Mac OS X 10.5.7 -- take the leap?
Anyone update to 10.5.7 yet? Is it safe?
IT-GUY-765 wrote:
Technically, Adobe has dropped support for most Mac OS X users...
It says so in the CS4 system requirements:
"Mac OS
Multicore Intel® processor
Mac OS X v10.4.11–10.5.4..."
The complete specs are here
So if you are using the latest version of Mac OS X, your adobe software is already supposed to not work properly.
Why is this you might ask? The answer is quite obvious: Adobe just doesn't like Apple anymore. And hates mac users.
But please tell me how a software can be fully compatible with an OS upgrade released monthes after it's release ? And for your information, Apple always breaks things inside it's OS between release to keep things fast and reliable, whereas Windows still have some libraries from Windows 95 to have things compatible at the price of speed and reliability.
That is why software often breaks on mac from an upgrade to another (and not only Adobe products) whereas most of things stays compatible from a Windows to another. That's the price of efficiency, speed and reliability.
Similar Messages
-
How big is the leap from 10.1.2 to 10.1.3
We're nearing the end of a troublesome upgrade from jdev 9.0.4 to 10.1.2.
Now that 10.1.3 is out, I would like to know how risky it would be to take the leap and go to 10.1.3 now, instead of stop at 10.1.2 first.
I would like to read some experiences from readers who've done a similar migration, and whether the 10.1.2/10.1.3 differences are small enough to take this jump.
Anybody want to voice their opinion?I'm sure you will get alot of useful opinions on the this forum but I think something which is very important to take into account is what you gain by taking this risk. There are a whole range of features in the new 10.1.3 release which might make any risk much more acceptable.
The other point to consider it what technologies are you currently using - some may migrate better than others.
Regards
Grant Ronald
Oracle Product Management -
Hello All,
I have a 15" i7 Macbook Pro from early 2011. The past few weeks, it has been getting increasingly difficult to get on my computer. It takes the mac laptop two or three tries to boot successfully. It would turn on, show gray screen, shut down, turn on again, show gray screen, shutdown, and then turn on, show gray screen, before it can finally get to the dark gray log-in screen. Even when I finally get logged in to start working, thinking it would be okay now, it shuts down randomly.
I've ruled out the possibility of a software problem because I've just done a clean re-install of Mac OS X Mavericks on my computer just yesterday.
I did upgrade the RAM recently, about a month and a half ago, from 4GB to 16GB, I went to the apple store four days after that upgrade to have them do a hardware test, and clean the inside of my laptop, which helped with previous heat issues. When they did the hardware test, the hardware was all registered as fine from their system.
I've tried resetting the SMC, PRAM, and doing the internet recovery hardware test, but to no avail. I thought I could at least find out what parts needed to be replaced from the hardware test but it seems that when the hardware test is almost finished, the computer just shuts down, So I am unable to see the results.
My computer is also having battery issues, under battery condition, it says "replace now," parts have been ordered, waiting for arrival. But if the battery health is low, it should still boot up fine, it would just hold a significantly less charge.
Could this be a hard drive issue?
Has anyone had similar symptoms and how was it resolved?
Does anyone know what I can do to alleviate this issue?
I haven't had time to take it to Apple because I'm currently taking a 21 credit semester academically. I'm an art and design student so my computer is basically the bane of my existence. Help! Any constructive advice is welcomed!
Thank you so much for your input!
-Christina C.Problem description:
The Hard Disk is failing.
EtreCheck version: 2.0.11 (98)
Report generated November 4, 2014 at 7:59:28 AM EST
Hardware Information: ℹ️
MacBook Pro (15-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1440 x 900
AMD Radeon HD 6750M - VRAM: 1024 MB
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 0:3:43
Disk Information: ℹ️
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
HDV4 (disk0s2) / [Startup]: 749.30 GB (712.10 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Avast/components/fileshield/unsigned
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
/Library/Application Support/Avast/components/proxy/unsigned
[loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.avast.userinit.plist Support
Launch Daemons: ℹ️
[invalid?] com.adobe.SwitchBoard.plist Support
[loaded] com.avast.init.plist Support
[loaded] com.avast.uninstall.plist Support
[loaded] com.avast.update.plist Support
[invalid?] com.perion.searchprotectd.plist Support
User Launch Agents: ℹ️
[invalid?] com.avast.home.userinit.plist Support
[loaded] com.google.keystone.agent.plist Support
[invalid?] com.jdibackup.ZipCloud.autostart.plist Support
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
AdobePDFViewer: Version: 10.1.1 Support
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Default Browser: Version: 537 - SDK 10.9
User Internet Plug-ins: ℹ️
TroviNPAPIPlugin: Version: 1.0 - SDK 10.9 Support
Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
Avast Online Security
Trovi Search for Safari
3rd Party Preference Panes: ℹ️
None
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
16% mds
7% WindowServer
1% loginwindow
1% fontd
1% com.avast.daemon
Top Processes by Memory: ℹ️
120 MB com.avast.daemon
86 MB Google Chrome
52 MB Finder
52 MB WindowServer
41 MB Google Chrome Helper
Virtual Memory Information: ℹ️
13.45 GB Free RAM
1.34 GB Active RAM
944 MB Inactive RAM
1.43 GB Wired RAM
1.11 GB Page-ins
0 B Page-outs -
How can I take the files that were migrated from my PC to my Mac and add all those files to my current user instead of having 2 users? Having to log out just to sign in on a different user to access the files is absurd.
Do I make all the files sharable to all the NOW users on the mac then just delete the files? Or can i erase my account that I made when starting up my new mac and then just use the one with the transferred files?
I just dont want to have to og in and out of 2 different accounts .. Help please.
-NinaSorry. /Users is a folder path. It would be similar to C:\Users (if that exists on Windows).
So, in the Finder, select Computer from the Go menu.
You'll see Macintosh HD, double-click that to open it.
In there you'll see several folders. One is Users. That is where all the user Home folders exist. Select the other account's home folder and go to step 3.
If you have any more confusion, please stop and ask. We'll get there.
If you feel more comfortable, you can just log into that other account and move the files into /Users/Shared.
Then, log into the account you wish to use and copy the files from the Shared folder and paste them into your Home folder, wherever they belong, Documents, Music, Pictures, etc. That just takes a little more work. Transferring them into Shared, and then copying into your home sets the permissions on the files so that you won't have a problem accessing them later. The steps I provided just prevent you from having to do the double move, since you are not going to use the old account once you are done.
Quick unix shorthand. If someone gives you a file path that begins with a /, that means the root of the hard drive, ie Macintosh HD (if you haven't renamed it). The path separator in unix is /, not \.
A path that starts with ~/ means your Home folder, the one inside /Users named with your account name. -
My Mac assures me that I am connected to the internet, using Airport and also ethernet, but Safari never gives me a home page. Can I download Firefox onto a disk using my Windows PC and then take the disk to the Mac and upload Firefox to use on the Mac ?
You can grab a "full" installer (.dmg file) from this page (scroll down to your preferred language):
https://www.mozilla.org/firefox/all/ -
As a Mac user, what action do I take in relation to the Heartbleed bug?
As a Mac user, what action do I take in relation to the Heartbleed bug?
None except don't visit servers that have not updated their openssl server.
-
The photo print quality from my Mac to my Epson Artisan 810 is poor. I just purchased my iMac for my photography business in Jan. (this is my first Mac). When I first tried printing, I noticed the quality wasn't as good as I expected it to be. Then, I had to print 4-3.5x5s on a sheet, so I e-mailed the image to myself and opened it on my PC to print it (much easier to print that way on PC in Windows Photo Gallery - I think it's impossible to print that way in iPhoto). That's when I first noticed that when I take the same photo files (JPEGs) to my PC to print to the same printer without even uploading them to the PC, they print brighter and crisper from my PC.
I've already been on the phone and e-mail w/Applecare many times over this issue. We've tried creating a test user and printing from there, and we've tried reinstalling the OS. I've tried printing from iPhoto, ImageCapture, and Preview apps/utilities, all w/the same result - no comparison to the PC-printed versions (no enhancements have been performed on the PC).
I'm out of ideas, and so is Applecare. They say it's most likely a driver issue b/c the printer is outdated, and that the only solution is to buy a new printer. BUT it is a pain for me to purchase a new printer - it takes days of research due to the nature of my business and the fact that I need a printer that can print directly onto a disc. I love this printer and don't want to have to buy a new one if I don't have to.englishfreak2004 wrote:
Yes. I've checked for updates, and the driver I installed is the same as the one on Epson's website. I also spoke with Epson Customer Service, which was a dead end. Apple says the problem is due to an Epson driver issue (blaming Epson), but Epson says that with the older printers, it's actually Apple who creates the driver, so the problem is actually with Apple. Typical he-said, she-said...
Maybe not. Probably worth checking here:
Epson drivers for Mavericks:
http://www.epson.com/cgi-bin/Store/support/SupportMavericks.jsp -
I have a late 2012 iMac and a late 2009 mac mini. I want to know if I can take the 8 GB of ram from the iMac and install it in my mac mini.
According to Cruicial my mac mini could use:
Module Size: 8GB Kit (4GBx2)
Package: 204-pin SODIMM
Feature: DDR3 PC3-8500
Specs: DDR3 PC3-8500 • CL=7 • Unbuffered • NON-ECC • DDR3-1066 • 1.35V • 512Meg x 64
Also According to Cruical my iMac uses:
Module Size: 8GB Kit (4GBx2)
Package: 204-pin SODIMM
Feature: DDR3 PC3-12800
Specs: DDR3 PC3-12800 • CL=11 • Unbuffered • NON-ECC • DDR3-1600 • 1.35V
I want to increase the ram in both computers.
So, can I put the iMac ram in my mac mini and then I'd only have to buy ram for my iMac? Naturally the ulitmate test will be when I actually install it, but having an expectation of success or failure will allow me to plan on what to spend money on.
Thanks,
BearThanks for the responses. I probably wont even try as my priority is Ram for the mac mini. 2 is not enough. 8 for my imac is okay for now.
Somewhere I thought I'd heard that faster Ram would simply clock at the lower speed. It seems that I am incorrect.
Thanks,
Bear -
I have a lot of HD video on my hard drive that I eventually want to edit in iMovie, but just don't have the time now. It is clogging up the computer, though. How do I take the Hd clips off Mac for later editing?
See "Storage drive" here
Most commonly used backup methods
Th problem with HD video is it needs a fast external interface, so you should pick a external drive that uses the fastest interface your computer has to offer.
Performance rank fastest to slowest is
Thunderbolt, USB3, (newer Mac's)
Firewire 800, USB 2, Firewire 400, USB 1 (older Mac's)
Newer Windows PC's have USB3, older one's USB 2,1.
You need to format the drive if it comes FAT which a lot do, as FAT has a 4GB file size limit, so this won't work with large HD video files.
So if your going to use the drive only with a Mac, then head to Utlities > Disk Utility and format it Options: GUID Format: OS X Extended Journaled. (select the drive makers name and click Partition tab)
If your going to use the external drive with a PC, take it to the oldest PC you have and right click and format exFAT.
If you have a Windows XP machine and there is no exFAT, it can be downloaded for free from Microsoft.
Drives, partitions, formatting w/Mac's + PC's -
Can I take the old hard drive from a Mac Pro G5 and put it into a Mac Pro Dual Xeon?
Hello,
I have an old Mac Pro G5 that still runs fine but the video card is bad so you can't see anything. Can I take the hard drive out of the G5 and put it into the Mac Pro Xeon without losing the data on it?
Thanks!jenniferfromescanaba wrote:
Even if I go from the hard drive on the G5 to the next generation up from the G5 and put in that hard drive into that next generation up from the G5? Isn't the mounting nearly the same?
The storage bays are physically different from those in a G5. G5's had two bays in ther upper reat of the chassis, the Mac Pros have four slots running front-to-rear two thirds of the way up the chassis.
But as The Hatter says, you can use the G5 drives but may need to "manage" the data transfers. -
How do I stop applications from coming up when I power up my computer. If this were a Windows system I would be able to take the app out of the start up folder. On the Mac I don't know how.
The app (Excel) is in the dock. When I left click on it there is no check next to open at login.
Lets go back to the beginning when I installed ms office both word and excel were in the dock. then one day excel dissapeared. I put it back in the dock and that is when it started opening during login. There is only one X showing in the dock.
Maybe I have little gremlins. -
Should i Take the more expensive Mac mini (quad core) or dual core
Hey guys!
I don't now if I should take the Mac mini with dual core or quad core
I have never had a Mac so I don't now if the quad core (200$ more) is better than the dual core :o
I use it only for standard things (email, web, twitter Mac App Store games)
But it also should not stuck at bit more powerful apps and run crystal clear !!!
I want to have the Mac mini for few years !
Thanks now!The difference in real performance between dual core
and quad core machines is highly dependent on the
apps one uses and how many at the same time.
If you really only ever have one or perhaps two apps
open at once and if these apps are like web browsers
or email, you may never really notice a difference.
However, if you have many apps open at once or use
apps that can utilize many cores at the same time (typically
imaging and video apps), then there will be a significant
performance increase.
As far as gaming, by and large the most significant impact
on game performance is the graphics processing unit (GPU).
The integrated Intel HD4000 GPU in the Minis can typically
handle mid range games but will struggle on the very highend
games.
Also, if apps are not designed for mutiple core usage, there will be
now real improvement between 2 or 4 core machines. As a matter
of fact, I have a few apps that are faster on my MBP 13" 2.7 GHz
2 core i7 than on my quad core i7 2.0 GHz Mini Server for this
very reason.
So, the bottom line is that for some a quad core machine will
blow away a dual core machine while for others, there will be
no noticable difference. -
I bought a new mac and i migrate with time machine...but the backup was a little bit old and weren't save the latest modify i made in my website.. is it possible take the uploded site in iweb? sorry but i don't speak english very well
But what can I cut and paste? the html code or image and text directly?
depend on which template you used.
if you use iweb photos page template then you need to search for my photos page solutions in this forum.
@ot: cut and paste from the online version
@rw: You can drag an image from the website to the Desktop
have your try your methods in iweb photos page? -
I am interested in mirroring my calibrated mac monitor to a led tv but the tv profile takes over and negates my monitor profile. I want both to be calibrated to the same standard. Suggestions?
I am interested in mirroring my calibrated mac monitor to a led tv but the tv profile takes over and negates my monitor profile. I want both to be calibrated to the same standard. Suggestions?
-
I want to take the Mac Integration Basics 10.8 Exam ( 9L0-408)
Here is the question:
I have created an account with Pearson VUE, but I have no idea where to take it, or what to fill in for the "proctor username and password".
On Apple's site, it states that this exam can be taken with a computer online... without a proctor.
Anyone who had taken this exam... please respond!
Thanks!This took me a few very frustrating minutes to figure out. If you to go to http://training.apple.com/itpro/macinteg/exam, look at #2 under "Taking your Exam":
"Enter MacIntML in the Private Access code field and then complete the remaining steps to take the exam."
I had to cancel the online exam I had paid for to get a refund, and then go to the home page of your Pearson Vue account. Bottom says "Do you have a Private Access code?" click the + and enter MacIntML. This will take you to the page to purchase the 9L0-408NP - No Proctor version of the exam.
Once paid for I clicked "Begin Exam" and voila, no proctor log in required.
Maybe you are looking for
-
Hi There, I'm trying to make a default xml report that displays my sql query. I do not want to use the exportXML template, since no pagination is possible that way. (at least, I think it is) Now, i've made a XML page (only a xml header, nothing else)
-
How to get rid of the lock icon at the firewall menu?
how can i remove the lock icon which is located at options/security/firewall/enable then at the right side a lock icon then a box which is checked
-
Adding Previously Backed-Up CD's of iTunes, dont want to delete current..?
I don't want to delete my current iTunes Library... or lose the songs.... so when I put a back-up CD in of iTunes library previously backed up, will it delete my current stuff???? I have songs on the previously backed-up CDs that arent on here and so
-
Exam results not updated on Oracle CertView
I have passed the following exam : 1z0-052 - Oracle 11g Administration I in October 22 . The exam results are posted in my PearsonVUE account , but not updated in Oracle CertView acount . Only my previous exam ( 1z0-051 , which was in March ) details
-
How can I cut/paste a rasterized PDF?
I have a bunch of scanned-in PDF documents. I want to cut parts out from one scanned-in document and paste it into another scanned-in document. They aren't individual pictures, rather just pieces of the document. I can't figure out how to accomplish