Mac os x 10.6.8 won't start up after kernel panic

Hi, I got a kernel panic. When i restart the laptop the system gets stuck in the loading screen (apple logo and loading gif) with the fans spinning as if threre was no tomorrow. I tried booting in safe mode (power the comouter holding shift) but no changes I've been waiting for 1 hour in the loading window already...this is not normal..

Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup - Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)

Similar Messages

Acrobat Pro for Mac won't start, even after restarting the machine. Any suggestions?

Acrobat Pro for Mac won't start, even after restarting the machine. Any suggestions?

Hi Patrick,
Can you please mention the version of Adobe Acrobat that you are using and on what OS version. Also mention whether this problem has started recently and was running fine earlier or is it a fresh install and has never worked for you.
Have you tried uninstalling and reinstalling the product after you started facing this issue.
-Shashi

MacBook Pro won't start up after chime, MacBook Pro won't start up after chime

MacBook Pro won't start up after chime, MacBook Pro won't start up after chime

Try resetting the SMC.
Barry

Lync for mac (lync_14.0.7_131205) crashes with EXC_BAD_ACCESS at start up after upgrade to 10.9.2 (13C64)

Lync for mac (lync_14.0.7_131205) crashes with EXC_BAD_ACCESS at start up after upgrade to 10.9.2 (13C64)
I have removed and clean installed, including certs (http://technet.microsoft.com/en-us/library/jj945448%28v=office.14%29.aspx). There is no "unknown" cert either.
This is what I get:
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXC_BAD_ACCESS
Date/Time: 2014-02-25 21:24:24 +0000
Application Name: Microsoft Lync
Application Bundle ID: com.microsoft.Lync
Application Signature: UCCP
Application Version: 14.0.7.131205
Crashed Module Name: CoreFoundation
Crashed Module Version: 855.14
Crashed Module Offset: 0x00012192
Blame Module Name: Microsoft Lync
Blame Module Version: 14.0.7.131205
Blame Module Offset: 0x00f02d02
Application LCID: 1033
Extra app info: Reg=English Loc=0x0409
Crashed thread: 0

Please check if Lync for Mac 14.0.6 works correctly.
The following is a similar thread you can refer to:
http://social.technet.microsoft.com/Forums/lync/en-US/1ea7487f-5ded-4713-93c8-1abd594aea74/lync-for-mac-2011-crashing-since-update-to-1407?forum=ocsclients
Lisa Zheng
TechNet Community Support

Iphone 6 won't start up after new update

iphone 6 won't start up after update, what can I do?

And it stops at that screen and that is all that shows? Then you need to try and force the device into Recovery Mode and restore. See the instructions in this support document. If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

My C3 won't start up after get wet.

My C3 won't start up after get wet, i dries it and put it in uncooked rice for 24 hour, it still won't start up. When i charge it keep red light and wont start up. Can anyone help me? p/s:The phone still under warranty.

is correct, contact your local Xperi Care they might be able to tell you if they can repair the phone or the extend of the damage http://support.sonymobile.com/global-en/contactUs/

Power Mac G5 won't start up after a security update, please help!!!

Hi all,
My Power Mac G5 version 10.4.11 keeps showing a black video, no beep, no start up chim, this occured after updating a security patch 2008-7 from Apple website, asked to reboot then I encountered this mess.
The powerlight is turn on with solid white color. My display also has its powerlight turn on with solid white. But not nothing happens, except the fan noise becomes gradually louder and louder. I wait for hours ... but ...
My system just won't start up. Although I tried to reset the SMU, reseated RAM...
I tried also to re-install the OS by CD but it's impossible to insert it to the DVD tray.
Any help is greatly appreciated, thank you for your time.
Sgmed.

Hi BDAqua,
After weeks of strugle I can use my MAC as normal, but everytime I shut it down, she cannot wake-up, I had to refer to your hints in order to start it up again. So right now I can use my MAC every day with "SLEEP" mode.
She just cannot RE-START or wake up after a SHUTDOWN.
Any suggestion is greatly appreciated, here under I pasted the log file retrieved from Disk Utilities.
(I tried also to reset PMU, SMU and PRAM but nothing helped. Perhaps she is in need of a brand new PRAM battery???
Oct 26 23:54:04: Disk Utility started.
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Preparing to secure free space : “Untitled”
Creating Temporary File
Securely erasing file
Creating Temporary File
Securely erasing file
Secure Erase Free Space stopped after 14 hours.
89.0% complete.
Erase complete.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities, should be -rw-rw-r-- , they are -rwxrwxr-x
Permissions differ on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences, should be -rwxrwxr-x , they are -rw-rw-r--
User differs on ./Users/Shared/SC Info, should be 0, owner is 501
Group differs on ./private/etc/authorization, should be 80, group is 0
The privileges have been verified or repaired on the selected volume
Permissions verification complete
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities, should be -rw-rw-r-- , they are -rwxrwxr-x
Owner and group corrected on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities
Permissions corrected on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities
Permissions differ on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences, should be -rwxrwxr-x , they are -rw-rw-r--
Owner and group corrected on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences
Permissions corrected on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences
User differs on ./Users/Shared/SC Info, should be 0, owner is 501
Owner and group corrected on ./Users/Shared/SC Info
Permissions corrected on ./Users/Shared/SC Info
Group differs on ./private/etc/authorization, should be 80, group is 0
Owner and group corrected on ./private/etc/authorization
Permissions corrected on ./private/etc/authorization
Permissions repair complete
The privileges have been verified or repaired on the selected volume
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.5 GB (237,882,122,240 Bytes)
Used : 11.2 GB (12,042,969,088 Bytes)
Number of Files : 298,349
Number of Folders : 76,969
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
70 %)
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Oct 27 20:59:00: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.6 GB (237,949,358,080 Bytes)
Used : 11.2 GB (11,975,733,248 Bytes)
Number of Files : 298,359
Number of Folders : 76,970
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Oct 28 00:31:37: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Oct 28 18:50:53: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 28 21:00:10: Disk Utility started.
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Permissions repair complete
The privileges have been verified or repaired on the selected volume
Oct 29 19:55:10: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist, should be -rw-rw-r-- , they are -rw-r--r--
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player, should be -rwxrwxr-x , they are -rwxr-xr-x
Permissions differ on ./Library/Internet Plug-Ins/flashplayer.xpt, should be -rw-rw-r-- , they are -rw-r--r--
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist, should be -rw-rw-r-- , they are -rw-r--r--
Owner and group corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist
Permissions corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player, should be -rwxrwxr-x , they are -rwxr-xr-x
Owner and group corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player
Permissions corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player
Permissions differ on ./Library/Internet Plug-Ins/flashplayer.xpt, should be -rw-rw-r-- , they are -rw-r--r--
Owner and group corrected on ./Library/Internet Plug-Ins/flashplayer.xpt
Permissions corrected on ./Library/Internet Plug-Ins/flashplayer.xpt
Permissions repair complete
The privileges have been verified or repaired on the selected volume
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.6 GB (237,921,976,320 Bytes)
Used : 11.2 GB (12,003,115,008 Bytes)
Number of Files : 299,521
Number of Folders : 77,045
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Oct 29 20:22:20: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 30 17:14:49: Disk Utility started.
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.1 GB (237,409,587,200 Bytes)
Used : 11.7 GB (12,515,504,128 Bytes)
Number of Files : 299,790
Number of Folders : 77,188
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 30 19:41:53: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 31 20:48:58: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.1 GB (237,362,040,832 Bytes)
Used : 11.7 GB (12,563,050,496 Bytes)
Number of Files : 300,773
Number of Folders : 77,858
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Nov 3 15:48:08: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.1 GB (237,411,020,800 Bytes)
Used : 11.7 GB (12,514,070,528 Bytes)
Number of Files : 300,976
Number of Folders : 77,880
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Nov 3 16:12:13: Disk Utility started.

Power Mac G4 won't start up after shut down

I have a Power Mac G4 (dual 1 GHz with 2 GB of RAM) running OS X 10.4.11. It has the mirror drive doors and was once referred to as the “wind tunnel”.
The problem is that it will not start up after it has been shut down unless I first push the reset button. I have tried replacing the battery and resetting the p-ram. When I try to start it without first pushing the reset button nothing happens. The light for the start button doesn’t even come on. But if I disconnect the power, open it up and push the reset button it will start up and run perfectly.
Thank you for any suggestions that you might have.

Thanks BDAqua, it does sound like a bad capacitor. The PSU is one that I put in a few years back when Apple was giving them out so as to reduce the fan noise. I kept the old one until last week when I sent it off to be recycled. I suppose it would be a tough job to find the bad capacitor and I doubt that I would have the skill to replace it even if I could find it. It's not like I really need this power mac since I have a Mac Pro 1,1 but I do occasionally want to run something in OS 9 and I do love this machine for what ever reason. There was remarkably little dust inside but I went over it with a can of dust remover.
Don

Power Mac G5 won't start even after Repairing Disk and Permissions

I Repaired the Disk first by booting from the install disk and it did repair 1 item and then tried to reboot into safe mode to repair permissions and it didn't boot. I restarted by booting from the install disk again and repaired permissions and it seemed to repair alot of stuff. But it still won't start up.
I get stuck at the blue screen with the apple logo above a status bar that never moves.

Hi Larry,
Appears to be time for An Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
http://docs.info.apple.com/article.html?artnum=107120

Eclipse IDE won't start anymore after most recent security update

Hello everybody,
after today's security update the Eclipse IDE won't start anymore on my system, I just receive the following error message:
A Java Runtime Environment (JRE) or Java Development Kit (JDK) must be available in order to run Eclipse.
No Java virtual machine was found after searching the following locations: /Applications/eclipse/Eclipse.app/Contents/MacOS/jre/bin/
java
'java' in your current PATH
Java is installed and Eclipse ran smoothly until I upgraded. Other Java programs like Visual Paradigm still work without problems.
Does anybody have an idea what I can do about this? I have already tried repairing permissions, to no avail.
Best regards,
Björn
Mac Pro Mac OS X (10.4.9)

I have narrowed down the problem even more:
Obviously system path variables are not set anymore on my system for UNIX processes that are started in background, whereas starting applications from terminal using the open command ('open Gimp.app' for instance) still works without any problems.
Any ideas where to change this behaviour?

Motion 4 won't start - even after reinstall

Yesterday, I discovered that Motion 4 wouldn't open or save files. The menu just wouldn't open. Save As didn't work either. I tried to delete the prefs files, but the result was that Motion didn't open at all when I tried to launch it. I then reinstalled Motion from the original DVD's, restarted - and the same problem is there: Motion won't open. The spinning wheel goes forever, and there is no indication that Motion is able to launch. - Any suggestions? I have the lates versions of MacOSX 10.6 6 and Motion (FCStudio), I have 12 Gbyte RAM and I am using the iMac 27 inch 2.8 GHz Intel Core i5.

Sorry if my explanation wasn't clear enough. I used the suggested FCS Remover software (see above) to remove the apps, I then repaired rights, restarted the Mac, installed the complete FCStudio from the DVD's, ran the Software Update, restarted the Mac, tried to start first FCP, then DVDStudioPro, then Compressor - with the same result: none of them would load properly. The spinning wheel turned forever.
Later created a new user account (with Admin rights) on the Mac, switched to that user and tried to start FCP. The same result: the app won't start.
I started the apps from within the Applications folder, not from the Doc.
I was able to talk with a tech guy at Apple Support today, and the only thing he could do was to send me a document with instructions about deleting prefs. I already did that, with no result.
I guess I need help from an experienced support person to go through my Mac and find the reason behind this sudden and strange behavior.

Macbook Pro won't load past white loading screen when turned on after kernel panics

Hello,
I have a Macbook Pro and recently its been having repeated kernel panics. In the past few days its been turning off every few minutes or so. yesterday it had one and now when I try to turn it on it doesn't load. I get the white loading screen with the apple logo and a loading bar underneath. But after the bar fills about 5% of the way (if that) the bar just disappears and the spinning loading icon just keeps going without anything happening (however long I leave it).
Please can someone give me some suggestions to fix this. Just a few things to note:
a) I'm not great with computers so any fixes please explain in the most simple terms
b) I have VERY important work files on there that are NOT backed up (big mistake I know), so please only suggest fixes that will not remove these Microsoft Word files. Guaranteeing the safety of my work is paramount with any suggestions.
c) I may not have any of the disks which came with the Macbook Pro originally (though I may somewhere)
d) I've read some other forum posts and it seems that I need to know the details of my operating system. I don't know these and have no way of accessing them on the computer (for obvious reasons). Its a late 2011 Macbook Pro if that is of any help.
A massive thank you to anyone who can suggest a fix to these, I shall be eternally grateful.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 9
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Computer won't start up after changing permissions.

I accidentally changed the permissions for all of the files on my hard drive. Now, Leopard won't start up. And to top it all off I conveniently can not find my Leopard disk. I did, however, locate my Tiger disk but the computer won't start from the CD drive either.
I also thought that I could install Tiger on an external Hard Drive using my sisters computer but Tiger would not install on the USB Hard Drive because it said Mac OS X could not start from the external hard drive.
It won't start up in "Safe Mode (holding the SHIFT key)".
Anybody have any suggestions?

You can, in addition to Barry's excellent suggestions, reset the SMU.

Computer won't start up after 10.4.9 upgrade!

Hello,
I performed the upgrade to 10.4.9 on my Mac book pro, and during the installation of the upgrade the screen became blue and the computer froze. It won't start up again (I get the screen with the apple logo and the whhel just keeps turning and turning....)
Any ideas?
(I'm travelling and far from an Apple Centre)
Thank you
G.

Hello gborsel.
Problems arising right after installing a system update are usually the result of some filesystem corruption that should have been fixed first, or not having installed the update properly (e.g. applications running while installing it), or having ignored Apple’s “Important: Please read before installing” warnings, etc.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all filesystem issues, if any, reinstall the update using the combo installer:
About the Mac OS X 10.4.9 Combo Update
Mac OS X 10.4.9 Combo Update for PowerPC
Mac OS X 10.4.9 Combo Update for Intel
After installing the update, the computer may restart twice and the first restart may take several minutes. This is normal.
If you cannot do this by normal means, but have an external HD with Mac OS X 10.4 installed from which to boot your Mac, or have access to another Mac with Mac OS X 10.4 installed and with a FireWire port to which connect your Mac in Target Disk Mode, you may be able to fix the problem by starting up that way, verifying/repairing the disk, then reinstalling the combo update (on the disk that doesn’t boot, not on the disk from which you’re booting to do this).
If the problem persists, you’ll have to consider doing an Archive and Install, but make sure first that all the filesystem issues, if any, have been fixed, that you have enough space available on disk, and that all your data has been backed up (which again you can do connecting your Mac in Target Disk Mode to another Mac if you cannot do it by other means).
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates

Won't boot, loud fan noise after kernel panic?

So I got that kernel panic screen yesterday, turned it off, and now when I try to turn it on, the screen remains black and the fan comes on really loud. After about 30 seconds it stops. I tried inserting the original disc, but it won't go in the whole way. I've been using the laptop pretty heavily lately, but haven't damaged it that I know of. The battery has been dead for a while now - relying completely on the adapter.
Any suggestions would be appreciated!

I have a similar problem. My son was using the computer at the time so I don't know if he saw the kernel panic. The screen is black and the computer won't boot. The fan runs loudly and doesn't stop. The battery is relatively new, about six months old. I've tried plugging in an external monitor but there's no signal.
I have tried two different power adapters. One has showed orange and quickly went to green, then the light went out. The second adapter is third party but it seems to be getting power to the Mac. To complicate matters further, there is a DVD stuck in the drive. If the Mac is dead, I'd like to at least get the DVD out of the drive!
Thanks in advance for any ideas.

Mac os x 10.6.8 won't start up after kernel panic

Similar Messages

Maybe you are looking for