Mac OS 10.6.4 Update/Download Issue

I just got a new Macbook and of course the software update had a lot of updates it that needed to run. Including Mac OS 10.6.4 and Safari 5.0.1. I tried downloading them and my connection got lost in the middle of the download. I tried the download again and everything jamed up. So I went to the library and cleared out the update file and everything else was cleared and didn't say partial downloads on the Update Software screen. All of those I got downloaded and updated just fine. The only ones I can't get to work are Mac OX 10.6.4 and Safari 5.0.1 They are still saying they are partially downloaded and when I try to re download they just jam up. Can someone tell me where these updates are being downloaded to so I can go in and clear them out and start the download fresh? Thanks

Download and install the combo update from here:
_http://support.apple.com/kb/DL1048_
Of course when I suggest that, I assume you have some sort of high speed internet available to you?
Joe
Message was edited by: joeuu

Similar Messages

Mac OS 10.6.8 update download error

I have a brand new MacBook Pro and was looking forward to installing Lion but I have to update from 10.6.7 to 10.6.8 first. I went to Software Update and the download progress bar went all the way to the end at which point I got a "Mac OS 10.6.8 download error." It said there were problems connecting to the download server. The other 5 updates that the Software Updater app found that I could use downloaded and updated just fine. I tried restarting and re-updating but get the same error. What's going on? How do I fix this? Thanks.

My other updates did not update either. I do the download - OR TRY TO DO THE DOWNLOAD - after several minutes of what seems to be downloading... then it asks - "Would you like to install these downloads?" I click Yes. It begins to do something - and after a few minutes it says - "Error - problems ocurred while connecting to the download server." By not doing these updates I know this is what is slowing my down computer and sometimes making it down right stagnant like a PC. I sometimes have to click on the same thing four or five times to get it to do the function. I have been getting this message all week. I have 8 updates that need to be completed and I am using 10.6.8 Mac OS.
ANY HELP WOULD BE APPRECIATED!!! I am frustrated! My husbands PC laptop is in the shop - for the 5 or 6th time. I had almost convinced him to go Mac... I need this work RIGHT!

Dial Up Update Download Issue

High speed internet access is unavailble in my area. I can't download the updates for Tiger after just installing Tiger on my new hard drive. The Update files are too large and I get kicked off. Is there an alternative download broken up into smaller files? What other optons are there for me?

This is what I use
http://www.budgetlinuxcds.com/ -- use their world on a cd service, just give them a url and they will burn and mail it to you, $5 for a CD, $10 for a DVD
no affiliation, just a happy customer
Mac Mini Mac OS X (10.4.1)
Mac Mini Mac OS X (10.4.8)
Mac Mini G4 Mac OS X (10.4.8)

Updater Download Issue

I got my new iPod nano a few days ago and saw that the updater was old compared to the one on the net. I have a problem with the updater, the download is 45.5 MB I only have a dial up connection and downloading something that big is quite an issue for me.
I'm assuming that the updater has the latest version of iTunes in it as well. I already have the latest version of iTunes installed in my PC and don't want to go through downloading it all over again for nothing, so I was wondering if the updater was available alone and not with iTunes?
Of course if the updater doesn't have iTunes with it then I guess this post is meaningles...

Hello.
Me too i have the beloved dial-up connection, and it took me 4 hours to downlaod itunes...so guess how long it would take for the updater!
one solution thati have fund, might be a bit incovinient, but fast, is to go to one of your relatives or friends that has high speed. Tak your PC with you, and plug it their, on their screen, and their internet stuff. put the cable-connection thing on your PC, and you should be able to have high speed on your computer. Now downlaod whatever you want, including the ipod update rof cours, aand everything is fine. go back home, and put the updater in your ipod!
Chris

WDK 8.1 update download issue and integration problem with VS Express 2013

I have VS Express 2013 in my machine and want to download the WDK 8.1 Update. However, I am facing two issues:
1. The download site says : "You have to register for downloading. Click on continue to register and download". On doing so it asks for what I want to download. Then it redirects to the page saying "Thank You for downloading". However,
it has been more than 10 times since yesterday and yet no file has popped up for download. It is the same problem with other machines.
2. On installing WDK 8.1 from softonic, it has created a separate folder and shows no way for its integration with VS express 2013. I do not get any "Windows driver functionalities" in VS Express 2013.
Could somebody point me where I am wrong.
Thank You in advance

Hi codeahead,
About this (1) issue, could you please tell me where you download the WDK 8.1 Update?
Generally, I know that we can download the WDK 8.1 Update from the following Microsoft Official site.
http://www.microsoft.com/en-us/download/details.aspx?id=42273
So please you check if you download the WDK 8.1 Update from the above link.
(1) If no, please try to download this WDK 8.1 Update from the above link check this issue.
(2) If yes, could you please tell me if you register a life user account from this Microsoft?
Generally, I know that when we download some software from this Microsoft site, we will need to register a life user account.
So please check if you have a life user account from this Microsoft site.
However, as you said about the (2) issue. Since it is related to install the WDK 8.1 with VS2013 Express. Since I am not the VS Install experts, so I suggest you can post this issue directly to this VS Install forum:https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup
, you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Help With Quicktime Update Download Issue?....No DMG format? Only Windows?

I just got the new Final Cut Studio updates, but when I tried to install them for FCS 2, it asks for the 7.3 Quicktime? When I went to the Support section for downloads and tried to download for OS X, its only gave me the option to download for Windows XP? or Vista? I need a link to one of the proper pages to download the QT DMG 7.3, please help? Thank You Tim C.

Apple uses a "browser detect" to determine what type of OS is being used and redirects to that version download page. If you're using Windows to visit you'll only see the Windows download.

Has anyone experienced an update download issue (42) with Illustrator CC (2014)?

Abode Creative Cloud has been bugging me to update for a couple of weeks so I succumbed this morning.
The first part was the Creative Cloud App which succeeded after failing a couple of days ago.
I then clicked the install for the following in this order as they showed:
Photoshop CC (2014) Successful
Illustrator Cc (2014) Failed
Premiere Pro CC (2014) Failed
Dreamweaver CC (2014) Successful
Media Encoder CC (2014) Successful
SpeedGrade CC (2014) Failed
That works out to 50%. Impressive!
Anyway when I tried the "retry" as suggested "total failure".
I tried again, by first closing the Creative Cloud App and reopening, but those 3 Apps still came up with the fail message and "Retry" button.
I sure hope the Illustrator and Premiere Pro keep working for me until this mess has been sorted out; because I sure pay enough for the privilege.
Once again Adobe CC has met my expectations!

As the song goes ... "What a difference a day made Twenty-four little hours ... "
When I booted up my system this morning, I opened the Creative Cloud App and the "Retry" buttons had gone to be replaced with the usual clue "Install" buttons.
Closing the Creative Cloud App yesterday did not have this affect, and it would appear my system had to be rebooted to reset the "Retry" buttons.
I decided to click on one and allow it too update, before clicking on the next; although the App is designed that you can click on multiples and it will queue them.
I believe yesterday's issue was a Creative Cloud App issue, although it did queue and update the other three updates without a problem.
In the future I will likely not queue updates but do them one at a time just to see if my Creative Cloud experience improves.

Ipod update download issue

i am downloading the latest ipod update and during the download a message came up and said that there was a connection error and now its downloaded 180.7 MB out of 165 MB so far and the progress bar is extending over the stop button. is there something wrong with the file?

you get it from here...
http://www.apple.com/support/downloads/ipodupdater20050906.html
note that it does not add screen lock to previous models, this 'update' only adds support for the ipod nano, it is otherwise identical to the ipod updater released almost three months ago

Newbie to Mac - Quick Time 7.5.5 download issue - be gentle

I have just got an iMac and was looking to Quick Time - I was directed to download the software which i have now done 3 times. I have looked in here at hundreds of posts but cannot see the same thing.
It appears to have installed ok (I think) but when I go to open it ...after the first page I get an message which says 'switching' and it goes to an Apple Quick Time page with itunes, top picks, movies on it, which in turn then takes me to the Apple store -this is not what i was expecting and I cannot get the player to open as it used to on my laptop using Xp...
It will be something dumb I realize but what??
Thanks

I said I was being dumb - now I get it...it does open but I have tried this url which I am assured works but I get a message noting url is not valid - does the open url box always come up with movie url as this is for a radio station? Or am I being dumb again???
http://tx.sharp-stream.com/tune.php?c=planetrock&.wax

Downloading issue after updating Mac OS X Tiger 10.4.9

I got an information about there're new versions for iturns, safari, Quick Time, Mac OS X, so I clicked the "update" for all. But after updating, I found the speed of downloading softwares from internet become so slow-more than 30 times slower! I don't know whether this problem is because of the system updating from my original 10.4.9, or other reasons?

That's a lot of updates to digest all at once.
There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.

Are yo having any issues with mac os x the latest update heres the fix

ok a lot of people have had issues with installing the update via the software update option in mac os x tiger now let me explain something first it is not apples fault they did not expect that tons of people would be downloading this update at once which caused problems
some of the issues people have run into are
1.the cd rom after the update the superdrive or regular super drive will not read cds
2.your photoshop application stops working or any adobe product stops working
now the simple fix is this
go online to apple.com select the download section in the support area of this web page once this is done
go and download the update manually and run the update manually this will correct any issues with the update including cd rom drive errors and even adobe product errors

ok a lot of people have had issues with installing
the update via the software update option in mac os x
tiger now let me explain something first it is not
apples fault they did not expect that tons of people
would be downloading this update at once which caused
problems
Since Apple know exactly how many systems are out there, have experienced download demands from previous update releases, they very clearly know the kind of demand there will be when a new update for MacOS is released. The issues with Software Update are nothing to do with this - and indeed, historically there have always appeared to be a small proportion of systems that have not functioned correctly with a MacOS update - a quick perusal of MacFixit going back some years would evidence the fact.
When Software Update downloads the wrong components, it's not volume of traffic that causes it, but that when Software Update examines the specific system, it finds components that cause it to misidentify it.
some of the issues people have run into are
1.the cd rom after the update the superdrive or
regular super drive will not read cds
2.your photoshop application stops working or any
adobe product stops working
There are many reasons users may suffer these, and similar (and very DISsimilar) issues, not just from the update itself, but prebinding, permissions, system caches, font files, plists....
now the simple fix is this
go online to apple.com select the download section in
the support area of this web page once this is done
go and download the update manually and run the
update manually this will correct any issues with the
update including cd rom drive errors and even adobe
product errors
You omitted to mention WHICH update file to download - which is the critical part of the advice. Users who experience problems with the update as downloaded by Software Update, should download the 10.4.8 'Combi' update file from the apple/support/downloads page. The combi (combined) update contains the entire thing, not just the bits tailored to what Software Update takes to be the specific system. There are two versions of this file - one for PPC systems and one for Intel - it's important of course to select the correct one for the type of system, being used.
People often say that the Combi update fixes their problem when in fact what may well be happening is that by installing the combi update version, it overwrites faulty files (plists for example) that had caused the problem the user experienced. Installing this version of the update can certainly RESOLVE these kind of problems, but is not the only way to do so.
Simple and easy when it works - undoubtedly so.

Mac OS 10.4.6 Update and Palm Hand Held Issues

Recently I installed the Mac OS 10.4.6 update after confirming that it should improve some minor issues with "Hot Synching".
Previously I could "Hot Synch" with my Palm Mac Desk Top software 4.2.1 and also with my PC with no issues.
I noticed now I can "Hot Sync" on my Mac--with no issues. However, when I take the Palm out of the USB Cradel and try to access the Palm Display page with the featured icons, I get a very unusual error:
"Application can not be launched because it is missing localization info file xxx--enUS.prc."
I checked the Palm site and entered the error message and the response was returned that indicated "several applications with the Palm Tungsten T require overlay files to run properly. "Dialer, SMS, & WAP Browser" require and overlay "prc" file that determines which language he application displays on the device. If this "prc" file is missing, it will cause this message to be displayed."
I was instructed to install the "xxx_enUS.prc" using the Palm Install tool.
I installed all of the "xxx_enUS.prc" files on Disk 2 and have performed a "Hot Sync" again. A successful "Hot Synch" was performed.
The above message is still displayed on the Palm screen even after that successful "Hot Synch".
I can not use any of the screen icons to select any of the features or vprograms on the Palm.
The face buttons can be depressed but the selection from the Palm hand held icons with the stylus can not be accessed as the "missing localization info, ect" is displayed.
I have performed soft resets to no avail.
I still can not get this issues resolved.
Anyone out there have any suggestions.
POWER MAC G-4 (933 MHz QuickSilver) Mac OS X (10.4.5) iSite

I don't use the synch. option. However, my RSS feeds are updating without problem after the update. If I remember correctly, the RSS feed update was affected by synching through .Mac? Is that true?
What method did you use to update your system. As a rule, I use the combo update. If you used the incremental method, I suggest using the combo update. Remember to repair permissions via Disk Utility after the update.

Software Updates ADR Issue: "Failed to download the update from the internet. Error = 5"

"Failed to download the update from internet. Error = 5"
The above is the error I am getting when running any ADR. The error is quite clear software updates are failing to download and Error = 5 being a permissions error its clear that the downloads are failing due to incorrect permissions applied to the download
path.
Here is the last bit of my ruleengine.log, everything above is the same except for the update trying to be downloaded of course:
Failed to download the update from internet. Error = 5
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Failed to download ContentID 16860969 for UpdateID 16857152. Error code = 5
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Downloading contents (count = 1) for UpdateID 16857255
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
List of update content(s) which match the content rule criteria = {16861141}
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Downloading content with ID 16861141 in the package
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Failed to download the update from internet. Error = 5
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Failed to download ContentID 16861141 for UpdateID 16857255. Error code = 5
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Failed to download any update SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Failed to download update contents. SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
No new update was added to the package. Package "SCP0008A" would not be updated.
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Failed to run the DownloadAction for the AutoDeployment.
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
STATMSG: ID=8706 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_RULE_ENGINE" SYS=SCCM-MPS.DSCICORP.COM SITE=SCP PID=2376 TID=5148 GMTDATE=Thu Jun 26 13:22:00.164 2014 ISTR0="SMS Rule Engine" ISTR1="Failed to download one or more
content files" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Enforcing Create Deployment Action SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Create Deployment Rule Action XML is: <DeploymentCreationActionXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><CollectionId>SCP00055</CollectionId><IncludeSub>true</IncludeSub><Utc>false</Utc><Duration>0</Duration><DurationUnits>Hours</DurationUnits><AvailableDeltaDuration>0</AvailableDeltaDuration><AvailableDeltaDurationUnits>Hours</AvailableDeltaDurationUnits><SuppressServers>Checked</SuppressServers><SuppressWorkstations>Unchecked</SuppressWorkstations><PersistOnWriteFilterDevices>Unchecked</PersistOnWriteFilterDevices><AllowRestart>true</AllowRestart><DisableMomAlert>false</DisableMomAlert><GenerateMomAlert>false</GenerateMomAlert><UseRemoteDP>true</UseRemoteDP><UseUnprotectedDP>true</UseUnprotectedDP><UseBranchCache>true</UseBranchCache><EnableDeployment>true</EnableDeployment><EnableWakeOnLan>true</EnableWakeOnLan><AllowDownloadOutSW>false</AllowDownloadOutSW><AllowInstallOutSW>true</AllowInstallOutSW><EnableAlert>true</EnableAlert><AlertThresholdPercentage>90</AlertThresholdPercentage><AlertDuration>7</AlertDuration><AlertDurationUnits>Days</AlertDurationUnits><EnableNAPEnforcement>false</EnableNAPEnforcement><UserNotificationOption>DisplaySoftwareCenterOnly</UserNotificationOption><LimitStateMessageVerbosity>false</LimitStateMessageVerbosity><StateMessageVerbosity>10</StateMessageVerbosity><AllowWUMU>true</AllowWUMU><AllowUseMeteredNetwork>true</AllowUseMeteredNetwork></DeploymentCreationActionXML>
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Rule XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Test ADR</DeploymentName><DeploymentDescription>Test ADR</DeploymentDescription><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Criteria Filter Result XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Test ADR</DeploymentName><DeploymentDescription>Test
ADR</DeploymentDescription><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Parsing Deployment Action XML...
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Parsing Rule XML... SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Could not find element DeploymentId SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Could not find element UpdateGroupId SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Could not find element UpdateGroupName SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
SQL is: select cis.CI_ID from vCI_ConfigurationItems cis join vProvisionedCIs pci on cis.CI_ID = pci.CI_ID where cis.CI_ID in (16793068, 16793070, 16793441, 16793445, 16793531, 16793686, 16793688, 16794597, 16794600, 16794602, 16794604, 16795443,
16795445, 16795709, 16795711, 16796210, 16796222, 16796292, 16796298, 16799495, 16799503, 16799602, 16799700, 16799703, 16799705, 16799712, 16799718, 16800300, 16800302, 16800367, 16800369, 16800371, 16800375, 16801224, 16801227, 16801237, 16801239, 16801287,
16801289, 16801559, 16801566, 16801996, 16802034, 16802839, 16802841, 16803306, 16803310, 16803420, 16803422, 16806477, 16806479, 16809354, 16809360, 16809393, 16809397, 16809774, 16809786, 16809792, 16813338, 16813348, 16813636, 16813638, 16814948, 16814950,
16815151, 16815153, 16817088, 16817102, 16817108, 16817398, 16817400, 16818677, 16818691, 16825397, 16840448, 16840458, 16840460, 16840462, 16840690, 16840700, 16840702, 16840710, 16840824, 16840826, 16842640, 16842641, 16842802, 16842803, 16842841, 16842870,
16842871, 16842896, 16842917, 16843017, 16843042, 16843049, 16843051, 16845981, 16846404, 16846751, 16846757, 16848017, 16848021, 16848664, 16848687, 16849383, 16849385, 16852506, 16852514, 16852516, 16855484, 16857102, 16857151, 16857152, 16857255) order
by cis.CI_ID SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
0 of 115 updates are downloaded and will be added to the Deployment.
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
The rule resulted in no updates being found. Skip deployment creation or update...
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
CRuleHandler: Enforcing Actions for Rule 16777228 failed!
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
CRuleHandler: ResetRulesAndCleanUp() SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Updated Failure Information for Rule: 16777228
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
CRuleHandler: Deleting Rule 16777228 SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Found notification file C:\Program Files\Microsoft Configuration Manager\inboxes\RuleEngine.box\16777228.RUL
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5148 (0x141C)
RuleSchedulerThred: Change in Rules Object Signalled.
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
Refreshed ScheduleList instance for Rule (16777228) from schedule string () with next occurence (12/31/1969 7:00:00 PM)
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
FindNextEventTime found next event for RuleID 0 as :1/1/2038 12:00:00 AM
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
RuleEngine: Got next rule execution time successfully. Next event is in 12369097 minutes
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
Sleeping for 15 minutes SMS_RULE_ENGINE
6/26/2014 9:22:10 AM 5228 (0x146C)
Also, I do not have a patchdownloader.log anywhere, Ive checked all aforementioned locations from various sources and it just simply does not exist on my SCCM server. Here is my setup:
Server1: Primary server with all roles installed locally except the site database is on its own server. WSUS is installed locally here and DB is stored here.
Server2: SQL DB for Primary site DB
Server3: Secondary remote site running MP, DP, SUP. DB is SQL Express local.
So the SUP role was installed successfully on both server1 first and server 2 second with the site servers accounts. The SUP Synchronizes successfully and I can see a large list of updates available for use but not downloaded of course. I have set WSUS option
to store updates locally and have plenty of space at the target destination.
So here is my issue, I have been working on this issue for the better part of a week and understand the error code from the ruleengine.log to be a permissions issue. I have also proved this out but creating a test ADR with minimal updates and applied NTFS perms
to the target path for Modify with the everyone group (testing purposes only). The updates downloaded successfully. So this puts me right back to where I was, knowing its a permissions issue but not understanding what permissions are needed. Let me explain
further.
The best way to start is to show what perms I have to the target location for downloads/wsus/sup anything:
Path: \\Server1\UpdatesAndDefinitions (permissions being applied to the UpdatesAndDefinitions root folder)
SCCMAdmin (account used for most SCCM tasks except for NA) / Modify / Share and NTFS
Server1$ (primary site server) / Modify / NTFS
Everyone / read and execute / NTFS and Share
There are other system generated perms but the above three are the important ones. So hence my confusion I know that the SCCMAdmin account or the Server its self has to be accessing the target directory so why is it failing with a permissions issue?
My next step was to enable Auditing on the target path. Doing so revealed just what I thought and through me into further frustration:
A network share object was accessed.
Subject:
Security ID:
SYSTEM
Account Name:
SCCM-MPS$
Account Domain:
DSCI
Logon ID:
0x3e7
Network Information:
Source Address:
fe80::306a:8827:8672:3ba5
Source Port:
50329
Share Name: \\*\UpdatesAndDefinitions
A handle to an object was requested.
Subject:
Security ID:
DSCI\sccmadmin
Account Name:
sccmadmin
Account Domain:
DSCI
Logon ID:
0xad903c
Object:
Object Server:
Security
Object Type:
File
Object Name:
F:\UpdatesAndDefinitions
Handle ID:
0xf5c
Process Information:
Process ID:
0x10cc
Process Name:
C:\Windows\explorer.exe
Access Request Information:
Transaction ID:
{00000000-0000-0000-0000-000000000000}
Accesses:
READ_CONTROL
ReadAttributes
Access Mask:
0x20080
Privileges Used for Access Check:
Restricted SID Count:
0
Now I may not be the best I traversing through the mess of audit entry's and translating them, but from what I can see the two accounts that have the proper share and ntsf perms ive listed above are indeed the ones accessing the target location and the audit
code is success. I filter for failures and found no audits for failures whatsoever yet my downloads still fail religiously, unless of course I open myself up with the everyone group.
So next... I tried adding in the Network Service account with proper permissions, the Local Service Account, my user account, and all no go's.
Next... I remove the SUP roles from SCCM checked the logs for deinstall confirmations, and reinstalled these roles. No Go!
If anyone can assist I would be in your debt and very grateful.
Oh last note, but very important note I'm running SCCM 2012 SP1 CU4
Thanks,
Michael
MichaelSpaulding

I just tested with the everyone group further; I added everyone with modify for ntfs and just read only for share and downloads failed!
I then changed the share perms for everyone to change and the ntfs to read/execute and poof downloads complete! Obviously change share perms for everyone leaves me open which Id like to prevent, so finding what account is being used is crucial.
I have already tried adding all of the SCCM accounts I use and the servers themselves as change perms to share and ntfs and have not had any luck.
MichaelSpaulding

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration...

I have an Apple iphone 4s and for the last 4 weeks I cannot download or update any apps. I have an iPad and a Mac book pro and the apps download on these devices fine. My phone tells me that I have 12 updates but when I press update all or update any indi

I have an Apple iphone 4s and for the last 4 weeks I cannot download or update any apps. I have an iPad and a Mac book pro and the apps download on these devices fine. My phone tells me that I have 12 updates but when I press update all or update any individually nothing happens at all. It also does not ask me for my password any more but my iPad and mac book do.
I have signed in and out of the app store and the password is correct. I have tried both kinds of reboot but that did nothing. I have tried to update the apps by connecting phone to Mac book pro...it shows the apps being download on the Mac book and says it will sync them to my phone but it does not. Everything else on my phone works fine.
Any ideas ...Please!

Thank you, this has resolved both the iphone and ipad problem immediately. I am concerned that I may have a problem with apps that I bought under my old AppleID as they will not be recognised. Any suggestions for this please?

Mac OS 10.6.4 Update/Download Issue

Similar Messages

Maybe you are looking for