options, too.
Here's a way of distinguishing which of these two is active: Connecting to the target site using FTP results in a succession of text entries in the optionally viewable FTP log -- no surprise. I discovered that connecting to the same site with the same credentials and the addition of checking the "Use SFTP" option results in only line feeds --scrolling, but no visible text-- in the FTP log window. I guess that's a reasonable though a bit indirect way of informing users that the link is active and secure. (What does one do to diagnose problems with SFTP for hosting services that don't support FTP? I don't know there are such services but it should be the great majority of them.) Works in DW CS3 but I didn't check CS5.
Another option, untested but fairly obvious: It's fairly easy these days to control host s/w (personal) firewalls -- even for low-tech users. Establish and verify a link to your server using SFTP, then disable FTP; the link should fail. And vice-versa. This meets my specification of "simple" and should be available with no extra expense and little trouble.
Brief Editorial: From the recent reading I've done on FTP versus SFTP, it is clear that the time to discontinue all support for FTP is long past.
hen3ry -
I have a mac osx 10.4.11 and I would like to upgrade to 10.5 how do I do this please help
If you have an Intel Mac, purchase Mac OS X 10.6 from the online Apple Store. If you have a G4 or G5 Mac, purchase Mac OS X 10.5 from a site such as Amazon. If you have a G3 Mac, you don't.
Mac OS X 10.5 and 10.6 need to be purchased on a retail DVD. No downloads are available to the general public.
(64106) -
I try to install mac 10.4 operating system it says I need a power mac 7.2 driver can anyone help pls
I Try to install mac 10.4 operating system and it says need power mac7.2 driver can anyone help pls
You need to use the computer's original disks or a retail Mac OS X 10.5.6 or earlier DVD which is at least as new as the computer. Another Mac's original disks won't work.
(116048) -
When i login to my mac, it opens iTunes, Skype and AIM. I've tried deleting these from the login items, but they are not on the list. Can anyone help?
babowa wrote:
If you do not lock that folder immediately after deleting all the contents, it will simply populate again (Resume - a "feature" in Lion). You do that by doing a Get Info (highlight folder and press Command + I keys), unlock the lock at the bottom, enter your admin password, then check the box to lock the folder. lock the lock and you're done.
Yes, that is correct. The alternative is to quit all applications prior to logging out. Lion will then have a chance to remove the saved states.
babowa also wrote:
And, for the OP:
It has also been a regular feature of Mac OS to automatically open any window that was open at shutdown. To avoit that behavior, simply close any Finder windows and properly quit applications by closing their window and using Command + Q (or File >Quit).
This was true only for the Finder. Prior to Lion, no other apps would launch unless they were included in the Login Items for the account. And the OS would not restore windows for other apps.
A very small number of apps (TextWrangler is an example) implemented this capability prior to Lion. They could restore previously opened windows. But that is an application feature, and can be controlled by the application's preferences. Lion implements it at the system level, and users have virtually no control on a per application basis. -
My MAC runs very slow. Rainbow wheel every time i try to go somewhere. Im a complete MAC novice. Only really use it for iTunes and email. the odd document here and there. The odd spreadsheet. Was brought up on a PC. I would imagine my system is in mess. I think i downloaded that Mackeeper which i have just discovered was not a good idea. I found a thread about EtreCheck and it suggested i posted the report of my machine which i have done.I only have 2GB of space. Not sure how much i have left. My wife keeps putting photos on here like they are going out of fashion. Bought the machine in 2008 because everybody said you have a MAC. I've never really got to grips with it but at least it worked. Now it does not run very well at all. That spinning wheel is driving me mad. HELP please, never ever used a forum light this either so please go gentle on me. Cheers Paul
EtreCheck version: 1.9.15 (52)
Report generated 8 September 2014 09:09:26 BST
Hardware Information: ?
iMac (20-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information: ?
ATI Radeon HD 2600 Pro - VRAM: 256 MB
iMac 1680 x 1050
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:31:45
Disk Information: ?
Hitachi HDP725032GLA380 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (117.84 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information: ?
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Bose Corporation Bose USB Audio
Apple Computer, Inc. IR Receiver
Gatekeeper: ?
Mac App Store and identified developers
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
[loaded] net.sourceforge.MonolingualHelper.plist Support
Launch Agents: ?
[running] com.trusteer.rapport.rapportd.plist Support
User Login Items: ?
iTunesHelper
Internet Plug-ins: ?
Google Earth Web Plug-in: Version: 5.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
AmazonMP3DownloaderPlugin101749: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
eMusicRemote: Version: (null) Support
eMusic: Version: Unknown
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Flip4Mac WMV Support
Trusteer Endpoint Protection Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
2% iTunes
2% WindowServer
0% coreaudiod
0% fontd
0% rapportd
Top Processes by Memory: ?
178 MB Finder
133 MB com.apple.WebKit.WebContent
109 MB iTunes
92 MB Safari
63 MB com.apple.quicklook.satellite
Virtual Memory Information: ?
24 MB Free RAM
821 MB Active RAM
807 MB Inactive RAM
291 MB Wired RAM
338 MB Page-ins
680 KB Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
I'm using Time Machine and a LaCie external drive to backup. I also have a 8 GB LaCie flash drive I want to use for small jobs. If I plug the LaCie flash drive in, is my Mac going to think it is the LaCie external drive and start trying to backup?
no.
-
I've installed CS6 and web Premium on a Mac running 10.9.5, and Dreamweaver,Flash and Illustrator wont launch. All other components work normally. In Activity monitor it says Adobe switchboard failed to respond. Can anyone help solve this issue?
Release: 4/25/2012
http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-64.aspx -
USB-6009, mac OS 10.6.8 and python
Hello!
I am using USB-6009 under mac OS 10.6.8 and python.
I am trying to run the following commmand:
analogOutputTask = nidaqmx.AnalogOutputTask(name='MyAOTask')
I get the following message
File "/Applications/PsychoPy2.app/Contents/Resources/lib/python2.7/nidaqmx/libnidaqmx.py", line 180, in CALL
AttributeError: 'NoneType' object has no attribute 'DAQmxCreateTask'
Any help would be very mch appreciated,
Thanks
j.Hello Jamyamdy,
Honestly, I am not too sure about this, but were you able to acquire data before or is this your first trial?
From the usb-6009 product page, it says the following.
For Mac OS X and Linux users, download the NI-DAQmx Base driver software and program the USB-6009 with NI LabVIEW or C.
http://sine.ni.com/nips/cds/view/p/lang/en/nid/201987
Regards, -
firefox used to work no problem, I updated firefox a few month ago, now firefox will not open and I get the error message as above
As of Firefox 4.0 and newer one needs both OSX 10.5+ and a Intel Mac.
The last version to work on a Intel Mac using OSX 10.4.* is Firefox 3.6.*
http://www.mozilla.org/en-US/firefox/all-older.html
http://www.mozilla.org/en-US/firefox/7.0/system-requirements/
http://www.mozilla.org/en-US/firefox/4.0/system-requirements/
http://www.mozilla.org/en-US/firefox/3.6/system-requirements/ -
Back to My Mac not working-a diagnosis and a solution
Hello all,
I own a small business and relied on Back to My Mac while traveling. I have had connection issues with BTMM since MobileMe was discontinued. I have found a solution but it is not an Apple solution. Skip to the end if you'd like the straight dope.
FYI: I have exhausted all possible Apple-centric solutions, to the best of my knowledge. This was verified over the phone during an extensive troubleshooting session with a senior Apple specialist. All Macs and OS involved are optimized (in theory) to work with Back to My Mac. The appropriate file sharing options were checked. Users had appropriate access privileges. I have a valid MobileMe ID that has transferred over smoothly to iCloud. Firewall settings were not the issue.
But before we go further, if you are having BTMM connectivity issues, you might want to examine this thread:
https://discussions.apple.com/thread/4071540
And see if it does the trick for you. It seems to have worked for a lot of people. But if it doesn't, please read on.
I have an iMac at my office that I connect to. I have a MacBook that I use to make the remote connections. Before MobileMe was discontinued, I read all support docs on how to make the transition to iCloud. Nevertheless, once MobileMe was discontinued, I began to have BTMM connection issues. My Macbook could "see" my iMac, and vice versa, but once connection was attempted, either through "Share Screen" or "Connect As…", the status bar would run indefinitely and no connection would complete.
First, I tried the Keychain solution indicated above. No dice.
Then I saw the System Preferences>iCloud message that Back to My Mac required NAT Port Mapping and/or Universal Plug and Play settings on my router. I have an old Linksys router, and I was able to upgrade its settings to UP&P, but not to NAT Port Mapping. The situation did not improve.
I went to an Apple Store, spoke with a pair of salespeople who informed me that the problem would most likely be solved by replacing my old router with Airport Extreme, which would automatically upgrade my network to the necessary UP&P and NAT-PM protocols, and if any issues existed after that, they would probably be firewall-related, which I could either fix on my own or talk to an Apple person about.
After installing Airport Extreme, the situation did not improve, and I called Apple Support. I entered the serial number into the web page, and was informed that I was not qualified for tech support because my warranty had expired, even though I had made the purchase the previous evening. I checked the option that indicated that I thought this was in error and that I was in fact qualified, and ten minutes later, I received a phone call from Apple.
At first, I was on the line with a Airport Extreme specialist, who ran down the Airport Utility checklist. With my wife at the Macbook at home, and myself in my office at the iMac and on the phone with the Apple specialist, the troubleshooting began. Once it was apparent that nothing was working, I was transferred to a "senior" specialist who indeed knew everything under the sun about networking and Back to My Mac, at least as far as I could tell. We checked various settings on all devices, Airport configurations, iCloud account validity, my network's firewall settings, etc.
Finally, the specialist suggested we check the settings on my home router, which was supplied by my ISP and not an Apple device. I asked him why. He said that if we enabled UP&P and NAT-PM on my home router, that would probably help make the connection. I informed him that while that might be a short-term fix, I travel as part of my job and need to make remote connections to my office, often from places where I have no control over the router settings. He informed me that because of those "variables" I might very well continue to experience connection issues, and that in some locations I would be able to connect, and some, not.
On the heels of all the time and money spent thus far, I was in disbelief. We spent some more time affirming beyond question that he was actually telling me what I thought he was telling me, and I cordially thanked him for his time and we ended the phone support session.
THE STRAIGHT DOPE: I learned from a senior Apple specialist that network and router settings not only have to be just right at the server location but *also* the remote location in order for Back to My Mac to work. Simply having an iCloud ID is not always enough. If you travel, you most likely have no control over router settings at your hotel, coffee shop, etc., and if you rely on remote connections as part of your job, you can't afford to take the chance that wherever you reside might not be BTMM compatible. I signed up for LogMeIn Pro, at a cost of $59.95 a year. It has screen sharing, file sharing *and* iPhone access, which BTMM does not offer. My remote connections are now almost instantaneous and without issue. Problem solved.
Please note, I have no ax to grind with Apple, I enjoy using their products and believe they are superior to Windows machines. I am also more than happy with the level of expertise, courtesy and efficiency of their support people. The Airport Extreme that I purchased is pretty cool, has kickass wireless signal, and has reduced the amount of wiring on my desk thanks to its wireless printing and hard drive capabilities. I feel a little burned that I bought it for no reason, but I have 14 days to return it, no questions asked. We'll see.
In conclusion, Back to My Mac does not seem to work as advertised. I am curious if anyone has had a similar experience. Hope this helps someone or at least, saves you some time.Thanks for your thorough post. I too need to use BTMM on almost a daily basis for my job, and it has fallen short countlness times. I too have taken great pains to check all of the typical trouble shooting steps within iCloud and in the Apple keychain on each Mac etc, but after the latest rounds of system updates from Apple a few weeks ago to Mountain Lion, BTMM on one of my Macs is completely broken and unusable. I would concur that if you need remote access for "real" mission critical use, just bite the bullet and pay for a service like LogMeIn. You won't regret it and you will get real software support.
-
I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.
Are you in the US? Order one from here: http://store.apple.com/us/browse/home/shop_mac/mac_accessories/power?mco=MTM3NjU xNDg
Or check out Best Buy. -
Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1
Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
Please help!!!
Thanks,
PaoloSomewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
Personally I think of all the issues possible its DVDSP vs QT.
Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.
Maybe you are looking for
-
Subsequent acquisition in the first year of life of an asset and ...
Hi all, so I have a problem with asset depreciation values regarding subsequent acquisition. The current setup is the following: APC = 100.000 Acquisiton date = 01.05.2009. Date of first depreciation = 01.06.2009. Monthly value of depreciation = 333,
-
I've got a pict file from photoshop with some text But when i import it in DVDSP3 the text becomes something like muddy. I've looked here on the forum, and i've tried or done: - layers are rasterd - tried all the anti-aliasing options - tried to blur
-
More than one converter per component
hi! I want to set to a component two converters, but, I don't know why, JSF only gets the second converter. Why? I've put the converters with <f:converter> tag. Thanks
-
Why there's no online order for iphone5 at Hong Kong online store?
As of the subject, I just don't understand why we can't order an iphone 5 just like other country can. Everyday I have to go to the website to apply for an iphone 5 reservation and then wait for an email saying you can pick up your iphone 5 on the ne
-
When trying to register for efax, my printer says it cannot connect to the internet. eprint works.
when trying to register for efax on my HP Photosmart 7515, my printer indicates it cannot connect to the internet. The eprint works works great. The wireless network test results indicate connectivity PASS.