MAC OS "X" Install Disk 1 & MAC OS "X" Install Disk 2.
I am new to the Mac's World. I got tired of Windows "XP" operating system and its blue screen of death. So, here I am trying to learn something new. I just got a ibook G4, and in the box came with it 2 disk. My question is: Mac OS "X" Disk 1 & Mac OS "X" Disk 2 are already pre-install on my ibook G4 or I have to install these two Disk my self into my ibook G4?
ibook G4 Mac OS X (10.4.2) Laptop
You don't have to install anything from those discs. Everything is already installed. It is important to have the install disc 1 handy because you need to boot from it if you ever need to do a Disk First Aid repair with Disk Utility. You also can use the installer on the disk to install the OS on an external Firewire hard drive. That allows you to boot from the external drive should you need to do repairs to the internal drive's system or do troubleshooting.
Similar Messages
-
Windows Vista install disk for my Mac?
I have just installed Windows vista onto my Mac but when using boot camp it only gives me the option of creating a Windows 7 install disk. Does anybody know where I can get a Windows Vista install disk? Thanks
No doubt if you Google for it you will find vendors. Check with amazon.com, too.
-
Installing a trial version of the Illustrator and InDesign App in Creative Cloud on my Mac is impossible. Keep getting 'Installation failed' notices. More information gives 0 fatal error(s), 0 error(s). Already repaired disk permissions in Disk Utility but nothing seems to work. Exit code: 7.
Hi Maarton,
Please follow the link to resolve the issue: Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
-Ankit -
I purchased a Mac book Pro in Aug 2012 with lion and have upgraded to mountain lion. I currently am looking to install the segate 750 gig hybrid drive. I watching video I shows me needing a OSX 10 disk to boot off of when the new disk is in and the use time capsule to restore system from back up drive to new hybrid. Hope I got this correct so far. that being said my Mac Book did not come with a disk therefore is one available, when I get to point of restoring from back up with it be the same mountain lion system I had. Sorr if this sounds redudant.. Thank you in advance
Connect the new hybrid drive to your MBP. Start up your MBP holding the OPTION key, the two HDD icons will appear. Select the 'restore' icon on the right. When you get to the menu where you have 4 options, select Disk Utility. Format the drive and then you can use the option of restoring it from Time Machine.
Ciao. -
I have a 2010 mac mini referbished and i dont see the Disk Utilitiy in the Utilities on the install disk. Is that because it is refurbished?
The software that comes with your refurbished Mini should be identical to that which comes with a new Mini. Disk Utility should be in Applications > Utilities. Alternatively, choosing Utilities from the Go menu at the top of the finder windownwill take you directly to the Utilities folder.
-
How to install an OS on a Mac Pro without using a startup disk
Good Evening... I have purchased an Mac Pro 4,1 without any HDD attached to it and I have no startup disk for the installation an OS... When I do power on the Mac Pro, I get a flashing folder with a question mark in it! How can I be able to add an OS for two HDDs that I would like to install?
No. Boot the MP using the external drive. If you need to prep the drives, then:
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select the hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Once the drive has been prepped just clone your external drive to the internal drive:
Clone using Restore Option of Disk Utility
1. Select the destination volume from the left side list.
2. Click on the Restore tab in the DU main window.
3. Select the destination volume from the left side list and drag
it to the Destination entry field.
4. Select the source volume from the left side list and drag it to
the Source entry field.
5. Double-check you got it right, then click on the Restore button.
Destination means the Internal drive. Source means the External startup drive. -
I partitioned my MacBook Pro and installed Windows 8 in it.....now I can't find my partition when I pressed option key when booting up.....so how can I do to find the partition to boot...I can see it in the disk manager in Mac....any ideas? thanks..!..
Hi LamboMong,
just try this:
http://refit.sourceforge.net
install, reboot twice and choose the Windows-Partition on next startup.
(The apple-bootloader doesn't display all bootable harddisks.
With rEFIt you can boot from all partitions/harddisks on your computer.)
I hope that will solve your problem.
Daniel Fernau -
I just recently purchased this macbook. The optical drive was faulty, i opened it up and rubbed alcohol on the lens and that didnt work. I connected an old ide dvd rw drive in a 3.5 enclosure and it seems to work like a charm. I installed snow leopard with it so i know that it is in complete working order. I also upgraded the ram so that should not be an issue either. This is a first generation macbook 1.1 with the core duo processor. I just want to install my xp professional operating system onto this unit. I have the original xp professional disk with service pack 2, not a burned iso. When i try to launch the windows installer the dvd drive fires up and it seems like its attempting to launch windows then the screen goes from bright white to a folder with a question mark on it. From there nothing happens. Is there something i can do or that i am missing here?
Your problem is not Boot Camp, in fact, is your optical drive. Win XP requires indeed sp2, but also the internal drive, does not work from external optical drive.
For other possible tricks, please use the appropriate Boot Camp forum, not here. Mac OS X may be installed from both external and internal optical drive and/or internal/external partition of a disk, any disk. Windows is not so generous. -
i have a mac osx version 10.6.8 no windows installed and i am trying to install a program but keep getting can not run in dos mode ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?
You run Windows in Parallels or Fusion. Then in Windows you install the program.
-
Hi, I am new comer of Apple products.
I have a Imac (OS 10.8.2) and just bought a Time Capsule (2T). I have trouble to install it.
anyone here could help me?
I have downloaded the untility 5.6, during the installation, the message "the version of Mac OS X on this disk is not supported".
what I should do next.
thanksYou have Airport 6 right in the Utilities folder already.
5.6 will not install in ML after the upgrade to ML. -
I have an up to date version of Aperture on my Mac Pro, and I would like to install it on my new Mac book Pro. I have the original installation disks for Aperture 1 and 2. I cant remember how I got to Aperture 3, I think it was via a web download but not sure. I have checked my purchases in the App Store but there is no indication of me buying an upgrade to Aperture 3.
Ive tried to download it from the App Store but it wants me to pay again.
Can anyone help on how to install Aperture 3 on my new Macbook .
Many thanks regards AlfThen you can download the Trial version of Aperture 3 and unlock it with your serial numbers - you will need all three for all three versions: A current link to the Trial version is in this support document, also instructions on how to reinstall on different systems:
Aperture 3.4: May quit unexpectedly on launch after updating
Regards
Léonie
BTW: Your Aperture 3 serial number will be displayed in the "About" panel - the panel you see, when you use the command "About Aperture" from the Aperture menu in the main menu bar. -
Hi,
I'm looking to upgrade from Snow Leapord (10.6.8) to the new Mountain Lion. Have a lot of applications and softwares that I would like to back up when installing the new OS, such as MS Office, Adobe Photoshop and Illustrator. Any ideas on what is the best way to do that.
I'm not too tech savvy, so a simple solution would be appreciated.
Thanks,
ShyamIf your not very tech savvy, I would have someone assist you in the upgrade process as your about to inflict major change on your life and computer.
There are some things to consider before you upgrade.
1: The age of your machine:
My advice has been if your Mac is less than two years old and has a dedicated graphics (not all only Intel HD 3000 or 4000 CPU graphics like the 13" has)) then you stand a very good chance of 10.8 (or 10.7) running fine on your machine.
In either case you need to check the specifications of your machine to see if it meets Apple's requirements, and unfortunately those requirements are a bit low, resulting in a slower machine when you upgrade.
https://en.wikipedia.org/wiki/OS_X_Mountain_Lion
https://en.wikipedia.org/wiki/Mac_OS_X_Lion
(note: 10.7 is no longer being sold via the AppStore, you should upgrade to 10.8, however some machines can't, you can call Apple Sales to upgrade to 10.7)
If your machine originally came with 10.5, I would say forget it. Mac's don't last forever and laptops usually have a life of about 4 years with normal use. Desktops last longer of course and can withstand more OS X upgrades if Apple allows it.
2: The age of your software.
10.7 and 10.8 will not run PPC based software of old like 10.6 does, also upgrading to 10.8/10.7 may require expensive software upgrades that can hit you unexpected. Consult this site and your other needed software and hardware drivers/software (for printers/scanners,custom keyboards/mice etc) BEFORE you upgrade the operating system.
http://roaringapps.com/apps:table
3: Carbon Copy Cloner or SuperDuper "clone" (payware)
Your OS X boot partition to a new/reliable, blank powered external drive and use Disk Utility to Repair Permissions on both afterwards. You can hold the option key down and boot from this clone drive to use the computer like before if your OS X upgrade fails and the machine gets bricked. You can also use Disk Utility to erase the entire internal drive and reverse clone if you find out the OS X upgrade is not to your liking.
Make sure all other drives are disconnected, like TimeMachine when cloning or upgrading OS X, thus when you reboot TimeMachine doesn't self update itself, which can lock you out from going back in time to restore from.
Note: If you have Bootcamp, you can clone that with WinClone (payware) to another drive and recreate Bootcamp later and restore it.
4: Some firmware updates can possibly "BRICK" your hardware
Firmware updates progress in a forward manner and can't be downgraded, so what sometimes occurs is a software error by programmers or a hardware glitch on your machine won't 100% cooperate with the firmware update and thus your machine will fail to function. Sometimes even a interruption in the OS X upgrade or firmware update process will cause the problem. When this occurs, a trip to a Apple Repair is in order and if your machine is out of AppleCare (3 years) or the 1 years standard warranty your looking at a very expensive logicboard replacement. At this time you usually consider the cost not worth it and rather spend the money on the newer machine, especially if it's 2-3 years old. This can come as quite a shock as you expected to pay $20 for a OS X upgrade and now have to buy a whole new machine.
You can't not upgrade the operating system for security and bug fixes, however you make sure you have AppleCare that will protect you for three years if such a hardware bricking occurs. If you don't have AppleCare you might want to reconsider taking the chance upgrading the operating system and thus the firmware.
AppleCare can be purchased within one year of the original machine purchase, it gives one 3 years of care from the date of machine purchase, not from the date of AppleCare purchase.
5: Market share of OS x versions (apx)
10.4 4.5% security updates > no
10.5 15% security updates > no
10.6 52% security updates > yes
10.7 30% security updates > yes
10.8 2 million upgraded so far, just released
6: Your decision to upgrade or not
It depends upon your computer technical ability, the age of your machine, your software investment and your budget.
Can you afford to pay for professional assistance if your upgrade doesn't go as expected? Are you in AppleCare?
Can you afford to pay for upgrades to third party software?
Can you afford the downtime while your machine is being repaired?
Can you live without the "new features" newer OS versions provide?
Does your hardware even support the newer features?
You might decide the upgrade is not worth it for your older machine and decide to ease yourself into a new machine gradually. I took this approach with my 2006 MacBook Pro, buying a Early 2011 model. I then upgrade to 10.7 on the older 2006 machine and glad I did, because it got bricked. Turned out 10.7 was a pretty awful upgrade and I was out of AppleCare, however 10.8 seems to be "normal" far as OS X upgrades go, some problems but not mass bricking of machines. -
How can i install snow leopard on my mac G5 using a command line and booting from an external usb rom, since my disk i have is not a bootable media
Hi.
You simply can't. Snow Leopard is compiled in Intel binary only.
Good Luck. -
I have Adobe Photoshop Elements 10 and Adobe Premier 10 loaded on a Dell PC. Do I need to uninstall from the Dell before I install on a recently purchased Apple Mac Pro? There are separate disks for Mac and PC in the package.
Generally, it's ok to install on two machines as long as they are both yours and you only use one version at a time.
BTW, this is the forum for Adobe Contribute. -
I changed permission setting on main disk...took forever now when I bootup I get the chime...apple icon...fan noise...thats it...internal drive is broken...no Mac install disk..I have a windows XP desktop with installation disk..if I was to get external drive ...could I use windows XP styartup disk just to boot the "17"Powerbook-G4...have no intention of downloading XP on the Mac...just want to boot it up...or is there a way to boot the Mac from the XP desktop...cables...etc?
Hi Romko23, just pasted info from manual...PowerBook G4 "17" 5.3
Your PowerBook comes with a minimum of 512 megabytes (MB) of 533
MHz Double Data Rate (DDR2) Synchronous Dynamic Random-Access Memory
(SDRAM) installed. Both memory slots can accept an SDRAM module that meets the
following specifications:
 Double Data Rate Small Outline Dual Inline Memory Module (DDR SO-DIMM) format
 1.25 inch or smaller
 512 MB or 1 gigabyte (GB)
 200-pin
 PC2-4200 DDR2 533 MHz Type RAM
PS my keyboad is loose...I tighten the tiny screws...only...once ...tried all the key-strokes...Comand-option..P-R.....safe-mode... etc...Mac only reacted ...once...right after.. I tightend K-board >>C-OpT- P-R...mac chimed twice...the Apple icon in grey screen got smaller....now after trying ...keyboard .boot short cuts 10 times..nothing...it chimes ...grey screen....apple in window...fan noice ....thats it...do you think I need to tighten screws...again,
I actually think when I was changing permissions...on entire it was taking so ong...20 min...I just hit power,,shut it down...when it wasn't done...no patience.,...just thought of something ...sounds important...whern I resgisted on this site..I tried to use my Powrbook login name ..got message.... .. blocked...Secury problem....that has to be the problem..blocked..how do I unblock?
Message was edited by: CMK1 -
I wanted to install windows for Mac and I had vista so I put I the disk and installed followed the steps it then it closed my computer wen I turned it on it went straight to windows and it asked me to install it and put in the windows box code I found out I didn't have it so I wanted to go back to Mac I shut it off and it just goes back to windows and asks me to put the box code how do I get rid of it and go back to Mac because no buttons work at the start and i can't take out the disk !! Help
The two other posts are correct... so I'll just clarify. What's happening right now is your system is trying to boot into Windows in order to finish the installation. What you want to do is make it boot into OS X. As mende1 indicated, with your system off, hold down the Option key and continue to hold it while you turn the system on. You will eventually be presented with an option to select which partition you would like to boot from. Choose OS X. After you get into OS X, again, as mende1 indicated, change the Startup Disk to OS X. What this will do is cause your system to automatically boot into OS X when you restart it instead of you having to use the Option key when booting each time.
Relaunching BootCamp Assistant will allow you to remove your Windows installation and partition.
Maybe you are looking for
-
Spotlight Client Searching on OS X 10.5.1 Server
This is my first post after lurking and using the excellent advice that I have found in these discussions. I though I'd share a fix I found for Spotlight Server. I have a OS X 10.5.1 server with one internal drive shared and three firewire drives sha
-
Problems connecting Nano 7th generation to bluetooth in car
Why does my new nano 7th generation have problems connecting to my cars's bluetooth. All it does is search, search, search.etc etc etc?
-
Illustrator CS 6 und CC Leertaste funktioniert nicht.
Beim Schreiben von Texten in Illustrator CS6 und CC funktioniert die Leertaste plötzlich nicht mehr. Was macht man da?
-
I feel lost with this phone! :(
I got the bb 8330 about a week ago and think i've done pretty well but im still lost in the following areas: how to add a contact to bb messenger? how to download music from my computer (i downloaded the bb disc and have usb cord) to my bb? how to se
-
Installing BEx Faourties and History
Hi, My BEx Favourites and history are blank. Can You please let me know what can be done to make them available. I came to know that we have to install some cubes and ODS for them from Business Content.. Can you please suggest Hari