Mac OS 10.5.6 downloaded Firefox 3.6.13 Came as .dmg When I try to launch it says "Not Recognized". Right click for "Open With" refers me to Disk Utility when same results "Not Recognized"
About my Mac > G5 Desktop OS 10.5.6
Want to upgrade to Firefox 3.6.13
The download comes as a compressed file in .dmg format. When I attempt to launch the .dmg file to decompress I get a error message that says: The following disk images failed to mount: Image > Firefox 3.6.13 Reason > Not Recognized. When I right click to see what opening app it is directed to it says: Open with "DiskImageMounter (default). Disk Utility is offered as another opening resource when I direct the file to Disk Utility and go to Menu Bar select "File" then select "Open Disk Image" (or Cmd + "O") I get the same result. Have tried downloading the file twice more and get the same results
Vk2mh it sounds like the download was not complete or corrupted. Where are you downloading the update from? Have you tried downloading again?
Similar Messages
-
I have os x 10.6.8. When I try to update it says there are no updates for my system. I want to get iCloud on my Mac Book Pro and one of the requirements is 10.7.2 how can I get this done?
Welcome to the Apple Community.
You can purchase Lion from the Mac App Store. You will need to meet the requirements for Lion, but the Mac App Store will tell you whether your Mac is capable of running Lion or not. -
Well i go to right click a new link to open in a new tab and it don't let me right click it does nothing... it doesn't bring me the drop down...
== This happened ==
Every time Firefox openedHello.
It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem is not disappears when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.
Also, remember that you can simply middle-click any link or interface button to open it in a new tab. Middle-click is the mouse wheel, just press it down. Or the middle button of the mouse, if you have one of those. Of course, there may only be two keys, and middle-click may be impossible, but just so you know, middle-clicking links is the faster way, and how everyone does it, basically. -
I am using a dual processor Power Mac running OS 10.4.11. The version I downloaded says it does not support this system.
Do I need an older version of Firefox?http://www.mozilla.com/en-US/firefox/all-older.html
http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox -
i don't know what's wrong,i've been trying for a while,and i'm not liking it.
Have you checked to see if your machine meets the technical specifications for being able to install Photoshop CS4?
-
I can connect on my computer to the itunes store and it has nothing to do with my wifi! help?
I'm guessing you've got iPod touch 2nd generation
iPod touch 2nd generation only goes up to 4.2.1, so you'll need a newer generation...
iPod touch 3rd generation only goes up to 5.1.1
4th and 5th generation both go up to iOS 6.1.3, wich is the current latest version.
Hope this helps
Stijn -
itunes update would not install due to an error, now itunes won't run and I get this error message when I try to launch itunes: iTunes.exe - Unable to Locate Component "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem."
I'm on a Dell PC running Vista Home Premium.
HELP!!!!!!!!!!!!!!!!!!!try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install. -
I am building a web-site with intit. Today I found out their SiteBuilder software is not Mac compatable. They suggest downloading FireFox. I am running Mac OS X 10.4.11. Is there an older version of FireFox that I can download in order to build my site?
This is the last version of Firefox which will work with PPC Macs. <br/> http://www.mozilla.com/en-US/firefox/all-older.html
-
My Firefox v6.02 browser always open *.csv (comma delimited) file in another tab rather than downloading a file? I do not have right click option to save this file. My OP is windows XP sp2.
Hi mha007,
Go to this site "http://www.nseindia.com/content/indices/ind_histvalues.htm"
Select any Index type and from dates select just one day or any number of days. Click "Get Details" button. This will open tabular data on loaded page (with link CSV file link at bottom).
When I click this link, it opens CSV file in new tab (in Firefox browser) and does not open download window (just as in case of other file formats like *.zip, *.rar or *.xls).
Right-click of link does not give "save as" or "save file" option.
Firefox is my preferred and default browser.
========
surprisingly, When I do same thing in IE6 browser, data-table page shows 2 options below table, i.e. (1) download file (2) open file. -
Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL. However, if I right click on a link and select "Open Link In New Tab", the Tab shows URL in address bar. So it's working when it's a New Tab but not a New Window.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
When I try to save an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!
== This happened ==
Every time Firefox opened
== I updated to one of the firefox versions (Not sure which one it was)Thanks Alex, but sadly I already tried that. Neither .docx or .xlsx files show up in the content list. They both show as a Chrome HTML document so changing how Firefox addresses those doesn't help since it thinks its the same type of file. I don't think I can manually add files into the "Content Type" left side nav.
-
Today I stupidly tried to install CUDA accelerator forgetting I have Intel/AMD combo graphics card and not NVidia. Now when I try to launch AE or PremierePro I get this Last log message was: <140735120521568> <GPUManager> <2> Sniffer Result Code: 3. I have trashed the CUDA program and reinstalled Premiere and AE but no joy. Same message followed by another error box with options to Retry, Send to Apple or ignore. I have tried all 3 options but nothing works! Every time I launch either program same message appears.
Hi? today i too have this problem.
I found a solution here: https://discussions.apple.com/message/25137524#25137524
Now all good.
Good luck! -
firefox keeps crashing when I try to launch it. I uninstalled the program, but now when I try to download it from your website the download freezes with 1 second left. This has happened several times.
Hello Deb,
Something fishy going on with those particular files. But without looking at them directly I couldn't say what. Usually in a case like this the problem is some of the metadata that is attached to the file. Where did these files come from? A camera, a scanner, the internet?
An explanation about the Watched Folder function: It looks for changes to a folder, not just automatically grabbing whatever files are in it. Generally, you want to select an empty folder as a Watch Folder. Once this has been set up, as you add files to this folder they will be imported into the Organizer. If you start with a folder full of images, those will be ignored, any new items will be added.
-Brett -
after I download Itunes, when trying to sync Ipod, message says "needs newer version of mobile support, uninstall Itunes, and reinstall Itunes, and the same process starts all over again. why is that?
Try removing and then reinstalling the Apple software using these instructions.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
The above containes a link for XP. Also. make sure you install the correct Apple software, It comes in 32 and 64 bit and you need the one that is the same as the computer OS -
I'm using Firefox 6 with all current updates. This is on a desktop pc running Windows XP (Service Pack 3).
At some previous time I was able to pin tabs - I pinned three. Lately I do not have a drop-down menu when right clicking on a pinned or unpinned tab. The feature is just not there.Try the Firefox SafeMode. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
Maybe you are looking for
-
The method Windows.Networking.BackgroundTransfer.BackgroundDownloader.getCurrentDownloadsAsync() will consistently error out for me. To repro this: Start a bunch of (preferably large) download operations using the BackgroundDownloader. Wait for a
-
No import post 10.5.5 - Canon 350D
G'Day. Same as topic. I updated to the latest OSX, and can no longer import. Might be a co-incidence, but the update was meant to add new Camera compatibility - so maybe it killed old compatibility? Symptoms:- Open iPhoto, fire up camera, camera neve
-
Installed latest update and now cannot get email
I installed the latest update to Maverik and now cannot get ICloud to go online.
-
PLSQL Practice-----Please help!!!
Hi, I'm a beginner for the PLSQL. if someone give me some tips, It's really helpful for me. There two table. Table A (Transaction table : keep coming a rows) A_id B 111 aaa,bbb,ccc 222 yyy,ss,ccc 333 sss,yyy,ddd Table B (Fixed code table) X_id Y xxx
-
ResultSet changes lost after changing cursor position
Hi - The rowUpdated method seems to always return false even after applying valid updates to a resultset object. The database row can be updated with the changes immediately but if i don't update before moving to a different row in the cursor the cha