Mac OS 10.6 not supported by the CinemaDNG importer

Just a heads-up to anyone downloading the CinemaDNG Importer - at this time, the importer will not work with Premiere Pro CS4 on Mac OS 10.6 (Snow Leopard). We hope to have a solution soon.
Thanks!
Elba
Sr. Program Manager
Adobe Systems, Inc.

I am happy to report that the CinemaDNG importer problems we were seeing with Mac OS 10.6 are resolved with Mac OS 10.6.1. If you are still having problems running the CinemaDNG importer in PremierePro CS4 after updating to Mac OS 10.6.1, please contact me.
Thanks,
Elba

Similar Messages

I am using Dragon for Mac and it is not supported under the current Mac OS?

I have been using Dragon for Mac for some time. But it no longer works because Dragon for Mac is not supported on the new OS. How do I use Dragon for Mac on the current version?

I bought the Mac Dictate program Version 3 latest one out there at Best Buy. Bless their hearts they tried for 6 hours at no charge to me to make it work. They gave me my money back. It continued to crash.
This is what I learned in 6 hours.
In answer to your question it is not supported even on the OS X Version 10.9.1
Message read
Incompatible Software
The following software was found during upgrade and is incompatiblewith this version of OS X. It has been been moved to the incompatible with this version of OS X
It's a 50/50 chance it will work. I will tell you what my issues were
1.Even if you update your Mac's version it will not work
2.Nuance Mac Dictate staff patronize you and tell you it's Apples system fault, They don't return your phone calls.( I spoke to a Patrick who wanted me to send him a screen shot of the the crash then said,
To save an apple system profiler report
3.WAIT
I just discovered that of you go to System Preferances and check Use Enhanced Dictation . To start dictation press your fn function key twice and you are recording. OMG! I opened WORD into a blank page tried it and it works! Also It's free on Mac.

My iMac G5 with OSX 10.5.8 says Firefox 4 is not supported by the archetecture. Solution?

Downloaded Firefox 4, replacing older edition, which worked well. Icon of new version came up with circle with slash on it, and when I attempted to open the new Firefox, the Mac said it was not supported by the architecture.
What's the problem and solution? Will it not work with G5 models?

http://www.mozilla.com/en-US/firefox/4.0/system-requirements/ <br />
Mac
Operating Systems
* Mac OS X 10.5
* Mac OS X 10.6
Recommended Hardware
* Macintosh computer with an Intel x86 processor
* 512 MB of RAM
* 200 MB hard drive space
For older Macs that aren't supported in Firefox 4.0, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/

I want to share Microsoft word from my desktop mac to my laptop but every timeIi try and do it, it says that it can't open because it is not supported by the software. I have tried several times and updated it on the mac but its still not working.

I want to share Microsoft word from my desktop mac to my laptop but every timeIi try and do it, it says that it can't open because it is not supported by the software. I have tried several times and updated it on the mac but its still not working. Any ideas?

You need to install Office on the computer from the installer DVD or disc image you purchased.

I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell wh

I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell what I do and do not have?

Apple Menu --> About this Mac.
Mylenium

When I try to open the EOS digital solution disk ver 24.1 for my new Canon Rebel T3i camera on my Mac 10.5.8 a notice "this software is not supported by the CPU you are using" comes up. What gives?

When I try to open the EOS digital solution disk ver 24.1 for my new Canon Rebel T3i camera on my Mac 10.5.8 a notice "this software is not supported by the CPU you are using" comes up. Do I need this software? Can I just download the pictures to my Mac without using the Canon software?

When I try to open the EOS digital solution disk ver 24.1 for my new Canon Rebel T3i camera on my Mac 10.5.8 a notice "this software is not supported by the CPU you are using" comes up
You need to contact Canon - or read the software specs - it sounds like the software you got form them is not supported by your computer
Do I need this software?
Probably not - exactly what about it do you want?
Can I just download the pictures to my Mac without using the Canon software?
Probably - if you are shooting JPEG - launch iPhoto and in the iPhoto preferences set action when a camera is connected to launch iPhoto and connect your camera - iPhoto should launch and you should be able to import
Some cameras need to be set to mass storage mode - read your camera manual for details and procedures
If you are using RAW then your camera needs to be on this list and you need the versions of software noted - http://support.apple.com/kb/HT4757 - for older OS versions you can use google to find the list of supported cameras
LN

Help! Some features of Mac OS X Mavericks are not supported for the disk "Macintosh HD"

I'm on a MacBook 13" mid 2010, OS X 10.7.5, I want to upgrade to OS X Mavericks. I have searched around for a few days, I find people with the same problem but can't really get the solution for it. I prefer not to reinstall OS X, I want to upgrade. I don't have boot camp or something just a 250 GB HD.
Well, while I'm trying to upgrade from the download from Apps Store, I open the installer, press continue then accepts the Terms.. then select Macintosh HD and click install, then an warning message shows up "Some features of Mac OS X Mavericks are not supported for the disk "Macintosh HD"
As I've read the article that is included in the waring message i did try to install anyway because it say that I would be fine, but when i did try to install the installer starts and after like 3 minutes a window appears, Install Failed.
I've even try to make a installer on USB, both with the command in terminal and with Diskmaker, but it does not help.
It seems impossible to upgrade. Please Help me.

First, see the heading "What to do if the installer warns that no Recovery System can be created" in this support article. If you use Boot Camp, back up and delete the Windows partition using Boot Camp Assistant. Try the installation again.

Some features of Mac OS X Lion are not supported for the disk

At the beginning of the installation on my MacBook Pro (early 2008, non-unibody) this alert appeared. The disk is partitioned into three partitions: 1. = Photoshop-scratch, 2. = System, 3. = Bootcamp. It seems that this causes the system-message. What could be the reason for that: The Photoshop-partition or Bootcamp? Is it possible to erase just the PS-partition and then install Lion or do I have to reformat the disk?
Message was edited by: Stefan Gregor (... **** orthography ...)

OS X Lion: 'Some features of Mac OS X Lion are not supported for the disk (volume name)' appears during installation

The App store stopped accepting my credit card all of a sudden. It says that my credit card is "not supported by the Chilean app store"... The credit card is Chilean and was working just fine. Help!

This is the second time this happens. I was living in the US until April 2011. I moved to Chile and kept using the App Store and the iTunes Store just fine with my US-issued credit card. However, when I accessed my Apple ID from a different device, the store stopped recognizing my credit card information and migrated my ID to the "Chilean" App & Itunes Store (significantly less apps & music... but anyway). I started using my Chilean credit card on the App and iTunes store with no issues. I supposed that the devices catched that I was no longer in the US and that I had to be transferred to the related store (which I think is fine), and that because I was now in the Chilean store I needed to use a Chilean-issued credit card (which doesn't make sense to me, I still don't understand why Apple stopped accepting my US credit card if it is accepted everywhere else in the world online and offline!).
However, yesterday I bought something from my iPad and when today I went to use the app store from my iPhone the SAME THING happened. I got the same request to "update my billing information", I confirmed my Chilean credit card info and, surprise! "Your credit card is not supported by the Chilean app store"...
I don't get it. If I didn't get it the first time, I ended up accepting it an getting over it because ok, I moved to another country and my account was migrated, etc. But now, it doesn't recognize my local credit card in my local store! I tried both my local Visa and my local MasterCard, and none of them worked. It looks like my account will not accept ANY credit card, no matter wheter I try to update the info from my mobile devices, on iTunes, on the Mac App Store, etc.
It has been impossible for me to find any information on what causes this and on how to solve it, and so far I hadn't had any trouble with Apple and hadn't need any support before, but now that I need URGENT SUPPORT, I've come to realize that THEY SUCK at being accessible! There's no way I can contact them! So, please help me!!!!! I need urgent help!!!!
Thanks and sorry for the very long post.

Same thing happened to me with my peruvian credit card in the peruvian app store, I want to buy an app, but it says that my credit card is "not supported in the Peruvian app store"

Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the ca

Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the camera the port out is to use a USB data cable to a laptop for my macbookpro can not read the contents of the file and the camera. I also want to use the lens on the camera as a substitute for the embedded camera on my macbookpro, what should I do to replace the embedded camera on macbookpro with sony camera so that the camera could be more variety and can I record when I turned macbookpro . Please help for this so that I can quickly capture the results from sony camera to my macbookpro. Thank you.

See this page http://macosx.com/forums/networking-compatibility/296947-sony-camcorder-my-mac.h tml - might be some helpful tips there.
Clinton

CS5 RAW Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.

I rented a Nikon D600 & D610 and CS5 cannot open the RAW files, i do not have any issued with my D700 RAW files. I am getting this error message -
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.
Can anyone please help?

yellowmledbetter wrote:
Sorry, I am on a MAC. I downloaded the link you provided and it's giving the same error message as above. Running CS5.
The error message you gave is from Camera Raw. I thought you said that DNG Converter didn't work?
The link I gave you is an article on getting your raw files to open in Camera Raw. Did you read it? I lazily gave you the link because this is one of the most common problems in this forum, and I get tired of saying the same thing over and over again. I could break it down for your specific case, but I was hoping you could read through the article and work it out for yourself.
But, here goes:
Your cameras are newer than your raw converter, so it won't understand them.
CS5 comes with Camera Raw 6, which can only be upgraded as far as 6.7.1. You can find out which version of Camera Raw you are running in three ways: in the settings title bar (Cmd-K), in the plug-in title bar (press F to start/stop full-screen mode to reveal the title bar), or Photoshop's Help menu (About Plug-ins).
Downloading raw files from newer Nikon cameras with old versions of Nikon Transfer will actually make them unreadable in Adobe software. They can be fixed with a free utility. Again, it's all in the linked article. You should be using up-to-date Nikon Transfer, or Adobe Photodownloader to avoid this problem.
All being well, you have good raw files on your computer. You can convert them to dng using Adobe DNG Converter. IF you are on OSX Leopard or Snow Leopard, you CAN'T use the latest version, because Adobe stopped support. But, if you ARE on a later OSX, you can download DNG Converter 8.6.
DNG Converter is designed to convert FOLDERS of raw files at a time. You select a folder of raw files, and tell it to create DNG copies. BUT, you have to set up the converter before you start using it...
If you load up DNG Converter, you'll notice a button labelled "Change Preferences". Clicking this, you'll see the first option is "Compatibility". Here, you must select the appropriate setting for the version of Camera Raw you HAVE (see above). If you can't work this out, just pick "Camera Raw 5.4 and later". THEN pick a folder of raw files and convert them to DNGs.
All the above is already in the article, but I gave you a personalised response. If you still can't get it to work, please give us more than one sentence. Tell us exactly what you tried, and describe exactly what happened. Which version of OSX you're running, what device and software you downloaded your raw files with, how you used DNG Converter, and so on.
I really should be in bed.

"........iMac is not supported on the iPhone

I have an older iphone - 2 I think. When I try to connect the bluetooth I receive a message on the iphone, ".........iMac is not supported on the iPhone" Does anyone have a solution. Both the iphone and imac can find each other, the iphone just will not accept the imac. Is there a download to upgrade the iphone to accept my new imac. Thank you.

iPhone's have never been able to sync via Bluetooth.
In the last year Apple added WiFi sync to iTunes, so you can sync an iPhone or iPad via WiFi with iTunes.
You can also sync wirelessly over the internet using iCloud for contacts, calendars, bookmarks etc - again over WiFi.
But you cannot, and never have been able to, sync an iOS device with a Mac over Bluetooth.

"You can't open the application "Flash" because it is not support on the architecture"

Looking for some help with this.
I recently had a system corruption on the MAC machine here in my office.
The user was suppose to save his work to the servers which they didn't.
The users that was using the Mac ended up losing all there data as the hard drive failed.
As a precaution I decided when I was rebuilding the MAC to replace the dead 250MB hard drive with 2x1TB hard drives.
I would then create a RAID1 (Mirror) with the two hard drive so if a single drive fails the users can continue to work without interruptions or losing any work.
Mac installation went without an issues. Then the Adobe installation appears to go okay, however as I was double-checking the installs for the Flash and Indesign programs were grayed out wiht that no smoking sign symbol on them. When attempting to run the programs all I recieved was the following Error:
"You can't open the application "Adobe InDesign CS4" because it is not support on the architecture"
or
"You can't open the application "Flash" because it is not support on the architecture"
All other programs for the CS4 open and run without any issues. The CDs I have are for a multi-user license.
System spec are:
Model Name:                             Mac Pro
Model Identifier:                      MacPro3,1
Processor Name:                      Quad-Core Intel Xeon
Processor Speed:                      2.8 GHz
Number Of Processors:            2
Total Number Of Cores:          8
L2 Cache (per processor):        12 MB
Memory:                                  8 GB
Bus Speed:                               1.6 GHz
Boot ROM Version:                 MP31.006C.B05
SMC Version:                          1.25f4
Does anyone have a solution?

The usual reason for that error is that the application isn't installed. As for why they didn't install, that I can't tell you.
Bob

The Mac Book Pro is not charging. The led is green with the connection and the computer is not charging. Thank you for the help

The Mac Book pro is not charging. The led is green with the connection and the computer is not charging. Thank you for the help

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best.

HT5022 Instructions for Airport Utility 5.6 don't work: "version of Mac OS X is not supported"

Via Software Update, I just downloaded & installed the latest version 6.1 of Airport Utility. When I tried to use it I discovered it recognizes but doesn't support my Airport Expresses (odd in itself).
I was told to install version 5.6 to manage these older devices. So I obediently tried to install it (actually it's v. 5.6.1).
But it won't install! The Installer tells me:
"AirPort Utility can't be installed on this disk. The version of Mac OS X on this volume is not supported."
The system requirements are listed as "AirPort Utility requires Mac OS X v10.5.7, v10.5.8, v10.6 or later." I have 10.7.4.
What the heck is going on here????

Try this one until they fix it:
AirPort Utility 5.6 for Lion: AirPort Utility 5.6.
If that does not work:
AirPort Utility for Leopard, Snow Leopard: AirPort Utility 5.5.3.
Both will run fine on OS X 10.7.4 but since I already have them installed, I do not know if the installer will object. Both will administer all Express models except for the new dual band model.

Mac OS 10.6 not supported by the CinemaDNG importer

Similar Messages

Maybe you are looking for