Mac Os X doesn't booting on my macbook pro
Folks,
I've installed Windows 8.1 on my macbook pro through boot camp assistance. After installing windows 8.1, i couldn't boot my Mac OS X. I can see Mac OS X booting option in Boot Camp Control Panel on Windows.
When i select "Mac OS X" as a default boot and restated the machine. But it doesn't boot the Mac OS X and the Windows OS booting always. I tried by pressing option key while restarting/starting the machine. Only Windows OS option is there.
On Windows, i could see all the files that are in Mac OS X. Entire drive was there. Could you please help me how can i bring back Mac OS X as a booting option.
You need to reinstall OS X:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.
Similar Messages
-
Can a Mac Pro boot off a MacBook Pro in Target Disk Mode?
Summary: "Are you able to boot a Mac Pro off of a Mac Book Pro in Target Disk Mode?" OR "Will a Mac Pro boot off an OS X install that was made on a MBP?"
Details:
I'm finishing a music project that was created on a PPC G5 Quad computer and going to a studio in Santa Monica to complete the final mixdown. My 3rd party software plug-in configuration is unique, and the studio doesn't have all of the software instruments that I do on their 8 core mac pro. My G5 software installation is mirrored to my MacBook Pro, but the MBP doesn't have enough CPU power to play the project back.
Is it feasible to have the studio's 8 core Mac Pro boot from my MacBook Pros hard drive? Essentially, we'd be using my OS and software on their powerful CPU / hardware. I figure, since they are both Intel builds of OSX, this should be do-able.
I don't have access to the Mac Pro until I show up to start working.
Thanks for any input / suggestions!The MacBook Pro boots fine in 10.5.8, and loads the Logic project without any faults. The only issue is that a CPU shortage occurs when you attempt to play the sequence.
Like you suggested, I performed separate UB installations of all the needed software on the MBP solely so I could move Logic projects from one computer to the next without a hitch. (Actually, DropBox does this for me). Migration assistant was not employed in this process due to the PPC / Intel issues you noted.
I didn't need to mention the G5 as it appears to have caused some confusion based on Kappy's reply, but I did want to explain my work flow thoroughly.
It sounds like booting the MacPro from my MBP is feasible. I'll mark this topic 'solved' and head over to the studio tonight. I'll post here any anomalies from the session (if any).
THANKS~! -
Please help. I can boot up my macbook pro and log in but after that all i see is the wallpaper, toolbar and the dock. In the dock it has 2 ? where the doc and download folders should be. If I open up a new finder window it doesnt show anything in there no hard drive or anything. If anyone konws how to help let me know please and thank you.
Agree with baltwo, though even if you have saved the install app I wouldn't use it unless its been used to install a known good copy of the OS already.
In your case, that probably means start fresh:
Restart the computer, holding down 'command' and 'r'. When the recovery disk window shows, choose 'Reinstall Mac OS X'. -
Hello, I have mistakenly deleted all partitions on my mac while trying to install windows on my macbook pro, how do i reinstall the mac os back. I just wanted to have them both, please help. thank you in advance
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
[SOLVED] Two Grub boot menus on Macbook pro 7.1 efi boot
Hello
This is my first Arch post and I feel a bit of a fool for making the error I'm going to describe but here we go....
A couple of weeks ago I installed Arch as dual boot on my Macbook pro 7.1 and I'm generally quite happy with the result. I boot as EFI using Grub2 having followed instructions to make a standalone boot.efi and boot from the mac's bootloader. The boot.efi file is placed on a small macosx journaled partition that has been made bootable with "bless". I've been able to boot between the two systems using 'alt' at startup or, more generally, just leave the pc to boot into Arch.
When I generated the boot.cfg file I didn't specify ro or rw but grub added ro. So I've had the "root mounted as ro" warning since upgrading to 3.10.3-1 (I don't subscribe to the testing repository) although it was obviously an issue from the start and I was aware of it. After reading some of the forum posts today I thought I'd have a go at changing the boot parameters at startup and edit the boot menu to include rw. This worked and I didn't get the read only warning. I decided to try to generate a new grub.fcg and specify rw before generating a new boot.efi. On inspecting the new boot.cfg I noticed it had both ro and rw entries. I decided to think about what to do (thinking of removing the ro) before making the standalone file.
Anyway, I had to boot into osx for something else but when doing so noticed that I now have 3 efi boot options in the mac bootmanager. Two are grub and one boots osx. I've had a look in the forums and on the internet in general but can't find out how to remove the second entry. My guess is I've installed grub on my Arch /boot partition but can't figure out how to remove it.
Although I can boot into Arch as normal as the pc defaults to the original grub menu, I'd like to remove the additional entry if possible and would be grateful for any help.
Dylan
Last edited by youngdm (2013-08-06 21:00:37)These are the instructions I followed
grub-mkconfig -o boot/grub/grub.cfg grub-mkstandalone -o boot.efi -d usr/lib/grub/x86_64-efi -O x86_64-efi -C xz boot/grub/grub.cfg
Then in osx:
sudo bless --device /dev/disk0s4 --setBoot
I think that on initial installation I ran the command above as one and then last night ran it as two. Like this:
grub-mkconfig -o boot/grub/grub.cfg
grub-mkstandalone -o boot.efi -d usr/lib/grub/x86_64-efi -O x86_64-efi -C xz boot/grub/grub.cfg
The instructions were from:
http://codylittlewood.com/arch-linux-on … tallation/
From the apple discussion forums..
This one is a bit more tricky, surely there is another way but this one is simple and not so risky
1- burn a GParted Live CD iso
2- boot on the GParted live CD (press alt on boot and wait for the CD boot option to appear) and choose the first boot entry
3- during the boot process accept every option with its default value
4- in GParted select the EFI partition and somewhere in the menus select the "flags" entry and uncheck "boot"
5- exit GParted Live CD and boot in Mac OS
6- a new volume has appeared "/volumes/efi"
in the finder go to "/volumes/efi/EFI" and delete the "ubuntu" folder
7- repeat steps 2/3 and step 4 but check "boot" instead of unchecking it
8- exit GParted live CD and reboot
I have found the instructions above on the apple discussion forums but as noted above I'm a little wary about following them. I guess though that I need to remove the entry in the mac EFI partition which is hidden in osx but shows as sda1 in Arch.
Do you think I could mount sda1 in Arch and have a look at what's on there? From the instructions above it looks like there should be a directory for Arch that could be deleted. I presume that Arch is booting from the blessed partition on sda4. Is this correct?
Last edited by youngdm (2013-08-06 11:46:09) -
When I boot up my macbook pro, it takes forever to start and I got grey screen...Help Please.
Just a minute ago I tried to boot up my macbook pro...normally the grey screen pops up with the whirring wheel, and then my Lion log-in screen comes up and all is well. This time, however, the whirring wheel spun forever on the grey apple screen. Then the wheel stopped and it went to a solid grey screen with apple...and nothing for about 10-15 seconds. Eventually it came up. BTW, this was the 2nd time I tried to boot because the first time, the grey screen with the whirring wheel stayed up for several minutes so I rebooted.
Anyone know what might be wrong? Thanks so much for your input!Just a minute ago I tried to boot up my macbook pro...normally the grey screen pops up with the whirring wheel, and then my Lion log-in screen comes up and all is well. This time, however, the whirring wheel spun forever on the grey apple screen. Then the wheel stopped and it went to a solid grey screen with apple...and nothing for about 10-15 seconds. Eventually it came up. BTW, this was the 2nd time I tried to boot because the first time, the grey screen with the whirring wheel stayed up for several minutes so I rebooted.
Anyone know what might be wrong? Thanks so much for your input! -
how do i uninstall CS2 - the old version doesn't open on my macbook pro i am reinstalling an updated version
You simply trash it.
Mylenium -
When I click on the 'help' key in the elements 12 program it wants to open it in Firefox2. Firefox doesn't work on my Macbook Pro Air. I use Safari. How do I get it to open?
Hmm, that is very strange. I agree with MichelB that it's probably best just to get the PDF, but you can try going to your username>library>preferences and deleting:
com.adobe.PhotoshopElements.plist
Adobe Photoshop Elements 12 settings
Adobe Photoshop Elements 12 paths
To see the library, click the Go menu in the Finder and hold down the option key and it will appear below the little house for your user account. While you're in there it wouldn't be a bad idea to go to the Saved Application States folder and delete anything pertaining to PSE.
Repair permissions and see if that does it. -
im running mac os x V10.5.8 on my macbook pro. Is there anyway i can update the operating system to os x lion?
If it's a Core Duo Mac, no.
If it's a Core 2 Duo or better Mac, phone the online Apple Store and order a Mac OS X DVD, and if the computer can't run 10.8, a download code for 10.7.
(70266) -
Im completely new to Mac. Im swapping my windows laptop for macbook pro and looking for network storage solution which the Time Capsule seems to do. Is it possible to use this as NAS for my desktop Windows PC - windows 7
Broadly speaking I want some sort of network storage( wireless or through my existing wifi router) that I can access files for both my windows PC and Macbook and also to access files to my iPad/ iPhone. Some sort of backup and sychronisation so that I can access certain files remotely.
Buy a real NAS.. synology or QNAP are the standard... although companies like Netgear and Western Digital and Seagate make them as well.
There is no problem sharing between Mac and PC now.. you do not even need a NAS to do that.. you simply share the hard disk directly. Mac talk SMB.. everything talks SMB nowadays.. so it is easy.
ipad and iphone are not designed to use NAS.. they are designed to backup only to the cloud or itunes.. but you can load an app like file browser if you want.
http://www.stratospherix.com/products/filebrowser/
Remote access to the Apple TC is somewhere between difficult, to impossible from a PC.. Apple use BTMM and iCloud but the service is not offered to PC.
A real NAS will offer HTTPS or SFTP or several other methods.. that both Mac and PC can use.
You simply plug it into the current wireless router.. it is a network device and assessable over the network. It is not necessary to buy another router.. in fact that is a waste. -
I have installed Windows 7 using Boot Camp on Macbook Pro OSX 10.9.3, I'm not able to connect to wireless and its not showing as well in network sharing. Please help
Hello Bhagyeshree
Check out the articles below to troubleshoot issues with connecting to Wi-Fi. Start with creating a new Network Location and then search for a Wi-Fi network and if that does not work, then go through second article to troubleshoot the issue further.
OS X Mavericks: Add a network location
http://support.apple.com/kb/PH13788
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Regards,
-Norm G. -
Unfortunately I had Install My Mac os x 5 times on my new macbook pro and now....
Hello! Guy's,
Unfortunately I had Install My Mac os x 5 times on my new macbook pro and now.... My MacBook Pro Is Getting slower ... Please help me...!!
I think I'm doing any mistake... I am sure am installing my mac properly but .... Should we have to install any patch after installing mac os x..??? Please help.... My mac is getting slower and slower...!!!! And I'm Also getting problem in connecting to network... I am using wi-fi ..!! and sometime my network get disconnect .... Please help..!!!!@Carolyn Samit
Mate Actually...!!! I had Heard that We Can Intall Windows 7 On These New macBook pro ...!! nd Because Of Installing Windows 7, I had Installed Mac os X Again An Again..!!! And Now ..!!! Everything Is getting Slower And Slower... What to Do..!! now I Never going 2 install .. Windows 7 on my macbook pro...!!! but for now.. Please Help me... Please.... I want that incense speed Back..!!!! Please help..>!!!!
Thanks In Advance
Sanchit Shokeen -
I purchased lightroom for my mac desktop, can i download it to my macbook pro too?
I purchased lightroom for my mac desktop, can i download it to my macbook pro too?
Install it just as you did on your Mac desktop.
Which version?
You can download from Adobe
Adobe - Lightroom : For Macintosh
Install then enter your serial number. That's it. -
just bought macbook pro and using home sharing to transfer all music and movies from old mac, if i start syncing iphone in new macbook pro will i loose all content already on it
iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library. -
Hi
It always worked, till now. If I sell a Apple notebook because I bought a new one, I make a clone with CCC and with Command-R or Choose Startup disk I say to the new machine: now eat this, here's my old stuff.
It's a great way of upgrading to a new machine. But.. my late Macbook Pro 2013 (Retina, 16 Gb) doesn't allow me to boot from any of my disks: not Firewire, not USB 2.0 and not USB 3.0 (Imagine how many hours I lost to find this out). Btw, the disk image did boot on ANY OTHER Mac, besides the late Macbook Pro 2013.
In some threads, https://discussions.apple.com/thread/5499231?tstart=0, it's suggested that it has to do with a special Maverick that doesn't allow older "machines" to be booted from USB.
Anyway, here I am with a tremendous problem. Got my files safe in a clone, but my machine doesn't allow me to boot from it. Btw, out of desperation I tried to use the Migration Assistant, but that made a mess of Adobe versions.
Is there any workaround? How do I get the files + system files from my USB / Firewire disk to my Macbook Pro?I took the precaution to update my old Macbook Pro to the same Maverick version and EFF as my new one. The problem is rooted somewhere in the special version (and not the Combo) of Maverick.
Now I need something to outwit this. Gonna try to make an image of the clone, deleting a version file and than feed it once more. Will post the results here.
Maybe you are looking for
-
Anybody out there got the Remote app to work in Vista? I've gone so far as to disable the firewall on the PC, but I never see the iPhone in iTunes devices list (yes, running iTunes 7.7) to enter the passcode. Both are on the same wifi network and the
-
IPhone 5 has 18.06 GB of storage dedicated to "Other"
I upgraded to iTunes 11.1.5 last week and have had non-stop issues with it since. At first, I couldn't get my iPhone 5 (running iOS 7) to sync at all and after doing many manual resets and re-installs, I finally was able to sort out that issue by res
-
Address bar redirects to another site..?
in the address bar where you type in the "http//"-address i usually just type like: "google" and firefox automatically adds the "http//" and ".com/.se/.net" prefix and domain. But, recently i have installed a software for downloading torrent-like fil
-
Packing according to pack level
hi, in help for pack settings I see: <b>Requirements You have defined your ID Settings. You have configured the relevant rules such that packing is done according to pack level.</b> how can I specify that? should I use activity DEVICE_VALIDATE_40 for
-
IPhone 4 on iOS 7.1 Springboard Bug
Will apple fix this annoying Springboard bug on iPhone 4?