Mac OS X 10.6 all in one printer

I have a Mac OS X 10.6 and im trying to install the HP ENVY 5660 and it says it doesn't have the software. do i have to get a new printer? 

Hi,
The printer is not compatible with your OS, it is supported on 10.7 or newer OS versions.
You will eiter need another printer which is compatible with your operating system, or upgrade your OS if possible.. the latest OS update is available for free f your Mac meets its requirements:
https://www.apple.com/osx/how-to-upgrade/?.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Looking for an All-In-One Printer Rec. with Mac

    Hello,
    I'm looking for a Color Laser All-In-One printer, with ADF and Networking capability for under $600. Any recommendations of printers that work well with Mac? I know the HP's are good, but my concern is with their software. I've had nightmare experiences with them.
    Thanks!

    Bought the HP Color LaserJet 1312nfi for 399.99.

  • Deskjet 2540 all in one printer - does the scanning work with Mac OS Yosemite 10.10.1 ?

    I was trying to scan a document using this new printer and my Mac OS Yosemite 10.10.1 and I cannot even find the page that allows me to scan since now it is all through the computer.  Is this printer compatible with this operating system? and if so, what can I do to see the page where the file actually shows up to scan?
    thanks,
    Natali

    Hello NatDeskjet2540,
    Welcome to the HP Support Forums!
    Regarding your inquiry into scanning with 10.10 and the Deskjet 2540, I would like to help. The software you need to install is here: HP Deskjet 2540 All-in-One Printer series Full Feature Software and Drivers. Once installed, you can access the the walk through here: Scan from OS X v10.9 Mavericks With the Full Feature HP Software for HP Multifunction Printers.
    Hope this help, let me know.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • After upgrading to Mac OS 10.9 My HP Deskjet F4580 all in one printer no longer scans. How can we fix it?

    Hi All,
    I recently upgraded to Mac OS 10.9 Mavericks, but now my HP Deskjet F4580 All in one printer will not scan any documents either as PDF or as JPG, how can we fix this?

    I have simialr problems, after i scanned the ducuments or pictures, i can save it for only once, but the file is just black pictures with many lines through them. When i try to save it again, then it says ''An error has occurred saving the file because it could not be written to.  Check the properties for the file to make sure it is not read-only.', which then doesn't allow me to do anything of saving the file or even just to print it out.

  • HP ENVY 4500 e-All-in-One Printer/Mac OS 10.6/can't scan multiple pages as single document/file

    Mac OS X 10.6.8
    HP Scan app 4.4.1
            In the HP ENVY 4500 e-All-in-One Printer support page for scanning with a full feature driver installed. Under "How to scan a multi-page original into a single file for HP Scan software version 4.0. Everything is OK until after I've scanned the documents and clicked "Done". (Step # 6) & Click Send , click Folder , name your file, and then save the file to the computer.(Step # 7)
    This is where I go wrong. I can't find the Format drop-down menu to complete Steps 8 & 9.
    Click the Format drop-down menu, select Contents , and then check the box to Save all items to a single file . 
    Click Save .
    This question was solved.
    View Solution.

    Hi MaWoo, 
    Thanks for your post and welcome to HP Forum. 
    Please make sure you select PDF or Searchable PDF as the Format. You should then find a box to check for "Combine into single document". 
    Best regards,
    Mandy
    Say "Thanks" by clicking the Thumb up in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"
    Although I work for HP my posts and replies are my own

  • I am unable to scan using the hp office jet pro 8500 wireless all in one printer from an I-MAC

    I have a new I-MAC OS Lion computer and an older HP Officejet Pro 8500 wireless all-in-one printer, scanner, fax, photo.  I cannot scan, though I can print and I can fax.  The error message says I must be connected to the network, and yet I am connected.  The only diagnostic tool available is for MS systems only.  Help???

    Hi,
    Make sure to use any scan method available for Lion.
    If you have the HP Scan application installed, be aware that the used software version is not intended for Lion.
    Please follow the steps below to find what scan methods may be used on the OS:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01910186&lc=en&cc=us&dlc=en&product=3752459
    If there is still any problem while trying to scan, also make sure to install the latest HP Printer Driver 2.9 by clicking the Apple icon and then Software Update.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Need installer for HP e-all in one printer d411c for Mac OS 10.8.1

    I am unable to setup my new HP e-all in one printer d411c on my MacBook Pro running Mac OS 10.8.1.  Where can I down load driver for the printer?

    I would look on HP's site first. Maybe here http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-107206- 1&cc=us&dlc=en&lc=en&os=219&product=5150158&sw_lang=

  • Installing software for MAC 0S X 106.8 and ENVY 7645 all in one printer

    Is there a way to download software so that my MAC OS X 10.6.8 and work with my new HP ENVY 7645 all-in-one printer?
    If so, please tell me how to do that?  Thanks!

    Hi,
    I afraid not.
    The printer is only supported on 10.7 or newer OS versions, as listed within the System Requirements below:
    http://support.hp.com/us-en/document/c04353671/
    If your Mac support Yosemite you may upgrade your operating system to 10.10 for free:
    https://www.apple.com/osx/how-to-upgrade/?
    The other option os to replace the printer with another model which is compatible with your operating system.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I just upgraded to mac osx lion and my 7410 all-in-one printer will not work

    I cannot get my hp officejet 7410 all-in-one printer to work with Mac OS X Lion 

    hi,
    check this link for Mac 10.7 installation guide.
    l0ri3
    ~Though I work with HP my posts and replies are my own and not from HP.~

  • I recently purchased a Mac mini with the Yosemite operating system, but I cannot find a driver that works for a canon MP 450 all in one printer.

    I need a driver for a Canon MP 450 all in one printer to be used with a Mac mini with the Yosemite operating system.
    Canon does not have a driver. Third party providers drivers do not work with "Yosemite."
    Any suggestions?

    Canon does seem to have a driver.... http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp450#DriversAndSoftware

  • I have a Mac OS 10.6.7 that will not activate the scanner option on a C7280 HP All in One Printer, Fax, Scanner - the Printer works fine but the scanner does not - any suggestions?

    I have a Mac OS 10.6.7 that will not activate the scanner portion of an HP C7280 All in One - prints fine  - but won't activate scanner.

    I have the same problem with an HP Scanjet 8250 and my Epson Stylus NX400.  I have reloaded allegedly updated drivers.  I have researched using SANE.  Neither scanner wants to work since the  OS X10.6 update.  I have found very little out there about this problem.  
    Can anyone help me make these bricks work?  Really would like a solution that won't cost me hundreds to replace the equipment. Thanks so much.

  • Mac os 10.7.5 HP Deskjet 2540 All-in-One Printer

    Hello, I've just bought a HP printer, but i can't connect the wirelles with my mac. Is a HP deskjet 2540 All-in-One Printer, and the mac os x opperating system is 10.7.5 Lion. Is there a way to connect them or not?
    thanks in advance.

    Dear cblins,
    Here you have the full software to install your multifunction:
    http://ftp.hp.com/pub/softlib/software12/COL52008/mp-125743-5/HP-Deskjet-2540-series_v12.34.0.dmg
    And here you have a document where tells you how to install it by wireless:
    http://support.hp.com/us-en/product/HP-Deskjet-2540-All-in-One-Printer-series/5295960/model/5295961/...
    I hope you find it helpful.
    Greetings.
    * I am not an employee of HP, my work is voluntary.
    If this answer was helpful and clarify or resolve your problem, please mark the issue as resolved and click my star next to give a kudo as thanks.
    I am not an employee of HP, my work is voluntary. If this answer has been helpful and clarifies or solves your problem, please click the button
    and click on the icon if you want acknowledge the assistance.

  • Driver for HP 6110 All in One Printer for MAC OS X 10.6.8

    Your Search: Is the driver for HP 6110 All in One Printer the same for MAC OS X 10.6 as for MAC OS X 10.6.8? 

    Hi JCWG. To answer your question, Yes the driver is the same.  Do you have questions about the install? Just in case you need it, here is the link to take you to the download of the software and drivers.  http://goo.gl/njt723;
    If you have any other questions, please feel free to write back
    Thank you
    Waterboy71
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • I Have a Mac 10.2 and a HP 6700 all-in-one printer,when I set-up to print the top line of the image is cut off

    I Have a Mac 10.2 and a HP 6700 all-in-one printer,when I set-up to print the top line of the image is cut off

    If there isn't a Page Setup in the Print Dialog, open Text Edit>Edit>Page Setup, check borders there or use Custom Page setup & save.

  • Installing software for my HP psc 1210 all-in-one printer on to my Mac?

    I have downloaded new software and drivers for my all-in-one printer. I am running OS X 10.5.2 on a 20" 2.16 GHz Intel Core 2 Duo. The computer recognises that a printer is present and I can print with no problems. The problem that I'm having is with the scanner function. I don't think that the HP software is registering that there is a printer present. When I go into the HP setup assistant no printer comes up in the selection window. When I go into Printer & Fax via system preferences the HP psc 1210 series comes up as the default printer. I've had this problems before but cannot remember how I rectified it. I'm sure it got something to do with erasing the driver's off the computer and starting over again. Can anyone please help me or point me in the right direction. Thanks

    Hello,
    Here is a link to a support document on hp.com on how to install on OS X Mavericks.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&tmp_track_link=ot_faqs/top_issues/en_u...
    Let me know if this was usefull by clicking on the Kudos button.
    I work for HP.
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS STAR on the left to say “Thanks” for helping!

Maybe you are looking for

  • How do I find the FTP info for my site?

    I created a site with Wix.com. Since then I've been exploring Dreamweaver, and the author of "Dreamweaver for Dummies" suggets that the best way to make changes to my existing site is to use Dreamweaver's FTP capabailities to download the existing pa

  • Cannot remove encryption from external hard drive

    I have a Hitachi 500gb external Hard drive that I encrypted with Bit locker on a Windows 7 computer. After 3 years I want to use the Hard drive for something else and find that I can't decrypt it. I no longer have the computer that I originally decry

  • IPhoto - how to create jpegs on a CD at 72 dpi?

    I need to provide a copy of a picture on a CD.  The image needs to be a JPEG at 72 dpi.  How do I do this?  The  original file is in iPhoto and is 2448 x 3264 (2.2MB). 

  • Hyperlinking from a PDF to a website

    Hello, I have a PDF that is basically a map image. It has several points on it that are representing water wells. I would like to link these points to a table from a web site, so the beginning of the link would be http://www..... How do I do this?

  • Possible to create an Application from Spreadsheet with Korean?

    When I try to use the wizard from importing a .csv file with Korean, Arabic, Japanese, etc. I choose UTF-8 as the File Character set, but the text comes in as "????-?????" Is there a way to get around this? Thanks.