Mac os x 10.3 or later cannot be found on the computer

i have a mac g5, but i dont know what OS it is. When i turn it on it just goes to "mac is starting up" and just stays there. but i have a os x Triger disc and when i try to install it it say " mac os x 10.3 or later cannot be found on this computer" i and that i need to have 10.3 or later to upgrade to 10.4. can any one help?

On a G5 (iMac oder PowerMac) you can go up to Mac OS 10.5 Leopard. Unfortunately Apple is actually only selling 10.6 Snow Leopard, which didn't work on your computer. So the best thing is get a used 10.5 full install disc.
Be aware: There are grey installations discs that comes bundle with a new Mac. That disc only works with the model it was sold with. (iMac -> iMac, iMac ≠ PowerMac, PowerBook ≠ iMac ....) So when you buy a 10.5 installation disc be sure it's not a bundled grey installation disc, instead get a separate sold one.
Or: you can have a look if you find the 10.3 install disc, that comes with your G5. Install that 10.3 and afterward update to 10.4 with the drop-in disc you have.

Similar Messages

I have purchased and installed acrobat XI pro. When I run it a window pops up saying the the serial number I have provided is valid but a qualifying product cannot be found on the computer

I have purchased and installed acrobat XI pro. When I run it a window pops up saying the the serial number I have provided is valid but a qualifying product cannot be found on the computer

YOu have purchased or been sold an upgrade from Acrobat 9 or 10. You simply need to prove you own that old version using its serial number. be sure to keep both serials forever.

HP Photosmart B110 series cannot be found on the computer

Hi
I have a HP photosmart b110 series and the computer will not find it on my network. The printer is connected to the same wireless network as my computer is and it still will not connect. Is there anyway to fix this?
Thanks in advance.

Let's try here. Wireless Printing Help
http://www.hp.com/global/us/en/wireless/index.html?jumpid=ex_r11400_go_wirelessprinting
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Error while running: J2SE 1.4 or later cannot be found

Hi,
I just installed Java studio Enterprise 8. Installation is smooth.
When I tried to run, it throws an error saying "J2SE 1.4 or later cannot be found on your machine".
I know it is straight forward. But, all my other applications are able to find the J2SE installation(1.5.0_05).
I double checked PATH and CLASSPATH environment variables. They are pointing to "bin" and jre\bin directories of this jdk.
Do I have to change any conf files for this to run?
regards
varma

I've two questions:
1) Does this error come up during installation, or when you try to run the IDE?
2) If you look at <ide-root-dir>/etc/jstudio.conf file, does it have a default_jdkhome entry? If so where does it point to?
A quick solution would be to start the IDE with --jdkhome <path-to-jdk> command line parameter. It would tell the IDE luancher where exactly your java is installed and it will use the supplied path.

J2SE 1.4 or later cannot be found, not even after setting --jdkhome

Downloaded jstudio_ent8_dl-win.exe today and installed.
I am using XP Pro SP2
When I just run from the start menu (command is "C:\Sun\jstudio_ent8\ide\bin\runidew.exe") I get the error: "J2SE 1.4 or later cannot be found on your machine".
I've read some other postings on this case. One solution was to start the ide with parameter --jdkhome set to the jre. Since I have my jre in "C:\Program Files\Java\jre1.5.0_06" I add
--jdkhome "C:\Program Files\Java\jre1.5.0_06" to the command, so my full command is:
C:\Sun\jstudio_ent8\ide\bin\runidew.exe --jdkhome "C:\Program Files\Java\jre1.5.0_06"
However nothing happens! When looking in the Task Manager I think it reacted for a short while (less than a second) but I couldn't see which process that was starting.
I have rebooted after the install. Still no luck.
What puzzled me in the installation was that the install prompted me for a location where to put jre1.5.0_04. Obviously it didn't find that I had a jre1.5.0_06 version.
Any ideas where I should check the settings or whatever?
Best Regards
Anders

Hi Anders,
can you try to specify path to JDK not JRE in --jdkhome command line option?

The serial number you entered is valid, but a qualifying product cannot be found on this computer.

Hi
We try to upgrade a mac (OS X 10.6.8) version of Acrobat Pro 9 to Acrobat X Pro.
When installing Acrobat Pro X - i get next annoucement: The serial number you entered is valid, but a qualifying product cannot be found on this computer.
And install is asking next: select a product (there is only: Adobe Acrobat 7 Standard Macintosh).
What to do next???

You need to contact Adobe support for this , they wil help in installing the software and will perform the unlocking for you.\
Here isthe link to contact adobe :- http://adobe.ly/yxj0t6
For details on your issue you can have the look on the link:- http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html

The specified store provider cannot be found in the configuration, or is...

Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
All,
I have a solution developed in Visual Studio 2012 targetting .Net 4.0. Simplified: Startup project is a WPF library and supporting this library is another project that uses Entity Framework to retrieve data. I have copied the connection strings from my EF project to my startup project, and everything seems to work fine on the development machine.
However, as sson as this project is run on a user's desktop they get the error:
System.ArgumentException
The specified store provider cannot be found in the configuration, or is not valid.
Stack trace (transcribed from screenshot, so there might be typos):
at.system.Data.EntityClient.EntityConnection.GetFactory(String providerString)
at System.Data.EntityClient.EntityConnection.ChangeConnectionString(String newConnectionString)
at System.Data.EntityClient.EntityConnection..ctor(String connectionString)
at System.Data.Entity.Internal.LazyInternalConnection.InitializeFromConnectionStringSetting(ConnectionStringSettings appConfigConnection)
at System.Data.Entity.Internal.,LazyInternalConnection.TryInitializeFromAppConfig(String name, AppConfig config)
at System.Data.Entity.Internal.LazyInternalConnection.Initialize()
at System.Data.Entity.Internal.LazyInternalConnection.CreateObjectContextFromConnectionModel()
at System.Data.Entity.Internal.LazyInternalContext.InitializeContext()
at System.Data.Entity.Internal.InternalContext.GetEntitySetAndBaseTypeForType(Type entityType)
at System.Data.Entity.Internal.Linq.InternalSet` 1.Initialize()
at System.Data.Entity.Internal.Linq.InternalSet` 1.get_InternalContext()
at System.Data.Entiy.Infrastructure.DbQuery` 1.System.Linq.IQueryable.get_Provider()
at System.Linq.Queryable.Where[TSource](IQueryable` 1 source, Expression` 1 predicate)
at MyEntityNameSpace.MyEntitySet.LoadData()
I've already verified that Oracle.DataAccess is referenced in my EF project, and I'm including oci.dll, orannzsbb11.dll, oraociei11.dll, and OraOps11w.dll in my main library (fat installation).
This configuration worked when using the older ADO.Net DataSets, but now I want to use EF 4.4 (DataBase first/model first/whatever it's not Code First) because it's just easier to code against. So obviously I'm missing something when it comes to deploying my solution. Any ideas?
Note that this is a desktop application using MS OneClick.

Same issue:
The specified store provider cannot be found in the configuration, or is not valid. ---> System.ArgumentException: Unable to find the requested .Net Framework Data Provider. It may not be installed.
You mention "Sounds like the client system doesn't have an Oracle client installed."
I am using Win Server 2008 R2. I have installed what i think is the right client. How do i tell?
What is the right client? Where do i get it?

I deleted iTunes when it said "iTunes could not back up iPhone because the backup could not be saved on the computer"and now it wont let me install it again and keeps saying "itunes cannot be installed because the file cannot be found in the cabinet "

iTunes told me to delete my backup folder when I was having problems syncing my phone to my computer. After that it wouldn't work at all. After trying and trying I deleted iTunes when it said "iTunes could not back up iPhone because the backup could not be saved on the computer"and now it wont let me install it again and keeps saying "itunes cannot be installed because the file cannot be found in the cabinet ". What the **** itunes? Nothing is working!!
I wanted to update my iTunes so I could sync my phone to my computer and update my phones software so I can use the latest apps that need a 4.2 or higher.
This is not fun for me so if anyone knows what I can do to fix this please help. Is it possible to download the "cabinent file" with the lastest iTunes?
Thank you.
-Kait
My phone is the iPhone4 and my computer is a Windows Vista

I doubt that corrupt files are the problem. It is more likely a space or permissions issue. Is the hard-drive on which iTunes is stored close to capacity? Do you (or the particular user profile you have logged on with) have the requisite permissions to save to that drive?
Otherwise, do you get an error code? This might point us in the right direction.

HT2497 I just purchased the 2TB TC and set it up on bridge mode to my att verse which is connected via ethernet cable. The TC is continually blinking amber and an error message states that a wireless network cannot be found but the uverse is functioning

I just purchased the 2TB TC and set it up on bridge mode to my att verse which is connected via ethernet cable. The TC is continually blinking amber and an error message states that a wireless network cannot be found but the uverse is functioning great. The network name I assigned to the TC is also not appearing among available networks. How do I remedy this, please?

What OS on the computer you are using to setup the TC?
Did you turn on ipv6 for wireless to link-local... this is essential for network access now??
Try power cycling the network.. start up in correct order.. uverse.. 2min wait.. TC.. 2min wait.. computer.
No luck factory reset and start over. Use ethernet cable as well to the computer to help it.
No luck I can show you manual method.

The specified store provider cannot be found in the configuration?

I got the error "The specified store provider cannot be found in the configuration, or is not valid"
while excuting the following command:
E:\Windows\Microsoft.NET\Framework\v4.0.30319\EdmGen.exe /nologo /language:CSharp
/mode:ViewGeneration /inssdl:$(TargetDir)Entities.ssdl
/incsdl:$(TargetDir)Entities.csdl /inmsl:$(TargetDir)Entities.msl
/outviews:$(ProjectDir)Entities.Views.cs
this is to pre_generate views to improve Entity framework performance, itruns well for SqlServer.
What is the issue? I checked in machine.config, it seems ok:
<DbProviderFactories>
*<add name="Oracle Data Provider for .NET" invariant="Oracle.DataAccess.Client" description="Oracle Data Provider for .NET" type="Oracle.DataAccess.Client.OracleClientFactory, Oracle.DataAccess, Version=4.112.3.0, Culture=neutral, PublicKeyToken=89b483f429c47342"/>*
<add name="Microsoft SQL Server Compact Data Provider" invariant="System.Data.SqlServerCe.3.5" description=".NET Framework Data Provider for Microsoft SQL Server Compact" type="System.Data.SqlServerCe.SqlCeProviderFactory, System.Data.SqlServerCe, Version=3.5.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"/>
</DbProviderFactories>

Hey,
Can you check if the line: DbProviderFactory factory = DbProviderFactories.GetFactory("Oracle.DataAccess.Client"); works in a simple console app?
I had the same problem when I had installed both x86 and x64 versions of ODAC. There are two workarounds for x86&x64 issue here[http://connect.microsoft.com/VisualStudio/feedback/details/728483/edmgen-4-0-with-oracle11g-dac-win-7-x64] .

Item cannot be found in the collection corresponding to the requested name or ordinal.

Hi,
I am using Dreamweavers User Authentication tool, and all seems to be working except when I press the 'Submit' button I get the following error;
ADODB.Fields error '800a0cc1'
Item cannot be found in the collection corresponding to the requested name or ordinal.
/coding/test_login.asp, line 35
As far as I can tell the user login works, as I can assess the restricted page, if I manually type in the URL.
My code is listed below;
<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>

<%
' *** Validate request to log in to this site.
MM_LoginAction = Request.ServerVariables("URL")
If Request.QueryString <> "" Then MM_LoginAction = MM_LoginAction + "?" + Server.HTMLEncode(Request.QueryString)
MM_valUsername = CStr(Request.Form("usercode"))
If MM_valUsername <> "" Then
Dim MM_fldUserAuthorization
Dim MM_redirectLoginSuccess
Dim MM_redirectLoginFailed
Dim MM_loginSQL
Dim MM_rsUser
Dim MM_rsUser_cmd
MM_fldUserAuthorization = """group"""
MM_redirectLoginSuccess = "yes.asp"
MM_redirectLoginFailed = "no_access.asp"
MM_loginSQL = "SELECT usercode, epros_password"
If MM_fldUserAuthorization <> "" Then MM_loginSQL = MM_loginSQL & "," & MM_fldUserAuthorization
MM_loginSQL = MM_loginSQL & " FROM DBA.[user] WHERE usercode = ? AND epros_password = ?"
Set MM_rsUser_cmd = Server.CreateObject ("ADODB.Command")
MM_rsUser_cmd.ActiveConnection = MM_Conn_PSCRM_Demo_STRING
MM_rsUser_cmd.CommandText = MM_loginSQL
MM_rsUser_cmd.Parameters.Append MM_rsUser_cmd.CreateParameter("param1", 200, 1, 255, MM_valUsername) ' adVarChar
MM_rsUser_cmd.Parameters.Append MM_rsUser_cmd.CreateParameter("param2", 200, 1, 255, Request.Form("password")) ' adVarChar
MM_rsUser_cmd.Prepared = true
Set MM_rsUser = MM_rsUser_cmd.Execute
If Not MM_rsUser.EOF Or Not MM_rsUser.BOF Then
    ' username and password match - this is a valid user
    Session("MM_Username") = MM_valUsername
    If (MM_fldUserAuthorization <> "") Then
      Session("MM_UserAuthorization") = CStr(MM_rsUser.Fields.Item(MM_fldUserAuthorization).Value)
    Else
      Session("MM_UserAuthorization") = ""
    End If
    if CStr(Request.QueryString("accessdenied")) <> "" And true Then
      MM_redirectLoginSuccess = Request.QueryString("accessdenied")
    End If
    MM_rsUser.Close
    Response.Redirect(MM_redirectLoginSuccess)
End If
MM_rsUser.Close
Response.Redirect(MM_redirectLoginFailed)
End If
%>
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>Untitled Document</title>
</head>
<body>
<form action="<%=MM_LoginAction%>" method="POST" name="logon">
<input name="usercode" type="text"><br>
<input name="password" type="text">
<input type="submit" name="Submit" id="Submit" value="Submit">
</form>
</body>
</html>
Any help greatly accepted.

There are several workarounds you could use. I would start by setting the local variable back to the actual column name
MM_fldUserAuthorization = "group"
and then modify the reserved word directly SQL. See if this works:
If MM_fldUserAuthorization <> "" Then MM_loginSQL = MM_loginSQL & "," & """MM_fldUserAuthorization"""
If that line doesn't work, then you might need to concatenate the quotes around the variable, or try a combination of single/double quotes.
Also be warned that once you modify DW's generated code, you probably will not be able to maintain the code in DW server behavior wizard. You'll need to maintain by hand.
Good luck.

The mapping: XML_NV you are trying to load cannot be found in the classpath

Hi Experts,
We have a EDI to JDBC scenario wherein the incoming EDI files (ANSI X12) will picked up by XI and sends to Backend system and it was working fine. Today when i check the file folder, the EDI files are not picking up by XI system and when I check the Communication channel the below is the error message. Can anybody let me know how to workaround for this issue?
Error: javax.resource.ResourceException: --- Conversion of synchronous request from module chain ended with errors ---[Error:ID=1010;LEVEL=1] BICMapping runMapping() The mapping: XML_NV you are trying to load cannot be found in the classpath! Maybe you forgot to compile or to activate the mapping! DESCRIPTION: BICMapping Error: The mapping [not specified] you are trying to load cannot be found in the right path! Maybe you forgot to compile or to activate the mapping!
Your help is highly appreciated.
Regards
Faisal

Dear Abdul
If the mapping is there and the PI system is throwing an error that "Mapping not Found" then please try refreshing the cache.
First try Partial and if it does'nt work then go for Full Cache Refresh.
Alternatively if yours is a Java mapping, try relading the code (zip file) and activate the channel.
Sourabh

"The file 'Acknowledgements.rtf' cannot be installed because the file cannot be found in the cabinet file 'iTunes.cab'. Is there something wrong with the latest installer? (11.3.1)

Getting error message as shown: "The file 'Acknowledgements.rtf' cannot be installed because the file cannot be found in the cabinet file 'iTunes.cab'. Is there something wrong with the latest installer? (11.3.1)

Installs fine for me, so I'd guess you got an incomplete or corrupt download. See the Further Information area of Troubleshooting issues with iTunes for Windows updates for direct links and download a fresh copy of the installer.
tt2

SBO Mailer Error - The specified resource type cannot be found in the image file

Hi Experts,
I have created an alert in SBO and selected email and internal option for same. I get internal message however email is not getting delivered, I checked the Event Viewer of Windows and below error is shown for SBOMail.
The description for Event ID 62 from source SBOMail cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Failed to mark records error [-1]
The specified resource type cannot be found in the image file
I can send email from sbo for other documents but the alert is not delivering email.
Please advise.
Thanks
Deepak

Hi Deepak..
Check with these threads...
http://scn.sap.com/thread/966957
http://scn.sap.com/thread/1295818
SBOMail Application log error
SBOMail error in event log
Hope Helpful
Regards
Kennedy

The specified resource name cannot be found in the image file.

Dear Experts,
I have developed an import too and it imports many of the Business Objects from a temporary data base to SAP B1. It was running fine for more than 6 months now.
Currently when the Tool is importing Credit Notes in to SAP B1, the following error is thrown.
The specified resource name cannot be found in the image file.
And I have no Clue about the error. Any one had any experience regarding the above error???
Thanks in Advance,
Vasu Natari.

Hello VAsu,
Somethimes this unexpected, ununderstandable eroor messages caused by corrupted observer dll.
Do a clean up (delete %TEMP%SM_OBS_DLL) folder, and see the result ! (i had several issues in the past with some strange messages...)
Regards
János

Mac os x 10.3 or later cannot be found on the computer

Similar Messages

Maybe you are looking for