MAC OS-X 10.4.11   PRINTER SAMSUNG SCX-4521   SAMSUNG CLX-3185 The process "rastertoqpdl" stopped unexpectedly with status 1

MAC OS-X 10.4.11   PRINTER SAMSUNG SCX-4521   SAMSUNG CLX-3185 The process "rastertoqpdl" stopped unexpectedly with status 1

Hi Paolo,
Might try these two...
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Might try Printer Setup Repair 5.1...
http://www.fixamac.net/software/index.html

Similar Messages

  • Printing Problem - the process "mdns" stopped unexpectedly with status 1

    I have been trying to get my Epson Stylus rX620 to print wirelessly for a while. It actually worked once and printed two separate documents. Then however it decided not to work any longer and it seems that nothing I do changes it. The same error message appears each time in the print monitor:
    the process "mdns" stopped unexpectedly with status 1
    It has printed wirelessly with the same equipment. It is attached to an airport express that is linked to extend my wireless network from an Airport Extreme. It has no problem printing when the USB cable is plugged in directly. I have tried everthing that I can think of. Any ideas??

    Hi John,
    Okay, that was some new information...
    Given that the hub is causing the problem then I would concentrate on testing it. Try connecting the Mac and the printer directly to the hub. Ensure the IP addresses of each device (Mac and Printer) are set to the same subnet (if printing via TCP/IP) or if AppleTalk is being used, make sure it is enabled on both devices.
    You may also have to create a new printer. When you had the printer connected to the USB port of the AEBS, it will have been configured as a local device but printing via a virtual USB port. When the printer was connected to the hub, it would have been configured as a network device.
    If this works then at least you know that the hub and the network cables are okay. The next step would be to ensure the AEBS, the printer and the Mac are all set to use the same protocol.
    If they are all correct then try deleting the printer from the Printer List, running the Reset Printing System function and adding the network printer again. If you are using TCP/IP, you could even try pinging the printer to ensure the path to the printer is open.
    Regards,
    Paul

  • MacBook won't print PDF files, it states The process "pstopdffilter" stopped unexpectedly with status 1

    Question: MacBooK won't print PDF files, after selecting print it states; The process "pstopdffilter" stopped unexpectedly with status 1. I am currently using a HP Deskjet 4400 series printer and it works fine with all our other lap top computers. Thanks for any help.

    The pictwpstops filter on OS X machines, converts the job to straight Postscript before the normal CUPS filters get it.
    If the Adobe APPs have a choice of what kind of PS to send, like Binary or ASCII, try toggling that setting to the opposite of what it is.
    Though, if a reboot fixed it then likely the problem was a remporary bit flip, which may or may not happen again.

  • Unable to print: "hppostprocessing" stopped unexpectedly with status 2

    Hello
    I have several printers installed in my mac and have used since ever without any problem. Lately i tried to install a new HP photo-printer in the printer setup but not managed. The problem is that since then, i can't use any of my previously used printers. For any print i try with any of the printers i used before i get the systematic message:
    "The process "hppostprocessing" stopped unexpectedly with status 2"
    and nothing get printed, the job just dissapears from the queue.
    Any hint?
    thanks in advance
    Diana1

    Thanks a lot for the link.
    The best tip was using Printer Setup Repair:
    http://www.fixamacsoftware.com/software/psr5/PSR5ug/512.html
    This allowed me to realise that all, and only, the HP drivers had disappeared from my Mac- don;t know how...
    Anyway, i installed them from HP:
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=412144&prodNameId=412155&swEnvOID=219&swLan g=8&mode=2&taskId=135&swItem=lj-57300-1
    And know all seems OK
    Thanks a lot
    Diana1

  • Network printer error: the 'ipp' process stopped unexpectedly with status 1

    i have [3] macs connected to my studio airport extreme network. i have a powerbook G4, with our plotter and epson photo R1800 connected to it. my mac book pro can print to the epson just fine, but my primary workstation [G5] will not print to it. i get an error message "the 'ipp' process stopped unexpectedly with status 1". please help, i need to print.
    - all printers are excessable and work via the airport network
    - the printer is available in the shared printer list [duh]
    - as stated above the printer connection trys to open than shuts down, over and over.
    - the epson use to be connected directly to the G5 and worked fine, the G4 as the proper driver and can print files fine.

    You might try checking the Console log (in Utilities/Console) and look to see if you have this error:
    Dec 19 00:22:33 PowerBook crashdump[367]: PrintJobMgr crashed
    Dec 19 00:22:33 PowerBook crashdump[367]: crash report written to: /Library/Logs/CrashReporter/PrintJobMgr.crash.log
    You can also look in the above referenced /Library/Logs/CrashReporter/PrintJobMgr.crash.log file for any Exception for the PrintJobMgr process.
    This currently seems to only affect PPC but not Intel processors. Is this the same for your case?
    Message was edited by: kae

  • My Printer (samsung clx-3185fw) says it connects to my network but I can't seem to print wirelessly.  I could with my netgear but not with my airport extreme, any ideas?

    My Printer (samsung clx-3185fw) says it connects to my network but I can't seem to print wirelessly.  I could with my netgear but not with my airport extreme, any ideas?
    I have restarted all units, disconnected and reconnected

    Hi ryanfromstockbridge,
    I apologize, I'm a bit unclear on exactly what you are seeing when you try to add the printer or print to the printer. If you continue to have issues printing to this wireless printer, you may find the information and troubleshooting steps outlined in the following articles helpful:
    OS X Yosemite: Printing troubleshooting
    Troubleshooting printer issues in OS X - Apple Support
    OS X Yosemite: Add or remove a printer
    Sincerely,
    - Brenden

  • I have iWork '06 on my Mac (running OS 10.6.8). Will I be able to use the Keynote files it produces with the Keynote iPad app?

    Hi,
    I have iWork '06 on my Mac (running OS 10.6.8). Will I be able to use the Keynote files it produces with the Keynote iPad app?
    Thanks,
    Mark

    You probably can open the Keynote '06 files with Keynote for iOS but not the other way around. Files created by the iOS iWork apps can only be opened by iWork '09 apps on the Mac.

  • I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows.  I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC or not?

    I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows.  I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC and finalizing the Windows 7 installation (for the 1st time) or not?
    I am worried that  may lose my information... Appreciate any feedback! Note: already half-way in the process of installing!

    Yes, IF you picked the right partition, as in the Boot Camp partition. If everything is done right you should be able to boot into the Mac side.
    If you already booted into Windows and are at the point of installing the Boot Camp Drivers your already done installing Windows! Yea! All you need to do is just install the drivers and everything should work normal.
    The Windows partition and the Mac partition are seen as two different HD's now as far as the computer knows.
    You can use the Boot Camp control panel in Windows to boot into the Mac side and the Startup Disk in System Preferences on the Mac to switch to Windows. If you can't then press and hold down the Option key untill you get the boot screen.

  • I have two iphones in my house hold one syncs with my MAC Itunes the other doesn't is there a setting that casues the Iphone to stops syncing with Itunes?

    I have two iphones in my house hold one syncs with my MAC Itunes the other doesn't is there a setting that casues the Iphone to stops syncing with Itunes?

    You need to start over with Music. On the iPhone Music screen uncheck sync music. Also, on the Summary screen uncheck "Manually manage music and videos", then sync and it should clear off your phone.
    Next, choose the music you want to sync. If you want to fit more on check "Convert higher bit rate songs to 128 kbps AAC". This will reduce quality slightly, but it won't be noticable unless you are using $300 headphones.

  • Error Adding Printer Samsung CLX-3180 Series OSX 10.9

    MacBook Pro Retinta Display OS X 10.9.4 8 G RAM; 2 GHz Intel Core
    I am having troubling adding a printer to my recently purchased Macbook
    I downloaded the drivers from the Samsung website for the CLX-3180 Series, the software installs (at least it says it did).
    I then go to add printer under printers/scanners and select Samsung CLX-3180 Series from the window. Messages indicate that the software was downloaded and updated and then I get the message "An error occurred while trying to add the selected device; Unable to find an appropriate software on your system after running software update."
    I then reset the printer system, update the system software, restarted the laptop and tried again; still get the same error message.
    No clue what to do next.

    OS X Mavericks: Reset the printing system

  • Trying to print from Macbook 10.4.11 using Brother DCP-J125 printer from usb getting messagge on screen The process " Ratsterobrother 145 " terminated unexpectedly on signal 5. Why cant I print from computer?

    Trying to print from Macbook  OS X 10.4.11 computer to a newly purchased printer which is a Brother DCP-J125 connected through USB.
    When I try to print Iget a message saying : The process " Rasterobrother 145 " terminated unexpectedly on signal 5. What does this mean? Why cant I print? What does this message mean? Is it from my computer or from my printer?
    Any help or advice would be appreciated.

    Trying to print from Macbook  OS X 10.4.11 computer to a newly purchased printer which is a Brother DCP-J125 connected through USB.
    When I try to print Iget a message saying : The process " Rasterobrother 145 " terminated unexpectedly on signal 5. What does this mean? Why cant I print? What does this message mean? Is it from my computer or from my printer?
    Any help or advice would be appreciated.

  • TS1253 airport express can not find a driver for my my Samsung CLX-3185 connected with a USB. I can see the printer and it tells me that driver is available but then it can not find it.

    I can see and download the driver from the net but it does not help the Airport Express. What can I do?

    Thanks for your answer.
    actually, my ipod will not let me activate it with apple id, this happened when the new iOS acutalizó understand that has more security, but do not know what to do.

  • Samsung Multifunc Printer CLX 3185 FW

    Hy everybody.
    I´m fm Sao Paulo, Brazil.
    Do you know if Samsung CLX 3185 FW Laser Printer Multifunc is compatible to Ipad, Iphone ?
    Thks n Rgds,
    Marcio.

    Nope.  Below is the link to the list of airprint printers.
    But look in the app store for an alternate printing app such as printopia, or print and share that route the print job through your computer.
    http://support.apple.com/kb/ht4356

  • Officejet Pro 8600 Plus will not print but is connected and says that the print job is 100% Complete

    Hi All,
    I'm printing from a MacBook Pro using OSX Lion. It says that Officejet Pro 8600 Plus is connected and that the print jop is 
    100% complete except that nothing comes out of the printer. I've done all of the test prints and they've printed just fine.
    I tired all of the troubleshooting steps listed on the support guide and still nothing. HELP!

    Not a reply but another plea for help.
    There seem to be so many people with wireless problems that a) it seems silly to start a new thread and b) which one to enter my own plea.
    -Printer bought about 2~3 weeks into Sept 2012
    -Installed onto Macbook Pro running Lion (full updated at that time)
    -Both wireless scanning from printer to computer and initiated from computer worked fine.
    -Printer, with full choice of duplex, layout etc, worked fine. (Even left 5star feedback somewhere!)
    -Set up eprint. That OK, too. Fine from iPad2 and SE Arc S printing photos.
    -Somewhere along the line it stopped communicating with my MBP
    -Out of interest, since there seemed to be no problems with an Acer laptop running Vista, I booted the MBP from an external drive on which I'd done a backup of my 10.6 system iMac (>300Km away: can't try that). Installed HP software from disc. Seemed fully functional. Odd. Very odd.
    -Restarting with Lion on MBP, tried again. Looks as if it might work, but loses connectivity. Tried manual address on printer.
    -Booting from 10.6 system again, reinstalled Lion on MBP (wondering if conflict between HP and Apple updates)
    -Reinstalled HP software from disc.
    Still didn't work.
    -Brought Lion up to date. Downloaded most recent dmg file from HP. Looked for updates. Have applied firmware update to printer
    8600 doesn't list my MBP as available computer to scan to
    [But all the test pages done whilst in HP Utility, and others, get sent through]
    Am getting rather fed-up with all this; never, ever before have I had so much printer problem.
    There seem to be a number of Lion users out there with the same problem. So far -but very infrequently tried- other machines/systems seem OK, therefore I am coming to the conclusion that it is an Apple<> HP conflict. If not sorted soon the printer will be returned as it is not fit for purpose. I'll revert to using my seldom problematic, non duplex A3 Brother.
    Hrumph
    Please help, someone! Either with a pointer to something I've not yet tried or by analysis and rapid availablity of updated software.
    Thanks,
    Mike W

  • App store icon not working--how can I download app store...tried the process as described on the Mac page...didn't find the update or download.

    My app store icon is not working. Went to Mac page of Apple store to find a new download for it and the process didn't work. No new downloads found.
    Any ideas ?

    Hi James...
    The only way to reinstall the App Store is by downloadiing and installing the Mac OS X 10.6.8 Update Combo
    Restart your Mac after the update is installed. It's ok to do this even though you are already running v10.6.8.

Maybe you are looking for

  • HTML code issues

    I have a topic that was once stable , but now at one point in the top ic the style is correct. But in another area, the style will not take and the HTM L code inserts <span> etc., etc. Here is an example if you look at the H 2 head: <?xml version="1.

  • Displaying reason code in customer ledger FBL5N

    Dear All:                  I have created a new reason code and posting keys are properly configured as reason codes. But text for reason code is not being displayed in customer ledger account against the reversed line item. Please help how to do so.

  • 2 AIR applications directly communicating with each other in real time

    Building a installation that requires 2 different kiosks to communicate with each other. I'd like to use Adobe AIR to create the individual applications. My question is Is it possible for 2 separate AIR applications to DIRECTLY communicate with each

  • ITunes "Forgets" Podcast Subscriptions

    I recently upgraded my MacBook Pro to Snow Leopard (10.6.2) and iTunes has started a disturbing behavior. It forgets podcast subscriptions if there are no episodes in iTunes for it to sync. I listen to several daily podcasts that I delete after liste

  • Minimizing the downtime of Oracle 8i prodn. db on account of encryption.

    Hi, We are in need of encrypting a Oracle 8i database with 170 million records based on 3DES alhorithm.But we cannot afford the downtime of the production database.How to minimize the down time. regards, dilawar.