Mac os: Photoshop CC Preset Manager hangs when I attempt to 'Load.'

I go to preset manager and select brushes.  Then select to 'load.'  Goes to the 'Open' screen and lists folders/files as expected, but I get a spinning wheel that never stops.  The only way to get out of it is to do a 'Force Quit.'
I believe that I caused this problem after I did the following:
* I was in Preset Manager and had selected all brushes.
* Curiosity got the best of me and I selected "Rename" (thinking it would rename the group of brushes)
* Instead, it wanted me to rename EACH brush individually.  I clicked cancel but then it would move the the next brush in the list.  Since I have hundreds of brushes, I knew this would take forever.  There was no way to cancel the process so I did a Force Quit.  That's when I started having the problem described in the first paragraph.
I'm new to Mac (having been a pc guy for 30 yrs).  I don't have a clue where to start on this.  Is there anyway to reinstall PS???

kar89 wrote:
I downloaded OS X 10.9.5 and when I attempt to load the program from OS X 10.7.5 I click on the install icon and nothing happens. How do I install the upgrade? Can I upgrade from Lion to Mavericks? Here are my specs:
Sounds like you downloaded the OS X Mavericks 10.9.5 Update or Combo Update. Neither will work on a version of OS X prior to OS X Mavericks. Those are only used to update an existing install of OS X Mavericks. The Combo will update any version from 10.9.0 thru 10.9.4. The Update will only update version 10.9.4.
You need the full installer of OS X Mavericks from the App Store. However, the App Store no longer offers OS X Mavericks. Yosemite is the new FREE OS X.

Similar Messages

  • Hi, My Mac Mini 2006 early core Duo hangs when i try to connect wirlessly to ZyXEL VMG B Series i am using fresh install Mac OS 10.6.3 2Gb of RAM

    Hi, My Mac Mini 2006 early core Duo
    hangs when i try to connect wirlessly to
    ZyXEL VMG B Series.
    I am using fresh install Mac OS 10.6.3 with
    2Gb of RAM.
    The same issue when i try to hooked up with LAN cable.
    Any tips and adviced will be very very welcome, thanks in advanced to everyone!

    Hey there cutyscar,
    It sounds like you are unable to connect to your router either by Wi-Fi, or ethernet. I would recommend trying the troubleshooting outlined in this article named:
    Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
    http://support.apple.com/kb/ts1317
    Start with this step, and work your way down as needed:
    Check all cables and power supplies
    Make sure all the cables related to the modem are plugged in and firmly inserted. This includes the modem's power cord, the cable from the modem to the computer, and the cable from the modem to the outlet. To be sure a connector is properly inserted, disconnect and reconnect it. Check to see if the cables have been cut, chewed, or otherwise damaged.
    If you have any hubs or routers, check their cables and power supplies. If you have more than one power supply available for a type of hub or router, try swapping the power supplies. A defective power supply may affect network traffic.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Photoshop CS3 is now closing when I attempt to save any file on our network.

    Photoshop CS3 is now closing when I attempt to save any file on our network.
    This has been occuring for the past few months.  I have 8 years with this not happening on this machine and this network.  I now have to save to my desktop, then move the file to the correct folder, re-open it and work from there.  Any ideas to fix this??

    Hi Andy,
    This workflow might be working for you however it is not the ideal or correct workflow.
    Please refer to below article.
    https://helpx.adobe.com/photoshop/kb/networks-removable-media-photoshop-cs5.html
    Photoshop is not supported while working with network drives. I would recommend an external or a local drive instead.
    Thank you for posting on Adobe Forums.

  • I downloaded OS X 10.9.5 and when I attempt to load the program from OS X 10.7.5 I click on the install icon and nothing happens. How do I install the upgrade?

    I downloaded OS X 10.9.5 and when I attempt to load the program from OS X 10.7.5 I click on the install icon and nothing happens. How do I install the upgrade? Can I upgrade from Lion to Mavericks? Here are my specs:
    MacBook Pro
    15 – Inch Core 2 Duo
    Processor 2.33 GHz Intel Core 2 Duo
    Memory 4 GB 667 MHZ DDR2 SDRAM
    Graphics ATI Radeon X1600 256 MB
    Serial Number W8****W0L
    Software Mac OS X Lion 10.7.5 (11G63)
    Is my system capable of running the new upgrades?
    <Personal Information Edited by Host>

    kar89 wrote:
    I downloaded OS X 10.9.5 and when I attempt to load the program from OS X 10.7.5 I click on the install icon and nothing happens. How do I install the upgrade? Can I upgrade from Lion to Mavericks? Here are my specs:
    Sounds like you downloaded the OS X Mavericks 10.9.5 Update or Combo Update. Neither will work on a version of OS X prior to OS X Mavericks. Those are only used to update an existing install of OS X Mavericks. The Combo will update any version from 10.9.0 thru 10.9.4. The Update will only update version 10.9.4.
    You need the full installer of OS X Mavericks from the App Store. However, the App Store no longer offers OS X Mavericks. Yosemite is the new FREE OS X.

  • TS3999 I am unable to sync my Outlook calendar with my Iphone. I have noted that the Icloud Outlook add in is not ticked When I attempt to load it from the designated file nothing happens Can anyone help with this? Robyn

    I am unable to sync my Outlook calendar with my Iphone. I have noted that the Icloud Outlook add in is not ticked When I attempt to load it from the designated file nothing happens Can anyone help with this? Robyn

    Re: check that the appointments in my phone are going into iCloud calendars....exactly how do I do this?  I fear this is a really stupid question!
    My iCloud account is set up with my Apple ID as one email account (for example [email protected]) which is the email account I use to sign up for internet sites like Amazon, Apple,etc, so that I can differentiate vendors/mass emails.  But my default calendar on my iPhone is in a different email name (ie [email protected]) which I use for most communications to friends, relatives, etc. and it is this account that holds most of my appointments.  To further complicate things I have other email accounts that I use for business/professional and community work.  If I want all my calendars to show on my iPhone AND sync to my iCloud, do I set this at the phone level or the iCloud level?  or both?   
    Let me clarify....It looks like if I go into appointments that I previously set up through my personal account (ie above [email protected]) and edit the entry on my iPhone, selecting the iCloud "home" calendar within the entry, it will then sync to my iCloud account, no problem....do I have to do this to EVERY entry I have? or is there  a way to name my personal account as one to sync to iCloud?

  • Application manager hangs when closing

    Macbook pro 2.66 GHz i7 OS 10.6.8
    CS6 Production Premium
    Updates complete, Application Manager hangs and does not close when clicking "close". Force quit, on re-launch all apps up-to-date.
    Is this a known bug?
    Any input appreciated.
    --David

    The other thread you are referring to was specific to a standard user account.  Since you have indiciated you are using an Administrator account I have removed your post to avoid confusion for the other topic.
    It looks like you are using an older version of the Adobe Application Manager.  Please go to http://www.adobe.com/downloads/ and you can find a link to the current version of the Adobe Application Manager in the bottom right hand corner.

  • Photoshop cs6 preset manager does not show all the basic brushes

    So I'm having this problem: The brush panel shows all the default brushes, but the Brush Presets panel & the Brush Preset manager do not, intact the last brush they show is "100 Rough Round Bristle". If I want to load any other brush set, it over writes any brushes that appear after "100 Rough Round Bristle".
    Need some serious help as my workflow is being severely hampered.
    Cheers!
    Arlen

    it only shows the first 67 at max... if you delete anything before the 100 Rough Round, that becomes the new default number. It's like the rest of the brushes don't exist. Although I can select them in the Brush Panel. It's strange.

  • Kernel Panic when i attempt to load music/videos

    when i try to load any mp3s or movie files onto my ipod, i get the kernel panic screen (4 languages, hold down power blah blah blah)... what can i do to make this not happen?

    I am in the same boat as you guys.
    I have a 60 gig Black 5G iPod. Loaded primarily with video.
    It is syncing to a 10.4.3 iMac G5.
    I have been using the iPod trouble free for 2 weeks now. Syncing everyday, removing and adding video. No problems.
    Last night I attempted to add a number of videos that would have filled up the device. Once I was syncing the last, or second to last, video and the counter in iTunes showed there was about a gig of space left available on the iPod I would get a Kernel Panic (grey screen, power button, 5 languages, telling me to restart).
    This happened twice before I removed a handful of videos to keep the iPod from filling up. This seemed to relieve the problem and the iPod synced like normal.
    Otherwise the iPod has been performing as expected, video playback is great, syncing otherwise is fine.
    My panic.log is very similar to yours rdstuart
    Wed Jan 4 00:18:10 2006
    panic(cpu 0 caller 0x00247294): BlockAllocateContig: allocation overflow on "Da vPod"
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x00095698 0x00095BB0 0x0002683C 0x00247294 0x00246D8C 0x00245CC0 0x0022875C 0x000FBD60
    0x000F5338 0x0027D238 0x0027D060 0x002A9BF4 0x000ABE30 0x00000000
    Proceeding back via exception chain:
    Exception state (sv=0x3A854280)
    PC=0x90053AEC; MSR=0x0000D030; DAR=0xE00FF000; DSISR=0x42000000; LR=0x90B51504; R1=0xF0305B20; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT 2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
    So, a follow up question, anyone reading this thread completely (and I mean completely, save for a few megs) maxed out their 5th gen iPod? 30 or 60 gig qualifies as it seems to occur on both models.
    Basically I am trying to determine the root of the problem. Is this a serious hardware problem which would warrant an exchange?
    Or possible a problem/flaw in the database structure of the iPod that could be rectified via a firmware update?
    Has anyone talked with Apple Tech Support about this issue?
    My iPod is absolutely great otherwise, none of the many complaints others in the forum have had, and so if this is just a case of leaving a gig or so free on the iPod until a fix materializes so be it! I would rather avoid an unnecessary exchange if possible.
    I just want to avoid major hardware issues downs the line naturally.
    Thanks for your help and advice in advance.

  • HT1926 When I attempt to load Itunes I get the message "Service 'Apple Mobile device' failed to start. Verify that you have sufficient privileges to start system." What does this mean?

    When I attempt to install Itunes on Windows 7, I get the message "Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services." What does this mean?

    So many people are having this problem! Doehunter's instructions here worked for me!  Hope this helps. https://discussions.apple.com/message/23824640#23824640

  • Firefox 36.0.1 on Mac running Yosemite 10.10.2 hangs when trying to open Add-ons Manager

    I am running Firefox 36.0.1 on an iMac with Yosemite 10.10.2. Firefox is working fine except that it hangs and forces me to Force Quit the application every time I try to choose Add-ons from the Tools menu. I have never had this problem before. This problem has happened for three straight days with my iMac being restarted several times. The same problem happens when trying to access Add-ons from the Open menu icon. Does anyone have a solution? Thanks!

    If you put this into the url bar: about:addons
    does this also happen? If not, add the icon back and remove it to reset it.
    *[[Customize Firefox controls, buttons and toolbars]]
    Does it also happen in Safe Mode?
    *[[Troubleshoot Firefox issues using Safe Mode]]

  • Photoshop and Illustrator sometimes hang when working together (CS 5.5)

    Hi all,
    I'm working with Adobe Creative Suite Design Premium 5.5 and sometimes, when I have Photoshop and Illustrator opened together, if I try to open something a little more complex (but not to heavy), one of the programs hang or freeze.
    This is a Windows 7 (64bits) Service Pack 1 environment, on a HP Workstation 2.67Ghz Quad with 8GB of RAM, using a NVIDIA Quadro FX 3800. At a first glance - and regarding the files usage - it doesn't seem to have a reason to happen.
    I've updated the program versions and let Photoshop use more than 60% of the available RAM. When this happens, 50% of the physical RAM is available.
    Besides having these two apps running, I have Outlook 2010, Linotype Font Explorer Pro and some LAN policies active.
    Does anyone had a similar problem that could kindly help?
    Many thanks,
    Tiago

    What does Windows Event Viewer say about the matter? if it is as arbitrary as you say, then it's most likely network issues or graphics issues. In the latter case simply install a suitable driver and configure it properly, in case of network issues (to which in particular Ilklustrator is extremely sensitive), store the files on a local harddrive.
    Mylenium

  • Oracle Wallet Manager hang when import a trusted cert

    i'm facing problem when import 1 of my client's cert.
    it hang and not responsive when i try to import it.
    the oracle wallet manager version is 10.1.0.4.2
    my client's cert is 512bit self signed
    Message was edited by:
    kinwah.lai

    Hi,
    To use it, you need to convert the cert into binary format. Then it is simply dumpasn1 bincert.cer. This dumpasn1 output is obtained from your cert:
    0 30 524: SEQUENCE {
    4 30 438: SEQUENCE {
    8 A0 3: [0] {
    10 02 1: INTEGER 2
    13 02 17: INTEGER
    : 00 C4 CE 12 F5 0D A9 0A 4C C1 56 80 3F B0 01 7C
    : 99
    32 30 13: SEQUENCE {
    34 06 9: OBJECT IDENTIFIER
    : sha1withRSAEncryption (1 2 840 113549 1 1 5)
    45 05 0: NULL
    47 30 126: SEQUENCE {
    49 31 11: SET {
    51 30 9: SEQUENCE {
    53 06 3: OBJECT IDENTIFIER countryName (2 5 4 6)
    58 13 2: PrintableString 'MY'
    62 31 17: SET {
    64 30 15: SEQUENCE {
    66 06 3: OBJECT IDENTIFIER localityName (2 5 4 7)
    71 13 8: PrintableString 'Malaysia'
    81 31 35: SET {
    83 30 33: SEQUENCE {
    85 06 3: OBJECT IDENTIFIER organizationName (2 5 4 10)
    90 13 26: PrintableString 'Carrefour.net V22 Malaysia'
    118 31 55: SET {
    120 30 53: SEQUENCE {
    122 06 3: OBJECT IDENTIFIER commonName (2 5 4 3)
    127 1E 46: BMPString
    : '[email protected]'
    175 30 30: SEQUENCE {
    177 17 13: UTCTime '070309053122Z'
    192 17 13: UTCTime '090309053122Z'
    207 30 126: SEQUENCE {
    209 31 11: SET {
    211 30 9: SEQUENCE {
    213 06 3: OBJECT IDENTIFIER countryName (2 5 4 6)
    218 13 2: PrintableString 'MY'
    222 31 17: SET {
    224 30 15: SEQUENCE {
    226 06 3: OBJECT IDENTIFIER localityName (2 5 4 7)
    231 13 8: PrintableString 'Malaysia'
    241 31 35: SET {
    243 30 33: SEQUENCE {
    245 06 3: OBJECT IDENTIFIER organizationName (2 5 4 10)
    250 13 26: PrintableString 'Carrefour.net V22 Malaysia'
    278 31 55: SET {
    280 30 53: SEQUENCE {
    282 06 3: OBJECT IDENTIFIER commonName (2 5 4 3)
    287 1E 46: BMPString
    : '[email protected]'
    335 30 92: SEQUENCE {
    337 30 13: SEQUENCE {
    339 06 9: OBJECT IDENTIFIER rsaEncryption (1 2 840 113549 1 1 1)
    350 05 0: NULL
    352 03 75: BIT STRING 0 unused bits, encapsulates {
    355 30 72: SEQUENCE {
    357 02 65: INTEGER
    : 00 86 75 E6 DA C8 18 CB 77 44 C5 E9 48 F7 45 41
    : 85 52 8E 70 E7 D1 D0 C5 7E 48 5D BC AB 9E C9 99
    : CC 70 FC 18 F2 E4 12 78 38 7D CA 06 3C 18 64 E6
    : FD 6B 3A CD 00 02 2B A0 67 CB F0 86 1C 13 0F 43
    : D1
    424 02 3: INTEGER 65537
    429 A3 15: [3] {
    431 30 13: SEQUENCE {
    433 30 11: SEQUENCE {
    435 06 3: OBJECT IDENTIFIER keyUsage (2 5 29 15)
    440 04 4: OCTET STRING, encapsulates {
    442 03 2: BIT STRING 0 unused bits
    : '00000101'B
    : Error: Spurious zero bits in bitstring.
    446 30 13: SEQUENCE {
    448 06 9: OBJECT IDENTIFIER
    : sha1withRSAEncryption (1 2 840 113549 1 1 5)
    459 05 0: NULL
    461 03 65: BIT STRING 0 unused bits
    : 51 13 3B 3C 7A EA 9A 97 30 FA F1 2E E5 A4 CD 77
    : D6 02 6D BF 1B 4D E3 F3 5F 93 3F D7 96 0E 40 69
    : 8A 29 B4 B1 B5 C0 79 B8 4C 6E 96 C6 15 26 61 F7
    : 4E D5 27 9C 71 B6 5D 92 E6 3B 71 6E 76 02 E1 97
    0 warnings, 1 error.
    As you can see, there is an error: Error: Spurious zero bits in bitstring. For this particular instance, OWM cannot import this cert properly. Please ask your tp to provide a self signed cert that complies with the ASN1 standard.
    Eng

  • Photoshop Elements 6 now hanging when entering music to slideshow.

    I haven't created a slideshow in a while and attempted to do so last night.  Here are some specifics that I am hoping someone may be able help me figure out the issue:
    I am running windows vist home premium SP2, 2 gb ram, 2 ghz intel processor and 160 gig hard drive.  I have elements 6 installed.
    I've previously been able to create and output slideshows without issue but that all changed last night.
    I entered the create slideshow and selected a few pictures from the catalog.  I clicked on the preview and the slideshow worked fine.  I then added an MP3 to the slideshow.  At this point....if I hit the preview button again the system hangs.
    I check the process and Elements is using between 50% and 90% cpu, but never advances.
    I tried to unintstall and reinstall with no luck.
    I then downloaded the trial version of version 8 and I get the same results.
    The only thing I can figure is different between the last time it worked correctly is that I am now on SP2 instead of SP1.
    Any help would be greatly appreciated.

    the problem seems to be with the mp3,could please specify the size of the audio file which you were using  and please try an audio file with a smaller size.

  • PP-CC is hanging when I attempt to import/OSX10.9, 8 core, 16G RAM

    First, I've been running system 10.9 for 2 months.  I did that upgrade and then went to Adobe CC for the latest version of Premiere which I love.  Today, APP-CC starts without issue but when I go to import clips, the browse screen dissappears and it hangs.  I've started and re-stared the machine, I downloaded a "bug fix" from CC for PP-CC, I even gave up and reinstalled CS6 PP so I could just work but now that won't even work.  There is also no software update available for my Mac at this time.  I'm running a MacPro 8 core machine with 16G RAM, plenty of hard drive space, and I keep scratching my head.  Why would all this work without issue for two months and then just stop working????  At the hang instant, all of the options across the top of the toolbar turn grey except for the "start dictation..." option, and you have to force quit to do anything after that.  I've restarted maybe 9-10 times, before and after the download of the "bug fix."  I want to make sure you understand, I had the problem prior to the "big fix."
    5:00pm EST- now I have discovered that Photoshop is also hanging...    now I'm wondering if I have a hardware issue or if it might be an issue with CC?
    Message was edited by: patrick murphy-racey

    Why would all this work without issue for two months and then just stop working????
    This statement usually accompanies changes to other things on the system and not necessarily any changes to the program in question.  The best advice I have for you to get help is to answer *all* of the questions in the FAQ link below as completely as you can.  You've already provided some answers, but hopefully a clue will emerge when you add the rest of the information:
    Adobe Forums: FAQ: What information should I provide when asking a question on this forum?
    Jeff

  • Photoshop elements 9 ejects disk when I attempt to install.

    I have Win 7 64 bit computer that meets Photoshop specifications.
    When I insert the DVD install disk, it ejects the disk when I double click to open and install.
    help appreciated
    Perhaps Adobe should let me download the program from their site?
    thanks
    tery

    http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-7-8-9-downloads.html
    Mylenium

Maybe you are looking for

  • How to enlarge print copies on HP Office Jet 6600?

    How?

  • How to make a slide-out pane?

    Hi forum, who can help me again? ;) This is an example: http://docs.oracle.com/javafx/1.3/howto/Slideout-Panel-Tutorial.html Edited by: 899956 on 2-dic-2011 6.53 Edited by: 899956 on 2-dic-2011 6.54

  • Huge Number of Deps when Upgrading KDE packages from 4.14 to 14.12

    Hi, I know the KDE upgrade issue is "flavor of the day" at the moment and I have read other threads on it; but so far have not found info which applies to my situation. Note: I only use a FEW KDE apps like Krusader, Yakuake, Konsole, Kcalc and do NOT

  • XA RESOURCE NOT RESPONDING IN PROD

    Hey guys ...I have seen posts for this kind of errors ..but didn't find any reason for what is causing this problem...basically once this error starts happening the server becomes unresponsive...any help is appreciated as this is happening in product

  • Problem installing Premiere Elements 7

    I'm trying to install Premiere Elements 7 and it keeps rolling back the actions and I can't install the software. The indicator bar appears to reach the end and then it stops and doesn't complete the installation. I've tried to load the software on 3