Mac OS 10.9 and installation for Laserjet 1022n to our networks

I work for a school district and have purchased new MacBook Pro laptops for all our preschool teachers. I am trying to set up their laptops to our network printer in their classrooms.....however when I try and use the mac setup.....there is no software for this printer. I then connected the USB cord to the printer and it downloads the software for desktop version not the network version. When I try to add the IEP address......it says it can not use the printer because it is already in use.
I have been struggling with this for two years now. Possibly I need software to install?
HELP and thanks so much for your help or any suggestions.....techieQ

Hi TechieQ,
On the Apple forum, I found a thread with istructions for a different driver which may help, it's the second post from the bottom. I can't test this out, so post back your results... Hope this helps!
HP Laserjet 1022 printing on Mac
Say "thanks" by clicking the Kudos thumbs up!
Was your question answered? Mark it as an Accepted Solution!
I work on behalf of HP

Similar Messages

I need an Acrobat Pro for several users in our network

I need an Acrobat Pro for several users in our network

If you have enough users a volume license will be a reasonable choice. Again you might contact Adobe or an Adobe reseller.
http://partners.adobe.com/resellerfinder/na/findreseller.jsp

Ethernet MAC address has changed and I can no longer connect to the network

I have a new iMac, 21.5" running 10.6.4. It was purchased in the past month.
I am using it on an ethernet network and using DHCP to obtain the address. It has been working for the past few weeks. I turned it on today and it is failing to connect. After some digging around, it seems that the MAC address (Ethernet ID) has been reset to 00:10:18:00:00:00. This is different to the one it has been using last week.
I have not changed any network settings. Airport is working fine.
If I pull out the ethernet cable and reinsert, the machine tries to obtain an IP address. After a while, it returns with a self-assigned IP Address.
Last week, I did notice that it was taking a relatively long time (a minute or so) to obtain the IP address over ethernet. Plugging the same ethernet cable in a macbook, I am able to obtain the IP address for the macbook much more quickly.
I see that I could use ipconfig to change the interface address to what I believe is the correct address. Would this be sensible?
Why would the machine have reset the MAC address anyway?
Regards,
Neil

Dear all,
I am having the same problem with a new MacBook Pro, bought end of October - for me it became apparent for software (Matlab, Comsol) that are registered with a licence file which was created based on the MAC address, and also when trying to register the computer to the company network. That software will only work those times that the computer "knows" its real MAC. Also, I found that audible audio books, managed through itunes, will not synchronize with the ipod at those times when the MAC address is at the producer's default (00:10:15:00:00). I never had network issues other than this computer registration, - no probs at home or elsewhere - , so it will depend on the individual setup which issue users observe.
I have had long phone discussions with different Apple support people, they have done checks based on Capture Data that I sent to them via email, etc.. They can't find the problem in the software/setup and they advised me to go the Genius Bar and have those guys look at the computer's guts.
Restarting sometimes did set the MAC to the real one, also running the code that someone suggested in Terminal sometimes helped.
Other than that, looking through the web, it does not seem to be an Apple-unique problem, but certainly one would like to see support to take care of that issue for Macs soon.
Also, thanks a lot for this thread! Otherwise the support guys on the phone would not have believed my : "the Mac address changes on a daily basis" and would just have brushed me off.
All the best,
Susanne
Message was edited by: semperula

I need to create a shared file for my mac, HP Photosmart 7520 and Neat Desk for Mac

I recently got a Neat Desk for Mac, at an estate sale (No Warranty)
I also use a HP PhotoSmart 7520 wireless, multifunctional printer (Out of Warranty)
and a MacBook Pro (Out of Warranty)
The instructions for the Neat Desk describe files I should have under the HP utilities folder. Such as the "Scanner Destination" folder I do not have these folders they describe.
I called HP and they felt I would be better off contacting Apple to discuss "Shared Folders" I'm out of warranty with Apple too, so I could use some help,

Did you install the Neat for Mac software?
http://www.neat.com/support/downloads
MtD

TS3989 I have photo stream enabled and working on my mini mac computer, ipad, iphone, and it worked for a while on my PC, but I am no longer having photos downloaded to my PC. I have tried the photo Stream options buttons, nothing is working or changing

what can I do to get photostream working again on my PC?

Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Hi, I have Mac with Snow Leopard and was trying to purchase Lion , so I can move to I cloud, when trying to buy the app I get a message that a minimum 2gb of memory is required. I went check the hard disck info and it says available memory 20gb :-(

Hi, I have Mac with Snow Leopard and was trying to purchase Lion , so I can move to I cloud, when trying to buy the app I get a message that a minimum 2gb of memory is required. I went check the hard disck info and it says available memory 20gb :-(

Apple Logo, left hand side of the menu bar, About this Mac. It should be right there. If not then More Info, Sys Info.
But it would seem you don't have 2GBs installed and more then likely both RAM slots are already filed. So you just need to buy more RAM in a pair. That could be 2 1GBs chips or if your Mac can have more then that then 2 2 GB chips or 2 4GB chips.
Get your model # and go to Crucial.com and use their memory search to find out how much your Mac can have installed and the price for it. I suggest you install as much as it can take. Cost is very low on RAM these days.

How to change IP, Hostname and domain name for Oracle Application R12

Hi,
I'm new to Oracle, we used to have one production and one test server for Oracle Application R12, but the test server was corrupted, so we decided to clone production server and create a new test server, after cloning and creation of test server, how should we do to change IP address, hostname and domain name for test server?
Our production and test server environment is:
Linux Enterprise AS 2.6.9
Application module: E-Business Suite Treasury only
Your advice will be much appreciated.
Regards,
Kenneth
Edited by: 850209 on Apr 7, 2011 5:37 PM

850209 wrote:
Hi,
There are few tnsnames.ora and listener.ora files in the system, how to know which one are effective? If I change tnsnames.ora hostname entry, do I need to change listerner.ora file also?
Thanks.
Regard,
Kenneth.tnsnames.ora is used only by client processes. listner.ora is used only to configure the listener, and that is a server side issue only. In addition, the listener can start without any listener.ora at all, using all default values. See my discussion of tns issues at edstevensdba.wordpress.com
If you are using dbcontrol, you will most likely need to reconfigure it, using the emca utility.

How to find custom Tcodes,programs and enhancement.. for a specific country

hi...
Is there any way in ABAP to find the Custom Tcodes, programs and enhancements only for specific country in our present system.

Hi Srujan,
Use the table name TSTC to find the custom program and t-code.
To find the custom enhancement use t-code : CMOD.
Regards
Dev

What is the optimum core configuration for a new Mac Pro to process and manipulate very large (80 megapixel) images using PhotoShop and Camera Raw?

Hello:
I will be using creative techniques to process and manipulate a large number (hundreds) of very large (80 megapixel) images captured using a medium format digital back (Phase One IQ180).
Final output will be digital fine art imagery printed using an Epson 11880 at large sizes (up to 60 inches x ?), retaining the highest possible quality and resolution. I will be using Adobe CC PhotoShop and Camera RAW as well as Capture One software. PhotoShop filters will be used extensively.
The Mac Pro needs to be optimized for the above purpose and be useful for at least five years. I plan to max out all the other options (RAM, graphics cards, storage). Performance is more important than cost.
The few discussions I have found that mention optimum core configurations seem to lean toward 6 or 8 (but likely are not taking into consideration my need for manipulating a large number of very large files), so I am looking to this foum for opinions.
Thank you,
Kent

See if this helps
http://macperformanceguide.com/index_topics.html#MacPro2013

A few questions before I buy a new iMac/Mac mini and sign up for Creative Cloud.

Hello Everyone,
I am looking to purchase a new Apple computer and sign up for Creative Cloud within the next week and I have a few questions that should be answered before I proceed.
My wife and I own a business and we will be using the CS6 apps to create brochures, Constant Contact mailings, product package inserts, edit product photography for print and web use, and short HD how-to videos. We are not graphics professionals or power users and wont be doing anything too complicated.
Any help and answers will be greatly appreciated.
I will start with the hardware questions first:
I am trying to decide between the iMac and the Mac mini.
The iMac is a 2.7Ghz Quad-core Intel core i5 and comes with 4GB of memory that is expandable to 16GB, which I will do for sure. It comes with a Radeon HD 6770M graphics card with 512MB of GDDR5 memory(not upgradable), and a 1TB HDD that runs at 7200RPM. This unit meets the specs required.
The 2.5Ghz Mac Mini comes with 4GB of memory that is expandable to 8GB, I will also do this. It has a Radeon HD 6630M graphics card with 256MB of GDDR5 memory(not upgradable), and a 500GB HDD that runs at 5400RPM. This unit meets all the spec(I think) except for the speed of the HDD.
Question: Will the mini run the software without too much of an issue considering the speed of the HDD?
Question: Will the iMac run the software significantly better to justify the price difference?
I already have 1 mini(purchased 4 months ago, with the same specs listed above) and will be purchasing a second computer for my wifes desk. If the mini will run CS6 fine, that is great and we can save a few bucks. If my mini will not run CS6 well, I will get the iMac for her desk as she will be doing the bulk of the work in that regard anyway.
Now a couple of software questions.
After reading hundreds of reviews and forum posts over the last few days I have seen many people having this or that issue. It seems to me that most of the issues are because of upgrades from Lion to Mountian Lion after installing CS6 first or trying to open CS3,4,5 files in CS6.
If you want to know what issues have me concerned take a look at just this one forum:
http://blogs.adobe.com/jnack/2012/07/adobe-cs-apps-mountain-lion-no-known-issues.html
Similar issues are discussed in the Apple forums as well as many other places around the web.
I am not a computer professional but I know enough to maintain my systems and keep them running smoothly.
We do not have any Adobe software installed on my mini and will not be opening any files from previous versions of Adobe product in the new CS6 software. These will be a clean installs on pristine systems running fully updated Mountian Lion OS's on both machines and creating new files from scratch.
Question: Should I be expecting any issues like the ones I have read in the forums and blogs or are these just the normal things that happen when upgrading to new software with multiple hardware configurations?
My feeling is that we will not be having too much of a problem due to the clean installs and no files from previous versions.
Next up, the Creative Cloud(CC) FAQ states that you can install on 2 machines but can't open stuff at the same time.
Question: Does this mean we can't be using any CS6 apps at the same time or just not using the same app at the same time?
Example: PS and PS on both machines at same time = No, PS on one and Dreamweaver on the other at the same time=Yes?
The CC FAQ page says Adobe will add Lightroom 4 later in 2012 while the main CC page lists it as available now.
Question: Which is true?
My mini is registered to me, with my name, iTunes account, Apple ID etc.
Question: Do I need to do the initial set-up of the new machine with all my information to ensure the CS6 suite works on both machines? Do the computers need to be registered(as far as Apple configuration is concerned) to same person for them to work on one CC account or can I install CS6 on any 2 machines regardless of how they were initially set-up?
This may seem like a silly question but I want to avoid any problems before they happen.
Well, those are all of my questions at the moment. To anyone who made it this far in my looooong post, Thank You so much for your time. I appreciate your expertise and knowledge and hope that you can help me make this decision.
Cheers,
Alex Bogdan

Alex,
I'll try and answer your questions as best I can.
Qn 1 Which Mac.
Ans:- As I understand it both units will run Adobe CS6.
          Which one really depends on what you wand from CS6. If you are looking for high end demand and performance, then I would go for the IMac
          Your Specs for the Imac are right. However if you buy your IMac straight from Apple there are even higher specs.
          You can get:-
                              3.4 GHz i7 processor rather than the i5
                               2GB video card as opposed to a 1Gb video card.
                               Of course such a model will cost you more.
          In the end it is needs compared with money to spend. That is only a decision you cam make.
Q2:- Will the higher cost for the Imac justify copst.
Ans:- Again it depends on what demands you intend to make on the hardware and software.
          But I note you have a business and if that businees expects to high demand and high speedy performance then I suspect the Imac would be more able to provide your needs.
          Again only you will know the answer to that.
Q3:- Questions about CS6 reliability
Ans:- I have been with Adobe for way over 10 years.
         Speaking, only for myself, it is the most reliable software on the market.
          It is true that if you look down this form, like any other and I am thinking about the Apple discussions forum, you will find numerous instances of problems.
          Again this is only my opinion, but although all these problems are real for the individuals:-
          First it is not clear why they have the problem e.g. what have they done or not done.
          Second, they are in the minority of the total users using the hardware / software.
          The only problem I am aware of with CS6 is Acrobat X. I understand it has been sorted Adobe, however it cost me so much work I have removed it from my system and reverted to Acrobat 9
          So what I am saying is that there are only two comapnies I rely 100% on: They are Adobe and Apple.
         So if you are happy with my opinion I would not worry about Adobe CS6
Qn 4:- CS6 0n 2 machines.
Ans:- Yes you will not be able to run the same program similtaneosly.
           I believe, if it is important that you do run the same program together, that you can acquire a further licience from Adobe to do that.
           You would need to contact Adobe about that.
Qn 5:- Lightroom 4
Ans:- Lightroom is now available as part of Creative Cloud.
Qn 6:- Set up for individual machines
Ans:- I do not believe you do. Once you have set up your Creative Cloud account you go to the apps site and download the apps for each machine.
          Each machine downloads the apps and your machine and the apps are registered by Adobe.
         Here is something that you may want to know:-
          Because I was so unhappy loosing all the Acrobat data with Acrobat X I ended up deleting Acrobat X
          However as far as Creative Cloud is concered Acrobat X is still on my machine.
          It is not a problem for me because I am happy with Acrobat 9, it fullfils my needs and has not crashed and lost me all my bookmarks.
          However here is the point:-
          Adobe, when there was a problem with Acrobat X requested that no-one deletes the application.
         Though I do not know for certain I believe registration of the apps you have with Creative Cloud are registered with Creative Cloud in their database. Therefore were you to delete an app, it will still be registered with Creative Cloud and you will not be able to download a further copy even though the app is no longer on your    machine.
          Therefore it maybe not a good idea to delete an app when you no longer have a use for it. If you want it back I suspect you will have to contact Adobe Support
Personal Comment:-
          It is true many unfortunately have had all sorts of problems, including me with Acrobat X.
          That said, Creative Cloud in my view has been a major advance in how Adobe delivers software. I have no regrets with signing up to Creative Cloud and I expect to remain with it.
Hope all of that goes some way to answering your questions.

I desperately to uninstall adobe reader from my Mac book air. I sent adobe reader to trash and afterwards look for internet plugs in in library but the folder is empty. Can anybody help me?

I desperately need to uninstall adobe reader from my Mac book air. I sent adobe reader to trash and afterwards look for internet plugs in library but this folder is empty in my library. Can anybody help me?

I looked for plugs in in my library but the folder internet plugs in is empty

HT3986 I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 pro

I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem

i try to download now, do you think when i download and install the windows support software, can i fix the problem?

HT203421 I have two mac computers, one pro and one mini. I am having trouble with singing-in to Apple with One password. The computer I make it on will sign-in OK but if I try it with the other, it will not recognize it. I am using only one email for

I have two Apple computer, a Mac Pro and a Mac Mini.. When I attemped to sign in on Apple on one of the computer (Mac Pro) that I made the password on, will work OK but if I got to the other computer (Mac Mini) and sign in, it will tell me I am using the wrong password, so if I go and make a different password for the Mac Mini computer with the same email for both computer, it will work for the Mac Mini computer but not the Pro..
I have even made another email account for the Mini and tried that but it will still go back to the original.. What can I do or need to do to correct this?? Please Help if you can>> Betty

I have two Apple computer, a Mac Pro and a Mac Mini.. When I attemped to sign in on Apple on one of the computer (Mac Pro) that I made the password on, will work OK but if I got to the other computer (Mac Mini) and sign in, it will tell me I am using the wrong password, so if I go and make a different password for the Mac Mini computer with the same email for both computer, it will work for the Mac Mini computer but not the Pro..
I have even made another email account for the Mini and tried that but it will still go back to the original.. What can I do or need to do to correct this?? Please Help if you can>> Betty

I am setting up a time machine backup to a external Hard drive. I want to backup by Mac book Pro running OSX 10.8.5. I would like to Partition the disk and use one partition for Time machine backups and the other for my Lightroom backups. How to do this?

I want to create a two partition disk. One partition for time machine, the other for Lightroom backup. Currently Time Machine is using the entire drive and it is doing the intial encryption and is about 29% complete after two days. I've decided that I want to turn encryption off and partition the disk. So I do I start over?

With the external drive attached, open Finder>Applications>Utilities>Disk Utility. Select the external drive from the list in the left side panel of the DU window. In the main window panel, click Partition in the buttons top center of that panel.
Select the number of partitions you want and adjust their sizes.
For the first partition, click to highlight the partition, then select the format, Mac OS Extended (Journaled) and then the partition table as GUID [both of those are the defaults]. Click Apply and it will ask to confirm and erase and format that partion...oh, give the partition a name, like Backup.
Then repeat those steps for the second partition..and remember to name it...something like Lightroom.
Close Disk Utilitty and you are ready to send TM to the one partition, and do your backup of Lightroom to the second partition.

HT4946 i am administrator for Mac. My husband and i both have separate iPhones with separate contacts. Since i0S 6.1 update these contacts are now shared which we do not want. I have set up separate iCloud email and account for my husband. How do i ensure

I am administrator for Mac. My husband and i both have separate iPhones with separate contacts. Since i0S 6.1 update these contacts are now shared which we do not want. I have set up separate iCloud email and account for my husband. How do i ensure that i

You can continue to use the current AppleID for iTunes, but your husband can create a new AppleID to use to create a new iCloud account that will be his own and not overlap with yours. If you do not have another email address to use for an AppleID, just get a free Gmail account and use that.
You can have as many AppleIDs as you want (or at least, as many as you have email addresses for). You can use a separate AppleID for the store, another for iCloud, and even another for iMessage if you wish.
You will want to keep the current one as the shared one for the store as all your previous purchases are permanently tied to it, and thus you need that AppleID to update or redownload your current purchased content.

Mac OS 10.9 and installati​on for Laserjet 1022n to our networks

Similar Messages

Maybe you are looking for

Mac OS 10.9 and installation for Laserjet 1022n to our networks