Mac OS X Installation DVD does not mount.

Hi, I was trying to perform a disk repair but my imac keeps spitting the installation dvd out. It is not mounting. How can i sort this? Please, anyone!

Another help source (if you haven't already done so).
Go to your OS Help Menu. In the search field type dvd
Click on all the troubleshooting topics & Support Articles that pertain to your issue.
You can also do the same in Disk Utility. Open same up.
At the bottom left of the window, click on the purple button w/the "?" in the middle.
This will bring up the Help Menu.
===============
Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs.
===============
If your system DVDs still do not work, you can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource: International Support Phone #s.

Similar Messages

Data DVD Does Not Mount

I burned some quick time movies onto a DVD today using the Super Drive on my Intel Core 2 Duo iMac. I then attempted to load the DVD on my Macbook. It would not load and Disc Utility does not see the disc either. I have restarted numerous times. I have tested movie DVDs and CDs and both work just fine. I have also tested the newly made DVD on an iBook where it loads just fine.
Is there anything I am missing? The new Super Drive update does not apply to this computer as I cannot burn DVDs.
Any suggestions or help would be great.
Debbie

did you do the superdrive updater on the macbook that had that problem?
are the media you using is dual layer media that might have incompatibility problem with combodrive?
Try to burn with other brand or media (sinle layer, dvd-r and or dvd+r).
Try to test that dvd with other mac that has combodrive (I think your ibook does have that).
If this problem persist, consult with apple or visit nearest apple store and bring along your burned disk and your other mac.
Good Luck.

CS4 Install DVD does not mount on Macbook Pro after Maverick upgrade

I upgraded a Macbook Pro to Maverick from Snow Leopard. I want to install CS4 but when I put the DVD in the Superdrive, it spins and spins and eventually says that the DVD is blank. I have successfully mounted other DVD's so I don't think it is a drive problem. I have also tried the DVD in a newer model Macbook Pro and it mounts successfully. Does anyone have any idea what is causing the problem. More important, is there a different method I can use to install CS4?

I am not saying that the CS4 applications will not work but Adobe has never tested All CS4 applications on MAC Maverick. It might or might not work.
http://helpx.adobe.com/creative-suite/kb/system-requirements-cs4-point-products.html
But yes if that works, its good. I just wanted to keep you updated in case in future if the application gives you any issue with the performance.
Help Articles:
http://helpx.adobe.com/x-productkb/global/mac-os-mavericks-compatability.html
Files open, save slowly | Mac OS X

Home DVD goes in, spins, does not mount, and then ejects. It does play on an old Windows PC.

Hi. I have a MacBook and I am able to play purchased DVDs just fine. However when I try to play the home DVDs my brother burned for me on his new MacBook Pro it doesn't work. The DVD goes in, spins, does not mount, and then ejects. It plays on an old Windows PC though. Very strange. Help!

I know your frustration, so happy I still own a PC just so I can burn any DVD I might still need!
I was told at the Apple store to go buy an external l0l
How awesome is THAT ...Yah you just paid an INSANE amount of cash for a CRAP laptop so now go out and spend MORE money on getting an external DVD burner so your expensive laptop can burn/play DVD's
YAY APPLE... wtg at putting out a quality product!
PS so fantastic to see all the responses to your cry for HELP here!

Ipod does not mount onto Mac OSX

My click wheel Ipod does not mount to my desktop nor to my Itunes. I tried resetting it but I cannot restore it because it does not mount. I also cannot open up the Ipod Update software file, it tries to open with Appleworks, then stops.

I have fixed my iPod blank/black screen problem (i suspect black screen for iPod5G black model, and white screen for the white model) On Black Friday, which was yesterday, after I upgraded the newest releases on QT/iTunes602/osx1044/iPod11, iPod didnt do anything, no mounting to my iBook/iMac/G5PwrMac. Hard reset didnt work, etc.
I decided to fix the iMac permission with local drive DiskUtility, then reboot the iMac with the Original Tiger iMac DVD software restor disc which comes with the desktop then repair the volume with this method. Then I reboot and then I did an extended hardware test with the same disc, but with the Hardware test disk (which is the same as software restore DVD, iinstead of holding down the c key, hold down the option key when reboot with the disc)
After all that, iMac restarted and recognize my 5G iPod 60GB, I quickly restore the whole iPod to manufacture setting, hopefully you have all the info backed up somewhere, I did a clean defractmentation, and then used the iPodUpdater from 11-17-2005 to restore the iPod 1.0 version.
Now I am done and my iPod works like new. Go try it guys... Good luck!

I am trying to reinstall Mac OSX, but my computer does not read installation cd

Hello, I am trying to reinstall Mac OSX, but my computer does not read installation cd. After restart, I hold C but either eject cd or doesn't read and computer boots up normally. I even ordered a new pack of installation cd, but still the same problem. Is there anybody can help me fixing this issue, because my Macbook pro has lots of software problem and when I spoke to tech, they said it needs to reformat and reinstall the OSX to solve all my problems. Please help me to reinstall my OSX!

Possible solutions:
You need to hold the c key down before booting
You need to use the built in keyboard, you have other hardware connected
You need the machine specific 10.6.4+ disks for that machine, the retail 10.6.3 disks won't work
There is a firmware password on the machine preventing the at boot key command functions
Try the option key for Startup Manager to boot from the disk, right after the "bong"
Your Superdrive lense is dirty or not operating, other hardware issues
You have malware of some sort

I am trying to install a brand new WD 500 gb sata internal hd in my macbook pro. the original install dvd does not recognise the hd. all hardware is ok. any help?

I am trying to install a brand new WD 500 gb sata internal hd in my macbook pro. the original install dvd does not recognise the hd. all hardware is ok. any help?

For some reason OS X disks (whatever edition or flavors) that are supplied with Apple products only seem to contain a limited knowledge of available hard drives on the market at the time of thier publishing. This (rather opportunistically) creates a "Best Before" stale-OS X-software-copy situation where upgrading to or replacing a defective internal SATA hard drive with a newer, better or larger one is a largely hit and miss affair.
If you buy the latest and greatest disk drive available for any older Mac you are likely to run into unresolvable problems making a clean re-install of your own, old edition or flavor of OS X onto any newer or larger hard drive since the OEM (gray) "OS X Install Disks" that Apple supply with retail products seem to contain only time-sensitive lists/mapings of then-known target drives that the Drive Management Tool in the then-published old "Installer Software" will support.
Presumably new (colorful "X") retail versions of OS X (10.whatever.whatever) also contain time-limited Installers with limited knowledge of and adaptability to/compatability with a limited number of old hard drives then kicking-around on the market.
This is especially a problem nowadays since the countless "puny old" hard drives that have been on the market are largely obsolete in a few months time, as manufacturers continue to produce larger and cheaper units, discontinuing older puny products... So if your drive fails you need an exact old (or similar familial) replacement drive for your "backup copy of OS X" to do a fresh, clean OS X re-install. Otherwise you need to purchase a new retail version of OS X, since yours is now effectively obsolete. Purchasing an old, puny drive to re-install your version.flavor of OS X to avoid buying a new version of OS X is a rather false economy.
If you still have a working old hard drive with your old polluted 10.version.flavor of OS X still working on it you apparently must clone it with Time Machine or the newest version of Disk Utility (disk image copying) to most newer, larger drives, and a clean reinstall to such new hard drives is not possible.

Windows installation failed and Windows Installation DVD can not be ejected

Hi,
I have tried to install windows, the installation was executed till the copy of the windows files. Then the Computer restart and ask to install Windows again (blue screen). As I can not eject the Windows DVD the system goes to the same loop again and again.
Starting the Mac with pressed left mouse button in order to eject the DVD does not work. Any idea how to eject the windows installation DVD ? It seems that does not work.
Thanks a lot
Tanja

ok, I understand that I had to press the option key by restarting the computer. Now it works.

Burned DVD will not mount correctly

I have burned a dvd on my macpro and everything completed correctly. However, when I put the disc back into the drive, it does not mount correctly. The title I gave to the disc not there (it mounts as "Untitled.fpbf") and no files appear.
Ironically, I can put the DVD into another mac or pc and the title and files are on the disc.
Is there a cache file i need to delete?

The key to this little mystery is in the ".fpbf" which is evidently the designation for a Finder Backup Burnable Archive file. From what little research I've done (never had the problem myself) it's not clear how the suffix gets attached, but it has become a popular topic lately. Googling .fpbf will get you started and with any luck this post will bump you to the top of the list and get you someone with more specific info.
good luck

Ipod (3rd gen.) does not mount to iTunes

My ipod (3rd gen.) does not mount on iTunes (using a Mac). When plugged in, it appears on my desktop as if it were a jump drive.
I was planning on re-formatting it with Disk Utility but I'm not sure if this is a good idea. I also realised that the Format is listed as Windows NT File System (NTFS) when I have the disk utility window open. If I need to format with Disk Utility, what format option should i choose? (i.e. Mac OS Exteneded (Journaled), Mac OS Extended etc.)
Thanks in advance!!!

Now when I connect the Ipod to my Mac, it mounts as a Device on iTunes. I want to sync only a few items from my library onto this iPod - when I attempt to do this (by either adding the specific music to the "music" section on the iPod or creating a playlist and using Autofill to fill the iPod), the iPod says that it has Synced but when I disconnect the iPod, there is no music on it. Why?

Windows 8.1 Setup DVD does not see SSD

Windows 8.1 Enterprise x64 Setup DVD does not see Samsung SSD 840 Pro so cannot install Windows 8.1. The same SSD disk currently does have Windows 8 Enterprise and runs fine on the same laptop. Checked the Dell BIOS does see the SSD. Loaded the
latest drivers from the Dell website but did not help. Tried changing the BIOS settings from SSD to ACHI. When in setup did the SHIFT+F10 to run the DISKPART clean the partitions.
How do I troubleshoot why the Windows 8.1 Enterprise setup disc cannot see the SSD?

Hi,
According to your description, I would like to confirm if you can see SSD under the Diskpart.
If you can see the SSD under the Diskpart,I think it is related to the installation DVD.
I suggest we use a new installation DVD to test it.
Also, you can create a bootable USB flash drive, and then use the USB flash drive to install Windows.
Keep post.
Regards,
Kelvin hsu
TechNet Community Support

DVD does not appear

My CD/DVD does not appear in Mac not in Win7 running under Virtual machine? Anyway ideas how to troubleshoot and diagnose the problem.

Look in the preferences for your Virtual Machine. If that doesn't work then refer to the forums for the Virtual Software you're using.
Roger

Maxtor OneTouch III does not mount with Firewire

My Maxtor OneTouch III does not mount with Firewire.
I changed both cables, and ports on the drive to try with my 400 port on the MacBook Pro.
The drive will start up, the light will flash, remain steady, flash again. And then just as the Mac finishes booting, the light turns off and it does not mount.
It works just fine with a USB cable. But I bought it so it could be used as a firewire drive.
Other firewire drives work.

Hi Judy,
Has this external HDD ever worked while connected with FireWire? (In other words, did the drive just stop working via FireWire, or is this the first time you've tried to hook it up via FireWire?) Does it work over FireWire on another Mac?
If the answer to those questions is no, it's likely that the firewire ports on the external HDD are bad.

Iomega prestige does not mount with osx 10.7

Iomega prestige does not mount with osx 10.7. I can see the drive under 'about this mac' under storage USB but it does not mount on the desktop or in disk untilities. It does run, the light is on, and I can feel the disk spinning. I have tried PRAM and NVRAM with no luck. Any ideas?

Is the disk designed for 10.7.5, or maybe an older OSX? At this point we are both trouble shooting in the dark. Maybe you might want to return the the drive and get something that you know was built for your machine. This does not make sense to me. Maybe one of the mega dot guys on this site can chime in and offer some info. Sorry I could not offer any more info.

Update 10.5.6: external HD used for Time Machine does not MOUNT anymore

I've used this LaCie external Little Big Disk since November 2007 with Time Machine, without problems. Recently, after updating to OS 10.5.6, the disk does not mount anymore when connected by FireWire800. Same result when using FW400 and USB.
The disk shows up in the System Profiler under FireWire. When I run analysis with a program 'Data Rescue II', it also sees the disk.
Main issue: disk does not mount anymore. So no more TM backups possible.
Although the disk also shows up in Disk Utilities, I can't partition or reformat it. I ran the LaCie Update Tool 2.0.1 and it says firmware is up-to-date.
I also reinstalled the Combo Update 10.5.6 without result. Also did all the forum recommendations such as resetting PRAM and using Terminal to 'mount /dev/xxx'. Does not help.
I feel this is an Apple issue.

Yes, did it three times. Also already hooked up in daisy chain, and yes, also connected to another Mac (also 10.5.6). Same result. I think it's an OS 10.5.6 issue, because it happened after the update and I had never problems in the last year using this disk with TM (it's not full either). I hope it's not, however, but I am afraid it is. Also I've posted the issue at LaCie support and see what they answer.
Thank you for your reply.

Mac OS X Installation DVD does not mount.

Similar Messages

Maybe you are looking for