Mac OS X 10.8.3: Joining an 802.1X network at Mac OS X login

Hi,
is there any possibility of joining an 802.1x network at Login in OS X 10.8.3 ?
I've found this Support-Article http://support.apple.com/kb/ht2717
Unfortunately this solution don't work for OS X 10.8.3.
Cheers,
ToMMeK

Give this a shot.
http://revolutionwifi.blogspot.com/2012/02/mac-os-x-lion-creating-wi-fi-8021x.ht ml
Make sure you check the comments at the bottom for a "login window" connection.

Similar Messages

  • Joining my Office Wireless Network - Please Help!

    Hi there,
    hope someone can help. I'm trying to connect to my office wireless network and although airport is picking up the network name, when it asks for a password and I enter this in - 'there was an error joining the ...network' message appears.
    The password entered is correct since this was obtained directly from our IT Manager. He has no real experience of MacOSX but seems to think we need to further tweak the wireless network advanced settings for this connection - things like network authentication, key index, etc.
    Where can I acess these more advances options on OSX??
    Any other feedback for this is greatly appreciated.
    Thanks
    Paulo
    1.33GHz Powerbook G4   Mac OS X (10.4.2)  

    Hi Tim,
    Its protected with a WEP Password which I've already
    tried but just keep getting the error message.
    Aha, WEP passwords can be troublesome on some Wireless routers.
    We've had another go at this today but still no joy.
    My airport card seems to be detecting the network
    fine but connecting to it with the password is a
    stalling point at the moment! I've also tried using
    the password with the other types of password
    encryption from the drop down menu with no luck.
    If entering a WEP key you need in somecase to put a $ infront of the passcode.
    Are you enterinig a full hexidecimal key?
    Also your IT manager shoud be aware that WEP is relatively straightforward to crack even by amateur crackers. WPA or WPA2 is the only wireless protection that you should consider.

  • Can my older Airport Express 802.11g join an existing wireless network

    I have a Airport Express 802.11g firmware version 6.3 . Using the most recent Airport Express Utility I can set it up as a base station on its own independent network but I cannot join it to my existing home wireless network. As I go through the wizard (or manual setup) It just does not detect/display any existing wireless networks. I have plenty of mobile devices in the  house that can see the wireless network...and next doors network.
    So, it begs the question ... is an 802.11g unit actually capable of joining another network or is this capability available on later models only. A search of apple support and the wider internet for "Airport Express 802.11g capabilities" yeilds a blizzard or useless info.
    Thank you

    Sorry, I cannot help on Windows since I do not have a Windows 7 machine here to test. I have used XP in the past and AirPort Utility appears to be virtually the same in Windows as a Mac. I assume that this is the case for AirPort Utility 5.6.1, and it should be able to configure the Express.
    The older Express will join most wireless networks if the following conditions are met:
    1) The Express is functioning correctly.
    2)  The wireless network name is 12 characters or less and it contains only normal letters and numbers. Avoiding blank spaces in the wireless network name will help improve the chances of the Express joining the network as well.
    3)  The wireless router is broadcasting a compatible signal that would allow the "g" Express to connect. If your network is broadcasting a wireless "n only" signal, the Express cannot connect to this network.
    4)  The wireless security on the network is set to a WPA compatible setting. That is because the older Express has difficulty joining 3rd party wireless networks using WPA2 Personal or WPA2-PSK-AES encryption. In other words, if your network is now using WPA2 Personal or WPA2-PSK-AES settings, the "g" Express will probably not be able to join the network.
    5)  If you are using MAC Address Filtering on your network, the MAC address of the Express will need to be included in your settings.
    6)  The wireless network password uses the same guidelines that appear in 2) above
    The items noted above will provide the Express with the best chance of joining your network.  Plan to use the Manual Setup option in AirPort Utility and be prepared to use the Option or Alt keys on the PC if needed.
    If you are looking for a guarantee of success in advance for this task, I cannot provide that and you should wait for another user to post who might be able to meet your requirements in that regard.

  • Joining an existing wireless network with airport express

    Ok, am almost to the point of throwing my AX across the room
    AM trying to join an existing wireless network, its from a 2Wire gateway
    one of three things happen
    it won't find the AX in the first place
    it recognizes it, but i can't connect to it
    it goes through the configuration and when it restarts the AX, it can't reconnect to either the router or the AX and it fails. if this happens i can't reconnect to my wireless network without deleting it and re-adding.
    it doesn't show up in my available wireless networks at all
    protected via WEP, and i have tried using all the security options.

    The directions are in KB 302153, AirPort Express: How to join an existing wireless network in client mode.
    Are you using MAC address access control in addition to WEP?
    Turn off WEP and see if that makes a difference?
    One of the problems with WEP is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP.
    In order to make things easier for people, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling people to use simple memorable WEP password rather than lengthy HEX keys.
    The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a Netgear client and vice versa.
    One thing is a 13 character 128 bit WEP password will be hashed by all vendors in the same way (if you use 40bit WEP then a 5 character password is required).
    Though sometimes not even that works and the HEX key must be used regardless.
    Choosing a password for networks that use Wired Equivalent Privacy (WEP)
    http://docs.info.apple.com/article.html?artnum=108058
    WEP is now considered not to be secure and therefore it is advised you use WPA.
    "WPA Personal" on the Mac corresponds to plain WPA, with a pre-shared key (PSK) and TKIP encryption, on non-Apple wireless routers. The same alphanumeric password should work on both.
    iFelix

  • Help me clarify: Difference between Joining and Extending Wireless Network

    I've eventually figured out how to get my AirPort Express to allow my Mac Pro access to the internet Via Ethernet cable by joining an existing wireless network. What's the difference between that and extending it? By extending it I loose my ability to use the ethernet to connect to internet on my Mac Pro. Odd thing is though when I initially used AirPort Utility to set up my AirPort Express, I went through all the options to get it configured to access my existing network and I checked option to allow internet access through ethernet. All is well, but then I still don't have access to the internet through the ethernet and I noticed that the setting is on Extended. Just curious why it would give me the option to use the ethernet, set it on extended and not even work.

    I've eventually figured out how to get my AirPort Express to allow my Mac Pro access to the internet Via Ethernet cable by joining an existing wireless network. What's the difference between that and extending it?
    When "joining a network," the AirPort Express Base Station (AX) acts just like any other wireless client (laptop, desktop, printer, etc.) You would want to configure the AX to join a network when you only want to use it to share a USB printer and/or stream iTunes.
    When "extending a network," the AX can perform as either a main, relay, or remote base station in a Wireless Distribution System (WDS). A WDS is primarily used to extend a network wirelessly.
    By extending it I loose my ability to use the ethernet to connect to internet on my Mac Pro.
    If the AX is configured as either a relay/remote base station in a WDS, you actually can use it's Ethernet port for Internet access. Of course, this relay/remote must be connected to a main base station, that itself, has Internet access.

  • Cannot join time capsule airport network from iPad 2 or iPhone 4

    I have recently setup a new time capsule airport base station network with my new iMac (27-inch, late 2012) running OSX 10.8.2. Wi-Fe network works fine for internet access and printing from the iMac but I cannot join the wi-fi network from our iPad 2 or iphones. The network is seen in the wi-fi setup when wi-fi is turned on with the ipad and phone but does not establish a connection. An IP address and subnet mask show under the DHCP settings but the connection is not established. (Continuous revolving wheel).
    Any help would be appreciated.

    The airport utility in Mountain Lion is a toyland version.. see bottom of post for installing v5.6 which improves the ability to actually make the TC do what you want.
    For whatever reason the iphone/ipad seem sensitive to wireless channels.. which Apple auto rotate.. I think it is bluetooth connection stuff.
    Anyhow jump in and set the following.
    Wireless should have strictly SMB names.. short no spaces, pure alphanumeric.
    Use WPA2 Personal security.
    Lock the wireless channel for 2.4ghz.. try in the following order.. 11, 6, 1 (those are the only non-overlapping channels) you can try in turn for which is best but if 11 works well stick to it.. Outside USA you can also use 13.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

  • I can not join my Apple extreme with the Apple express. I shows a conflict in the network! I've tried everything. How can they join on the same network?

    I can not join my Apple extreme with the Apple express. I shows a conflict in the network! I've tried everything. How can they join on the same network?

    It says that my DHCP has to be changed! How? to what?
    It is 802.11g.express. but is set to default by the computer (Macbook Air).
    The other is 802.11n. (express)
    Extreme is 802.11.g. Is the Main Airport.
    It is on ethernet & wep 128 security.

  • My iPhone 4s cannot join a public unsecured network but my iPad and macbook can.  I have reset the network settings twice.  Both times it worked, but only for a few minutes.  What can I do?

    My iphone 4s cannot join a public unsecured network, but my ipad and macbook can with no problems.  I have reset the network settings on the iphone twice.  Both times that fixed the problem but only for a few minutes, then I get the "cannot join network" message again.  Please help!  What can I do?

    Anyone have any ideas or information to help with this?  Any help and consideration is MUCH appreciated.

  • Error joining the selected airport network?

    I'm trying to connect to my linksys wireless using WPA with a powerbook but no luck. My password which I know is correct (it's working on another G4 and my wife's Gateway. I get the following message when selected my network. "There was an error joining the selected airport network". I can connect via a neighbor's unprotected network, so airport is working. Other times I've tried it says password is incorrect.

    Wi-Fi Protected Access networks normally require a plain-text password or passphrase. But in rare cases you may have to enter a string of 64 delightful hexadecimal characters.
    The HEX password is derived from the plaintext password therefore you shouldn't need to create anything new. Check the linksys router for the HEX version of your plaintext password.
    The AirPort interface doesn't welcome this wonderful practice by default (imagine that), but it's buried in there for when you need it. Just hold down the Option key while choosing your network from the AirPort menu, then you'll be set to enter all 64 of those easy-to-remember characters.
    iFelix

  • I am unable to join my existing wireless network with new AirPort Express

    I am unable to join my existing wireless network with new AirPort Express.
    I am using a DLink DI-524 Router, Windows 7 (64), and the AirPort Express.
    AirPort Utility will not recognize the AEX wirelessly, it will only recognize it when it is connected by Ethernet. I can then configure the AEX and verify that the settings stick once disconnected and then reconnected. However, even after that, it will not recognize the AEX once disconnected from the Ethernet cable.
    I followed the suggestions of several other threads on these forums. But I am unable to get the AEX to work.
    Any suggestions? Thanks in advance.

    Welcome to the discussion area!
    It's almost always a security setting that causes problems when the Airport Express (AX) tries to join a third party wireless network. The AX usually does not "join" correctly and that's why you can't see it on your wireless network using AirPort Utility.
    Using an ethernet cable is still the more reliable way to configure and adjust the AX, but if you are want to try to configure it using wireless, you must return the AX back to factory defaults as follows:
    Power down the AX
    Hold in the reset button +and keep holding it in+ as you plug the AX back in to power
    Release the reset button after 10 seconds
    When it is set to factory defaults, the AX broadcasts a wireless signal with a network name like "apple network xxxxxx" where the "x's" are either letters or numbers. You must look for this network by clicking on the fan shaped Airport icon at the top of the screen. If you don't see this network, then click Join Other Network to search that way. Unless you connect to this network, you will not be able to configure the AX using wireless.
    Do you know the exact security type that your D-Link router is using? That is the key element in the process.
    Open AirPort utility, click Manual Setup
    Click the Base Station tab to establish a name for the AX, device password and adjust time zone settings
    Click the Wireless tab
    Wireless Mode....Join a wireless network
    Wireless Network Name...must exactly match your D-Link wireless network name
    Enable ethernet clients if you want the port to be active (your D-Link must be compatible with ProxySTA for this to work)
    Wireless Security...exact setting of the D-Link network. WEP security causes a lot of issues. Try to use WPA/WPA2 Personal, which is far more secure.
    Wireless Password...must match the D-Link network
    Click the Music icon to enable AirTunes
    Click Update to save settings
    Any luck?

  • I've tried everything and still am unable to join my own wifi network from my iPhone 4s

    I have an AirPort Extreme running the latest software. I've tried everything and still am unable to join my own wifi network from my iPhone 4s, iPhone 3Gs, iPhone 3G, my girlfriend's iPhone 4. The only devices that will connect to the network are our MacBook Pros and iPads, (1 and 2). I have reset the airport to default settings, I've restored my iPhone, I've even disabled the password. I am still unable to join my open airport extreme wifi network. PLEASE HELP!

    Saying you tried everything isn't helpful. Perhaps describing in detail what you've done would allow people to better assist you.
    If you're ever experiencing strange problems connecting to any wifi point you can always try resetting your network settings on your iPhone itself. This solves the majority of wifi problems.
    To do this go to Settings > General > Reset > Reset Network Settings. This will clear all of your saved wifi hotspots and passwords, and hopefully solve your issue.
    Please try this and respond with your results.

  • I am unable to join my own wifi network with new iphone 5

    I am unable to join my own wifi network with new iphone 5.  It has the latest software downloaded too.  Keeps saying unable to join network after I type in the password.  All my other devices are able to join but just not the iphone.  I've called Verizon and my internet provider and they have been unable to help.  I had no problems with my iphone 4 with this very same issue.  Please help or I'll be forced to return this phone.  I have 13 days left.

    Try power-cycling your router (unplug for 15 seconds, then plug back in), then on your phone go to Settings>General>Reset and tap Reset Network Settings, and try joining your network again.  Note: resetting network settings will erase passwords for previously joined networks on your phone.

  • HT1695 I am trying to set up my new iPad (1st time owner) and it tells me it is unable to join my home wifi network. What do I do now?

    I am trying to set up my new iPad (1st time owner) and it tells me it is unable to join my home wifi network. What do I do now? This is the only wifi network I have...

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT3867 I'm trying to set up a new iPad air.  Why is it unable to join my wi-fi network, even with correct password?

    Why am I unable to join my wi-fi network with new iPad air using  correct password?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HAs anybody noticed how the MAc Book Pro Login button function has changed with OSX 10.9?

    Has anybody noticed how the Mac Book Pro login button function has changed with OSX 10.9?

    No one in this forum will...  this is the Mac Pro forum

Maybe you are looking for