Mac OS X 10.4: Error -36 alert displays when connecting to a Windows server
Mac OS X 10.4: Error -36 alert displays when connecting to a Windows server
http://docs.info.apple.com/article.html?artnum=301580
A user meet the above problem connecting to Windows 2003 server but have no this error if connected to Windows 2000 Server.
According to the above solution, will you configure Windows 2003 server or just configure user's Macintosh platform?
EL2006 wrote:
Actually, win2003 server's default security options are shown as follows.
1. MS network client: Digitally sign communications (always) - Disabled
2. MS network client: Digitally sign communications (if server agrees) - Enabled
3. MS network server: Digitally sign communications (always) - Disabled
4. MS network server: Digitally sign communications (if client agrees) - Disabled
We could both be right on this one; it depends on your setup. By default, if you're running a domain then the Domain Controller is:
*Microsoft network client: Digitally sign communications (always) Policy Setting: not defined*
That defaults to the Group Policy setting, which is enabled.
The local computer group policy for Windows Server 2003 is:
*Microsoft network client: Digitally sign communications (always) Security Setting: disabled*
I'm referencing this KB article on Microsoft's website: <http://support.microsoft.com/kb/887429>.
This does not take into consideration that you may have upgraded from Windows 2000 Server to Windows Server 2003.
Regardless, you seem to have already eliminated this as a possibility as you mention below.
In my case, user can connect to win2003 server without problem in the same LAN 192.168.8.x. If connect it from remote lan 192.168.10.x (e.g. smb://192.168.8.250/artwork) error -36 will appear. Since remote lan is connected to local lan by secured VPN, all traffic or any ports are allowed to passe through VPN.
Rather than a server or client problem I would speculate your VPN connection is the problem. Do you have port TCP 445 open or blocked at your VPN concentrator? I believe this needs to be open.
Hope this helps!
bill
Similar Messages
-
Error -36 alert displays when connecting to a Windows server
Hi All
I am getting error -36 when I tried to copy any file or folder from windows server
"Error -36 alert displays when connecting to a Windows server"
Even the file info is zero KB, while from other MAC machine it is right size.You shouldn't get the same error when you are doing it from Terminal. The error should be a little different. I just did a test. Is this a Microsoft 2003 server, 2000 or NT4 you are connecting to? Your post isn't specific. Make sure the System Preferences:Network:Advanced:WINS tab is filled in with the domain you are connecting to next to the "Workgroup" name. The WINS server should already be filled in. Open the connect window with command K. Type domainname\username for the login and then the password. If you don't want to enter the domain each time you will need to add the domain in the Applications:Utilities:Directory Uitility application.
If you are trying to connect to a Windows XP client box, the machine will automatically try to authenticate with the guest account not the username and password you are using even when "registered user" is ticked. You have to edit the registry to change this default. If the username from the Windows PC is the same as the user logon then this is why the PC is able to connect and the mac is not. -
Hello All,
I have verified entire otn community, but none of the solution working for me and hence posting this problem. I'm getting below error message when I try to connect from oracle 11g to sqlserver database. All details are given below and request some body to provide resolution.
Oracle 11 g server installed in "Red Hat Enterprise Linux Server release 6.3"
Sqlserver running in Windows server enterprise 64bit OS.
$ cat initdg4msql.ora
# This is a customized agent init file that contains the HS parameters
# that are needed for the Database Gateway for Microsoft SQL Server
# HS init parameters
HS_FDS_CONNECT_INFO=[SJCGNMWQA2WEB01]:SQLEXPRESS//msdb
# alternate connect format is hostname/serverinstance/databasename
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
$ cat listener.ora
# listener.ora Network Configuration File: /home/oracle/11g/product/11/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = dg4msql)
(ORACLE_HOME = /home/oracle/11g/product/11)
(PROGRAM = dg4msql)
$ cat tnsnames.ora
# tnsnames.ora Network Configuration File: /home/oracle/11g/product/11/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
GNMDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = sjcgnm62v2db1.skta.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = GNMDB)
dg4msql =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = sjcgnm62v2db1.skta.com)(PORT = 1521))
(CONNECT_DATA = (SID = msdb))
(HS = OK)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = sjcgnm62v2db1.skta.com)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
ADR_BASE_LISTENER = /home/oracle/11g
Output of lsnrctl start
$ lsnrctl start
LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 22-NOV-2013 15:17:08
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Starting /home/oracle/11g/product/11/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.3.0 - Production
System parameter file is /home/oracle/11g/product/11/network/admin/listener.ora
Log messages written to /home/oracle/11g/diag/tnslsnr/sjcgnm62v2db1/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sjcgnm62v2db1.skta.com)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=sjcgnm62v2db1.skta.com)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.3.0 - Production
Start Date 22-NOV-2013 15:17:08
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /home/oracle/11g/product/11/network/admin/listener.ora
Listener Log File /home/oracle/11g/diag/tnslsnr/sjcgnm62v2db1/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sjcgnm62v2db1.skta.com)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
Services Summary...
Service "dg4msql" has 1 instance(s).
Instance "dg4msql", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
SQL> CREATE PUBLIC DATABASE LINK sqlserver CONNECT TO "sa" IDENTIFIED BY "gnm123" USING 'dg4msql';
Database link created.
SQL> select * from dual@sqlserver;
select * from dual@sqlserver
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from SQLSERVER
SQL> select * from "sys"."tables"@sqlserver;
select * from "sys"."tables"@sqlserver
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from SQLSERVER
Pl help.Hi Klaus,
I just pick the gateway 11.2.0.3 patch to the installation. Here I got error and patch installation failed.
[oracle@sjcgnm62v2db1 13092292]$ opatch apply
Invoking OPatch 11.2.0.1.7
Oracle Interim Patch Installer version 11.2.0.1.7
Copyright (c) 2011, Oracle Corporation. All rights reserved.
Oracle Home : /home/oracle/11g/product/11
Central Inventory : /home/oracle/oraInventory
from : /etc/oraInst.loc
OPatch version : 11.2.0.1.7
OUI version : 11.2.0.3.0
Log file location : /home/oracle/11g/product/11/cfgtoollogs/opatch/opatch2013-11-26_12-41-27PM.log
Applying interim patch '13092292' to OH '/home/oracle/11g/product/11'
Verifying environment and performing prerequisite checks...
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 13092292: Required component(s) missing : [ oracle.rdbms.tg4db2, 11.2.0.3.0 ]
[ Error during Prerequisite for apply Phase]. Detail: ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
Log file location: /home/oracle/11g/product/11/cfgtoollogs/opatch/opatch2013-11-26_12-41-27PM.log
Recommended actions: This patch requires some components to be installed in the home. Either the Oracle Home doesn't have the components or this patch is not suitable for this Oracle Home.
OPatch failed with error code 39
[oracle@sjcgnm62v2db1 13092292]$
Pl help. -
ORA-28545: error diagnosed by Net8 when connecting to an agent error
Hi,
I've to setup the Oracle Gateway service in order to access the SQL Server 2005 db from Oracle11g 11.1.0.7.0 db which is running on a LINUX os.
Basically, i've to periodically PULL data from SQL Server to oracle.
Have done the necessary setup as specified in Oracle docs.
1. Oracle ini file: initdg4msql.ora
HS_FDS_CONNECT_INFO=999.168.0.1:1433//SqlServerDb
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_RECOVERY_ACCOUNT=sqlserver_user_id
HS_FDS_RECOVERY_PWD=sqlserver_user_password
2. listener.ora entry
LISTENER_GATEWAY =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oracle.portal.internal)(PORT = 1522))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = OBIM1)
(ORACLE_HOME = /app/oracle/product/11.1.0/db_1)
(SID_DESC =
(SID_NAME = dg4msql)
(ORACLE_HOME = /app/oracle/product/11.1.0/db_1)
(ENVS=LD_LIBRARY_PATH=/app/oracle/product/11.1.0/db_1/dg4msql/driver/lib;/app/oracle/product/11.1.0/db_1/lib)
(PROGRAM = dg4msql)
3. tnsnames.ora entry
dg4msql =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = tcp)(HOST = oracle.portal.internal)(PORT = 1522))
(CONNECT_DATA =(SID = dg4msql))
(HS = OK)
4. Create database link on oracle
create public database link sqlserver connect to "sqlserver_user_id" identified by "sqlserver_user_password" using 'dg4msql';
Database link created.
Upon the completion of the configuration, I did the following and all are successful and working:
- starting the listener by
lsnrctl start LISTENER_GATEWAY
- tnsping my gateway
tnsping dg4msql
However, when I tried to retreive data and got the following error:
SQL> desc myTestingTable@sqlserver;
ERROR:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from SQLSERVER
I have stepped through the doc of "How to Setup DG4MSQL (Oracle Database Gateway for MS SQL Server) Release 11" but unable to figure out where the error lies.
Any inputs on this?? please help, I am in urgent.Hi Mike,
As suggested, I have tried both formats with the spaces at the front. When I tried to start the listener, still get the error as show below:
Starting /app/oracle/product/11.1.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.1.0.7.0 - Production
System parameter file is /app/oracle/product/11.1.0/db_1/network/admin/listener.ora
Log messages written to /app/oracle/diag/tnslsnr/p1db01/listener_gateway/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle.portal.internal)(PORT=1522)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1522)))
TNS-01155: Incorrectly specified SID_LIST_LISTENER_GATEWAY parameter in LISTENER.ORA
NL-00305: the specified path name does not exist
As answers to your points -
- you have the HOST defined as -
(HOST = oracle.portal.internal)
is this the actual host name or did you change it to hide it in the post ?
*** It is just a mark up host for security reason
- what happens if you use the IP address instead of the hostname ?
*** Have tried the IP address but same error
- is the gateway installed in the directory /app/oracle/product/11.1.0/db_1 ?
*** Yes
- can you set up listener level 16 tracing and check the trace file for further information about the errors ? Add this to the listener.ora file -
trace_level_listener=16
and start the listener.
*** Have added the trace level 16 and tried to start the listener but same error. Please refer the snapshot from the log.xml. Please note that the host_id "oracle" is just a make-up.
<txt>Listener completed notification to CRS on start
</txt>
</msg>
<msg time='2010-04-17T15:37:56.544+10:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oracle'
host_addr='99.999.99.99'>
<txt>
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
</txt>
</msg>
<msg time='2010-04-17T15:37:56.545+10:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oracle'
host_addr='10.254.84.32'>
<txt>TNS-01155: Incorrectly specified SID_LIST_LISTENER_GATEWAY parameter in LISTENER.ORA
NL-00305: the specified path name does not exist
</txt>
</msg>
- I have repeated the same steps above by changing the SID_LIST_LISTENER_GATEWAY back to SID_LIST_LISTENER parameter in LISTENER.ORA
The listener can be started but back to square one with ORA-28545 error as show below:
SQL> desc myTestingTable@sqlserver;
ERROR:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from SQLSERVER
Thanks -
Error : ORA-28545: error diagnosed by Net8 when connecting to an agent
I try to connect my Oracle 11.2 database to SQL server 2012. I installed Oracle Gateway on a window 2012 R2 and followed Oracle Gateway configure instruction.
Here is the initdg4msql.ora
# HS init parameters
HS_FDS_CONNECT_INFO=ctmcsql2012.dot.state.co.us:1433/CTMCSQLSVR12/external
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_TRANSACTION_MODEL=READ_ONLY
HS_DB_NAME=external
HS_DB_DOMAIN=ITS.DOT.STATE.CO.US
LISTENER.ORA
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME=PLSExtProc)
(ORACLE_HOME=D:\product\11.2.0\tg_1)
(PROGRAM=extproc)
(SID_DESC =
(SID_NAME=dg4msql)
(ORACLE_HOME=D:\product\11.2.0\tg_1)
(PROGRAM=dg4msql)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = CTMCSQL2012.dot.state.co.us)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
ADR_BASE_LISTENER = D:\product\11.2.0\tg_1
TNSNAMES.ORA
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
dg4msql.its.dot.state.co.us =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ctmcsql2012.dot.state.co.us)(PORT=1521))
(CONNECT_DATA=
(SID=dg4msql))
(HS=OK)
lsnrctl status output:
PS D:\product\11.2.0\tg_1\bin> lsnrctl status LISTENER
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 23-APR-2015 14:26:54
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=CTMCSQL2012.dot.state.co.us)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date 21-APR-2015 16:00:11
Uptime 1 days 22 hr. 26 min. 42 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File D:\product\11.2.0\tg_1\network\admin\listener.ora
Listener Log File d:\product\11.2.0\tg_1\diag\tnslsnr\CTMCSQL2012\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=CTMCSQL2012.dot.state.co.us)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "dg4msql" has 1 instance(s).
Instance "dg4msql", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
I copied TNS entry to the database TNSNAMES.ora and created a DB link and get error:
CREATE DATABASE LINK "EXTERNAL.ITS.DOT.STATE.CO.US@CODOT"
CONNECT TO "CoDOT"
IDENTIFIED BY <PWD>
USING 'dg4msql.its.dot.state.co.us';
Link : "EXTERNAL.ITS.DOT.STATE.CO.US@CODOT"
Error : ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from EXTERNAL@CODOTCheck if this helps you - https://community.oracle.com/thread/466786
Pradeep -
How can I connect to a windows server from a mac book pro
How can I connect to a windows server from a mac book pre?
I have a Dell Power Edge T110 ii in the office that has files and software I need to access when away from the office, when I am on the road I use a mac book pro and an iPad.
I am sorry if I am being a bit vague but this is all new to me, I have tried 3 IT guys but they can not find a way.
Any help is greatly appeciated. -
I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control. I have set the ReportPath and ReportServerUrl correctly. I am
getting an error message.
Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account?
I am getting the following error message:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.Hi bucaroov,
The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
Please follow these steps to solve the issue:
Logon the Report Server machine.
Open the Reporting Services Configuration Manager.
Copy the Report Server URL from 'Web Services URL'.
Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
not available, could you please post the error message.
Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
For more information, please see:
Walkthrough: Using the ReportViewer Control in Remote Mode:
http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT -
Error: 1021001 Failed to Establish Connection With SQL Database Server
Hello,
Someone you already MEETS it the following error during an essbase retrieve DLR.
My client oracle essbase on my server is 64bit, Essbase 11.1.2.2 x64
I run the odbc located in% windir% \ system32 \ odbcad32.exe
"Error: 1021001 Failed to ESTABLISH Connection With SQL Database Server. See log for more information"
Here is the log:
Received Command [SQLListDsn] from user [admin]
[2:50:33 p.m. Fri 28 September 2012] Local / CAS_TEST / / / 8168/Info (1042059)
Connected from [10.100.50.2]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1013091)
Received Command [SQLRetrieve] from user [admin]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021004)
Connection String is generated
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021041)
Connection String is [DSN = TEST_ORACLE; UID = ...; PWD = ...]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021006)
SELECT Statement [SELECT from dual;] is generated
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021013)
ODBC Layer Error: [IM004] ==> [[Microsoft] [ODBC Driver Manager] Driver's SQLAllocHandle we failed SQL_HANDLE_ENV]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021014)
ODBC Layer Error: Native Error code [0]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Error (1021001)
Failed to ESTABLISH Connection With SQL Database Server. See log for more information
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Warning (1080014)
Transaction [0x780001 (0x50659d19.0xc9e78)] aborted due to status [1021001].
When I try to go through OCI service name:
dbServerName: port / service_name
I have the following error message:
Solutions2: List of members 1423.CAS_TEST.CAS_TEST September 28, 2012 2:50:15 PM CEST Succeeded
Read SQL record September 28, 2012 2:50:35 PM CEST Failed
thank you in advance
Edited by: 851398 on 28 sept. 2012 06:31In essbase logs there is nothing special, same for windows log.
Everything I like is log in log view eas
[Fri Sep 28 17:52:11 2012]Local/CAS_TEST///4020/Info(1013205)
Received Command [Get Database Info]
[Fri Sep 28 17:52:11 2012]Local/CAS_TEST///4020/Info(1013205)
Received Command [Get Database State]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7580/Info(1013210)
User [admin] set active on database [CAS_TEST]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6720/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6720/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7304/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7304/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7572/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7572/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///8116/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/8116/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7384/Info(1013210)
User [admin] set active on database [CAS_TEST]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6592/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6592/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7972/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7972/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///216/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/216/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3104/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3104/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3472/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3472/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///8112/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/8112/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///4020/Info(1013205)
Received Command [Get Database Info]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3840/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3840/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7760/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7760/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7300/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7300/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7904/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7904/Info(1013091)
Received Command [OtlQuerySmartLists] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3612/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3612/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6732/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6732/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7576/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7576/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7268/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7268/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:27 2012]Local/CAS_TEST///7556/Info(1013210)
User [admin] set active on database [CAS_TEST]
[Fri Sep 28 17:52:29 2012]Local/CAS_TEST///8168/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:29 2012]Local/CAS_TEST/CAS_TEST/admin/8168/Info(1013091)
Received Command [SQLListDsn] from user [admin]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST///7564/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1013091)
Received Command [SQLRetrieve] from user [admin]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021004)
Connection String is generated
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021041)
Connection String is [DSN=TEST_ORACLE;UID=...;PWD=...;]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021006)
SELECT Statement [SELECT * from dual ] is generated
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021013)
ODBC Layer Error: [IM004] ==> [[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021014)
ODBC Layer Error: Native Error code [0]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Warning(1080014)
Transaction [ 0xb50001( 0x5065c7d7.0x31ce0 ) ] aborted due to status [1021001].
Have you an idea about the Merant driver to essbase?
Thank -
i m using repot engin to disply report its running in windows well in my local machine but whn i deployeed it to test server (AIX) it gave me this error server is websphere
E SRVE0026E: [Servlet Error]-[Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.]: java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:175)
at java.lang.Class.forName1(Native Method)
at java.lang.Class.forName(Class.java(Compiled Code))
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:91)
at java.awt.Font.initializeFont(Font.java:333)
at java.awt.Font.<init>(Font.java:368)
at com.actuate.ereport.engine.templateio.TmplReader.getFont(Unknown Source)
at com.actuate.ereport.engine.templateio.TmplReader.getFont(Unknown Source)
at com.actuate.ereport.engine.templateio.XMLTmplReader.handleFont(Unknown Source)
at com.actuate.ereport.engine.templateio.XMLTmplReader.closeObjects(Unknown Source)
at com.actuate.ereport.engine.templateio.XMLTmplReader.endElement(Unknown Source)
at com.actuate.ereport.engine.templateio.XMLTmplReader.startParsing(Unknown Source)
at com.actuate.ereport.engine.templateio.XMLTmplReader.readTemplate(Unknown Source)
at com.actuate.ereport.engine.templateio.TmplReader.ReadTemplateFromBytes(Unknown Source)
at com.actuate.ereport.engine.templateio.TmplReader.readTemplate(Unknown Source)
at com.actuate.ereport.engine.ACJEngine.readTemplate(Unknown Source)
at com.actuate.ereport.engine.ACJEngine.readTemplate(Unknown Source)
at com.actuate.ereport.eapi.factory.DesignFactoryImpl.load(Unknown Source)
at com.actuate.ereport.eapi.factory.DesignFactoryImpl.load(Unknown Source)
at ccrmsweb.actions.PrintRpts.execute(PrintRpts.java:129)
Please tell me wht exactly i have to do, i men exactly its very urgentCheck this thread:
Re: Can't connect to X11 window server using 'localhost:0.0' -
ORA-28545: error diagnosed by Net8 when connecting to an agent
Dear all,
This question has been asked many times in this forum, and I have gone to many threads in this forum, but unfortunately i failed.
I want to connect to MySQL database from oracle. I have the following configurations.
Oracle database enterprise edition 12c (12.1.0.2.0) 64bit on Windows server 2012 64bit
i have MySQL 5.6.11 on windows 7 64bit
i have downloaded ODBC driver from oracle delivery site (MySQL Connector/ODBC 5.3.4 MSI for Windows x86 (64bit))
i install the ODBC on my oracle server, a full installation which install the Unicode and Ansi versions both.
i create ODBC connection for Unicode by going to Control Panel-->Administrator Tools-->ODBC Data Sources (64-bit)-->System DSN. i test it and the test was successful.
i configure my Listner.ora, Tnsname.ora and initmysql.ora files as below;
Listner.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = c:\app\Administrator\product\12.1.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:c:\app\Administrator\product\12.1.0\dbhome_1\bin\oraclr12.dll")
(SID_DESC=
(SID_NAME = mysql)
(ORACLE_HOME = C:\app\Administrator\product\12.1.0\dbhome_1)
(PROGRAM = dg4odbc)
(ENVS=LD_LIBRARY_PATH = C:\app\Administrator\product\12.1.0\dbhome_1\LIB)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ORADEV.hct.org)(PORT = 1521))
Tnsnames.ora
PDBORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ORADEV.hct.org)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = pdborcl.hct.org)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ORADEV.hct.org)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.hct.org)
mysql =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = N410FS02)(PORT = 1521))
(CONNECT_DATA =
(SID = mysql)
(HS = OK)
initmysql.ora ( C:\app\Administrator\product\12.1.0\dbhome_1\hs\admin\)
HS_FDS_CONNECT_INFO = mysql
HS_FDS_TRACE_LEVEL = OFF
then i stop and start the listener, the listener status is below
LSNRCTL for 64-bit Windows: Version 12.1.0.2.0 - Production on 23-APR-2015 09:16
:52
Copyright (c) 1991, 2014, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ORADEV.hct.org)(PORT=152
1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 12.1.0.2.0 - Produ
ction
Start Date 23-APR-2015 09:13:56
Uptime 0 days 0 hr. 2 min. 59 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File c:\app\Administrator\product\12.1.0\dbhome_1\network\a
dmin\listener.ora
Listener Log File c:\app\Administrator\diag\tnslsnr\ORADEV\listener\aler
t\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ORADEV.hct.org)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "mysql" has 1 instance(s).
Instance "mysql", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl.hct.org" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB.hct.org" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "pdborcl.hct.org" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
tnsping MySQL
TNS Ping Utility for 64-bit Windows: Version 12.1.0.2.0 - Production on 23-APR-2
015 09:17:54
Copyright (c) 1997, 2014, Oracle. All rights reserved.
Used parameter files:
c:\app\Administrator\product\12.1.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = N410FS02
)(PORT = 1521)) (CONNECT_DATA = (SID = mysql)) (HS = OK))
OK (40 msec)
then i open sqlplus and connect to my pluggable database as sys user and create a public database link for the test schema which i already created in MySQL database.
create public database link mysql connect to test identified by test using 'mysql';
then i try the table1 which is in test schema in MySQL from sqlplus as below
SQL> select * from table1@mysql;
select * from table1@mysql
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from MYSQL
i have tried both the Ansi and Unicode versions of ODBC but the same issue.
where is the problem in my configuration?
Thank you.ODBC
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC]
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBC.INI]
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBC.INI\mysql]
"Driver"="C:\\Program Files\\MySQL\\Connector ODBC 5.3\\myodbc5w.dll"
"SERVER"="10.153.102.98"
"UID"="test"
"PWD"="test"
"PORT"="3306"
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBC.INI\ODBC Data Sources]
"mysql"="MySQL ODBC 5.3 Unicode Driver"
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI]
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI\MySQL ODBC 5.3 ANSI Driver]
"UsageCount"=dword:00000001
"Driver"="C:\\Program Files\\MySQL\\Connector ODBC 5.3\\myodbc5a.dll"
"Setup"="C:\\Program Files\\MySQL\\Connector ODBC 5.3\\myodbc5S.dll"
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI\MySQL ODBC 5.3 Unicode Driver]
"UsageCount"=dword:00000001
"Driver"="C:\\Program Files\\MySQL\\Connector ODBC 5.3\\myodbc5w.dll"
"Setup"="C:\\Program Files\\MySQL\\Connector ODBC 5.3\\myodbc5S.dll"
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI\ODBC Core]
"UsageCount"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI\ODBC Drivers]
"SQL Server"="Installed"
"Oracle in OraDB12Home1"="Installed"
"MySQL ODBC 5.3 ANSI Driver"="Installed"
"MySQL ODBC 5.3 Unicode Driver"="Installed"
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI\ODBC Translators]
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI\Oracle in OraDB12Home1]
"APILevel"="1"
"CPTimeout"="60"
"ConnectFunctions"="YYY"
"Driver"="c:\\app\\Administrator\\product\\12.1.0\\dbhome_1\\BIN\\SQORA32.DLL"
"DriverODBCVer"="03.51"
"FileUsage"="0"
"Setup"="c:\\app\\Administrator\\product\\12.1.0\\dbhome_1\\BIN\\SQORAS32.DLL"
"SQLLevel"="1"
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI\SQL Server]
"CPTimeout"="60"
"SQLLevel"="1"
"DriverODBCVer"="03.50"
"APILevel"="2"
"ConnectFunctions"="YYY"
"Setup"=hex(2):25,00,57,00,49,00,4e,00,44,00,49,00,52,00,25,00,5c,00,73,00,79,\
00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,00,71,00,6c,00,73,00,72,00,\
76,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,00,00
"UsageCount"=dword:00000001
"Driver"=hex(2):25,00,57,00,49,00,4e,00,44,00,49,00,52,00,25,00,5c,00,73,00,79,\
00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,53,00,51,00,4c,00,53,00,52,00,\
56,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,00,00
"FileUsage"="0"
Thanks -
Once again - ORA-28545: error diagnosed by Net8 when connecting to an agent
I'm trying to connect to a SQL server 2012
I've make the ODBC connections (called MOFIBO2, MOFIBO3, MOFIBO4) and i've a succesfull connection to then SQL server.
The Oracle Database is:
Oracle Database 11g Release 11.2.0.3.0 - 64bit Production
I've made 3 versions of the initdg4odbc.ora and they all look the same:
# This is a sample agent init file that contains the HS parameters that are
# needed for the Database Gateway for ODBC
# HS init parameters
HS_FDS_CONNECT_INFO = MOFIBOx (MOFIBO2, MOFIBO3 and MOFIBO4)
HS_FDS_TRACE_LEVEL = off
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
My lisener.ora look like this:
# listener.ora Network Configuration File: C:\app\Administrator\product\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = resp-ora01)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(SID_DESC =
(ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
(SID_NAME = RESPTEST)
(SID_DESC =
(SID_NAME=MOFIBO2)
(ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
(PROGRAM = dg4odbc)
(SID_DESC =
(SID_NAME=MOFIBO3)
(ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
(PROGRAM = dg4odbc)
(SID_DESC =
(SID_NAME=MOFIBO4)
(ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
(PROGRAM = dg4odbc)
ADR_BASE_LISTENER = C:\app\Administrator\product\11.2.0\dbhome_1\log
And my mofibo part of then tnsnames.ora look like this (I've made three variants because different "manuals" uses different methods ):
MOFIBO2=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=TCP)(HOST=resp-ora02)(PORT=1521))
(CONNECT_DATA=
(SID=MOFIBO2)
(HS=OK)
MOFIBO3=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=TCP)(HOST=resp-ora02)(PORT=1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID_NAME = MOFIBO3)
(HS=OK)
MOFIBO4=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=TCP)(HOST=resp-ora02)(PORT=1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MOFIBO4)
(HS=OK)
When tnsping to the three versions i get this:
C:\Users\Administrator>tnsping mofibo2
TNS Ping Utility for 64-bit Windows: Version 11.2.0.3.0 - Production on 24-APR-2014 12:48:17
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Used parameter files:
C:\app\Administrator\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=TCP)(HOST=resp-ora02)(PORT=1521)) (CONNECT_DATA= (SID=MOFIBO2)) (
HS=OK))
OK (10 msec)
C:\Users\Administrator>tnsping mofibo3
TNS Ping Utility for 64-bit Windows: Version 11.2.0.3.0 - Production on 24-APR-2014 12:48:23
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Used parameter files:
C:\app\Administrator\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=TCP)(HOST=resp-ora02)(PORT=1521)) (CONNECT_DATA = (SERVER = DEDIC
ATED) (SID_NAME = MOFIBO3)) (HS=OK))
OK (10 msec)
C:\Users\Administrator>tnsping mofibo4
TNS Ping Utility for 64-bit Windows: Version 11.2.0.3.0 - Production on 24-APR-2014 12:48:27
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Used parameter files:
C:\app\Administrator\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=TCP)(HOST=resp-ora02)(PORT=1521)) (CONNECT_DATA = (SERVER = DEDIC
ATED) (SERVICE_NAME = MOFIBO4)) (HS=OK))
OK (0 msec)
I created three database link with then following (username and password was in wright case):
create database link MOFIBODB2 connect to "<username>" identified by "<password>" using 'MOFIBO2';
create database link MOFIBODB3 connect to "<username>" identified by "<password>" using 'MOFIBO3';
create database link MOFIBODB4 connect to "<username>" identified by "<password>" using 'MOFIBO4';
when i was trying to select from a table (select * from customers@<DATABASELINKHERE>) i get the errors (substitute MOFIBO2 with MOFIBO3/4 and same error occours):
SQL> select * from customers@MOFIBODB2;
select * from customers@MOFIBODB2
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from MOFIBODB2
What is my mistake?Hi,
In the listener.ora you have the host as -
(HOST = resp-ora01)
but in the tnsnames.ora entries you have -
(HOST=resp-ora02)
The tnsnames.ora host must be the same as the listener host.
Unless you have a listener running on resp-ora02 it isn't clear why the tnsping returns a result.
Change the host in the tnsnames.ora and let us know what happens.
Regards,
Mike -
Connection Error: Digital editions could no connect to the activation server.
My question has to do with adobe digital editions. When I try to authorize my computer, it says "Connection Error: Digital editions could no connect to the activation server. Please make sure you are connected to the Internet." I´m sure that there is a connection to the internet .I have tried reinstalling ADE 2.01, Thanks for your help!
This is the Reader forum. The Digital Editions one is here:
http://forums.adobe.com/community/adobe_digital_editions -
Can't connect to X11 Windows Server - Error
Dear All,
Greetings!!
We had successfully installed ECC6.0 EHP7 with HANA Database on SUSE 11 SP3. Now we are in the process of upgrading the components in the ECC via SUM. When we try to start the upgrade via SUM using <SID>ADM userid in the Linux Machine, we are getting an JAVA Error like "Can't connect to X11 Windows Server". Please find the complete error log in the attached screenshot (SUM.pmg).
But when we try the same with the root userid, we can able to see the SUM GUI Opening Screen.
Please help us with suggestions or solutions at the earliest.
Regards,
ElaHello Ella,
Please follow the SUM upgrade guide for starting the SUM tool.
Start the SL controller on primary application server with command :
./STARTUP
After this, you can access the GUI from the browser :
http://<host>:4239/
Problem you described, seems to be related to variables.
Please set the variable DISPLAY for the SIDADM user.
Thanks.
Regards,
Gaurav -
Deployment error : Can't connect to X11 window server
Hello All,
i am facing an issue with deployment of the VC Model.
I obtained the log and it says " Can't connect to X11 window server ". The detailed log is below:
Error in compiling Flex application: java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:139)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:141)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:62)
at macromedia.fonts.JREFontManager.initializeSystemFonts(JREFontManager.java:242)
at macromedia.fonts.JREFontManager.createSetForSystemFont(JREFontManager.java:58)
at macromedia.fonts.CachedFontManager$FontCache.fetch(CachedFontManager.java:109)
at macromedia.util.LRUCache.get(LRUCache.java:114)
at macromedia.fonts.JREFontManager.getEntryFromSystem(JREFontManager.java:186)
at macromedia.swf.builder.tags.FontBuilder.<init>(FontBuilder.java:52)
at macromedia.css.FontFaceRule.initialize(FontFaceRule.java:82)
at macromedia.css.StyleDocumentHandler.endFontFace(StyleDocumentHandler.java:36)
at org.apache.batik.css.parser.Parser.parseFontFaceRule(Unknown Source)
at org.apache.batik.css.parser.Parser.parseStyleSheet(Unknown Source)
at macromedia.css.StyleParser.init(StyleParser.java:165)
at macromedia.css.StyleParser.<init>(StyleParser.java:89)
at macromedia.css.StyleSheet.parse(StyleSheet.java:71)
at flex.compiler.parser.MxmlParser$4.end(MxmlParser.java:1123)
at flex.compiler.parser.MxmlParser.endElement(MxmlParser.java:402)
at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
at org.apache.xerces.parsers.AbstractXMLDocumentParser.emptyElement(Unknown Source)
at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanStartElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.DTDConfiguration.parse(Unknown Source)
at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:143)
at flex.compiler.parser.MxmlParser.parseDocument(MxmlParser.java:4363)
at flex.compiler.MxmlLoader.parse(MxmlLoader.java:277)
at flex.compiler.MxmlLoader.loadComponentType(MxmlLoader.java:178)
at flex.compiler.MxmlLoader.loadComponent(MxmlLoader.java:204)
at flex.compiler.CachedComponentLoader.getComponent(CachedComponentLoader.java:197)
at flex.compiler.CachedComponentLoader.loadDefinition(CachedComponentLoader.java:101)
at flex.compiler.CachedComponentLoader.getDefinition(CachedComponentLoader.java:263)
at flex.compiler.CompositeLoader.getDefinition(CompositeLoader.java:54)
at flex.compiler.linker.Loader.getType(Loader.java:266)
at flex.compiler.linker.Loader.findType(Loader.java:248)
at flex.compiler.CompilerPackageManager.loadType(CompilerPackageManager.java:629)
at flex.compiler.MxmlCompiler.openDocument(MxmlCompiler.java:61)
at flex.compiler.MxmlCompiler.compile(MxmlCompiler.java:234)
at flex.tools.Mxmlc.main(Mxmlc.java:166
The version of VC is :
GML : 700.15.0.1
Client : 700.15.0.1
VCServer : 700.15.0.1
Flex : 700.15.0.1
Portal Content(HTMLBKit) : 700.15.0.1
Portal Connector : 700.15.0.1
I allready saw de note 886209 but this not working.
Is there any body who knows how to solve this
Thanks ,
Kurt RanftHi Kurt,
I am getting the same error, Can u just explain a little bit briefly, Because I am entirely new into SAP VC.
Where is that XML file and what is the chage that has to be made in that XML file?
Please help me to solve the problem.
Regards,
Palani -
Installation error : Can't connect to X11 window server using ':0.0
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
WHILE INSTALLING ORACLE10g ON FC1 GETING THIS ERROR
Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
:0.0
:0.0
Unable to start an interactive install session because of the following error:Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh: % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
HOW SHOULD I MAKE THE REQUIRED CHANGESCheck this thread:
Re: Can't connect to X11 window server using 'localhost:0.0'
Maybe you are looking for
-
Setting up my ipod touch can you use a gift card for setup of itunes account
setting up ipod touch says my gift card was invalid so i tried to use just credit card then gift card and credit card says itunes could not processes my request tried 20 times what do i do to finish my account setup
-
Help needed. PDF files won't open in IE8.
Hello guyz! I opened a PDF file in IE8 using Adobe Reader, but it won't open. It's a 14 MB file which I got from a blog. It just stops the downloading at KB and shows an error screen. I forgot what the error screens look like. Please help me fix this
-
In tabstrip control to display table control
Hi, I want to to display a table control under tabstrip tab , How can i write the programm. if any one knows pls reply me.
-
Cloning SAP instance on Windows
Hi - We have SAP on Windows server and our Database is on Unix. We want to make clone of this whole environment. From DB perspective it is easy - we can copy the database to another Unix Server. What do we have to do from Windows/SAP side? Can we jus
-
How do I update Client Push Settings to use the new Client 1203. Any help would be appreciated... I understand I can push out the package created but I want the default Client push to be new.