Mac OS 10.5 - Package unavailable on peer

I have AnyConnect client version v2.2 - when I connect I get the message AnyConnect package unavailable on the peer. (It does authenticate me, b/c if I enter an incorrect password I get password failure.) Once connected the message comes up and then the only option is to disconnect.
I can connect just fine using the Windows client (v2.1)
Thanks

Hello, were you able to resolve this issue? I'm having the same problem on OS 10.4 with Anyconnect 2.2.
Thanks

Similar Messages

  • Mac OS X Mountain Lion unavailable for download in Nigeria Apple Store.

    My Apple ID is logged into Nigeria Apple Store but Apple says MAC OS X Mountain Lion is unavailable for download.....please advise.

    Thanks for the interest Dah*veed, much appreciated.  However, as you rightly mentioned, I'd successfully purchased the Mt Lion from  Nigeria MAS but paused the download due to low  speed. I'm currently in Europe hoping to resume  download, ONLY to  get the error "...... Mt Lion not available in Nigeria MAS".  I  tried to get the download going without any luck.  Kindly let me know what other options are there, if any.  Thank you.

  • Mac os update keeps getting interrupted by peer

    just bought a refurbished imac with snow leopard version 10.6.4 on it. tried updating the OS to 10.6.7 but it keeps quitting and says download interrupted by peer.
    how can download the update without that error happening?
    thanks
    jim

    Download the combo update from http://support.apple.com/kb/DL1361. Before running it, bring up Disk Utility (on your hard drive in applications/utilities) and repair permissions. Apply the combo update, then repair permissions again afterwards. The combo update contains all prior updates in one package.

  • Mac + PSE 3 + Picture package?

    I have been trying to follow Scott Kelby's Elements 3 book to create a pict. package. I would like to put at least 2 different pictures into 1 package. Is this one of the componets to PSE 3 that is only available to PC users?
    Does anyone know how to do this on a MAC?
    Thanks much,
    Ginger

    Ok--I got 2 different pictures on an 8 1/2 x 11 paper. In pp I chose to print 2 5x7 picts. from these. What I got was 2 picts--the ones I chose, however size wise they are 2x3, and 2 1/4x2 1/2. So, what did I do to not get the 2 5x7's.
    This is has become very expensive to do this--and I am very frustrated with it.
    Any help is greatly appreciated. I did print out the help portion of PSE.
    Oh--I also get the following message when I chose photos from iPhoto to put on these layouts...."With folder as the source, you cannot use all custom files. There is no place to put the files from the folder on the layout." What does all that mean besides my pictures don't appear when I want to print?
    Thanks again,
    Ginger

  • Mac App Store : 503 Service unavailable

    Hi,
    Wenn I try to update a software in the Mac App Store, the server generate the error "503 Service unavailable" while trying to download.
    Has some body an explanation to this problem ?
    I've already tried to logout, reboot, sign out/in, ... but it doesn't help
    Thx !

  • Packages unavailable from mirrors

    Hi,
    Until yesterday I was an Ubuntu user but today I installed Arch Linux. It went very well until I tried to install KDE. When pacman is trying to download the necessary packages for KDE, it successfully downloads all but:
    * soprano-2.1.67-1-i686.pkg.tar.gz
    * mysql-5.0.75-3.i686.pkg.tar.gz
    * system-config-printer-1.1.1-2-i686.pkg.tar.gz
    At first I only used the belnet (Belgium) mirror so I thought maybe it was due to the fact that it wasn't synchronized with the other mirrors or something like that. However, I added all the servers located in USA and Europe to /etc/pacman.d/mirrorlist and none of them has those packages. They all say something similar to
    "error: failed retrieving file 'system-config-printer-1.1.1-2-i686.pkg.tar.gz' from ftp.hosteurope.de : File unavailable (e.g., file not found, no access)."
    I reinstalled pacman, did about 30 times "pacman -Syy" but nonetheless he can't find the packages. What is the problem?
    Hope someone can help me,
    Yoran

    They all seem to be on the server you linked.  You could download them individually and install them with pacman -U <pkgname>:
    ftp://ftp.hosteurope.de/mirror/ftp.arch … pkg.tar.gz
    ftp://ftp.hosteurope.de/mirror/ftp.arch … pkg.tar.gz
    ftp://ftp.hosteurope.de/mirror/ftp.arch … pkg.tar.gz
    Last edited by SkonesMickLoud (2009-02-01 18:51:02)

  • Mac Mail attributes grayed out - unavailable

    I've been trying to alter the display for mail in my new Macbook Air to display whether or not it has attachments and find that mail attributes for all my mail folders are grayed out, except for date and folder.  How can I get those attributes back? Why are they grayed out in the new version of Mac Mail?

    Try this work around.
    Open Mail,   not  in Full screen mode.  You need  to be in classic lay-out.
    < Command - , > to open preferences if you need to switch
    Then from here <control-click> anywhere in the column area to make additions to the column
    revert back to the new 3 column view.  If you loose one of the columns grab one of the vertical sides and drag it to resize.

  • Packaging App for MAC with no MAC to build from

    I have a JavaFX app that I hope is cross Platform. Works great in windows, and I am testing on Ubuntu.
    I have users BEGGING me for a MAC version, but I don't have a 64bit MAC to package it on.
    The users have downloaded JDK7u9. Looking for suggestions - what do I need to do to 'build' something they can use on the MAC. How to package, what scripts I need to include.
    What does a non-native 'package' look like for a MAC?

    What does a non-native 'package' look like for a MAC?It's the jar file from the javafxpackager deploy task.
    If Oracle jdk7u9 is already installed, double clicking on the jar file will run the app.
    If you have additional jars to your main application jar, include them in a zip file. The user can unzip the your zip file, then double click on your main application jar to run.
    There are also other alternate methods for app delivery of a "non-native" on the Mac, such as using WebStart or a browser embedded app. See the deployment guide for details: http://docs.oracle.com/javafx/2/deployment/jfxpub-deployment.htm
    I don't have a 64bit MAC to package it on.If somebody offers, you could send a project to a forum member with a Mac and they could create a native package of it for you.

  • How to select .app application package itself on Mac?

    Since IOpenFileDialog in CS6 does not support SetNavDlgOpFlags() anymore, I was forced to use AddCustomMenu().
    But I could not find a solution or sample to select a Mac OS X application package (.app folder). This Open dialog just shows all the contents of .app package.
      openFileDialog->AddCustomMenu(filetypeString, 'APPL');
    Tried AddExtension("app") before calling AddCustomMenu() but it doesn't seem to work.
    Any suggestion to select .app package itself without showing all its contents ?
    Thanks

    Hi Martin...
    Launch iTunes with your iPad connected to your computer. Select iTunes Store on the left then click Apps from the menu.
    There are a variety of magazine apps available there. I like Zinio.
    Click here.
    http://itunes.apple.com/us/app/zinio-magazine-newsstand-reader/id364297166?mt=8
    All the apps for your iPad are managed in iTunes. If you need more help, here's a link to the iPad forum where you can post for help there.
    http://discussions.apple.com/category.jspa?categoryID=267
    Carolyn

  • Problems with Adobe Creative Cloud Packager

    Hello Community
    I have a problem with the Creative cloud packager.
    i can pakage fine but when i try to install the package on another mac it simply says installation failed after a few minutes, i can see it installs Adobe Bridge in the launchpad but nothing more.
    The package includes Photoshop , Bridge, Muse, Premiere, Illustrator, Indesign, After Effects,l Dreamweaver, incopy, lightroom,
    The install works fine if i try to install it on the mac i made the package with
    The mac im trying to install on is a imac 27 " 5K osx 10.10

    Hi KwKn,
    Does it work on the machine on which you are creating the package?
    Do you have any security software running on the machine?
    Also I would request you to go through the below link.
    Creative Cloud Help | Packager
    Regards,
    Anand

  • Mac Mini with DVI to video adapter REFUSES to display on TV!! Please help!!

    I purchased an apple DVI to Video adapter - which says for Mac mini and power mac G5 on the package. However not matter what I do, I can't get a picture on my TV, I have tried on 2 TV's and I get nothing but blank screen on both, with occassional grey flicking.
    I thought maybe the adapter was faulty so had it changed, the new one shows the exact same behaviour. I have started up in safe mode, with the TV connected and still nothing, I have reset the PRAM and still nothing. Trashed the windowserver plists - and still nothing!!
    I have searched through the forums as much as I can and can't find any answers.
    Someone please help me out and tell me what I'm doing wrong.
    Thanks very much.
    Naj

    Hi Thesserax,
    Thanks for your reply, however I have already tried your suggestions - my tv's do not let me switch manually between PAL/NTSC, and I am definately on the correct channel.
    I also tried connecting it to the TV and VNC'ing into it to try to change the resolution, however I although I see the correct CRT resolution opions i.e. 800x600 and 1024x768 only, I notice that I don't see any tv specific options such as overscan, and that the rates are stuck at 60Hz (NSTC) - I am in europe so the tv is PAL 50Hz and the adapter is also labelled PAL.
    Any other ideas, please?
    Thank you

  • Why does Indesign say I have missing fonts even though they are in my packaged document?

    I use CS4 on my pc at work, and always package my files, as I have always done on my mac at home, to keep the links and fonts together so that when I send someone a folder, all of the fonts and images work.  For some reason, the packaged graphic designs (created on a mac) that are being sent to us from our graphic designer, all of my fonts are lost - even after having purchased the main one that we use - Gotham - to prevent this from happening.  This also occurs with any designs that I package and send out to others in our office.  I always have to relink the Gotham fonts, and I cannot retrieve the formatting for the fonts that we don't have, even though they are packaged. 
    We are considering purchasing a mac for me to use in the office, but I'd like to make sure that it is not user error before we proceed.
    Any ideas would be wonderful.  I never had this problem with my mac at home with packaging, and it has me confused and frustrated at work.
    Thanks!

    Since CS6 is the current release, upgrading to CS5 is a near impossibility, and EVERYONE will need to upgrade in lockstep or you'll be worse off than you are now with users of your newer version creating files that cannot be opened by users of CS4 (and your CS4 packages won't automatically install the fonts in the documents in the later versions without manually changing the names of the packaged fonts folders).
    As far as font formats, if you are going to collaborate cross-platform, the font of choice is OpenType, which is 100% cross-platform compatible, and second choice is Windows TrueType which also can be installed on Mac OS X (so, essentially, also cross-platform). Last choice would be to use Windows Type1 which can be installed in the private InDesign Fonts folder in the Mac applications folder and will work in ID, but nowhere else. Any of these would allow everyone to use the same fonts, presuming you all purchase the same versions. Purchasing Windows versions and Mac versions of the same font usually works, but there may be little surprises, and you probbly don't want that.

  • Is there a script to "Package" more that 1 file at a time?

    I am trying to find a way to Batch Processing groups of Illustrator files (version Mac CC 14) into Packages (separate folders with links). The new "packaged" folders in a new location then need to be compressed (zip) before uploading for client access. The biggest issue we have is some jobs can have up to 20+ different varieties - each needing its own package. Is there a script available to avoid opening each file and manually applying "Package" from the file menu?

    I main issue I have with the Illustrator Action I created is that the "save" feature holds the file name which means every time we run the action, the package is called the same thing (not the title in the header!) For some strange reason, Photoshop actions are a lot more flexible. It would be nice if Illustrator worked the same way. (or even through Adobe Bridge!) I am running a trial of the "Art Files" Plug in now to see if this meets out needs. Many thanks for your assistance.

  • How to Batch "Package" more that 1 file at a time?

    As part of out new Digital Asset Management (DAM) system we are trying to find a way of Batch Processing groups of Illustrator files (version Mac CC 14) into Packages (separate folders with links). The new "packaged" folders in a new location then need to be compressed (zip) before uploading for client access. The biggest issue we have is some jobs can have up to 20+ different varieties - each needing its own package. Is there a method to avoid opening each file and manually applying "Package" from the file menu?
    Many thanks in advance for any assistance.

    Thanks Mylenium
    I have tried a test a bunch of dummy files to see how they would process by using an Action, and yes there is not enough flexibility in the save file/folder section because it saves the file name as part of the action... which is kind of pointless for and tasks that is repeated. (ie different file names). I have been looking for an existing script somewhere. I can't be the first user to face this problem. My hope would be that there would be a solution like the one that Photoshop uses. (File/Automate/Batch). Seems strange that Illustrator can't do the same thing!

  • IPod Shuffle Windows or Mac formatted?

    I just got an iPod shuffle (2nd generation). It wont appear in ITunes. It's not any of the obvious errors listed and the 5 steps doesn't help. I've reset it several times. When I went to run the iPod updater it claims it is a Windows formatted iPod Shuffle and that the updater is for Mac only. The packaging doesn't have any description of it being a Windows only iPod! Can it be reformatted as a Mac iPod? If I don't have iTunes open the Shuffle will load as a disk drive in the finder but not as an iPod. Can anyone help me get my Shuffle to work? Cheers.

    iPod formatted on a PC can be read by a Mac computer but not the other way round.
    So your iPod of course can be restored or formated on a Mac computer.
    I am not too sure, it can be a bad contact between the cable plug with your iPod causing the problem. Otherwise, see doing the following helps
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”

Maybe you are looking for