Mac OS X 10.9.3 does not detect the presence of Canon MX395 printer. Help?

Hi,
My printer/scanner was working fine before I upgraded to Mac OS X Mavericks. I now run OS X 10.9.3, the printer is Canon MX395.
Basically mr problem is that the printer is simply not detected. I turn it on and plug in the USB cable but nothing happens. I cannot view the printer in the list of printers in System Preferences > Printers & Scanners, nor can view it if I click Add. I have already spent 2 sessions of 3-4 hours following all steps provided in Apple Support pages about setting up printers and troubleshooting with printers (including reset printing system and deleting all canon related files/applications and installing everything again, meaning both drivers from canon and canon drivers from Apple) and I am sure that the printer is working and well connected.
Need help please!
Thanks,
Antoine

Hi all,
Update on my situation, my problem is solved.
I disinstalled and reinstalled many times everything to come to the conclusion that, in my case, installing the driver from Canon PROHIBITS the printer/scanner from working. Indeed, everything is now running fine with Apple driver for Canon printers (Apple Canon Printer Driver 3.0 for mac OS). BUT, if Canon driver is at the same time installed, computer is not being recognized. Having solely Canon driver without Apple driver also results in the printer not being recognized.
This may sound weird (at least to me) but that is how it seems to be. Hope this can help anyone.
Final solution:
1) disinstall everything printer related (printers, drivers, reset printing system)
> In my case, I did not reinstall Mavericks nor reset the whole OS
2) install the Apple driver (and ignore the one from Canon)
3) connect the printer, turn it on, should be working
Regards,
Antoine

Similar Messages

Mac OS X Server v10.7 does not show the ethernet link aggregated interface I created in Server Hardware Network Dialogue window. Are link aggregated ethernet connections not supported in Lion Server?

Mac OS X Server v10.7 does not show the ethernet link aggregated interface i created. Does Lion server support ethernet link aggregated interfaces?

Thanks for responding Cold--
Hardware: Mac Pro 3.0 GHZ quad core xeon
I read the link but it still does not explain why the aggregated dual ethernet interface does not show up in the Network tab of the hardware section Lion Server. I was able to see it on the network and looks to be using a single static IP that I assigned. My concern was that is this supported and will it allow for failover and double performance of the single network interface.
Any thoughts?
Thanks again!

When i connect my philips 170c monitor to my macbook pro 13" early 2011, it does not detect the second monitor?

help! i've googled around, but none seems to solve my problem
my macbook pro is early 2011, 13", running lion.
the philips monitor is vga only, so i have a mini display port to vga adaptor and connecting it to the vga.
the screen on my mbp does turn blue, but no input is detected on the external monitor.
any advice?

If it does not detect the display automatically, try going to system preferences>displays, click detect displays.

Captivate 3 does not detect the micro

Dear Users!
I have a lot of problems, using captivate 3 on my vista
installation. actually, the program does not detect the microphone.
i am using this micro in other applications without any problems. i
read this problem also exist in older versions of captivate. i am
using realtech audio hardware. i found a patch for captivate 2 that
does not work on captivate 3, but i found no pathch for captivate
3.
greetings from germany
Rene Rose

Hi Rene
It should be logical to assume that any patch that corrected
issues with version 2 would be automatically incorporated in
Captivate 3.
To my knowledge, your situation is one I've not seen or heard
of in Captivate 3. So I suspect possibly a mix of hardware that we
haven't seen before.
I would highly suggest you report this to Adobe as a
potential bug. Please provide them as much detail as you can. You
do this using the Wish Form.
Click
here to view the WishForm/Bug Reporting Form
Cheers... Rick

How do I get the none button to pop up so u don't have to have a credit card for apps? I owe nothing for apps from Apple, NOTHING!? And it still does not show the option "none". If it helps the card I have is a debit.

How do I get the none button to pop up so u don't have to have a credit card for apps? I owe nothing for apps from Apple, NOTHING!? And it still does not show the option "none". If it helps the card I have is a debit.

I'm happy you figured it out and just try to keep in mind that not everyone you talk to at support will give the same advice or have the same knowledge. Just like those who contribute to these forums. Sometimes Google is your best friend.
I agree that Apple could probably make it easier, but as of yet prefer security over freedom. (sound famaliar?)
Anyway, if you choose to do so, you can leave feedback here:
Apple.com Feedback
Apple Support Feedback
Developer Feedback
Product Feedback
QuickTime Feedback
Search Feedback

Windows support software not detected the presence of Windows support software

I have already downloaded the Windows support software but why the Mac warning that it could not detecte the presence of Windows support software (I use USB for install)

Same.

HT4157 My ipad suddenly does not detect the cellular settings.

I inserted a new micro sim and it does not detect and gives "no service"

Hi misteroyster,
Thanks for visiting Apple Support Communities.
If you see a message that says "No SIM" or "Invalid SIM" on your iPad Air, I recommend the troubleshooting steps in the article below. It refers to the iPhone, but the steps apply to the iPad as well.
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/ts4148
Best Regards,
Jeremy

Laptop does not detect the new HDD

Good afternoon ladies and gentlemen Gameday! I need help.
On my laptop broke down the hard drive. According to reports, a lot of bad sectors, SMART. Decided to put a new HDD. Laptop does not see the new hard drive. In the BOOT MENU new hard drive is not detected.
Old hard drive while still runs in the BOOT menu displays all 3 sections. On the new disk interface is similar to the interface connection on the old disk.
laptop model: 15-e 051 sr.
OS: Win 8
manufacturer of the old hard drive : Hitachi
new hard drive: seagate.
New hard drive on another system checked for operability.
Also, the laptop refused to work with other hard drives: Samsung, Hitachi.
I am sorry for your Books English. For transfers using Google translator.
I look forward to qualified support, despite the language barrier.
Sincerely Sqwosh.

Hi @sqwosh ,
Thank you for your query, I will do my utmost to assist you.
First I would like to let you know that the broken English is not a problem. I understand that Google translation can be a a little rough in the translations. We will work together and I am sure we will do fine!
I grasp that you are trying to replace the hard drive but it is not being recognized in the bios.
Here is a link to the HP Pavilion 15 Notebook PC Maintenance and Service Guide. please note page 57 for a list of supported hard drives. It will also provide information on removal and replacement of the hard drive.
You could also try this.
Once you have the hard installed and connected and you are at the bios screen, you will notice an option to restore defaults along the bottom. ( I believe it is F5) . This will cause it to scan for the hardware and hopefully find your new hard drive.
Please do not hesitate to respond if you require further assistance and good luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

TS1363 iTunes does not detect my iPhone, sends error message, please help

iTunes does not detect my iPhone when I plug into ligthening cable- error message 0xE8000084 appears, please help

Hello Brian,
Here is an article that should point you in the direction of a resolution. It has a section about the OXE errors.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
All the best,
Sterling

My Mac Book Pro does not recognize the presence of a DVD or CD

Ever since I upgraded my MacBook Pro, it does not recognize a DVD or CD of any type when I put it in. I have a store bought DVD, the Social Network, which worked fine before upgrading to OSX operating system. Music CD's were okay then, too. Now, neither is even recognized by the player. Thought maybe it needed to be reloaded, but na't figure out how to do that. This is very frustrating, and makes me start to second guess my decision to switch to an Apple product. I've only hd this computer about 18 months, did the upgrade last September (?) and have had difficulties ever since. HELP me please!!!

Use Apple Hardware Test
Open the Help Viewer’s Action pop-up menu (looks like a gear) and choose Print to print these instructions.
Disconnect all external devices except the keyboard, mouse, display, and speakers. If you have an Ethernet cable or external DVD drive, disconnect them.
Restart your computer, holding down the D key while the computer restarts.After your computer restarts, you should see the Apple Hardware Test chooser screen. If you don’t, Apple Hardware Test may not be available on your computer. You may be able to start Apple Hardware Test from the Internet. Reconnect your computer to the network, and then restart your computer while holding down both the Option and D keys.

In Mavericks OS X iMovie does not detect the camera

Hi,
Yesterday I had OS 10.8.7 and then I upgraded to OS Mavericks, and now when I try to import videos from my camcorder (new camcorder just purchased 4 weeks ago) iMovie does not seem to detect it.
But iPhoto does detect it.
The camera is Sony Handycam HDR-cx220
Is there some setting that I need to set? Or am I screwed?
Thanks!
And if all else fails, am I able to go back to the old OS?

For a list of iMovie '11 supported cameras see http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
Can you see the files on your camera in the Finder rather than from iMovie (either directly connected camera or via a memory card)?
If yes your camera is acting as a separate volume and you can copy your clips onto your mac with the Finder then import the files into iMovie. If the format is AVCHD there are some special considerations to take into account.

[SOLVED]mpd does not detect the music directory

I recently installed mpd with the gmpc gui, set my "music_directory" in /etc/mpd.conf to the location of all of my music (which contains lots of other folders and subfolders), but there's no listing of the audio files in the database in gmpc.
Here's the /etc/mpd.conf if that helps:
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "/var/lib/mpd/music"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
playlist_directory "/var/lib/mpd/playlists"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "/var/lib/mpd/mpd.db"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
log_file "/var/log/mpd/mpd.log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
pid_file "/var/run/mpd/mpd.pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
state_file "/var/lib/mpd/mpdstate"
# The location of the sticker database. This is a database which
# manages dynamic information attached to songs.
#sticker_file "~/.mpd/sticker.sql"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
user "mpd"
# This setting specifies the group that MPD will run as. If not specified
# primary group of user specified with "user" setting will be used (if set).
# This is useful if MPD needs to be a member of group such as "audio" to
# have permission to use sound card.
#group "nogroup"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
#bind_to_address "any"
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
#port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
#log_level "default"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#gapless_mp3_playback "yes"
# This setting enables MPD to create playlists in a format usable by other
# music players.
#save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# This setting enables automatic update of MPD's database when files in
# music_directory are changed.
#auto_update "yes"
# Limit the depth of the directories being watched, 0 means only watch
# the music directory itself. There is no limit by default.
#auto_update_depth "3"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Input #######################################################################
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
# An example of an ALSA output:
#audio_output {
# type "alsa"
# name "My ALSA Device"
## device "hw:0,0" # optional
## format "44100:16:2" # optional
## mixer_type "hardware" # optional
## mixer_device "default" # optional
## mixer_control "PCM" # optional
## mixer_index "0" # optional
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## format "44100:16:2" # optional
## mixer_type "hardware" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
## mixer_type "software" # optional
# An example of a recorder output:
#audio_output {
# type "recorder"
# name "My recorder"
# encoder "vorbis" # optional, vorbis or lame
# path "/var/lib/mpd/recorder/mpd.ogg"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# max_clients "0" # optional 0=no limit
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
audio_output {
type "pulse"
name "My Pulse Output"
server "remote_server" # optional
sink "remote_server_sink" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# mixer_type "none" # optional
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#audio_output_format "44100:16:2"
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "off", "album" or "track". See <http://www.replaygain.org>
# for more details. This setting is off by default.
#replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#replaygain_preamp "0"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#audio_buffer_size "2048"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting.
#filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
#id3v1_encoding "ISO-8859-1"
# SIDPlay decoder #############################################################
# songlength_database:
# Location of your songlengths file, as distributed with the HVSC.
# The sidplay plugin checks this for matching MD5 fingerprints.
# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
# default_songlength:
# This is the default playing time in seconds for songs not in the
# songlength database, or in case you're not using a database.
# A value of 0 means play indefinitely.
# filter:
# Turns the SID filter emulation on or off.
#decoder {
# plugin "sidplay"
# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt"
# default_songlength "120"
# filter "true"
Last edited by vlad951 (2011-05-07 09:36:11)

vlad951 wrote:
Thanks, I successfully launched mpd as a user and it detected all of my music. However, if I launch mpd with the mpd.conf that I created in my home directory, it launches, but outputs the following:
[vladislav@vladislav .mpd]$ mpd ~/.mpd/mpd.conf
listen: bind to '0.0.0.0:6600' failed: Address already in use (continuing anyway, because binding to '[::]:6600' succeeded)
Is this normal?
*sigh* i answer this for the 3rd time in a row... this is no error it just says that binding to your ipv6 interface happened before the binding to ipv4.
If you want to use your ipv4 interface hardcode it in mpd.conf
bind_to_address "127.0.0.1"
you can also have several binds:
bind_to_address "127.0.0.1"
bind_to_address "192.168.1.13"
to make it listen on localhost and the external IP of your network card.
If your music is on the same machine as your mpd i recommend to use a unix socket in addition.
bind_to_address "/path/to/some/file/that/does/not/exist/yet"
and make your client connect to that file instead of the IP. Speeds things up a log e.g. in ncmpcpp
and btw: you can save your mpd.conf file as ~/.mpdconf and mpd will automatically use it.
Last edited by Rasi (2011-05-07 08:41:30)

TS2846 after reset settings of 3gs it asking countery and after thatchoose a network but it does not getting the signall in this step.pls help

after reset settings it asking language after country then it does not catching signal & it also not conneted to i tunes. pls help

Resolve iOS update and restore errors - Apple Support

AT200 service station does not detect the serial number

Good morning, I wanted to update my AT200 Android 4 But I do not think works the service station and you do not recognize or model or part number and serial number, there would be some way to insert it or update it, you could do?

Hi
The Image flashing on AT200 series can be done by Toshiba authorized service provider…
You have to contact the guys to perform this job.
As I’m not mistake the Android v4.0.3 could be installed

Pages for iPad (2) does not link with bluetooth with Canon airprint printer

I am using apple Pages appi on iPad2. I cannot get iPad to find Canon PIXMA airprint capable printer to print documents. Any suggestions? Thanks

David.Austin.Allen wrote:
According to the keyboards user guide, the keyboard is discoverable when the indicator light is flashing. Are you trying to pair the two while both are discoverable?
Try resetting the iPad before trying to pair with the BT keyboard. Press and hold simultaneously the Home and Power buttons for 10+ seconds, ignoring the power off slider, until the Apple logo appears.
Dah•veed
I did all of that but not sure that any of it did as much as simply turning off the computer to make sure that the keyboard was not being used by it. I now find that I could have turned off the bluetooth on the computer or made the keyboard 'unselected' by bluetooth to allow the keyboard to be free to be selected and paired by the iPad.
Thanks for you help on this.
Ken

Mac OS X 10.9.3 does not detect the presence of Canon MX395 printer. Help?

Similar Messages

Maybe you are looking for