Mac OS X 10.4.8 doesn't start after upgrade to 10.4.10

Hi everybody!
I've upgraded my Mac OS X 10.4.8 to 10.4.10 and after restart it doesn't start anymore I also have BootCamp installed and Windows boots now even if I choose to start Mac OS. I've tried boot it in safe and verbose mode but computer boots Windows instead (
How could I run Mac OS? Maybe it's possible to return to the "before update" state?
Thanks in advance!

To return to the before state you need to boot from your Tiger installer disk. Run Disk Utilities and Repair Disk. Then choose to do an Archive & Install.

Similar Messages

[SOLVED] Xorg doesn't start after upgrade to 1.17.1

Archlinux i686
Intel Core 2 Duo 6600
01:00.0 VGA compatible controller: NVIDIA Corporation G71 [GeForce 7900 GT/GTO] (rev a1)
After following upgrades:
[2015-02-26 03:27] [PACMAN] Running 'pacman -S mesa mesa-demos mesa-libgl'
[2015-02-26 03:27] [ALPM] transaction started
[2015-02-26 03:28] [ALPM] upgraded mesa (10.4.2-1 -> 10.4.5-1)
[2015-02-26 03:28] [ALPM] upgraded mesa-libgl (10.4.2-1 -> 10.4.5-1)
[2015-02-26 03:28] [ALPM] upgraded mesa-demos (8.2.0-3 -> 8.2.0-4)
[2015-02-26 03:28] [ALPM] transaction completed
[2015-02-26 03:28] [PACMAN] Running 'pacman -S xorg-server xorg-server-common'
[2015-02-26 03:29] [ALPM] transaction started
[2015-02-26 03:29] [ALPM] removed xf86-video-vesa (2.3.2-5)
[2015-02-26 03:29] [ALPM] removed xf86-video-nouveau (1.0.11-2)
[2015-02-26 03:29] [ALPM] removed xf86-video-modesetting (0.9.0-2)
[2015-02-26 03:29] [ALPM] upgraded xorg-server-common (1.16.3-2 -> 1.17.1-3)
[2015-02-26 03:29] [ALPM] upgraded xorg-server (1.16.3-2 -> 1.17.1-3)
Xorg doesn't start after reboot and I found following kernel message:
kernel: [drm:drm_mmap_locked] *ERROR* Could not find map
and /var/log/Xorg.0.log looks like this:
[ 5.591]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 5.591] X Protocol Version 11, Revision 0
[ 5.591] Build Operating System: Linux 3.18.6-1-ARCH i686
[ 5.591] Current Operating System: Linux emeria7 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:59:29 CET 2015 i686
[ 5.591] Kernel command line: root=/dev/disk/by-label/archroot rw
[ 5.591] Build Date: 22 February 2015 12:52:47PM
[ 5.591]
[ 5.592] Current version of pixman: 0.32.6
[ 5.592] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5.592] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5.592] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 26 14:58:35 2015
[ 5.597] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 5.597] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5.598] (==) ServerLayout "ServerLayout0"
[ 5.598] (==) No screen section available. Using defaults.
[ 5.598] (**) |-->Screen "Default Screen Section" (0)
[ 5.598] (**) | |-->Monitor "<default monitor>"
[ 5.599] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 5.599] (**) | |-->Device "Device0"
[ 5.599] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 5.599] (**) Option "BlankTime" "0"
[ 5.599] (**) Option "StandbyTime" "0"
[ 5.599] (**) Option "SuspendTime" "0"
[ 5.599] (**) Option "OffTime" "0"
[ 5.599] (==) Automatically adding devices
[ 5.599] (==) Automatically enabling devices
[ 5.599] (==) Automatically adding GPU devices
[ 5.608] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 5.608] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5.608] (**) Extension "Composite" is disabled
[ 5.608] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5.608] (II) Loader magic: 0x829e700
[ 5.608] (II) Module ABI versions:
[ 5.608] X.Org ANSI C Emulation: 0.4
[ 5.608] X.Org Video Driver: 19.0
[ 5.608] X.Org XInput driver : 21.0
[ 5.608] X.Org Server Extension : 9.0
[ 5.611] (EE) systemd-logind: failed to get session: PID 995 does not belong to any known session
[ 5.611] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 5.612] (--) PCI:*(0:1:0:0) 10de:0291:107d:2a62 rev 161, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xfc000000/16777216, I/O @ 0x0000ac00/128, BIOS @ 0x????????/131072
[ 5.612] (II) Open ACPI successful (/var/run/acpid.socket)
[ 5.613] (II) LoadModule: "glx"
[ 5.616] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5.632] (II) Module glx: vendor="X.Org Foundation"
[ 5.632] compiled for 1.17.1, module version = 1.0.0
[ 5.632] ABI class: X.Org Server Extension, version 9.0
[ 5.632] (==) AIGLX enabled
[ 5.632] (==) Matched nouveau as autoconfigured driver 0
[ 5.632] (==) Matched nv as autoconfigured driver 1
[ 5.632] (==) Matched nouveau as autoconfigured driver 2
[ 5.632] (==) Matched nv as autoconfigured driver 3
[ 5.632] (==) Matched modesetting as autoconfigured driver 4
[ 5.632] (==) Matched fbdev as autoconfigured driver 5
[ 5.632] (==) Matched vesa as autoconfigured driver 6
[ 5.632] (==) Assigned the driver to the xf86ConfigLayout
[ 5.632] (II) LoadModule: "nouveau"
[ 5.632] (WW) Warning, couldn't open module nouveau
[ 5.632] (II) UnloadModule: "nouveau"
[ 5.632] (II) Unloading nouveau
[ 5.632] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 5.633] (II) LoadModule: "nv"
[ 5.633] (WW) Warning, couldn't open module nv
[ 5.633] (II) UnloadModule: "nv"
[ 5.633] (II) Unloading nv
[ 5.633] (EE) Failed to load module "nv" (module does not exist, 0)
[ 5.633] (II) LoadModule: "modesetting"
[ 5.633] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 5.634] (II) Module modesetting: vendor="X.Org Foundation"
[ 5.634] compiled for 1.17.1, module version = 1.17.1
[ 5.634] Module class: X.Org Video Driver
[ 5.634] ABI class: X.Org Video Driver, version 19.0
[ 5.634] (II) LoadModule: "fbdev"
[ 5.634] (WW) Warning, couldn't open module fbdev
[ 5.634] (II) UnloadModule: "fbdev"
[ 5.634] (II) Unloading fbdev
[ 5.634] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 5.634] (II) LoadModule: "vesa"
[ 5.634] (WW) Warning, couldn't open module vesa
[ 5.634] (II) UnloadModule: "vesa"
[ 5.634] (II) Unloading vesa
[ 5.634] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 5.634] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 5.634] (++) using VT number 7
[ 5.635] (II) modeset(0): using drv /dev/dri/card0
[ 5.635] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 5.636] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 5.636] (==) modeset(0): RGB weight 888
[ 5.636] (==) modeset(0): Default visual is TrueColor
[ 5.636] (II) Loading sub module "glamoregl"
[ 5.636] (II) LoadModule: "glamoregl"
[ 5.636] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 5.647] (II) Module glamoregl: vendor="X.Org Foundation"
[ 5.647] compiled for 1.17.1, module version = 1.0.0
[ 5.647] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.647] (II) glamor: OpenGL accelerated X.org driver based.
[ 5.772] (II) glamor: EGL version 1.4 (DRI2):
[ 5.786] (II) modeset(0): glamor initialized
[ 5.786] (II) Loading sub module "dri2"
[ 5.786] (II) LoadModule: "dri2"
[ 5.786] (II) Module "dri2" already built-in
[ 5.843] (II) modeset(0): Output DVI-0 has no monitor section
[ 5.896] (II) modeset(0): Output DVI-1 has no monitor section
[ 5.950] (II) modeset(0): Output TV-0 has no monitor section
[ 6.006] (II) modeset(0): EDID for output DVI-0
[ 6.006] (II) modeset(0): Manufacturer: SAM Model: 76f Serial#: 1110590261
[ 6.006] (II) modeset(0): Year: 2011 Week: 8
[ 6.006] (II) modeset(0): EDID Version: 1.3
[ 6.006] (II) modeset(0): Digital Display Input
[ 6.006] (II) modeset(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 6.006] (II) modeset(0): Gamma: 2.20
[ 6.006] (II) modeset(0): DPMS capabilities: Off
[ 6.006] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 6.006] (II) modeset(0): First detailed timing is preferred mode
[ 6.006] (II) modeset(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 6.006] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 6.006] (II) modeset(0): Supported established timings:
[ 6.006] (II) modeset(0): 720x400@70Hz
[ 6.006] (II) modeset(0): 640x480@60Hz
[ 6.006] (II) modeset(0): 640x480@67Hz
[ 6.006] (II) modeset(0): 640x480@72Hz
[ 6.006] (II) modeset(0): 640x480@75Hz
[ 6.006] (II) modeset(0): 800x600@56Hz
[ 6.006] (II) modeset(0): 800x600@60Hz
[ 6.006] (II) modeset(0): 800x600@72Hz
[ 6.006] (II) modeset(0): 800x600@75Hz
[ 6.006] (II) modeset(0): 832x624@75Hz
[ 6.006] (II) modeset(0): 1024x768@60Hz
[ 6.006] (II) modeset(0): 1024x768@70Hz
[ 6.006] (II) modeset(0): 1024x768@75Hz
[ 6.006] (II) modeset(0): 1280x1024@75Hz
[ 6.006] (II) modeset(0): 1152x864@75Hz
[ 6.006] (II) modeset(0): Manufacturer's mask: 0
[ 6.006] (II) modeset(0): Supported standard timings:
[ 6.006] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 6.006] (II) modeset(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 6.006] (II) modeset(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 6.006] (II) modeset(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 6.006] (II) modeset(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 6.006] (II) modeset(0): #5: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 6.007] (II) modeset(0): #6: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 6.007] (II) modeset(0): #7: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 148.5 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 6.007] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 6.007] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 6.007] (II) modeset(0): Ranges: V min: 50 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 175 MHz
[ 6.007] (II) modeset(0): Monitor name: SMBX2331
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 6.007] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 6.007] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 6.007] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 27.0 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 6.007] (II) modeset(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 6.007] (II) modeset(0): Supported detailed timing:
[ 6.007] (II) modeset(0): clock: 27.0 MHz Image Size: 509 x 286 mm
[ 6.007] (II) modeset(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 6.007] (II) modeset(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 6.007] (II) modeset(0): Number of EDID sections to follow: 1
[ 6.007] (II) modeset(0): EDID (in hex):
[ 6.007] (II) modeset(0): 00ffffffffffff004c2d6f0735433242
[ 6.007] (II) modeset(0): 0815010380331d782aee91a3544c9926
[ 6.007] (II) modeset(0): 0f5054bfef80714f8100814081809500
[ 6.007] (II) modeset(0): 950fa940b300023a801871382d40582c
[ 6.007] (II) modeset(0): 4500fd1e1100001e011d007251d01e20
[ 6.007] (II) modeset(0): 6e285500fd1e1100001e000000fd0032
[ 6.007] (II) modeset(0): 4b1f5111000a202020202020000000fc
[ 6.007] (II) modeset(0): 00534d4258323333310a2020202001ee
[ 6.007] (II) modeset(0): 02031cf14890041f0514131203230907
[ 6.007] (II) modeset(0): 078301000066030c00100080011d80d0
[ 6.007] (II) modeset(0): 721c1620102c2580fd1e1100009e011d
[ 6.007] (II) modeset(0): 8018711c1620582c2500fd1e1100009e
[ 6.007] (II) modeset(0): 011d00bc52d01e20b8285540fd1e1100
[ 6.007] (II) modeset(0): 001e8c0ad090204031200c405500fd1e
[ 6.007] (II) modeset(0): 110000188c0ad08a20e02d10103e9600
[ 6.007] (II) modeset(0): fd1e110000180000000000000000004c
[ 6.007] (II) modeset(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
[ 6.007] (II) modeset(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
[ 6.007] (II) modeset(0): Printing probed modes for output DVI-0
[ 6.007] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 6.007] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 6.007] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 6.007] (II) modeset(0): Modeline "1600x1200"x65.0 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (81.2 kHz d)
[ 6.007] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 6.007] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 6.007] (II) modeset(0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
[ 6.007] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 6.007] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 6.007] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 6.007] (II) modeset(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 6.007] (II) modeset(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 6.007] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6.007] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 6.007] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 6.007] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 6.007] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 6.007] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 6.007] (II) modeset(0): Modeline "1024x768"x75.0 170.24 1024 1108 1220 1416 768 768 770 801 doublescan -hsync +vsync (120.2 kHz d)
[ 6.007] (II) modeset(0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 6.007] (II) modeset(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 6.007] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz d)
[ 6.007] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 6.007] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6.008] (II) modeset(0): Modeline "960x720"x75.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 6.008] (II) modeset(0): Modeline "928x696"x75.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 6.008] (II) modeset(0): Modeline "896x672"x75.0 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
[ 6.008] (II) modeset(0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 6.008] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 6.008] (II) modeset(0): Modeline "800x600"x75.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
[ 6.008] (II) modeset(0): Modeline "800x600"x70.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[ 6.008] (II) modeset(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 6.008] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 6.008] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 6.008] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 6.008] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 6.008] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 6.008] (II) modeset(0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 6.008] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 6.008] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 6.008] (II) modeset(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
[ 6.008] (II) modeset(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 6.008] (II) modeset(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 6.008] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 6.008] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 6.008] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d)
[ 6.008] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 6.008] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 6.008] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 6.008] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 6.008] (II) modeset(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[ 6.008] (II) modeset(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 6.008] (II) modeset(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[ 6.008] (II) modeset(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[ 6.008] (II) modeset(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[ 6.008] (II) modeset(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 6.008] (II) modeset(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 6.008] (II) modeset(0): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[ 6.008] (II) modeset(0): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[ 6.008] (II) modeset(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 6.063] (II) modeset(0): EDID for output DVI-1
[ 6.116] (II) modeset(0): EDID for output TV-0
[ 6.116] (II) modeset(0): Output DVI-0 connected
[ 6.116] (II) modeset(0): Output DVI-1 disconnected
[ 6.116] (II) modeset(0): Output TV-0 disconnected
[ 6.116] (II) modeset(0): Using exact sizes for initial modes
[ 6.116] (II) modeset(0): Output DVI-0 using initial mode 1920x1080
[ 6.116] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 6.116] (==) modeset(0): DPI set to (96, 96)
[ 6.116] (II) Loading sub module "fb"
[ 6.116] (II) LoadModule: "fb"
[ 6.117] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 6.118] (II) Module fb: vendor="X.Org Foundation"
[ 6.118] compiled for 1.17.1, module version = 1.0.0
[ 6.118] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.118] (==) Depth 24 pixmap format is 32 bpp
[ 6.462] (==) modeset(0): Backing store disabled
[ 6.462] (==) modeset(0): Silken mouse enabled
[ 6.464] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 6.535] (==) modeset(0): DPMS enabled
[ 6.535] (WW) modeset(0): Option "EXANoComposite" is not used
[ 6.535] (II) modeset(0): [DRI2] Setup complete
[ 6.535] (II) modeset(0): [DRI2] DRI driver: nouveau
[ 6.535] (II) modeset(0): [DRI2] VDPAU driver: nouveau
[ 6.535] (--) RandR disabled
[ 6.551] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 6.551] (II) AIGLX: enabled GLX_ARB_create_context
[ 6.551] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 6.551] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 6.551] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 6.551] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 6.551] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 6.551] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 6.551] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 6.552] (II) AIGLX: Loaded and initialized nouveau
[ 6.552] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 6.559] (II) modeset(0): Setting screen physical size to 507 x 285
[ 6.741] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 6.741] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.741] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 6.741] (II) LoadModule: "evdev"
[ 6.741] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6.744] (II) Module evdev: vendor="X.Org Foundation"
[ 6.744] compiled for 1.16.2, module version = 2.9.1
[ 6.744] Module class: X.Org XInput Driver
[ 6.744] ABI class: X.Org XInput driver, version 21.0
[ 6.744] (II) Using input driver 'evdev' for 'Power Button'
[ 6.744] (**) Power Button: always reports core events
[ 6.744] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 6.744] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.744] (--) evdev: Power Button: Found keys
[ 6.744] (II) evdev: Power Button: Configuring as keyboard
[ 6.744] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 6.744] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 6.744] (**) Option "xkb_rules" "evdev"
[ 6.744] (**) Option "xkb_model" "pc104"
[ 6.744] (**) Option "xkb_layout" "us"
[ 6.744] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 6.780] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 6.780] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.780] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 6.780] (II) Using input driver 'evdev' for 'Power Button'
[ 6.780] (**) Power Button: always reports core events
[ 6.780] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 6.780] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.780] (--) evdev: Power Button: Found keys
[ 6.780] (II) evdev: Power Button: Configuring as keyboard
[ 6.780] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 6.780] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 6.780] (**) Option "xkb_rules" "evdev"
[ 6.780] (**) Option "xkb_model" "pc104"
[ 6.780] (**) Option "xkb_layout" "us"
[ 6.780] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 6.781] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
[ 6.781] (II) No input driver specified, ignoring this device.
[ 6.781] (II) This device may have been added with another device file.
[ 6.782] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event10)
[ 6.782] (II) No input driver specified, ignoring this device.
[ 6.782] (II) This device may have been added with another device file.
[ 6.782] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event5)
[ 6.782] (II) No input driver specified, ignoring this device.
[ 6.782] (II) This device may have been added with another device file.
[ 6.782] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event6)
[ 6.782] (II) No input driver specified, ignoring this device.
[ 6.782] (II) This device may have been added with another device file.
[ 6.783] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event7)
[ 6.783] (II) No input driver specified, ignoring this device.
[ 6.783] (II) This device may have been added with another device file.
[ 6.783] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event8)
[ 6.783] (II) No input driver specified, ignoring this device.
[ 6.783] (II) This device may have been added with another device file.
[ 6.783] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event9)
[ 6.783] (II) No input driver specified, ignoring this device.
[ 6.783] (II) This device may have been added with another device file.
[ 6.784] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
[ 6.784] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 6.784] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 6.784] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
[ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc050
[ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 6.784] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/0003:046D:C050.0001/input/input1/event1"
[ 6.784] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
[ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 6.785] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 6.785] (II) No input driver specified, ignoring this device.
[ 6.785] (II) This device may have been added with another device file.
[ 6.785] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 6.785] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 6.785] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 6.785] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 6.785] (**) AT Translated Set 2 keyboard: always reports core events
[ 6.785] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 6.785] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 6.785] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 6.785] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 6.785] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 6.785] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 6.785] (**) Option "xkb_rules" "evdev"
[ 6.785] (**) Option "xkb_model" "pc104"
[ 6.785] (**) Option "xkb_layout" "us"
[ 6.785] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 6.803] (EE)
[ 6.803] (EE) Backtrace:
[ 6.803] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x132) [0x81df9e2]
[ 6.804] (EE) 1: ? (?+0x132) [0xb7787cc5]
[ 6.804] (EE) 2: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x4cd7) [0xb6e2a1c7]
[ 6.806] (EE) 3: /usr/lib/xorg-server/Xorg (xf86_show_cursors+0x688) [0x80f9008]
[ 6.806] (EE) 4: /usr/lib/xorg-server/Xorg (xf86DestroyCursorInfoRec+0xcf8) [0x8103fc8]
[ 6.806] (EE) 5: /usr/lib/xorg-server/Xorg (RamDacHandleColormaps+0x67b) [0x810218b]
[ 6.807] (EE) 6: /usr/lib/xorg-server/Xorg (miPointerUpdateSprite+0x25d) [0x81c648d]
[ 6.808] (EE) 7: /usr/lib/xorg-server/Xorg (miPointerUpdateSprite+0x4c1) [0x81c6b31]
[ 6.808] (EE) 8: /usr/lib/xorg-server/Xorg (CompositeRegisterImplicitRedirectionException+0x4199) [0x8114399]
[ 6.809] (EE) 9: /usr/lib/xorg-server/Xorg (PanoramiXRenderReset+0x72a) [0x815915a]
[ 6.810] (EE) 10: /usr/lib/xorg-server/Xorg (ConfineToShape+0x9f1) [0x80843b1]
[ 6.810] (EE) 11: /usr/lib/xorg-server/Xorg (WindowHasNewCursor+0x3b) [0x8084f2b]
[ 6.810] (EE) 12: /usr/lib/xorg-server/Xorg (ChangeWindowAttributes+0xb7c) [0x80aa9ec]
[ 6.811] (EE) 13: /usr/lib/xorg-server/Xorg (ProcBadRequest+0x209) [0x8074a49]
[ 6.811] (EE) 14: /usr/lib/xorg-server/Xorg (SendErrorToClient+0x3a6) [0x807abf6]
[ 6.811] (EE) 15: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x42f) [0x807edaf]
[ 6.811] (EE) 16: /usr/lib/xorg-server/Xorg (miPolyFillRect+0x27f) [0x8068ddf]
[ 6.814] (EE) 17: /usr/lib/libc.so.6 (__libc_start_main+0xde) [0xb72d864e]
[ 6.814] (EE) 18: /usr/lib/xorg-server/Xorg (_start+0x21) [0x8068bd9]
[ 6.814] (EE)
[ 6.814] (EE) Segmentation fault at address 0x0
[ 6.814] (EE)
Fatal server error:
[ 6.814] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 6.814] (EE)
[ 6.814] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 6.814] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 6.814] (EE)
[ 6.815] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 6.817] (EE) Server terminated with error (1). Closing log file.
Note the segfault in modesetting_drv.so!
Any help?
I tried to reinstall dependencies of xorg-server and mesa. And then I even went through with the whole system update which I postponed for a few weeks because of the KDE changes. Sadly even the whole system update didn't help.
Is it possible that any old config files can cause this?
EDIT:
I tried kernel parameter "nouveau.modeset=0" but it didn't help.
Last edited by cro (2015-02-26 16:33:19)

Ok, I guess I solved it by reinstalling xf86-video-nouveau.
Funny business! Why did the upgrade to xorg-server 1.17.1 force me to remove it when it is still needed??
And why does that lead to mysterious error messages and segfault??
I discovered it accidentally when I stumbled upon the fact that the package was still installed on my newer x86-64 Arch installation despite being on xorg-server 1.17.1.

MySQL doesn't start after upgrade to 10.6.8

After installing the 10.6.8 upgrade on my Mac Mini Server (first using Software Update, then again after manually downloading and running the update), MySQL doesn't start. Well, it seems it starts alright, but then immediately quits. From the mysql log:
110626 21:18:46 mysqld started
110626 21:18:46 [ERROR] Error message file '/usr/share/mysql/english/errmsg.sys' had only 480 error messages,
but it should contain at least 481 error messages.
Check that the above file is the right version for this program!
110626 21:18:46 [ERROR] Aborting
Since I need MySQL to run my Apache server, Apache doesn't start either. Which means all of my sites on that box are now down.
Suggestions for fixing on the MySQL site suggest reinstalling MySQL 5.0.92. But I'm hesitant to do so.
Other suggestions are reinstalling 10.6.X from scratch, upgrading until 10.6.7 and then restore from Time Machine from the last backup before the upgrade. Not looking forward to that either.
Does anybody have some other suggestions?
Elizabeth Mattijsen

The usual trigger is a skewed version between the files here, though that would be unexpected. (Similar errors have cropped up on rare occasions with previous Mac OS X Server releases; something went off the rails here.)
First, make a backup of the file or (better) boot the DVD and make a backup of the whole disk. That's your path back if something goes wrong here.
Try re-downloading and re-loading the 10.6.8 combo update (the combo update, and not the delta update), as a potential brute-force fix.
Failing that, I'd then look to fetch a copy of the same-version kit from the MySQL server (as what is running on 10.6.8 server), and extract this specific file from the MySQL kit, and try replacing (just) that file.

WorkFlow doesn't start after upgrade

Hi.
After our upgrade from 4.6c to 6.0 ERP, a WorkFlow linked to BKPF doesn't start. When the user use the FB60 Transaction to post a new FI document the WorkFlow need to start.
Any special activity after upgrade we need to do in our WorkFlow?
Thanks.
Wladimir

Hi
If you are using a custom workflow and using the FM "SWW_WI_START" then make sure that destination is commented out .
Incorrect
CALL FUNCTION 'SWW_WI_START' DESTINATION wf_dest
correct
CALL FUNCTION 'SWW_WI_START'
This should solve the problem.
Thanks,
Krishna.

MDM Server doesn't start after upgrade to SP 5

hi,
i'm not used to sap services on windows hosts.
After the Update from 7.1.04 to 7.1.05 the mdm server doesn't start. I found only a few logs (unter c:/usr/sap/SID/MDS00/work). Most of them from sapcpe (without errors or warnings). Only the sapstart.log contains a bit information:
SAP-R/3-Startup Program
Starting at 2010/08/16 21:29:18
Startup Profile: "C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest"
Starting Programs
(1684) Execute: C:\usr\sap\MDM\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest list:C:\usr\sap\MDM\SYS\exe\uc\NTAMD64/mds.lst
(976) Execute: C:\usr\sap\MDM\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest list:C:\usr\sap\MDM\SYS\exe\uc\NTAMD64/shared.lst
(3632) Execute: C:\usr\sap\MDM\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest list:C:\usr\sap\MDM\SYS\exe\uc\NTAMD64/sapinstance.lst
(2172) Execute: C:\usr\sap\MDM\MDS00\exe\mdmcpc.bat C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest.INI C:\usr\sap\MDM\MDS00\config\mds.ini
(3652) CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 3652 died unexpectedly, restarting process
(3612) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 3612 died unexpectedly, restarting process
(2364) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 2364 died unexpectedly, restarting process
(3576) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 3576 died unexpectedly, restarting process
(3588) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 3588 died unexpectedly, final process restart.
Process will not be restated in the future because of frequent failure.
(1396) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
This isn't really much I can work with. In the sapmmc I found the Option Developer Trace. I try to 'switch it on', but there is no difference.
With 7.1.04 the server was running well.
I happy for any suggestions

Hi,
Please check out Note 1482822 - MDM Server not starting after MDM 7.1 SP05 was installed.
hope it helps you.
Best regards,
sudhanshu

Mail doesn't start after upgrading to Yosemite

Hi,
I upgraded to Yosemite and Mail wasn't working for a couple of days... I couldn't send any email... and now when I try to open Mail
It seems to start, the Mail menu bar appears on top of the screen but it never opens any window.
I upgraded in 2 mac mini I have and everything worked fine, this problem I have is on my macbook air.

Back up all data before proceeding.
Step 1
If Mail crashes or freezes immediately on launch, try the steps suggested on this page. Sometimes a corrupt message on a mail server can be deleted by logging in to the server through its web page. If Mail still crashes on launch, skip to Step 3.
Step 2
Select all your mailboxes, and then select
          Mailbox ▹ Export Mailbox...
from the Mail menu bar. Export the mailboxes to the Desktop folder.
Make a note of the settings for all your Mail accounts – everything you'd need to reconstruct the settings from scratch.
Quit Mail.
Step 3
In the Finder, hold down the option key and select
          Go ▹ Library
from the menu bar. Move the following items (some may not exist) from the folder that opens to the Desktop:
          Application Support/AddressBook/MailRecents-v4.abcdmr
          Containers/com.apple.corerecents.recentsd
          Containers/com.apple.mail
          Containers/com.apple.MailServiceAgent
          Mail
Note: you are not moving the Mail application. You’re moving a folder named “Mail.”
Launch Mail. It will behave as if you were setting it up for the first time. Go through the setup process with one of your accounts, using the information you noted earlier. Test. If Mail works now, recreate the rest of your settings.
If there’s no improvement, quit Mail and put back the items you moved to the Desktop, replacing any newer ones that may have been created in their place. Stop here and post your results.
Step 4
This step should not be necessary with IMAP or Exchange mailboxes, because they synchronize automatically with the server. Nevertheless, if the mailboxes are very large, importing them may spare you the need for a long download.
If you took Step 2, import the mailboxes you exported:
          File ▹ Import Mailbox...
If you skipped Step 2, look inside the Mail folder on the Desktop for a subfolder Mail/V2/Mailboxes. Import the mailboxes it contains.
Test. If Mail is still working, delete the items you moved to the Desktop in Step 3.

Reports server doesn't start after upgrade 11.1.1.2 - 11.1.1.6

Hello,
I've upgraded a Linux server from Weblogic 10.3.2 / Forms 11.1.1.2 to Weblogic 10.3.6 / Forms 11.1.1.6 and I have some problems with reports server.
I can't use jobStatusRepository on my reports server.
I've created a new one, and when I activate the Job Status Repository, server can't start.
I've added this features from Enterprise Manager and I've build a new credential (I first have tried to redefine old ones).
When I modify my rwserver.conf adding comments to jobStatusRepository section, my report server start (from opmnctl or from Enterprise Manager) but as soon I put on line the jobStatusRepository, it fails to start.
My server is an Oracle Linux 5.
I've done the same on another server (same releases) and it does the same ...
Thanks for any help.
Xavier Cabantous

Hello,
thanks for your reply.
I've put level TRACE:32in traces but there is nothing interesting in log files :
in console~rep11_nodhos~1.log =>
12/06/09 21:02:10 Start process
9 juin 2012 21:02:13 oracle.security.jps.internal.common.util.XmlSchemaValidationUtil$StrictErrorHandler warning
ATTENTION: Echec de la validation du contenu XML. SchemaLocation: schemaLocation value = 'http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd' must have even number of URI's. Emplacement : line 2 column 272.
but I've seen in other topics that we don't have to care to this Warning.
in rwserver_diagnostic.log =>
no errors messages, it ends with
[2012-06-09T21:02:13.483+02:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 10] [ecid: 0000JVIc0PeFw000jzwkno1Fotqn000001,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] Multicast:registerReceiver Packet handler registered
[2012-06-09T21:02:13.489+02:00] [reports] [NOTIFICATION:16] [] [oracle.reports.server] [tid: 10] [ecid: 0000JVIc0PeFw000jzwkno1Fotqn000001,0] ServerPacketHandler:start ServerPacketHandler started successfully
I just have opened a SR on MetaLink

Activity Monitor doesn't start after upgrade to 10.4.6

Had quite a few challenges with the upgrade to 10.4.6
All Applications were moved to the Desktop and with the help of the Apple hotline I moved them all back in the correct location.
Challenge now is that the Activity Monitor does not start up anymore
When I check the Console itcomes back with
2006-05-06 17:36:28.950 Activity Monitor[206] The tool is not setuid root - please repair the privileges
Anyone who can help here or do I need to open another ticket with Apple?
J

Welcome to Apple's Users Help Users Forums.
Hi help...,
Glad the problem is fixed. You got some great help from Thomas. You have rewards to hand out.
Gold Star = Helpful = 5 pts w 2 available and Green Star = Solved = 10 pts.

The browser doesn't start after turning off and turning on the computer

The browser doesn't start after turning off and turning on the computer. I tried to delete the program entirely (along with personal preferences), create a new account, install a different browser versions. All this did not help. (I have Windows 7.) Help, please! Every day I have to reinstall Firefox!

Hello Nastena, try a clean re-install, certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you '''remove Firefox program files''' and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
* check also if your antivirus or other security software(firewall, antispyware etc) blocks firefox access.
thank you

Mail server doesn't work after upgrading from SL to ML

My Mail server doesn't work after upgrading from SL to ML
Mail client connects with the Mail Server wich seems to run but then they can't receive any email...
the problem seems to be related with dovecot ... in my smtp log i get this:
relay=dovecot, delay=324, delays=324/0.02/0/0.01, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/libexec/dovecot/deliver: Permission denied
I have to say that in the usr/libexec there wasn't the dovecot directory so I just tried to create one but with no luck
Any Ideas?
Cheers
Carlo
This is my postconf -n info:
server:Data admin$ postconf -n
biff = no
command_directory = /usr/sbin
config_directory = /Library/Server/Mail/Config/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
data_directory = /Library/Server/Mail/Data/mta
debug_peer_level = 2
debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
dovecot_destination_recipient_limit = 1
enable_server_options = yes
header_checks = pcre:/etc/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
inet_interfaces = all
inet_protocols = ipv4
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 20971520
mydestination = $myhostname, localhost.$mydomain, localhost
mydomain = moremoremore.it
mydomain_fallback = localhost
myhostname = server.moremoremore.it
mynetworks = 127.0.0.0/8,192.168.178.0/24
newaliases_path = /usr/bin/newaliases
queue_directory = /Library/Server/Mail/Data/spool
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost = mail.mclink.it
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtp_sasl_auth_enable = no
smtp_sasl_password_maps =
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5,gssapi
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.chain.pem
smtpd_tls_cert_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.cert.pem
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.key.pem
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
virtual_alias_maps =
server:Data admin$

if this could help:
mail:setStateVersion = 1
mail:readWriteSettingsVersion = 1
mail:connectionCount = 11
mail:servicePortsRestrictionInfo = _empty_array
mail:protocolsArray:_array_index:0:status = "ON"
mail:protocolsArray:_array_index:0:kind = "INCOMING"
mail:protocolsArray:_array_index:0:protocol = "IMAP"
mail:protocolsArray:_array_index:0:state = "RUNNING"
mail:protocolsArray:_array_index:0:error = ""
mail:protocolsArray:_array_index:1:status = "ON"
mail:protocolsArray:_array_index:1:kind = "INCOMING"
mail:protocolsArray:_array_index:1:protocol = "POP3"
mail:protocolsArray:_array_index:1:state = "RUNNING"
mail:protocolsArray:_array_index:1:error = ""
mail:protocolsArray:_array_index:2:status = "ON"
mail:protocolsArray:_array_index:2:kind = "INCOMING"
mail:protocolsArray:_array_index:2:protocol = "SMTP"
mail:protocolsArray:_array_index:2:state = "RUNNING"
mail:protocolsArray:_array_index:2:error = ""
mail:protocolsArray:_array_index:3:status = "ON"
mail:protocolsArray:_array_index:3:kind = "OUTGOING"
mail:protocolsArray:_array_index:3:protocol = "SMTP"
mail:protocolsArray:_array_index:3:state = "RUNNING"
mail:protocolsArray:_array_index:3:error = ""
mail:protocolsArray:_array_index:4:status = "OFF"
mail:protocolsArray:_array_index:4:kind = "INCOMING"
mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
mail:protocolsArray:_array_index:4:state = "STOPPED"
mail:protocolsArray:_array_index:4:error = ""
mail:protocolsArray:_array_index:5:status = "OFF"
mail:protocolsArray:_array_index:5:kind = "INCOMING"
mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
mail:protocolsArray:_array_index:5:state = "STOPPED"
mail:protocolsArray:_array_index:5:error = ""
mail:startedTime = "2013-01-21 21:18:32 +0000"
mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:SMTP Log = "/var/log/mail.log"
mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
mail:imapStartedTime = "2013-01-21 21:18:34 +0000"
mail:servicePortsAreRestricted = "NO"
mail:state = "RUNNING"
mail:postfixStartedTime = "2013-01-21 21:18:32 +0000"

DBConsole Service doesn't start after Install OAS F&R-Services Win 10g

Windows DBConsole Service doesn't start after Install OAS F&R-Services
Hello,
we have installed:
WINDOWS Server 2003 with SP 2
Oracle 10.2.0.1
OAS F&R Services 10.1.2.0.2
after Install DBR2 EM / DBConsole did work
after Install OAS F&R-Service
the windows-service for DBConsole
doesn't start, return with an Error Code 2
see below
the file named emdbconsole.nohup from output log
is not to find
the ias_console does work fine
OAS F_R-Services do work too
whats may be wrong ?
regards
Norbert
OracleDBConsoleorclsrvc.log :
EMDROOT=D:\oracle\product\10.2.0\db_1
ORACLE_HOME=D:\oracle\product\10.2.0\db_1
EMDSTATE=D:\oracle\product\10.2.0\db_1\kfin_orcl
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
12/14/09 13:13:08 Start pending...
12/14/09 13:13:08 Verifying dbconsole is not started already. Command line "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
12/14/09 13:13:09 dbconsole launch commandline is "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
12/14/09 13:13:09 Tracking process launch...
12/14/09 13:13:39 dbconsole exited with retCode 2.
12/14/09 13:13:39 Check D:\oracle\product\10.2.0\db_1\kfin_orcl\sysman\log\emdbconsole.nohup for details
Edited by: astramare on Dec 15, 2009 8:43 AM

Hi,
1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
cd %ORACLE_HOME%\bin
emctl stop dbconsole
2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
Change line from:
tracelevel.main=WARN
To
tracelevel.main=DEBUG
Decomment this line, so that the line becomes :
EMAGENT_PERL_TRACE_LEVEL=DEBUG
3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
Change line from:
log4j.rootCategory=WARN, emlogAppender, emtrcAppender
To
log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
5. Start the dbconsole and upload the output of each command
- start the dbconsole: "emctl start dbconsole"
- issue "emctl clearstate"
- status the dbconsole: "emctl status dbconsole"
- check the status of the agent until it comes up: "emctl status agent"
- force an upload: emctl upload
6. Check If you are able to view the dbconsole Page & login
check below logs may be you can see the close error messages to solve the issue.
<ORACLE_HOME>/<hostname_sid>/sysman/log directory
<ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
Thanks.

FF doesn't start after update to version 27.0.1

FF doesn't start after update to version 27.0.1
Crash ID: bp-2bc18734-d643-4843-a10f-fd6102140214

Firefox 27.0.1 is too new for me to know what unique issues it might have. I will message you a link to download the installer for Firefox 27.0 to see whether that reverses the problem.

Mountain Lion Setup doesn't start after reboot

I have a curious problem:
I wanted to upgrade my MBP to ML, but it doesn't work. I start the installation script, accept the licence agreement and choose the SSD as the installation target. The installation script prepares the installation (Install OS X data folder is created in the root directory) and want to restart the MBP to execute the installation.
But the restart doesn't start the upgrade, it starts the login screen and after that I'm back on my old 10.7.4-based desktop without any installation. What's getting wrong here? How can I force starting the prepared installation after reboot?
My SSD is encrypted with FileVault 2, maybe this is a relevant information.
How can I upgrade my MBP? Please help!

Unfortunately this is not the reason.
It doesnt't make any difference if FIleVault is activated or not. I decrypted the complete disk, but the problem still remains.
Any ideas? I can't believe that ML ist not installable on a six-month-old MBP :-(

GKrellM doesn't start afrter upgrade to 2.3.4-1

GKrellM doesn't start afrter upgrade to 2.3.4-1. When I try launch it via konsole, it says: available0. illegal instruction (SIGILL). Previous version worked just fine.

kotyz wrote:GKrellM doesn't start afrter upgrade to 2.3.4-1. When I try launch it via konsole, it says: available0. illegal instruction (SIGILL). Previous version worked just fine.
same problem here

Teamviewer doesn't start after resume from hibernation

Teamviewer doesn't start after resume from hibernation, what can I do to make it work?
I issued command "teamviewer --daemon start" but no success.

Quote from: BOSSKILLER on 07-July-08, 00:03:29
That's probably BIOS bug, have a ask MSI here: http://ocss.msi.com.tw/ They can send you a new BIOS to try.
I supposed that this issue is caused by BIOS bug, and this speculation was confirmed. MSI Support has sent to me link with BIOS version 132, which solves the problem
Under this link you can find this BIOS: http://rapidshare.com/files/127845890/a7395ims.132.zip.html
Regards.

Mac OS X 10.4.8 doesn't start after upgrade to 10.4.10

Similar Messages

Maybe you are looking for