Mac OS X Leopard - A Guided Tour.

Tonight I downloaded the above Apple video from YouTube and have noticed that the quality is not as good as I would like as a tutorial.
As this is an Apple produced video does anyone know where I can download the original so that I get good quality? I had a search of the Apple site but came up with nothing. For some reason they have removed the page!
Any help would be greatly appreciated.

Microwe,
Interesting that its down, I too could find links to it but of course no luck. You could always read through the following site as the information that was in the guided tour can be found there. http://www.apple.com/support/mac101/
Hope that helps,
Weston

Similar Messages

HT1338 Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

If you look at the User Tips tab, you will find a write up on just this subject:
https://discussions.apple.com/docs/DOC-4053
The subject of buying/selling a Mac is quite complicated. Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
SELLING A MAC A
Internet Recovery, and Transferability of OS & iLife Apps
Selling an Old Mac:
• When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
• Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
Internet Recovery:
• In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
• Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
iLife Apps:
• When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
• Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
• It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
SELLING A MAC B
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

How do I transfer files from mac with snow leopard to a new retina display mac

What is the easiest way to transfer files from my old mac(2008) snow leopard to my new retina display mac book pro?

Easiest? Well there is some sort of wireless transfer thing, but I hear it takes FOREVER like several days and it's glitchy.
The Retina doesn't have a Firewire port I believe, so Target Disk Mode is out, unless you have a adapter and I don't know how well that will work out. Cost another $30 for the adpatper I bet.
The likely most easiest?
Run down to any computer or office store and pickup a powered external USB hard drive that's the same size or larger then the old Mac's boot drive.
Boot the old Mac and download Carbon Copy Cloner.
(or use the TimeMachine if it asks, but it takes a reallly long time and if there are problems, then it's harder to recover files from)
Format the external drive in Disk Utility with Partition: option GUID and OS X Extended Journaled (default setting)
Use CCC to clone OLD A boot drive to External Drive B, takes about a few hours depending how much stuff you have.
Hook up drive to new Mac, (either clone or TimeMachine drive)
Use the free Migration Assistant in your Application Utility folder to transfer over, but creates a new user account (you can later delete one)
Or if you haven't set up the new Mac yet, when you do set it up during that process, you can transfer from the External Drive B and it won't have the account you set the machine up with naturally just uses the ones from the clone or TimeMachine drive.
Once your fine and dandy on the new machine, then Disk Utility erase and use the external USB to create either a bootable clone with CCC or a TimeMachine drive for backup.
Since you need a backup drive anyway, this method is better and happens to be reliable and easy.
Most commonly used backup methods

I can't erase, reboot, repartition or instal mac os x leopard on my hard dr

I can't erase, reboot, repartition or instal mac os x leopard on my hard drive.
I tried installing windows xp using bootcamp. I think I accidently installed it on the same partition as leopard. I didnt complete the installation of windows xp. but leopard got deleted.
I tried to reinstall leopard. I wont let me do it cause my hard drive is partition't as a windows nt file system (NTFS). I cant repartition it either using disk utility cause for some reason its read only.
Can someone help me.

Do this:
Extended Hard Drive Preparation
1. Boot from your Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from theUtilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
Quit DU and return to the installer. Complete the Leopard installation. After you've installed Leopard you can use Boot Camp Assistant to create a Windows partition and install Windows.

How can I go back into the Mac os snow leopard if I'm on windows 7 on my MacBook pro?

I installed Windows 7 Ultimate 64 bit into my MacBook pro using Bootcamp, but I can't go back into the Mac OS Snow Leopard. Every time it starts up, it goes into Windows. Can someone please help me?

Boot Camp
MacBook Pro
X on startup
install Apple drivers in Windows and use Boot Camp control panel there, or from quick switch taskbar.
hold option key on startup.
read the guide for boot camp.
Apple Support Boot Camp

Restore mac mini snow leopard no administrative privilege

Would like to reset mac mini (Mid 2007 - Macmini 2,1) to factory settings. However, don't have administrative privileges. Tried to boot with os snow leopard and holding alt and c. It didn't work.

Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
     5. If you are planning to sell or give your computer away, then do the following:
        After you reformat your hard drive and reinstall OS X, the computer restarts to a
        Welcome screen and asks you to choose a country or region. If you want to leave
        the Mac in an out-of-box state, don't continue with the setup of your system. Instead,
        press Command-Q to shut down the Mac. When the new owner turns on the Mac,
        the Setup Assistant will guide them through the setup process.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

I have a Mac mini Snow Leopard. In Numbers the grid lines are so faint that they are barely visible. Please could someone help me sort out this problem.

I have a Mac mini Snow Leopard. In Numbers the grid lines are so faint that they are barely visible. Pleease could someone help me sort out this problem?

The User Manual has this:
Formatting Table Cell Borders
You can change the line thickness and color of table cell borders. Or you can hide the border of any cell.
To format table cell borders:
1 Select the cell border segments you want to format.
2 Use the controls in the format bar or in the Table inspector.
Click to choose a stroke color.
Click to choose a stroke style.
Click to choose a line thickness.
Stroke pop-up menu: Lets you choose a stroke style. Choose None to hide borders.
Line thickness: Controls the thickness of the stroke.
Color well: Lets you choose a stroke color.
When you click the color well in the format bar, a color matrix appears. Select a color by clicking it in the matrix, or click Show Colors to open the Colors window for additional color options.
When you click the color well in the Table inspector, the Colors window opens.
User Guide: http://manuals.info.apple.com/en_US/Numbers09_UserGuide.pdf

New iphone guided tour problems

Has anyone downloaded the new iphone guided tour:
http://www.apple.com/iphone/usingiphone/guidedtour.html?cid=CDM-US-iPhone-5405A& sr=em&cp=ip-bob
I downloaded it and when playing it the sound continues but the video freezes.
imac 800mhz Mac OS X (10.4.10)

Many G4 800 users have been having trouble with video "freezes".
Try putting you iMac to "sleep" for a minute and view the file again.

I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

Try clearing your cache, [https://support.mozilla.org/en-US/kb/How to clear the cache Instructions here]. Then, try going to [https://accounts.google.com Google Accounts]. If there is currently an account singed in, sign out, then back in. After that, try going to Google Adwords.

I transferred files from a NAS server to the Mac Mini Snow Leopard Server and now some of the files have Custom Access and can't be opened by some users. How do I fix this?

We're setting up our Mac Mini Snow Leopard Server, and in the process transferred files that had been stored and accessed from our Blackarmor NAS server over to the Mac. These files were all created on PC's and are Office Excel files, WordPerfect files or PDF's. When you look at the files on the Mac from the Mac and bring up Get Info for the affected file, it says that the file has Custom Access. The files that work properly don't have that configuration. I can access and open the files on some computers, but some users can't open the files from their computer even though they can see it. We're all using PC's and they get the Error: Access Denied-Contact your administrator--or something similar. I've seen on the web similar issues and it may have something to do with ACL permissions. I don't know enough about Mac OS to understand this, but what is baffling is that they can be opened from some PC's but not others, and all of the Users have the same accessibility to the files. Thanks for a solution!!

Oh, on the losing Internet, try this...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
PS. Your English is quite good & completely understandable.

I lost my ability to use Microsoft Offic for Mac, when I upgraded my MAC from Snow Leopard to Mountain Lion! HELP!

HELP !
After I upgraded my operating system on my mac, (from Snow Leopard (10.6 ? ) to Mountain Lion (10.8.2), virtually ALL of my documents (recipes, update logs, information of untold things), have been denied to me with my Microsoft Word for Mac (which I have used since I purchased my mac in Aug.2008).
      I now get a window that tells me "You can't open the application "Microsoft Word" because PowerPC applications are no longer supported." (Needless to say, I cannot use Excel or anything else, either!)
      Yet, I can still access them, fully (read and even print fro them), individually, by dragging a file into my PREVIEW program!
      What gives?
      I am not a savvy programmer, nor do I confess to somehow being warned that this might happen when I upgraded my operating system.
     Is there any reasonable (easier?) way to continue the use of these (to me) very important files? I only upgraded because I upgraded my iPhone to a 4S and wanted everything to conform to siimilar circumstances!
     What can I DO?

You need to upgrade your copy of MS Office. You're using a version that is 8 years old (at least). You can buy Office 2011, which will work. You could also get a copy of Pages from the App Store, which is cheaper and will open Word files (though not perfectly). Or you could get a free Office clone, like OpenOffice or LibreOffice.

HT1338 I installed Mac OSX Snow Leopard 10.6.3 And now my Java is not working, what can I do to fix's this?

I installed Mac OSX Snow Leopard 10.6.3 And now my Java is not working,what can I do to fix's this?

Run Software Update to get to 10.6.8 and update Java.

Can't print from Intel Mac w/Snow Leopard to HP 2600

Can't print from Intel Mac w/Snow Leopard to HP 2600. Upgraded from OS 10.4 and printer showed on printer list along with an Epson scanner. but continually shows printer as offline. I finally deleted the HP Color Laserjet 2600n from the printer list. When I attempted to re-install it, it doesn't find the printer at all. I haven't attempted to use the scanner. I also went to HP and downloaded the driver, no luck. I've restarted the computer multiple times, tried it with the printer on, and printer off, as well as pulled the usb cable in and out both ends. No error message on the printer display and it gpes through normal warmup until it shows the green light. I run software update and it shows no updates needed. Help!

Go down a few more posts to the question about the C7180. Answer:
"Re: iPhoto 08 + HP Photosmart C7180
Posted: Aug 19, 2007 1:26 PM in response to: Daniel_D
When you press print the first window is pretty basic.
When you select print on that the next window should have an advanced option.
Click that and see if any of the options in the 3rd dropdown box allow you to specify the 'paper tray'.
AC "
In this new windaow, click "advanced", go to "paper type/quality" and choose " best" and a photo paper. Then you will be able to choose a paper source (photo tray).
Once you have these settings, under presets do "save as", and you can choose the preset instead of going to advanced.
If you have the latest software and drivers downloaded from HP, this will work.
Scott

Pdf printing problem Mac OSX Snow Leopard Canon MP620 Pixma printer

After upgrading Adobe Reader version 9.3 to version 10 I cannot print pdf documents using Canon MP620 Pixma printer. Mac OSX Snow Leopard operating system. All other prining works OK. Never had problem before Error message "pstopdffilter/ pstocupsraster failed with err no. 13" comes up. What has happened and how do I put it right?

See this link for a solution:
http://forums.adobe.com/message/3476912#3476912

How do I install OS 10.7 NOT 10.7.5 on a mac running Snow Leopard 6.8 i.e. where can I find the original install app for Lion OS 10.7.0?

I'm running 10.6.8 Snow Leopard fine on my MacPro1,1, Dual-Core Intel Xeon, 2.66 GHz Mac, but I need to install Lion 10.7.0 to run a program I need.How do I install OS 10.7 NOT 10.7.5, because I get this message when I try to install 10.7.5, which I've downloaded:"This update requires Mac OS X version 10.7." on a mac running Snow Leopard 10.6.8, So i need to install the original 10.7.0 over the 10.6.8 i.e. where can I find the original install app for Lion OS 10.7.0? The original Lion 10.7. is not avaialable for purchase from the App store or anywhere, even C-Net . Where can I find it to purchase?
Also it seems I cannot install Mountain Lion over 10.6.8 as advertised. When I go to purchase I get this message: "We could not complete your purchase. OS X Mountain Lion is not compatible with this computer." I think my computer can handle it (specs above) Are there any workarounds to this?

If you're getting a "This update requires Mac OS X version 10.7" message, than you have the updater and not the full installer. Go to your Purchases section of the Mac App Store and you should see the full version there. But it may be 10.7.5, though in my system is shows as being from 2011 which would appear to be the original version.
As to Mountain Lion, that's supported only on the Early 2008 Mac Pro or newer.
Regards.

Mac OS X Leopard - A Guided Tour.

Similar Messages

Maybe you are looking for