Mac OS X Leopard like NFS Client
We have NFS server (CentOS 5 Linux).
ANON and Guest user can't connect to this server, only register users.
We take instraction form http://nedos.net/2007/11/10/nfs-in-mac-os-105-leopard/
But we can't take access for NFS folders.
We made UID and GID for mac users some like linux server, but this don't work.
The media is the same for either 10 client or unlimited.
It is the serial number that makes the difference as to how many afp clients can be connected at the same time.
Also the 10 client restriction does not apply to web, email, ftp, and so forth. Only the concurrent file-sharing connections.
Similar Messages
-
ISCSI, AFP, SMB, and NFS performance with Mac OS X 10.5.5 clients
Been doing some performance testing with various protocols related to shared storage...
Client: iMac 24 (Intel), Mac OS X 10.5.5 w/globalSAN iSCSI Initiator version 3.3.0.43
NAS/Target: Thecus N5200 Pro w/firmware 2.00.14 (Linux-based, 5 x 500 GB SATA II, RAID 6, all volumes XFS except iSCSI which was Mac OS Extended (Journaled))
Because my NAS/target supports iSCSI, AFP, SMB, and NFS, I was able to run tests that show some interesting performance differences. Because the Thecus N5200 Pro is a closed appliance, no performance tuning could be done on the server side.
Here are the results of running the following command from the Terminal (where test is the name of the appropriately mounted volume on the NAS) on a gigabit LAN with one subnet (jumbo frames not turned on):
time dd if=/dev/zero of=/Volumes/test/testfile bs=1048576k count=4
In seconds:
iSCSI 134.267530
AFP 140.285572
SMB 159.061026
NFSv3 (w/o tuning) 477.432503
NFSv3 (w/tuning) 293.994605
Here's what I put in /etc/nfs.conf to tune the NFS performance:
nfs.client.allow_async = 1
nfs.client.mount.options = rsize=32768,wsize=32768,vers=3
Note: I tried forcing TCP as well as used an rsize and wsize that doubled what I had above. It didn't help.
I was surprised to see how close AFP performance came to iSCSI. NFS was a huge disappointment but it could have been limitations of the server settings that could not have been changed because it was an appliance. I'll be getting a Sun Ultra 64 Workstation in soon and retrying the tests (and adding NFSv4).
If you have any suggestions for performance tuning Mac OS X 10.5.5 clients with any of these protocols (beyond using jumbo frames), please share your results here. I'd be especially interested to know whether anyone has found a situation where Mac clients using NFS has an advantage.With fully functional ZFS expected in Snow Leopard Server, I thought I'd do some performance testing using a few different zpool configurations and post the results.
Client:
- iMac 24 (Intel), 2 GB of RAM, 2.3 GHz dual core
- Mac OS X 10.5.6
- globalSAN iSCSI Initiator 3.3.0.43
NAS/Target:
- Sun Ultra 24 Workstation, 8 GB of RAM, 2.2 GHz quad core
- OpenSolaris 2008.11
- 4 x 1.5 TB Seagate Barracuda SATA II in ZFS zpools (see below)
- For iSCSI test, created a 200 GB zvol shared as iSCSI target (formatted as Mac OS Extended Journaled)
Network:
- Gigabit with MTU of 1500 (performance should be better with jumbo frames).
Average of 3 tests of:
# time dd if=/dev/zero of=/Volumes/test/testfile bs=1048576k count=4
# zpool create vault raidz2 c4t1d0 c4t2d0 c4t3d0 c4t4d0
# zfs create -o shareiscsi=on -V 200g vault/iscsi
iSCSI with RAIDZ2: 148.98 seconds
# zpool create vault raidz c4t1d0 c4t2d0 c4t3d0 c4t4d0
# zfs create -o shareiscsi=on -V 200g vault/iscsi
iSCSI with RAIDZ: 123.68 seconds
# zpool create vault mirror c4t1d0 c4t2d0 mirror c4t3d0 c4t4d0
# zfs create -o shareiscsi=on -V 200g vault/iscsi
iSCSI with two mirrors: 117.57 seconds
# zpool create vault mirror c4t1d0 c4t2d0 mirror c4t3d0 c4t4d0
# zfs create -o shareiscsi=on -V 200g vault/iscsi
# zfs set compression=lzjb vault
iSCSI with two mirrors and compression: 112.99 seconds
Compared with my earlier testing against the Thecus N5200 Pro as an iSCSI target, I got roughly 16% better performance using the Sun Ultra 24 (with one less SATA II drive in the array). -
My backup external hard drive hasn't work since I insalled Snow Leopard. Bad:( I am still learning about my MAC and would just like to re-format the hard dive and set everything up again. I want to upgrade to Lion but can't untill I backup what I.
Read through the links here, calm down and take your time.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents -
I just purchased MAC OSX Snow Leopard Software update to Version 10.6.3. At present my MACBOOKPRO is Mac OS X Version 10.5.8. Since this is the first time I have purchased new software upgrade for my MACBOOKPRO I would like to know before installation if it will keep my documents, etc. intact or would it lose them? Appreciate any help?
Darci13How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s). -
TA48312 Have Mac OS X Leopard (10.5.8) and would like download Mac OS X Lion
Hi, would like to download Mac OS X Lion and I have still Mac OS X Leopard (10.5.8)
Can I download online the new System?The first step in Upgrading... is to Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
Be sure to make a Backup of your Current System Before Upgrading... -
Mac OS X Leopard Server 10.5 - Licence Upgrade (10 Client - Unlim Client)
Hi.
I've bought the Mac OS X Leopard Server 10.5 - Licence Upgrade (10 Client - Unlim Client). But now I realize that I own only the Mac OS X Server Version 10.4. And I do need only the 10 User-Licence.
Is it possible to install just a 10 Client-Version from this Edition? Or do I have to get a new Version?
Bye,
NicoLet me get this clear: you have a copy of Mac OS X 10.4 Server, and bought a 10 user to unlimited user upgrade of Mac OS X 10.5. Is that correct? If it is, then sorry, but you cannot use the 10.5 license upgrade; it's not valid with 10.4 Server (the serial number format is different between 10.4 and 10.5). The 10.5 license upgrade is only usable with a copy of Mac OS X 10.5 10-user edition. So you'll have to purchase a copy of 10.5 10-user, or (if possible) just return the license upgrade and purchase a copy of 10.5 Server Unlimited Users.
If I've misunderstood, please post back and clarify what it is you have and want to accomplish. -
What is Mac OS X v10.5 Leopard like?
I'll like to know what is mac os x 10.5 leopard like and what are great feature that leopard bring for an ibook g4 mid 2005. What are the system requirements for mac os x 10.5 leopard?
Information about your Mac:
http://www.apple-history.com/ibook_g4_mid_05
Mac OS X 10.5 - General requirements:
Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
512MB of memory
DVD drive for installation
9GB of available disk space
Further information:
http://support.apple.com/kb/SP517
Practical note:
It is possible to install OS X 10.5 on a Mac with half the speed, RAM and disk space that Apple stipulate but below 500 MHZ and 1 GB of RAM performance will be considerably impaired. I have used OS X 10.5 on a 733 MHz G4+ with 1.5 GB of RAM for several years and I am very happy with it. My standard install information follows:
Backup first
It is always best to have a full bootable backup before you upgrade. If you fail to do this you will be unable to return to this OS if you decide you don't like the new OS. Also there is a slight chance that an install could lose everything on the Mac. The backup must be to an external hard disk. Preferably use Carbon Copy Cloner to make a bootable backup of the whole disk.
Erase before the install
Once you have a bootable backup on an external disk it is best to erase the internal disk with the new installer DVD before you install.
During the install
Preferably do not import any data or preferences from earlier OSs during the install process as this can reintroduce bugs.
OS numbers and names
OS X 10.4.x - Tiger
OS X 10.5.x - Leopard
OS X 10.6.x - Snow Leopard
OS X 10.7.x - Lion
OS X 10.8.x - Mountain Lion
More about Macs
The Apple History site has specifications for every Mac ever produced: http://www.apple-history.com/
Upgrade to Leopard
Those wishing to upgrade to Leopard should be aware that install disks can be expensive unless you contact Apple. Details: http://lowendmac.com/deals/best-os-x-leopard-prices.html Standard Leopard installers impose several hardware limitations including speed and RAM size but all these restrictions can be overcome. Google for details. Leopard works well at 500 MHz with 1 GB of RAM and many happy users have less than this.
Upgrade beyond Leopard
OSs beyond OS X 10.5.8 require an Intel processor. If in doubt check this: Click the apple at the top left of your screen and select 'About this Mac'. This will give you your OS number. Then click 'More Info' to see which processor you have. If it says PowerPC you cannot upgrade to Snow Leopard and above. If you have an Intel Mac it is well worth upgrading to Snow Leopard now and then considering other options after that. You can buy Snow Leopard here: http://store.apple.com/us/product/MC573Z/A
Upgrade beyond Snow Leopard
Information about upgrading Snow Leopard to Lion or Mountain Lion: http://store.apple.com/us/product/MD256Z/A
Important
Check that your Mac complies with any requirements. If you are not in the US you should use the Change Country link at the bottom of Apple pages. -
SMB Slow connection with upgrade to SnoW Leopard and Windows Clients.
<pre>
Dear,
I have now upgraded my MAC OS X LEOPARD 10,5,8 to new SNOW LEOPARD 10,6,2 and if some problems disappear I have a newer big one !
Now every time a Windows CLient try to connect to a SMB Share of SL server that take a long time about 10-15 seconds to open after that depending on client OS that could be nice for a moment (windows 7 and XP) or browsing stay very slow like for 2003 server connecting to Share on S.Leopard.
Could you please help me.
My SL are the main SMB share computer with all data it is connect like other clients to AD (SBS2003).
I have a SBS2003 server that are Master of Domain
and a Server 2008 acting like Terminal Server also member server of domain.
Here are kind of log I receive from SMBD.LOG: I suppose the Credentials problem when connecting are my explanation but how to avoid that !
2009/11/14 13:37:06, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/smbd/reply.c:reply_special(332)
netbios connect: name1=MACSRV name2=NOMAD
2009/11/14 13:37:06, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/smbd/reply.c:reply_special(339)
netbios connect: local=macsrv remote=nomad, name type = 0
2009/11/14 13:37:08, 2, pid=64794 /SourceCache/samba/samba-235/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/auth/odsam.dylib' loaded
2009/11/14 13:37:10, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/smbd/sesssetup.c:setupnew_vcsession(1273)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
2009/11/14 13:37:10, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/auth/odsam.dylib' loaded
2009/11/14 13:37:18, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/smbd/sesssetup.c:setupnew_vcsession(1273)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
2009/11/14 13:37:28, 0, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/opendirectory.c:getopendirectoryauthenticator(247)
failed to read DomainAdmin credentials, err=67 fd=15 errno=2
2009/11/14 13:37:28, 0, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/opendirectory.c:opendirectoryuser_auth_and_sessionkey(580)
dsDoDirNodeAuthOnRecordType gave -14091 eDSAuthMethodNotSupported
2009/11/14 13:37:28, 0, pid=64803 /SourceCache/samba/samba-235/samba/source/auth/authodsam.c:opendirectory_smb_pwd_checkntlmv1(387)
opendirectoryuser_auth_and_sessionkey gave -14091 eDSAuthMethodNotSupported
2009/11/14 13:37:28, 0, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/opendirectory.c:getopendirectoryauthenticator(247)
failed to read DomainAdmin credentials, err=67 fd=28 errno=2
2009/11/14 13:37:28, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/auth/auth.c:checkntlmpassword(309)
checkntlmpassword: authentication for user fabrice -> fabrice -> fabrice succeeded
2009/11/14 13:37:28, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/vfs/darwin_streams.dylib' loaded
2009/11/14 13:37:28, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/vfs/darwinacl.dylib' loaded
2009/11/14 13:37:28, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/vfs/notify_kqueue.dylib' loaded
2009/11/14 13:37:28, 1, pid=64803 /SourceCache/samba/samba-235/samba/source/smbd/service.c:makeconnectionsnum(1092)
nomad (192.168.2.20) connect to service NetDown initially as user fabrice (uid=501, gid=20) (pid 64803)
I also have some kind of following message:
2009/11/14 13:35:18, 0, pid=64579 /SourceCache/samba/samba-235/samba/source/lib/utilsock.c:readdata(534)
read_data: read failure for 4 bytes to client 192.168.2.20. Error = Connection reset by peer
NOte that initialy I don't have problem with MAC OS Client but to be sure they use SMB I have desactived AFP server on SNOW LEOPARD SERVER and now they can't browse the share in finder but when connection via COMMAND+K and SMB://server/share that give now the same error but a little bit faster than windows clients.
Could you help me to troubleshout that problem ?
Thanks for your help.
Felee
</pre>Dear CarlosGBA,
So when you put 2 computers of your network in WORKGROUP in place of DOMAIN the 38 others works fine ? Strange ?
I have about 15 computers, some are already in workgroup other are linux smb other MAC, the data server are MAC OS X SL, the problem appear for all windows machines, I have try to dissable NTLMV2 and Kerberos since it is probably the faulty element with opendirectory,but always without success !
I don't know what I can do to trouble shout, I hope next release 10.6.3 come soon and correct about all SMB problem ! Probably a dream only ! Since I ask my self if Apple want to correct something andwhy is this problem let without solutionso long ! For a company it is a big problem.I suppose that Apple never read this forum and never answer our problem ! May be I should contact the support phone to be helped !
Thanks for you help. -
Uninstalling Mac OS X Leopard Server or Reinstalling Mac OS X Leopard
I've no longer got any need for a server and would like to uninstall it or install Mac OS X Leopard (not Server) over it. Is there any way to do this retaining as much as possible that's unrelated to the server, also without using an external HD. Thanks in advanced.
Hi
Insert the Leopard Installer Disk for Client OS and at the Installer Stage select the hard drive and select Archive & Install. It's your choice if you decide to Preserve Network Users and Settings. If you don't want to preserve any previous users then simply select Archive & Install.
On successful restart everything including previous users' home folders should be placed in a folder marked Previous Systems. There should be nothing left on the active Client OS that has anything to do with the previous Server OS.
Preserving Network Users and Settings will retain the previous System Admin User account as well as the Network Settings.
I have used the Client OS before in the past to reinstall a clean system on a failing or problematic Server. This allows no wiping of the drive as well as preserving possibly important data. Server OS can then be used to 'upgrade' the client OS. I would recommend a wipe and an install for Server OS although the method described can be useful if you're short of options.
Tony -
Lightroom 2.1 freezes when using new Gradient tool. (Mac 10.5 Leopard)
In the Develop Module, when I click the Gradient tool and apply it to an image, the "Beach Ball" appears and program freezes. When I go to "force Quit" the application, I see: Lightroom (Not Responding).
Running on IMac 24", 2.4 intel, 2GB Ram.I took the plunge and while I've only edited a small series of images - 2.1 RC appears to be usable - thank you, Adobe engineers. I haven't gone hunting bugs, but previously the bugs were hunting me. More like ambushing at every mouse click.
I wanted to quickly mention that this forum has some seriously trigger-happy Adobe defenders. I realize that there are annoying know nothings out there, that don't run well maintained systems and blame the first hiccup on Adobe, Apple, MS or whoever. But sometimes the code is bad. I was pretty unhappy after paying the upgrade and getting what I felt was a useless beta, but the sting in the tail was the pushback on the forum. I don't spend enough time here to know the regulars from the visitors, so maybe it's just the usual wacko brand loyalists dropping by.
Recap: 2 Macs running latest Leopard and LR1 with no probs. Loaned Adobe some $ so they could develop some software while I upgraded to LR2. Beachballs started raining down on me, I troubleshooted on one system, everything short of a system reinstall, LR2 still useless on both. Downgraded to LR 1.4 so I could deliver work to clients. After reading this thread I installed 2.1 RC and no more beachballs on both systems. I feel pretty comfortable on where to assign hiccup blame. I'm blaming myself too, for upgrading. Adobe isn't getting a dime from me for CS4 or LR3 unless Apple 'upgrades' me into it. Stability over features, ALWAYS. -
Wrong atime created by iMac as a NFS client
We have iMac computers in classrooms, and they are running as an NFS client. We have found that the wrong access time (atime) is created by Mac OS 10.5 and 10.6.
A file that is opened by using O_CREATE on the NFS-mounted directory will have the wrong atime. For example, the year will appear as 1920 or 2037 depending on the IP address of the NFS client.
This problem can also be found with Solaris NFS server and EMC Celerra.
The following program will create a file having the wrong atime on an NFS-mounted directory:
#include <fcntl.h>
#include <stdlib.h>
#include <string.h>
#include <stddef.h>
main() {
int fd;
/* O_EXCL option will cause wrong atime */
fd = open("AIZU", O_CREAT | O_EXCL | O_RDWR, 0644);
/* fd = open("AIZU", O_CREAT | O_RDWR, 0644); */
close(fd);
exit(0);
The phenomenon is quite similar to the following problems on FreeBSD reported in 2001:
http://www.mail-arch...g/msg22084.html
If anyone knows a solution to this problem, we would greatly appreciate your advice. Thanks in advance.The solution shown in
http://www.mail-archive.com/[email protected]/msg22084.html
should be applied to the current NFS modules of Snow Leopard. -
Time machine slow in leopard server unlimited client
I installed today the leopard server unlimited client,
The time machine is in "preparing".. and it keepts preparing....
the backup drive is another internal drive.
1)it seems that it has taken a lot of time to backup an operating system disk!
2)maybe I am stupid, but 20 years ago, the scientific computers had versions for file. with that you could avoid all that "time machine" stuff and delays and need to backups.. with versions and an array you get the time machine instantly!.. with out of this waste of hours-time waiting for the " newest time machine".
.. 20 years after, an a bad solution is the top of the mac marketing???
i hope tomorrow the time machine could show more than a "preparing" window...Are you backing-up the clients, or the server, or both?
Like most folks here, I'm not very familiar with the Server product, but I understand TM can do either or both.
You may find better advice in the Server forums, at: http://discussions.apple.com/category.jspa?categoryID=96 -
Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?
If you look at the User Tips tab, you will find a write up on just this subject:
https://discussions.apple.com/docs/DOC-4053
The subject of buying/selling a Mac is quite complicated. Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
SELLING A MAC A
Internet Recovery, and Transferability of OS & iLife Apps
Selling an Old Mac:
• When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
• Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
Internet Recovery:
• In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
• Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
iLife Apps:
• When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
• Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
• It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
SELLING A MAC B
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License. -
HELP !
After I upgraded my operating system on my mac, (from Snow Leopard (10.6 ? ) to Mountain Lion (10.8.2), virtually ALL of my documents (recipes, update logs, information of untold things), have been denied to me with my Microsoft Word for Mac (which I have used since I purchased my mac in Aug.2008).
I now get a window that tells me "You can't open the application "Microsoft Word" because PowerPC applications are no longer supported." (Needless to say, I cannot use Excel or anything else, either!)
Yet, I can still access them, fully (read and even print fro them), individually, by dragging a file into my PREVIEW program!
What gives?
I am not a savvy programmer, nor do I confess to somehow being warned that this might happen when I upgraded my operating system.
Is there any reasonable (easier?) way to continue the use of these (to me) very important files? I only upgraded because I upgraded my iPhone to a 4S and wanted everything to conform to siimilar circumstances!
What can I DO?You need to upgrade your copy of MS Office. You're using a version that is 8 years old (at least). You can buy Office 2011, which will work. You could also get a copy of Pages from the App Store, which is cheaper and will open Word files (though not perfectly). Or you could get a free Office clone, like OpenOffice or LibreOffice.
-
Hi Friends,
I have Macbook Pro 14 Inch INTEL(R) CORE(TM)2 DUO 2.4 GHZ ,4GB RAM, 250 GB HDD, unable to login into MAC OSX Snow Leopard 10.6.3 Version but with Boot Camp i can login into Windows 7 Home Premium, so i would like to clean the HDD and install NEW Version MACINTOSH OS, Which of the Latest OS perfectly workout to install in my MACBOOK PRO, I didnot have LAPTOP Backup disc......Check that your computer is compatible with Mountain Lion/Mavericks.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
our Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
If your computer isn’t compatible, you might be able to upgrade to Lion.
Computer Compatibility - Lion Lion
Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2)
Maybe you are looking for
-
Hello, I'm new to JMS and have been following Suns JMS tutorial here.... [http://java.sun.com/javaee/5/docs/tutorial/doc/bncfa.html#bncfc|http://java.sun.com/javaee/5/docs/tutorial/doc/bncfa.html#bncfc] I followed the example for the Producer / Synch
-
Running Lion, mail search function suddenly stopped working
All of a sudden the search function in my Mac mail stopped working. No emails show up when I begin to search in any of me mailboxes. Still able to search in spotlight but not always effective in finding what I'm looking for. Desperately need to fi
-
I want to be able to receive confirmation sms for various services using Skype Number. Tried sending one from my mobile to my Skype Number to test and it doesn't seem to work. Am I missing something? Thanks for your feedback! Francisco
-
Video Capture device will not start
P$ system runninf XP Home SP1a. The nVidia WDM video capture will not start. Any suggestions?
-
just received a suspicious email requesting information about my checking account. The email was sent from my mac email account. Was my email hacked and how do I fix it?