Mac OS 9 Startup disk On Mac OS X

Hi, I have a power book g4 and am alittle new to it and I have a program that needs to run in classic mode with the Mac os 9.1 or 9.2 start up disk. I have a software disk that came with it but its to install 10.2.7 or something, so how do i use this porgram if i dont have a cd to install? By the way I bought the laptop used so i am not sure if there were any other disks than this.

Hi, Arby -
Okay. Apple designates your machine as a PowerBook G4 (17" 1.33GHz) model.
It is not OS 9 bootable - this means that there is no stand-alone OS 9 Install CD which you can use (the installer on all of those requires that the machine be booted to OS 9).
However, the original disks that came with the machine have the ability to install Classic (Classic is a full install of OS 9 which is used as a program by OSX in order too provide an environment in which many OS 9 programs can be run).
One or more of these Apple KBase articles should assist you in installing Classic from your original disks -
Article #106294 - Mac OS X: How to reinstall Mac OS 9
Article #107383 - Mac OS X 10.2, 10.3: How to perform Mac OS 9 clean installation with Restore CDs
Article #42929 - Using Restore Discs with Mac OS X 10.2 or later

Similar Messages

  • How to install an OS on a Mac Pro without using a startup disk

    Good Evening... I have purchased an Mac Pro 4,1 without any HDD attached to it and I have no startup disk for the installation an OS... When I do power on the Mac Pro, I get a flashing folder with a question mark in it! How can I be able to add an OS for two HDDs that I would like to install?

    No. Boot the MP using the external drive. If you need to prep the drives, then:
    Drive Partition and Format
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select the hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Once the drive has been prepped just clone your external drive to the internal drive:
    Clone using Restore Option of Disk Utility
      1. Select the destination volume from the left side list.
      2. Click on the Restore tab in the DU main window.
      3. Select the destination volume from the left side list and drag
           it to the Destination entry field.
      4. Select the source volume from the left side list and drag it to
          the Source entry field.
      5. Double-check you got it right, then click on the Restore button.
    Destination means the Internal drive. Source means the External startup drive.

  • Brand new to the Mac World and NEED SOME HELP with startup disk issues

    Hello everyone. I am a new Mac user and I purchased my mac on ebay. It's an iMac that came with tiger 10.4.11. I wanted to get a fresh start on the computer, since the person who had it before me did not erase all of his stuff. I didn't know what to do so I got a startup disk/install disk off ebay also. When I go to install it says "software cannot be installed on this computer." Before I bought the software, I had called the apple store and they said it should be fine to buy any install software to put on the computer. If I could get any help it would be appreciated. I had read previous threads that I should hold down c when I start up (didn't work) or that I should select archive or erase and install (I never got these options when I went to install).

    A warm welcome to the Discussions!
    What iMac is it? I only ask as the Retail Tiger CD/DVDs don't work on IntelMacs, only PPC, (G3, G4, G5 Macs).
    Sorry what you were told by the Apple Store, but if it's a Gray CD/DVD then it is Machine specific as Neil stated.
    Sooo, what exact iMac is it, and what does it say on the CD/DVD?

  • Startup Disk issue in new Mac Air. Replaced with another new mac, then again. MS Excel culprit?

    Hey guys, I bought a macbook Air 11’ 4GB 128GB (Mid-2011(after selling my 13” macbook pro) and the problems seem to be never ending.
    My primary work involves using MS Excel so I installed  a licensed version of Office for Mac 2011 and started using excel on my new mac machine. Within few minutes I got a message pop-up on screen “YOUR MAC OS STARTUP DISK HAS NO MORE SPACE AVAILABLE FOR APPLICATION MEMORY”.
    I checked the size of storage and there was just 5 GBs worth space left despite the fact that there was not a single photo, music, video on the new mac apart from a few MBs of excel files. I took it to the vendor (APPLE PREMIUM RESELLER) who after re-installing lion returned it to me and the same issue again popped up. Finally, they diagnosed an SSD problem and after a week of waiting, I was given a brand new shiny macbook air MC969 (same model).
    I used the new one and again while using excel, the same issue has come up. I’m really fed up of this stupid error bcoz I was using the same OFFICE FOR MAC suite on my macbook pro and never suffered any such problem. I have also twice thrice completed all the steps I was told to do (like repair disk perm. Emptying the cache etc. )
    Since India doesn’t have any Apple owned stores but only Premium Resellers whose replacement etc policies are not governed by Apple.
    They do not even refund the money but have given an option of diagnosing the machine and replacing the problematic part.
    I googled the web and found no such issued with EXCEL. Strangely, other apps in the office suite seem to work well without any issues.
    I have attached the screenshots that how while using excel, within a couple of minutes, mac starts to heat up, then storage decreases and finally the error where mac becomes dead slow.
    Please help me to determine where the cause lies.

    The Excel files size range between 29KB to 60KB.
    That's it.
    I called up the reseller and he said that the replacement period is now over and mac would only be repaired.
    I dont want my Mac to get unscrewed

  • I just bought a new mac and need to clear the memory of my old one but i don't have a startup disk.  how do i do this?

    I just bought a new mac book pro and need to clear my old mac of it's contents to give it away---  I do not have my startup disk anymore.  How can i completely delete my old mac's memory?

    Erasing your drive:
    Dragging the files to the Trash removes the references to them from the Directory. As has always been the tradition, the data blocks that held the actual data are not over-written, they are merely added to the free list for later re-use. Their original contents are still present.
    Disk Utility "Erase" or "Partition" of a drive (which finishes in under a minute) also does not over-write the data blocks, but merely creates a new, empty directory.
    To clear the data that may still be present (admittedly in a disorganized mess of unlinked blocks) you need to overwrite the data. Use the erase tab, then choose "Security Erase" Options, and overwrite once with Zeroes. This process can take several hours as it is -- if you insist on multiple passes, it can take days to complete, with little additional protection. Multiple passes is unnecessary unless your drive held Military Secrets.
    When you have erased, be sure to install some version of Mac OS X -- a Mac with no obvious Operating software may be dead, and  is much more likely to quickly become landfill.

  • Hard time for selecting Startup Disk (partition) in Mac Classic II.

    Dear coleagues, I'd like your help to understand and solve a tricky trouble. I'm sorry for the long text, but the issue is probably living in a small detail.
    The issue regards a Mac Classic II with internal and external HDDs. Internal HDD has two partitions, a smaller with System 7.1 (first) and a larger with System 7.5.3 (second). This one is installed there since 5 years ago, working fine.
    The (just installed) external HDD has 6 partitions (because of its size 9 Gb). It has been formated runing VCP in this Classic II itself and all partitions are initialized with HFS. It is intended to be a backup for my Classic II as well as my Mac Plus. I've started Installing System 7.5.3 in its third partition. Other partitions remain still empty.
    Using only internal HDD I can already perceive that "Startup Disk" control panel is unable to change the boot partition attribute between partitions in the same drive. When I open "Startup Disk" it usualy both partitions of internal HDD are highlighted. I can select a Zip Drive, for instance, and it will boot from Zip. But, when I switch it back to HDD, doesn't bother wich partition I select, it will always boot with the same partition (usually 7.5.3). Then, If i open Startup Disk CP again, both partitions are again highlighted.
    To switch between partitions in the same drive, I use Lido 7.5.6 PMount and there I select the boot partition. Then every time I select my HDD, that'll be the default boot partition.
    My conclusion is that in Mac Classic II the Startup Disk CP is unable to set a partition within a drive, it selects the drive only. The boot will obey the drive's partition table flag. That's why I can do it whith Lido, writing directly at HDD's flags.
    Now, attaching the external HDD, I can see all its partitions in Startup Disk CP and then I select one of them (the 3rd, with 7.5.3). Before rebooting, I close and open again the Startup Disk CP, then I can see all its 6 partitions highlighted. Just like I've been doing with the internal HDD, probably the solution to set a specific boot partition would be through Lido 7.5.6 PMount again. But Lido is unable to handle this drive. It appears gray in the drives list.
    What does it sound to you? What would you recommend to test? Is there an alternative for Startup Disk CP?
    Thank you.
    Regards, Ciro (Brazil)

    Dear Jan, good Evening.
    Thank you for your time.
    In fact I can select a specific partition, but by closing and reopenning Startup Disk CP I realize that the selection has been attributed to the physical drive (all partitions highlighted).
    I have tried Startup Disk CP in both System 7.1 and System 7.5.3. They do the same way.
    Internal HDD has been formated, partitioned and initialized with Apple HD CS Setup.
    This external HDD in a different way. Apple HD SC Setup hasn't been able to "see" it, probably because of its prior format system. Lido neither. That's why I went to VCP. Moreover, as it is too big for 68030, I had to format it attached to a Performa 6360. After formating, I've let VCP make set the partitions in HFS mode (partitions with 512, 1024 and 2032 Mb).
    I've mounted VCP in Mini VMac to get some screenshots for you:
    Bringing it back to Mac Classic II, it could be mounted with Lido, but System 7 has asked to initialize all partitions again. I've accepted, installed system 7 on it, and it didn't boot. Then I've repeated the partitioning and initializing procedures using Apple HD SC Setup (since now there's a Mac HDD with "small" logical drives). Nothing changed.
    I'm following your tip about System Picker. I've downloaded the sit file and read about it. It seems to be able to overlay the problem. I'm gonna try it and report back here.
    But I feel still uncomfortable not to be able to do things the regular way. As far as I know, the boot partition is an attribute of a drive partition in partition map, just like the "Active Partition" found in FAT systems. I should be able to write there as I can do with Lido in internal HDD.
    Thank you, Jan.
    Best regards,
    Ciro Bruno.

  • I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core.  How do I create a back up startup disk?  Also, when I used Time macine, it only backed up users and not the system or library folders.  Ideas?

    I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core.  How do I create a back up startup disk?  Also, when I used Time macine, it only backed up users and not the system or library folders.  Ideas?

    Welcome to Apple Support Communities
    Time Machine should be enough to make a backup of your files. Also, it should back up all folders, so open System Preferences > Time Machine > Options, and make sure that there are no folders included in the excluded items list.
    If you want to create a bootable clone of your hard drive, you need to use an app like Carbon Copy Cloner or the Disk Utility's Restore feature > http://pondini.org/OSX/DU7.html

  • Boot Camp error: The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS Extended (Jounraled) volume or already partitioned by Boot Camp Assistant for installing Windows.

    Hi!
    I am getting the error:
    "The startup disk cannot be partitioned or restored to a single partition.  The startup disk must be formatted as a single Mac OS Extended (Jounraled) volume or already partitioned by Boot Camp Assistant for installing Windows."
    I read up some on google, but all of them says that they have crated a partition and that is the problem, I only have the standard "Macintosh HD".
    I tried to create a partition manually in disk utility but then the error message: "Partition failed with error message: Could not unmount disk."
    Can anyone help me? It's driving me crazy.
    Thanks.

    This message, and threads like yours got asked daily for over two years, now it is only a couple times a week!!
    Is it so hard to follow through? you were to have backup already, clones are best, then erase/format and restore.
    Then partition.
    Some have been able to use Disk Utility booted from OS X DVD or another drive, and repair the drive.
    You have to use Boot Camp Assistant (99.9% anyway) to create and achieve a proper Windows Master Boot Record partition.

  • Bootcamp 5 + 3TB HD: The startup disk must be formatted as a single Mac OS Extended (Journaled) volume

    Hi all,
    I installed a brand new 3TB Seagate Barracuda HD in my iMac late 2009 after read that apple provides a patch to use 3TB discs with bootcamp with 10.8.3.
    I tried to install windows in my 3TB disc 4 o 5 times, reinstalling from scratch, formatting the disc from terminal, etc... I tried everything and I keep getting the same message: The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows.
    The disc has a single 3TB Mac OS Extended (Journaled) partition, but bootcamp keep saying that is not... and doesn't allows me to install windows. I read a lot of discussions here and other communities but as I said, none solution worked for me.
    Any of you could manage to fix this issue?? Is Apple aware of that problem?
    Any idea will be welcome!
    Ivan

    Hi,
    Anybody in the forum have managed to use bootcamp with a 3Tb disc?? or get any answer from Apple...
    Regards,
    Ivan

  • Mac Pro (Early 2008) freezes, reboots to recovery system, trouble locating startup disk

    I have two issues which may or may not be related with my Mac Pro.  First, off and on for several months is has been frozen when waking from sleep.  I can hit a key and see my desktop with the windows I left open, but I get the spinning beach ball and the time is typically several hours behind.  The only way I can get it to start is to restart from the power button.  This typically happens overnight when my computer has been asleep for a long time.  Sometimes I hear the fan run while the computer is asleep and I don't know if that is related. I've tried switching from Firefox to Chrome to see if that was the problem since I typically have a few tabs open on Firefox when it freezes, but that does not solve the problem.  The next step I plan to try is to get a can of compressed air and clean the fan and check if the video card air intake might be clogged, based on information I have read in various forums.  Does anyone have other suggestions for things to try to eliminate the freezing?  Another suggestion I read was to get a new logic board battery installed but I hate to lug this thing into an Apple store unless I really have to.  Most of the time I'm comfortable fixing things on my own.
    The second issue is that when I reboot after shutting down the computer with the power button, it does not always load the startup disk.  Sometimes I get the recovery system instead, and if I try disk repair, restore from backup, or the startup disk option from the apple menu, it cannot locate the startup disk.  Usually after a few tries, I can restart it and get my desktop, but I'm not sure how long that will work.  I hoped that resetting the NVRAM would take care of this but it has not fixed the issue.  When I do disk repair, it says the drive is fine.  I've also used idefrag to clean up the drive.  I'm thinking my hard drive might be about to die and I should just get a new one, but I don't want to spend the money if that is not the issue.  I have 83 GB free on the drive so space should not be an issue.
    Any suggestions on fixing either or both of these issue would be very much welcome!  I need to make this computer last at least a couple more years.
    Specs:
    Mac Pro early 2008
    Processor  2 x 2.8 GHz Quad-Core Intel Xeon
    Memory  8 GB 800 MHz DDR2 FB-DIMM
    Graphics  NVIDIA GeForce 8800 GT 512 MB
    Software  OS X 10.8.5 (12F37)

    Back up all data immediately as your boot drive may be failing.
    If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|n Cause: -' | tail | open -ef
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.

  • No startup disk for windows in preferences on Mac

    I re-installed Snow Leopard, an already had a Boot Camp partition for WinXP Home SP3. All went fine but...
    There's no startup disk icon in startup disk options on the Mac.
    Sometimes I hold down option key to chose Mac or Windows and it's fine, bit if I boot to windows, the next time it auto boots to windows everytime, even with key held in. I then, in windows, chose boot camp icon in taskbar and chose "restart in Mac OSX" and it does.. Now however it boots to Mac everytime!
    I didn't do a re-install of the boot camp partition, as was all fine installation wise after I did with Snow Leopard.
    Anyone help please
    Cheers

    Still having bother with this, can anyone help please.
    The Windows disk doesnt show up in Mac OS on "startup disk preference", when in windows boot camp, both the Mac OSX and Windows partition show up.
    Sometimes if I boot into Mac, I then cant boot into Windows via the "option key", if I've been in Windows, I cannot get to Mac with option key, have to goto boot camp options and "restart in Mac OSX"
    So something is messed up, can anyone help please? I use Mac and its fine, but kids use Windows, and when I'm not in it doesnt work, so its difficult to explain over phone.
    I have a wireless keyboard and it seems it doesnt switch on when booting up iMac, so the option key isnt detected - again randomly
    cheers

  • How to change startup disk for a 2012 Mac mini with dual HDD and clean installed with Windows 8.1?

    Hi,
    I have a Mac-mini (late 2012 model), originally with Mac OS X Maverick Server installed (with two HDD). Recently, I had clean installed Windows 8.1 on one of the HDD (worked perfectly, just slow) and swapped the other HDD (with Mac OSX) with a SSD. I then cloned the Windows OS HDD in to the new SSD. Now I am trying to boot this Mac mini from this SSD, however, since this Mac mini do not have BIOS for me to change the boot sequence at the startup, is there any one can help?
    Thank you,
    Liusc

    If you boot with the Option key depressed what boot options are shown?
    Also:
    Restart your computer
    After Windows is installed, you can switch between OS X and Windows. Use the Startup Disk preference pane in OS X, or the Boot Camp system tray item in Windows to select your startup disk, then restart your computer
    How to install Windows using Boot Camp - Apple Support

  • I have Mac OS X, using boot camp i installed windows 7.  installation was successful but when i try to select to boot back to mac os x via boot camp from Windows 7 control panel, its saying "You may not have privileges to change the startup disk..."

    from the boot camp control panel, highlighted "Macintosh HD Mac OS X", click on Restart button or click OK or click Apply buttons gave me "An error occurred while trying to change the startup disk.  You may not have privileges to change the startup disk.  Make sure you have administrative privileges and try again."
    Im logged in to Windows 7 as admin thou but still giving me the above message.
    i rebooted & the option key does not give me option to boot to Mac instead gives me a screen with lock then below is a blank field then a right arrow on the right side, i normally hit the power button from this screen
    please help
    thx

    sorry for digging up an old thread, but what was the problem?

  • HT201364 i can install the os x because the is "You need 4.95 GB of available space to download OS X Mavericks. Remove items from your startup disk to increase available space." however, my mac air his space . so how can i

    i need to install the new 10.9.2 to my mac but i cant becouse no available data there while i have space there ;therefore, how can i install it 

    Freeing Up Space on The Hard Drive
      1. See Lion/Mountain Lion/Mavericks' Storage Display.
      2. You can remove data from your Home folder except for the /Home/Library/ folder.
      3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
      4. Also see Freeing space on your Mac OS X startup disk.
      5. See Where did my Disk Space go?.
      6. See The Storage Display.
    You must Empty the Trash in order to recover the space they occupied on the hard drive.
    You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
    Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.
    In reality you will need a minimum of 12 GBs of free space to both download and install. Even then you still will need at least another 10 GBs free or a total of about 22 GBs.

  • Mac startup disk memory problems

    Hello Apple Community.. I have a trouble starting up my mac and I thought entering startup disk mode would solve my problems.. There are two disks named Untitled, placed the one under the other. The first one says that I have 19 MB (!!!) available and the second one 388 GB.. What have I done?

    Thanks for your immediate response!
    This is how my disks appear.. Is it normal? I had my disk changed on Monday, but still the same numbers..
    Did I do something wrong?
    I'm using a MacBook Pro from mid 2012 with a 2,5 GHz i5 Processor and 4GB RAM
    Thanks a lot!

  • New MacAir error states "your Mac OSX startup disk has no more space available for application memory"  All I have added is MS Office

    My new Mac Air states that my " Mac OSX startup disk has no more space available for application memory" and wants to force quit Safari.  I have only added MS Office to the computer and Carbonite.  Any suggestions?

    Select the icon of your startup volume ("Macintosh HD," unless you renamed it) in the Finder and open the Info window. What value is shown for Available (space)?

Maybe you are looking for