Mac OS X Digital Video Camcorder

My husband just surprised me with a digital camcorder to use on Christmas Day and I have discovered that it is not Mac compatible. It is a Canon FS100 Kit, but is for a PC. I looked on the Canon website and could not find a video camera compatible with my Mac. Can someone please give me some suggestions on a type or brand name that will work?
A couple of years ago I asked for info on a digital camera and got excellent advice on what camera to buy.

Sheila Kobs wrote:
John,
Where do I find the "Apple Supported List"?
Hi Sheila
The supported list is right there in my reply - the line that says iMovie '08 Camcorder Support. Click on it and you will be magically transported to the correct page. As the name implies it pertains to iMovie '08 which I'm pretty sure is your version. However, the Canon FS100 is one of the cameras that's supposed to work with it.
Researching compatibility issues can be a pain, but you've come to the right place. You'll get a lot more responses if you post your question in a forum specifically for iMovie. Click on this for the iMovie '08 forum: iMovie '08
In that forum you'll find this lengthy discussion about the Canon FS100:
http://discussions.apple.com/thread.jspa?threadID=1508690&tstart=0
Apparently there have been some compatibility challenges with that camera, but some folks have reported success. It really should be as easy as "plugging it in" so if yours isn't working that way, go to the iMovie forums and ask.

Similar Messages

  • Which Digital video camcorder?

    Hello,
    I just purchased a Mac Air with Final Cut Express on it. I am in the market for a digital video camcorder (I have an old sony, 10 yrs ago that is broken). can anyone give any experience with the new digital video camcorders and which kinds may work best with my Mac? I really like to the hard drive models, high definition, will the ACVHD codec cause a problem? I don't think the Air has a firewire but it does have a USB port.
    thanks for any suggestions.
    bugsycat

    Thank you for your reply. I got the Mac Air for portability at work and I will be using it while I travel this summer. I also have an iMac and a 1/2 TB Time Capsule for extra storage (I work with digital image data alot, but not yet video data). Can Final Cut be used on the iMac? I think I can hook up a camcorder via firewire to the Time Capsule and use my iMac for processing. I realize the AVCHD codec uses a sequence of one frame followed by 4 frames that record changes from the main frame. The AIC expands the data I see, it must fill in the data on the missing frames. Does Final Cut give easier options for editing the expanded data? If so then I guess hard disk models that use AVCHD would be OK.
    I do not want tapes (there are start and stop issues with more than one user, also storage issues) and DVDs don't seem to store much. That is why I was looking at the hard disk models, although I guess the flash drive models might work as well from that aspect. I do not know what format or codec the flash drive models typically use. The Canon HG10 or Canon HF100 are what has been recommended to me by friends.

  • Where has it all gone? Canon MV6i(mc) Digital Video Camcorder (PAL)

    Hi all,
    I have a Canon MV6i Digital Video Camcorder, that uses MiniDV, and not too long ago changed from a PowerBook to a MacBook Pro. My new Mac does not seem to want to recognise the Camera, I have attempted using both USB and FireWire, and have also recently upgraded iLife, hoping that it will make a difference.
    Unfortunately it still seems that the MacBook Pro does NOT recognise the Camcorder. Am I doing something wrong? Am I missing something?
    How can I get it to work? I have also thought of getting a new Camcorder, but then why, when this one should work, or not?
    How can I make it work?
    Help me someone PLS, as I do have a LOT of "sentimental Video" that I want to use.
    Thank you,
    DC

    Sorry, as important as this issue is to all of us who use Firefox, this is a Firefox support forum - not an appropriate place to start a discussion like this.
    I'm locking this thread for two other reasons though. <br />
    # An appropriate hyperlink to the original article wasn't provided.
    # Copy and paste from the original article without quotation marks or proper attribution.

  • Can iMovie works with Canon HF20 digital video camcorder?

    Hi there,
    I was wondering if anyone out there have this digital video camcorder (Canon HF20) because I'm looking into buying one. I would like to know if this camcorder is user friendly with Macbook (2.2 ghz). Thanks.

    I am not an expert but I believe it does. I have the same camcorder and MacBook Pro. The laptop recognizes the camera and it is a straight forward import from camera to iMovie.

  • Best Plug and Play Digital Video Camcorder

    I am looking to buy a flash memory video camcorder. What are some of the easiest to use plug and play models that people are using? I don't want to spend a lot of money, looking to stay under $550.
    Thanks

    After asking the same question about 50 times I settled for the Panasonic TM55K. Recommendation from a couple of different camera techs. I will receive on Friday. $428 from B&H photo.

  • Using My Digital Video Camcorder and Quicktime...any Help???

    I recently purchased a digital camcorder that I am trying to get to work with my Mac. I also just purchased Quicktime 7.0.4 PRO which I am hoping can convert the files from my camcorder to a viewable Mac format.
    I am using OSX 10.4.6. The camera is a DXG-305 and the software written for the camera is for PC only. When I connect the camera to my Mac I get a folder to pop up of whatever I have captured but it shows files that are in a .ASF format. When I click on the file to try to open it , it wants to open in Microsoft Windows. When I go into Quicktime PRO and under File try to "Open File"- the file does not even become highlighted or selectable? Is this a file that Quicktime PRO is not able to open? If not, is there anyway that I can convert this file to one that I can use on my Mac? Is it possible to upload from my camcorder via the included USB cable and convert directly through Quicktime PRO? I am looking for ANY solution to this dilemma? Thank you-
    John

    Is this a file that Quicktime PRO is not able to open?
    Yes. Your camera's native video format is MPEG-4 and appears to possibly be "muxed" with MP3 audio.
    If not, is there anyway that I can convert this file to one that I can use on my Mac?
    Try installing the free Flip4Mac component. Then try playing the .asf file in the QT Player.
    Is it possible to upload from my camcorder via the included USB cable and convert directly through Quicktime PRO?
    If your file plays using the Flip4Mac player component, you may then wish to consider purchasing full conversion codec which will allow you to export your DXG-305V files to any frame-to-frame synchronized QT compatible format in QTPro.
    ADDED: Sorry about the duplication, too slow with my response.

  • Camileo Pro Digital Video Camcorder

    Hi, first post - so
    I have lost the charger for my camileo camcorder - can I get a replacement and if so is it a generic one/USB what is the power details details
    Hope someone can help
    Thanks
    f_b

    Have you checked the Toshiba website? Maybe they can supply a replacement Charger / AC Adapter.
    Or search google for "Camileo Pro Camcorder AC Adapter"

  • Digital Video Recorder with Firewire 400 and new iMac

    I just got a new iMac which has only 1 firewire800 and no firewire 400 ports. My digital video camcorder has a firewire 400 cable to transfer taped recordings to the computer (I want to import using iMovie 09). So, do I simply need to buy a new firewire 800 cable that will plug into my digital camcorder? The reason I'm hesitant is that I've tried using a USB connection, and iMovie 09 didn't open and doesn't recognize that the digital camcorder is connected when I use USB. Does iMovie 09 just no longer recognize my several year old Samsung digital camcorder, or does it just not recognize it with a USB connection, and it will be fine if I get a firewire 800 connection that fits the new iMac? Is there another type of converter--e.g., a cable that allows a firewire 400 to plug in on one end and has the firewire 800 connection on the other end?
    Thanks

    Thanks for the reply. I went ahead and got a new cable and now I can plug for digital video camcorder into my new Mac. Unfortunately, as I feared, the Mac still doesn't recognize the camcorder. I checked the system profiler with the camcorder plugged in, and under Firewire Bus it reads Unknown Device:
    FireWire Bus:
    Maximum Speed: Up to 800 Mb/sec
    Unknown Device:
    Manufacturer: 0xF0
    Model: Unknown
    GUID: 0xF000FFFFFFFF
    Maximum Speed: Up to 400 Mb/sec
    Connection Speed: Up to 400 Mb/sec
    Sub-units:
    Unknown Unit:
    Unit Software Version: 0x10001
    Unit Spec ID: 0xA02D
    Am I just out of luck--the new mac just doesn't recognize my slightly out of date digital video recorder? Or should I be able to get a driver to make it work?

  • USB for analog to digital video input?

    I have a USB-based Analog-to-Digital video converter that I used when I had my PC, for transferring old family video tapes to digital to burn DVDs.
    Can I use this with my Mac with iMovie 08), or will the Mac only accept digital video via a Firewire input?
    - Mike

    Mike Rivera wrote:
    ... Can I use this with my Mac with iMovie 08), or will the Mac only accept digital video via a Firewire input?
    no, you can not use that device, because usb-devices need specific 'drivers', which in most cases are of no avail for Mac ..
    but...
    many harddrive-camcorders are connected via usb, and DO work with Mac..
    if a device has both (miniDV camcorders), the video is only imported via firewire, the usb-connection is only in use for stills, those devices allow to record ...

  • Transfer digital video to iMacG5 using 10.4.3

    I recently purchased a Panasomic PV-GS65 digital video camcorder. I use operating system OS X 10.4 on an iMacG5. I am trying to transfer my digital video from the miniDV to my computer using the USB connection cable provided by Panasonic, and I cannot get the computer to recognize the input. I am not sure what I am doing wrong. Please help.

    strangedogs is quite right, Leonard. You definitely need a firewire cable, I'm afraid.
    I have an almost identical camera (the GS75). USB is only for stills with this one. It always amazes me when they don't include a cable that is critical to function, but do include others which are less important! In my case I fortunately found that a 4 to 6 pin cable that actually came with my old iMac G3 DV+ was fine for the purpose (all my other FW cables are 6 pin to 6 pin - you need 4 pin for the camera end).
    Plug the cable in, set the mode dial on the camera to movie playback , fire up iMovie , and away you go.
    Cheers
    Rod

  • How can I upload digital video from a HDD camcorder to iMac Intel?

    I bought a Sony DCR SR100 camcorder with 30 gig HD, and the software that comes with it is Windows only, and the Mac software that they refer you to on the internet says "not Intel Core compatible"
    So get this - the online support guy from Sony says to get a digital to analog conversion card to load the video thru the AV jacks. I reminded him that I'm starting with digital video in MPEG2 on the camera's hard drive - which is essentially an external hard drive. Converting to analog didn't sound right.
    So there is an easy, no-brainer way to do this I'm sure (that is I hope)
    Thanks a lot for your help,
    Ellkabong
    iMac Intel   Mac OS X (10.4.6)   Sony DCR SR100 HD camcorder 30 gig (nice!)

    The problem (I discovered) is that the files are "muxed" which means that the audio and video are somehow intermixed, so they need to be converted into a standard that iMovieHD can read, like "DV"
    There is a shareware called MPEG STREAMCLIP that converts video into other things. I tested it and it does work. I just need to figure out the most efficient way to import, convert and open in iMovie.
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    I think it is universal which is cool.
    I am curious about the workstation that you mentioned to run windows software. Where can I find that?

  • Elgato video capture versus digital 8 camcorder to import hi 8 movies

    Hi!
    I have hi 8 video tapes which i want to import into my MacBook.
    I would like to work on them with iMovie 09, cut them, set titles etc. put music on and so on.
    Earlier I plugged my hi 8 camcorder into my panasonic DMR E85H dvd recorder with built in hdd.
    Then i importet them via handbrake into my MacBook.
    Then i importet them into iMovie 08 an did some cutting and so on.
    Then i recognized, that there where horizontal interferences in the movie.
    On the dvds the video is ok!
    It doesn´t matter if i play the videos in Quicktime or in iTunes or iMovie.
    If i would use a Elgato Video Capture to import or a digital 8 camcorder to import the videos to my MacBook would i be able to get a better result?
    Which one should i prefer - i have to buy each of them!
    Would the size of the camcorder-imported videos be bigger then with the Elgato device?
    Now i´m using iMovie 09.
    Thanks a lot for helping me out!

    Based on your comments about horizontal interferences, it may be that you are seeing interlace artifacts. The solution may be to deinterlace the clips.
    You might try checking the settings in handbrake to deinterlace.
    You might also take the clip you have produced in HB and deinterlacing using a free tool like MPEG Streamclip or JES Deinterlacer.
    Your MPEG2 on DVD is already compressed from the original on tape. Then HandBrake decompresses and recompresses it to h.264. You generally want to cut out compression steps in your workflow whenever possible, because each generation of compression will introduce noise and loss.
    You could also reimport from DVD using MPEG Streamclip (and the Apple QuickTime MPEG2 Playback Component). You could deinterlace at this step if needed.
    You could certainly import through a camcorder with passthru capability. It will be DV which will be a very high data rate and potentially high quality, but it will never be higher quality than the underlying analog material. But you will have eliminated a compression step so you will be closer to the original.
    ElGato products will certainly work as well. I use the ElGato EyeTV hybrid to capture from a VHS Deck, as well as to record high definition TV shows. My ElGato will capture to MPEG2, although the newer models may capture directly to MPEG4 (not sure). You would then use the ElGato software to export to iMovie in an editable format such as h.264 or Apple Intermediate Codec.

  • I have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2

    i have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2
    i tried to get the installation disc for the camcorder but mac wont' recognize it becaue it is windows based i guess.
    i just bought the camcorder a few months ago and when my computer crashed thought i'm finally getting a mac...it's been a costly venture which has resulted in more frustration than before my pc.
    now the things i want to use with my mac that i thought would be even simpler...are not even useable...
    help

    That camera shoots H.264 in an .avi wrapper.
    You will have to transfer the files via the Finder.
    Get a free copy of MPEG Streamclip and convert them to QuickTime .mov using the H.264 codec if you are presumably editing in iMovie.
    Note that your list of video codecs won't look like mine as I have Final Cut Pro, but H.264 is definitely an option for you.

  • Downloading digital video from camcorder using USB

    I know this is not really a new topic, but I am new to all this and can't figure out how to post to an existing topic which addresses it. I found a posting which says I can download digital video by opening "Image Capture" and under preferences telling what I want done when a USB camcorder is connected. I find that preferences does not specifically ask about USB, but does ask, when a camcorder is connected, if I want to open Image Capture, IPhoto, or no application. I selected Image Capture, connected the camcorder through a USB port, set the camcorder to play/edit, and got nothing, no acknowledgement that the computer recognizes the presence of the camcorder. Now what?

    Well, I tried Firewire, which I thought myself would solve the problem. Bought a new Firewire cable because I have never had one. Plugged the 4-pin into my camcorder, and the 6-pin into a Firewire port on my eMac. Turned the camcorder on to Play/edit, which is the playback setting. No indication on the computer that the camcorder is connected. Tried Image Capture, iPhoto, iDVD, and iMovie. None of them gave me anything. I suppose there is a slim possibility that the cable is defective, but I don't have any other Firewire peripherals, so I don't know how to check it. Any suggestions on that or any other way to troubleshoot? I also tried playback of a video in the camcorder. It plays fine internally, but still no response from the computer.

  • Can you connect a sony camcorder to a mac to edit the video

    Can I connect my Sony camcorder to my mac to get the videos on my mac and edit them?

    Yes, that is precisely what iMovie is for, but which camera, what version of iMovie do you have, and what version of OS X?

Maybe you are looking for