Mac OS X 10.6 Updates

Hello,
Does anyone has the list for Snow Leopard, iWork '09 & iLife '09 updates?
I just want to download them as a preparation if I reinstalled my system and want to apply update ASAP without using Software Update (as my internet connection is not always good)

All system updates are included in a combo updater, hence the reason they are much larger than the incremental updaters.
It does not include any updates for other than system software. Updates for iWork, iLife, firmware, Airport, etc. are not part of a combo updater. Combo updaters include system and security updates only.

Similar Messages

Palm Missing Localization Information Display after Mac OS 10.4.6 Update

Recently I installed the Mac OS 10.4.6 update after confirming that it should improve some minor issues with "Hot Synching".
Previously I could "Hot Synch" with my Palm Mac Desk Top software 4.2.1 and also with my PC with no issues. My Palm is using Palm OS 4.5, I believe.
Now I can still can "Hot Sync" on my Mac--with no issues. However, when I take the Palm out of the USB Cradle and try to access the Palm Display page with the featured icons, I get a very unusual error:
"Application can not be launched because it is missing localization info file xxx--enUS.prc."
I checked the Palm site and entered the error message and the response was returned that indicated "several applications with the Palm Tungsten T require overlay files to run properly. "Dialer, SMS, & WAP Browser" require and overlay "prc" file that determines which language the application displays on the device. If this "prc" file is missing, it will cause this message to be displayed."
I was instructed to install the "xxx_enUS.prc" using the Palm Install tool.
I installed all of the "xxx_enUS.prc" files on Disk 2 and have performed a "Hot Sync" again. A successful "Hot Synch" was performed.
The above message is still displayed on the Palm screen even after that successful "Hot Synch".
I can not use any of the screen icons to select any of the features or vprograms on the Palm.
The face buttons can be depressed but the selection from the Palm hand held icons with the stylus can not be accessed as the "missing localization info, ect" is displayed.
I have performed soft resets to no avail.
I still can not get this issues resolved.
Recently I instlled iSynch and the problems still occur.
Anyone out there have any suggestions.
POWER MAC G-4 (933 MHz QuickSilver) Mac OS X (10.4.6) iSite
POWER MAC G-4 (933 MHz QuickSilver) Mac OS X (10.4.6) iSite

When I do Command-I, I see that I have read/write access for the local drive - depending on the machine I am sitting at - and the other networkeded drives allow read only.
I guess the question is - how does the system know a user with the same username and password are actually the same person?
Robert

Mac OS 10.4.6 Update and Palm Hand Held Issues

Recently I installed the Mac OS 10.4.6 update after confirming that it should improve some minor issues with "Hot Synching".
Previously I could "Hot Synch" with my Palm Mac Desk Top software 4.2.1 and also with my PC with no issues.
I noticed now I can "Hot Sync" on my Mac--with no issues. However, when I take the Palm out of the USB Cradel and try to access the Palm Display page with the featured icons, I get a very unusual error:
"Application can not be launched because it is missing localization info file xxx--enUS.prc."
I checked the Palm site and entered the error message and the response was returned that indicated "several applications with the Palm Tungsten T require overlay files to run properly. "Dialer, SMS, & WAP Browser" require and overlay "prc" file that determines which language he application displays on the device. If this "prc" file is missing, it will cause this message to be displayed."
I was instructed to install the "xxx_enUS.prc" using the Palm Install tool.
I installed all of the "xxx_enUS.prc" files on Disk 2 and have performed a "Hot Sync" again. A successful "Hot Synch" was performed.
The above message is still displayed on the Palm screen even after that successful "Hot Synch".
I can not use any of the screen icons to select any of the features or vprograms on the Palm.
The face buttons can be depressed but the selection from the Palm hand held icons with the stylus can not be accessed as the "missing localization info, ect" is displayed.
I have performed soft resets to no avail.
I still can not get this issues resolved.
Anyone out there have any suggestions.
POWER MAC G-4 (933 MHz QuickSilver) Mac OS X (10.4.5) iSite

I don't use the synch. option. However, my RSS feeds are updating without problem after the update. If I remember correctly, the RSS feed update was affected by synching through .Mac? Is that true?
What method did you use to update your system. As a rule, I use the combo update. If you used the incremental method, I suggest using the combo update. Remember to repair permissions via Disk Utility after the update.

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.
The only thing that I can think of that might be causing the issues that I have a Mac Mini on Mavericks.
Dave

Hi
I have discovered that my question above is a non-question. A user triggered by looking at the below article about Illustrator 2014 cc 17.0.2
http://helpx.adobe.com/illustrator/release-note/illustrator-17-0-2-release-notes.html
He had recently upgraded from wht we now know is 18.0 to 18.1 which is the latest version. He read the above artic
le and supposed that it was a bug fix release for his version - because the v17 ov18 number is not often displayed. It is usually just 2014 CC.
I have asked him to post a bug report about Adobe Illustrator CC 2014.1
Dave

Problem description: mac mail not opening, software updates not working, app store not opening. imac osx 10.9.5

Problem description:
mac mail not opening, software updates not working, app store not opening. 10.9.5
EtreCheck version: 2.0.11 (98)
Report generated 1 December 2014 16:51:49 CET
Hardware Information: ℹ️
iMac (21.5-inch, Late 2009) (Verified)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
12 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1920 x 1080
BenQ GL2240 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 1:32:17
Disk Information: ℹ️
WDC WD5000AAKS-40V2B0 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (164.03 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GA11N
USB Information: ℹ️
EPSON EPSON Epson Stylus S22 Series
Canon MX410 series
ASMedia AS2105 1 TB
S.M.A.R.T. Status: Verified
EFI (disk3s1) <not mounted> : 210 MB
Backup (disk3s2) /Volumes/Backup : 999.86 GB (506.24 GB free)
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader 7.95 GB
S.M.A.R.T. Status: Verified
EOS_DIGITAL (disk1s1) /Volumes/EOS_DIGITAL : 7.94 GB (7.83 GB free)
Western Digital My Book 1140 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
2TB (disk2s2) /Volumes/2TB : 2.00 TB (1.50 TB free)
Wacom Co.,Ltd. CTE-450
Contour Design ShuttlePRO v2
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 24217.979618) Support
[not loaded] com.parallels.kext.hypervisor (9.0 24217.979618) Support
[not loaded] com.parallels.kext.netbridge (9.0 24217.979618) Support
[not loaded] com.parallels.kext.usbconnect (9.0 24217.979618) Support
[not loaded] com.parallels.kext.vnic (9.0 24217.979618) Support
/Applications/Toast 10 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
[not loaded] xxx.qnation.PeerGuardian (1.1.9) Support
/System/Library/Extensions
[not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) Support
[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ℹ️
ParallelsDesktopTransporter: Path: /Library/StartupItems/ParallelsDesktopTransporter
WkSvMacX: Path: /Library/StartupItems/WkSvMacX
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist Support
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS4ServiceManager.plist Support
[running] com.epson.epw.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist Support
[failed] com.adobe.fpsaud.plist Support
[loaded] com.adobe.versioncueCS4.plist Support
[loaded] com.barebones.textwrangler.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[not loaded] com.gopro.stereomodestatus.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[invalid?] com.tvmobili.tvmobilisvcd.plist Support
[loaded] fi.polar.libpolar.plist Support
[running] fi.polar.polard.plist Support
[failed] xxx.qnation.PeerGuardian.kextload.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[running] com.macpaw.CleanMyMac.volumeWatcher.plist Support
[invalid?] com.plexapp.helper.plist Support
[not loaded] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
SmartDaemon Application (/Library/Application Support/CleverFiles/SmartDaemon.app)
SilverKeeper Scheduler ApplicationHidden (/Applications/SilverKeeper.app/Contents/Resources/SilverKeeper Scheduler.app)
Dropbox Application (/Applications/Dropbox.app)
Garmin ANT Agent UNKNOWN (missing value)
Internet Plug-ins: ℹ️
DirectorShockwave: Version: 11.5.7r609 Support
Google Earth Web Plug-in: Version: 6.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
PandoWebInst: Version: 1.0 Support
AdobePDFViewerNPAPI: Version: 10.1.12 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.0 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.239
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.0.0 Support
AdobePDFViewer: Version: 10.1.12 Support
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
fbplugin_1_0_3: Version: (null) Support
Safari Extensions: ℹ️
Open in Internet Explorer
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS4 Support
DivX Support
Flash Player Support
Flip4Mac WMV Support
GoPro Support
Growl Support
Java Support
MacFUSE Support
MenuMeters Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: NO - Auto backup turned off
Destinations:
Back Up [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
      12% Google Chrome
      12% WindowServer
      4% Dock
      2% Little Snitch Agent
      2% SystemUIServer
Top Processes by Memory: ℹ️
399 MB iTunes
322 MB mds_stores
216 MB Google Chrome Helper
193 MB Google Chrome
155 MB com.apple.IconServicesAgent
Virtual Memory Information: ℹ️
6.64 GB Free RAM
3.51 GB Active RAM
1.36 GB Inactive RAM
1.11 GB Wired RAM
1.91 GB Page-ins
0 B Page-outs

[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
Un-install according to the developer's un-install instructions.
You do not need to use cleaning programs. They can destroy your computer operation as they may already have done.
CleanMyMac - Uninstall
CleanMyMac2 Un-install
After un-installing, run this program to make sure you got all the pieces.
EasyFind – Spotlight Replacement
Do a backup.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.appstore.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

My sister has a mac and i want to update my phone onto the computer but i dont want her to see all my stuff can you somehow have more than one itunes account on the same computer so my stuff with save?

my sister has a mac and i want to update my phone onto the computer but i dont want her to see all my stuff can you somehow have more than one itunes account on the same macbook so my stuff with save?

How to use multiple iPhone, iPad, or iPod devices with one computer. The only way is for you to have a separate user account to log into on that computer.

I am a new mac user and tried to update my firefox but now i have multiple foxes and a half fox fix something? how do i get it all together in one and be sure i have current version on only?

i am a new mac user and tried to update my firefox but now i have multiple foxes and a half fox fix something? how do i get it all together in one and be sure i have current version on only?

Hi there
I think in this case, you may be best to speak with Microsoft about this, as it does seem like an issue with Office, and not your Mac.
Follow this link, to find your local Microsoft Support contact number.
Or perhaps create a new topic in the Microsoft Support Communities
Good luck

HT1338 I have os 10.5.8 software on my mac and I need to update the software on my mac so I can update my iphone 4s, every time I try to update my mac with the 6.0 it says it doesn't need any updates, but my mac still has 10.5.8.... any help?? Please...

I have os 10.5.8 software on my mac and I need to update the software on my mac so I can update my iphone 4s, every time I try to update my mac with the 6.0 it says it doesn't need any updates, but my mac still has 10.5.8.... any help?? Please...

You must first buy Snow Leopard from Apple: 800-MY-APPLE (in the US)
Make sure your system meets Snow Leopard's requirements:
Mac OS X 10.6 "Snow Leopard" System Requirements
To install Snow Leopard for the first time, you must have a Mac with:
An Intel processor
An internal or external DVD drive, or DVD or CD Sharing
At least 1 GB of RAM (additional RAM is recommended)
A built-in display or a display connected to an Apple-supplied video card supported by your computer
At least 5 GB of disk space available, or 7 GB of disk space if you install the developer tools

Java broken in Firefox after Java for Mac OS X 10.6 Update 3

After having updated my mac this morning with the latest Java for Mac OS X 10.6 Update 3, Java in Firefox is no longer working. When I open a site that contains a java applet (like javatester.org) I get the following output in the Console, and then Firefox hangs.
21.10.10 11:44:15 [0x0-0x33033].org.mozilla.firefox[649] ### MRJPlugin: getPluginBundle() here. ###
21.10.10 11:44:15 [0x0-0x33033].org.mozilla.firefox[649] ### MRJPlugin: CFBundleGetBundleWithIdentifier() succeeded. ###
21.10.10 11:44:15 [0x0-0x33033].org.mozilla.firefox[649] ### MRJPlugin: CFURLGetFSRef() succeeded. ###
Any ideas??

Problem solved!
For some reason I had an additional "Java" Folder (/Library/Java) with a different Java sdk. After removing this folder and (just to be sure) replacing it with a symlink to /System/Library/Java everyting works again.

Mac OS 10.8.5 update trouble

Hi,
I'm new here and I would be grateful to anyone able to help me. Today I have made the Mac OS 10.8.5 update on my 2010 Macbookpro (Apple care ending on November 10). It has downloaded the update from the application center and has started to install it. All went fine. However it has been half an hour now that the screen is blocked at "less than a minute before restart". I have all the right to suspect something is wrong.
So what to do? Wait one or two hours? Restart? I'm not very hot on restarting as it is a Mac OS update.
Of course, I don't have time machine and haven't saved my system (reason why is: never any problem with updates). I'm mac since 1996 and do handle the machines pretty well but this is the first time something si liar happens and I'm not quite sure what to do.
Any advice to give me?
Thanks in advance!

noirfluo wrote:
Today I have made the Mac OS 10.8.5 update on my 2010 Macbookpro (Apple care ending on November 10).
AppleCare: 1-800-275-2273
Call AppleCare. That is the best suggestion I can make.
Best.

Can't print wirelessly since Java for Mac OS X 10.5 Update 4

I have an HP Officejet J4680 All-in-One, and have been printing wirelessly from my Macintosh (OS 10.5.7) since I purchased the printer in December 2008. However, after I installed the Java for Mac OS X 10.5 Update 4, I suddenly lost the ability to print wirelessly. I've spent hours on my own and on the phone with HP trying to figure this out, with no success. When I uninstall and reinstall the printer, I can get to the point in the HP Setup Assistant in which the network configuration has been successfully downloaded to the printer (I see an IP address, Subnet Mask, etc.), but then I get an error message of "Device Not Reachable . . . please make sure that your Mac has access to the network and retry." My Mac does have access to the network because I can get on the internet wirelessly.
I've tried entering the IP address manually, etc.--but nothing has worked. It's as if the printer is on the network, and the computer is on the same network, but they somehow can't talk to each other. Anyone else notice this problem, and how do I solve it?? Thanks in advance for your time!

Hello Laura C. I haven't noticed any problems with my wireless connections to my Canon printers, at home or at work, and I have the Update 4 installed. I also cannot think how this update would have impacted your ability to connect to the printer, except maybe due to a reliance of the HP software using Java to operate. But this should not have stopped your existing connection from working, only a new connection...
Apologies in advance if you have already been through the following, but if you were successful in entering an IP address manually, I would then check that you can get a response from the printer. The best tool to use is Ping. Open Applications > Utilities > Network Utility. Here you will see the Ping tab, as well as several other IP tools.
Before you select Ping, select Info (it probably has defaulted to this). This pane shows you the current IP address settings for your Mac. Since you are using wireless, change the drop menu from en0 (which is Ethernet) to en1 (wireless). This will show your current IP address set in the Mac. Make a note of this.
Now select the Ping tab and enter the IP address of the HP. Change the number of pings to 4 and press the Ping button. If the addresses are correct and the network infrastructure working you should get a response. If you get something like " 4 packets transmitted, 0 packets received, 100% packet loss", then that would explain the unreachable message.
The biggest cause of this symptom is subnetting. To explain further, an IP address consists of two parts, the subnet and network address. The subnet is determined by the subnet mask. If you have a subnet mask of 255.255.255.0, the your subnet is the first three sets of numbers in your IP address and the network address is the last number. For example, an IP address of 10.0.1.10 and subnet mask of 255.255.255.0 has a subnet of 10.0.1 and a network address of 10. For devices to communicate on a local network, they typically need to have the same subnet and a different network address. Can you confirm the subnets for the Mac and printer are the same and the network addresses are different.
If you get responses to the Pings, which indicates the IP addressing is okay, the other services like firewalls can stop some printer utilities from working correctly. Have you checked your System Preferences > Security > Firewall setting is set to allow all incoming connections?
HTH
Pahu

HT1338 The Mac App Store shows an update available for iMovie but when I click "update" it gives me this message, "The product distribution file could not be verified. It may be damaged or was not signed." What can I do to update this program?

The Mac App Store shows an update available for iMovie but when I click "update" it gives me this message, "The product distribution file could not be verified. It may be damaged or was not signed." What can I do to update this program?

http://www.apple.com/support/mac/app-store/contact.html?form=account

Can't install Java for Mac OS X 10.6 Update 10

Hello everyone
I've been trying to install Java for Mac OS X 10.6 Update 10 and printer for ages
What seems to be the problem?
I have an iMac 11,3
Also,when I start my computer I have to wait for the bar to load which didn't use to appear some months before,is it something to worry too?
Thank you for any answer you might have

Forthnet.192.168.1.254 router,ethernet connected
There is no apple store where I live that's a big problem...
Should I install Mountain lion or it's not preferable for my Mac?
Also I get this note no mountable file system whenever I try to install the updates,literally I can't install any update :/

Can't type in search box in mac app store or click updates etc.

i can't type anything in the search box in the mac app store or click updates , purchases, featured,top charts, categories!can't access anything to tool bar! anyone else haveing this problem? only the back and forward and close buttons work! also can i can click and open anything else in the store .version 1.1.2

I turn my imac off every night the reboot solved the problem! Thanks

Stuck with Apple Mac OSX 1.7.2 update!

My MacBook Pro Early 2011 is stuck on the Mac OSX 1.7.2 update.
I ordered Lion OSX from App Store about 2/3 months ago.
It says:
Software Update
Installing 3 items
Progress Bar
This may take a few minutes; do not shut down your computer.
And it has been going about 45min. on the same screen.
And i don't have a Time Machine recovery and don't want to lose my data.
PLEASE HELP!!!

I have solved my problem!
I just shut it down with the power button.
Waited 10 minutes (i kept trying before but did not start up).
I started it then it restarted about 4 times then it started up with all my data.

Installing "Java for Mac OS X 10.5 Update 6" (1.0) causing problems

Hi,
I installed the "Java for Mac OS X 10.5 Update 6" (1.0)" yesterday evening and it caused problems:
- network
- date/time screwed up
- Time Machine crashed
My environment is a MacBook Pro, running 10.5.8, all latest patches applied. During the install all other applications were closed (my once in three months cleanup of the desktop , Time Machine was not running although it might have kicked in during the download, I left it alone for install and the necessary reboot. I didn't hook it up to the power, had 82% battery left, afterwards (after all repairs) still 76%, so my guess is that is not the root cause, although I did get the power source warning and waved it away during the installs.
Looking back into the logfiles and using some gut-feeling I do think somehow the date/time seeting was screwed up and caused all other problems. The date was reset to the famous Unix starttime, Jan 1, 1970. At first I didn't notice, only after my network (Airport Extreme based) asked me WPA password and then complained about the date/time I noticed something weird.
After resetting date/time, verifying the disk for problems (none found), re-entering the WPA password, network ran again, had to re-connect with the Time Capsule and check the sparse backup-volume there before I got everything up-and-running again.
Not a very big deal, but annoying, and certainly something wrong in the update here.
Anyone any explains ?
Regards,
Wim.

Sorry if I missed it...have you scoured logs for anything that might shed light on success/fail during the install?

Mac OS X 10.6 Updates

Similar Messages

Maybe you are looking for