Mac OS X Boot failure... I cant Repair HDD with OS Disk,Shows Repair Failed. I cant backup my files from HDD. Backup failed. But I need my all datas from HDD. I dont want to format. Cant enter safemode also. anything else..

Mac OS X Boot failure... I cant Repair HDD with OS Disk,Shows Repair Failed. I cant backup my files from HDD. Backup failed. But I need my all datas from HDD. I dont want to format. Cant enter safemode also. anything else..
I installed XP @Bootcamp, I cant access my Mac HDD via XP..
What I do??? Please help me.. please...

You can try DiskWarrior (about $100).
If that doesn't work, and if you have no backups at all, you might need to send your hard drive to Drive Savers or a similar service. It will cost a lot of money to get the data back, I'm sorry to say.

Similar Messages

  • I received a phishing email supposedly from my bank and clicked on url - didn't enter any data though.Bank says to get ipad checked for viruses,but I understood ipad has built in security.I've cleared cookies in safari via settings.  Anything else to do?

    I received a phishing email supposedly from my bank and clicked on url - didn't enter any data though.Bank says to get ipad checked for viruses,but I understood ipad has built in security.I've cleared cookies in safari via settings.  Anything else to do?

    I know this has been solved as you reported, but I think you need to check with your e-mail provider. Did you also get this same e-mail on your computer? If you use the same ID for e-mail on computer and ipad, it should have appeared on both. It's very common spam. Check your computer to see if on it, the e-mail is in spam, or, if you deleted it on your ipad, check your recently deleted e-mails.
    You might want to consider changing your password, though people sending spam, don't need it. My e-mail provider had me change my password, not because I was getting spam, but unknown to me, I was sending it!  (You'll still get some spam, though.) It's when you learn that you're unknowingly sending spam...that you must change your password.
    Hope this helps.
    (Ss I was sending this, I just got an e-mail notification from the Nigerian... it got to my e-mail instead of going to spam.)

  • I tried to update my iPhone 4S but I nowkeep getting an error saying I need to restore my phone before it can be used because it's in recovery mode! But if I restore it I lose all my media and data and I don't want to do that! Is there anything I can do??

    I tried to update my iPhone 4S but I now keep getting an error saying I need to restore my phone before it can be used because it's in recovery mode! But if I restore it I lose all my media and data and I don't want to do that! Is there anything I can do?? Somone please help, i'm freaking out over here!

    Anything that was on the phone is already gone. You have no choice but to restore. If you were backing up and syncing the phone on a regular basis, you should be able to restore your backup with minimal data loss.

  • I upgraded my old mac to snow lepord and now when i try to play music in my i tunes it says "file can not be located" but it still lists all of my music

    I upgraded my old mac to snow lepord and now when i try to play music in my i tunes it says "file can not be located" but it still lists all of my music

    Use Spotlight Search (the magnifying glass on the top right-hand corner of your menu bar) to locate your music files. Then point iTunes to those files.

  • I am running a MAC Yosimite 10.10.1 (latest) and have just updated Lightroom to 5.7 to allow me to manipulate files from my Canon 7D mark 2. When I go from Library to Develop there is no basic adjustments available? Help Please?Ray Wood

    I am running a MAC Yosimite 10.10.1 (latest) and have just updated Lightroom to 5.7 to allow me to manipulate files from my Canon 7D mark 2. When I go from Library to Develop there is no basic adjustments available? I have a histogram but no access to the basic controls as per normal.
    How can I get to these?
    Help Please?
    Ray Wood

    See this:
    Missing Panels/Modules - Lightroom Forums

  • Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

  • "Mac OS X cannot be installed on 'Macintosh HD'. This disk is used for Time Machine backups."

    I am trying to upgrade our MacBook to Snow Leopard, but when prompted to select which hard drive to install on and "Macintosh HD" is selected, the following message generates: "Mac OS X cannot be instaled on  'Macintosh HD'. This disk is used for Time Machine backups."
    I disabled Time Machine switched it "off," put it in the trash can, then "Secure Emptied" the trash can. I also rebooted. Then I connected an external hard drive thinking that might help, but for some reason I still cannot proceed with the Snow Leopard upgrade because "the disk is used for Time Machine backups."
    WHAT is the DEAL!?

    It doesn't sound like an upgrade would work very well anyway. Make sure you have a good backup and repartition the startup volume. Then install Snow Leopard onto the hard drive and migrate your old users and applications.

  • HT201365 installed ios7 set passcode lock now i realise i dont want to have to enter passcode everytime, how do i uninstall passcode, have turned off find my i phone but still asking for code ? iphone4

    Installed ios7 on my iphone 4, i now realise i dont want a passcode lock on haave removed find my iphone but phone is still asking for mypasscode when i swipe to unlock. how do i remove this passcode screen

    Many thanks Ocean20, it has been driving me mad, im a oldie but goodie user and hate it when cant figure problems out, but hey sometimes you need help !!! thanks for prompt reply.

  • Says I need to format disk in drive E: but I dont want to format it!

    I recently needed to get a new hard drive because my Laptop would not start up, and from then when ever I put in a USB or SD card, it says that it needs to be formatted although it works perfectly fine on other computers. Is there anyway I can get it to
    work on my laptop because I really do not want to format it. And it would also say that "the volume does not contain a recognized file system"
    I have used a recovery tool but they don't recovery everything that I need. 

    Hello,
    I'd ask in the Windows forum on Microsoft Community.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book: Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • In the process of installing OS X Maverick on mac mini; got error "Filesystem verify or Repair failed"

    Hi,
    I am in the process of installing Maverick on my Mac Mini.  I got an error: "Filesystem verify or Repair failed".
    Most threads suggest that I either:
    1. restart process,
    2. install disk and try again,
    3. recover disk
    Since I am in the middle of installing, I cannot seem to go back to my working OS to restart the process.  Since Maverick is available in the App Store, i cannot use a disk for it.  That leaves me with recovering the disk.  Can anyone suggest how I can do this without destroying all my files on the computer?
    Thanks,

    Thanks for your advice.
    I do have a backup, but I can't access it right now.  I tried the OS X Recovery, but when I try the "Command-R" option, it just goes right back into the install.  I have used the "Command-R" option before, so I know when and how long to hold it for.  I just couldn't get it to not enter the install.  I did manage to at one point get a prompt where it asked me if I wanted to install from Macintosh HD (main partition) or Backup (secondary partition), but I chose Macintosh HD, and it went back into the install.  I couldn't get that option again for whatever reason.
    Is there a way I can just start from scratch?  Both Snow Leopard and Mavericks are online only.  Is there a way to pause the install, connect to the internet and install a brand new (wipe out all files - I can always use by backup to restore my important files later) copy of the OS?
    Thanks,

  • I want to upgrade iMac to Snow Leopard, can I use the (DVD-Mac OS X 10.6.3) that I got with the 15" MacBook Pro that totally died, and upgrade iMac from that DVD

    I want to upgrade my iMac to Snow Leopard, can I use the (DVD-Mac OS X 10.6.3) that I got with my purchase of the 15" MacBook Pro that totally died, and upgrade the iMac from that DVD that came with the laptop ?   Thanks

    No, that 10.6.3 DVD is system specific to the MacBook Pro.
    You need a Snow Leopard Upgrade > Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)
    or if a MobileMe users > Apple throws MobileMe users a free version of Snow Leopard

  • Mac won't boot up..get gray screen with a folder and ? mark what do i do?

    my mac pro won't boot up..get gray screen with a folder and ? mark on the folder..help

    Hi,
    Rather than write up what I did, here is a link to an Apple support document with the instructions to follow.
    I hope this is helpful.  Good luck.
    http://support.apple.com/kb/ts1440

  • I created a New Apple Id, i verified it using mail but it is not yet Reviewed, and now i dont want want the apple id so how can i delete it??

    My Apple id is not being reviewed because of the Payment option which i dont want..
    And that too i din create the apple id using itunes... i did it using a Browser..
    And that is the reason why i want to delete the account.. Any Idea how u can do it??

    It doesn't matter how you made the Apple ID, they are all the same, they can all be used for the same thing. You cannot delete an Apple ID, you can only ignor it and not use it. However, you cannot use the email address that you used to create the Apple ID for any other Apple ID.

  • Sometimes I just want to close ONLY one window, but Firefox is closing ALL TABS, and I don't want this!

    I sometimes will open several windows, especially from my Comcast mailbox. When I am through with that window, I will close it, but leave the other ones open. FIrefox won't do this any more, When I close 1 window, Firefox send me a message stating that it is CLOSING ALL TABS. I DONT WANT TO CLOSE all of them, I just want to close the window I am closing!. This is very annoying, because I have to re-log back into everything, because FIrefox is "CLOSING ALL TABS", and all I want to to close ONE window...I am about ready to chuck this browser....I tried to find an answer to this in tools, but was unable to do so. Please help me with this

    Use CTRL+W - to close the surrent tab.
    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • My iphone was stolen and i dont have find my iphone but i need to erase data

    My iphone was stolen and I need to erase all data on my iphone but I cant because i did not enable "find my iphone". Is there another way?

    Unfortunately, there isn't. 

Maybe you are looking for

  • ASA 5505 Site to Site and Web VPN

    Hello all, I need to add a site to site tunnel from a an ASA 5505 (ver 8.05) to a Sonic wall appliance. The problem is, the ASA already has remote access VPN and anyconnect VPN configured. I'm not sure if its possible to add another secured tunnel to

  • Link button not working in matrix

    Hai To All,           I created one form with only one matrix. On that i have 5 columns. In first column i have linkbutton link to user defined screen. What its not working. My code is here If pVal.ItemUID = "matrix" And pVal.ColUID = "Docno" Then   

  • Bridge cannot build criteria, goes on and on and then tells me to clear cache, which I've done, but it still cannot open. I can see everything in the Mac Finder no problem. What to do?

    I recently moved all of my images to a Mac from a Dell. Everything was perfect, but a few weeks ago I started getting an error message in Bridge that it could not read (not sure of this) the criteria and that I should go into preferences and clear th

  • Add photos over existing audio.

    I need to replace some video with still images, while keeping the audio intact. I know it can be done in iMovie HD (06), but I've imported to 08 and no longer have the source tape. Thank you for any help!

  • Travel Form Error

    Hi All, Upon clicking on the Results button in PR05 transaction to see the result in PDF form(PTRV_Expense_Form), an error crops up. u201CError while initiating the travel Formu201D. Any clues on the reason for this error. Does it have to do somethin