Mac OS X Leopard Upgrade CD 10.5.1

When I run the installer on the Mac OS X Leopard Upgrade CD 10.5.1, the computer check just after the language check does not detect my operating system, 10.4.11. It does not even detect my hd so I can restart using 10.4.11. I have to restart holding down the Option key. Lucky for me I know that. Any ideas?

Volsav wrote:
When I run the installer on the Mac OS X Leopard Upgrade CD 10.5.1, the computer check just after the language check does not detect my operating system, 10.4.11. It does not even detect my hd so I can restart using 10.4.11. I have to restart holding down the Option key. Lucky for me I know that. Any ideas?
I recall somewhere that if you wait a long time it will find your OS. I recall many of these things when Leopard first came out and usually it was a matter of waiting a very long time.
No guarantee, but if you search this forum you will see those instances I refer to.

Similar Messages

  • Cannot upgrade from Mac OS X (10.4.11) with  Mac OS X leopard upgrade DVD

    I tried to install the Leopard today and I was unsuccessful. I was kept from proceeding to the initial install with a box that said Mac OS X cannot be upgraded to V 10.5 on your computer- Mac OS X v 10.4 or later cannot be found on your computer. At this point I can proceed and I had to quit. I brought my Macbook Pro last October just as the Leopard was being released. I purchased for a very small sum the Mac OS X Leopard Upgrade DVD but i used it today and no success. If anyone can assist me in this matter I would appreciate it. I am up to date with firmware and all other soft ware updates etc. I have also have v 10.5.1,2,3 in a folder ready to be added once I can install the my Leopard DVD

    I posted a few weeks ago stating that I was unable to upgrade.
    I ran Utilities and tried again to no avail.
    I called Apple and they told me to backup everything and do a fresh install. Before doing that, I decided to see if the Leopard Upgrade DVD could see my backup because I created it so that it would be a bootable hard disk.
    It did recognize my external disk, so I clicked on the Utilities application to see if it could see my hard disk and it couldn't. When I got back to the window that allowed me to select a hard disk, suddenly my internal hard disk appeared.
    It worked, and now I'm using Leopard. I don't know if it's a workaround, but it was a lot better than deleting everything off of my computer, installing the new system, and copying it all back onto my internal hard disk.
    I hope someone else will find out that this works for them...

  • Just installed mac osx snow leopard upgrade and connected my printer to it too, and realized I have no sound anymore

    Just installed mac osx snow leopard upgade and connected my printer too, and realized I have lost sound!   Can anyone help?

    In case I misunderstood, did you mean that the 10.6.3 version of Snow Leopard was the upgrade?  If so you need to update via 10.6.6 to 10.6.8.  These updates can correct minor system upsets.  
    And ... did you also repair permissions both before and after you upgraded.   You should do this when you progress via 10.6.6 to 10.6.8 too.

  • Sharpness Control Crashes my Mac after Snow Leopard Upgrade - Help!

    Hi everyone, I have a strange problem since upgrading to Snow Leopard.
    Now, whenever I click on the sharpness control in iPhoto, for any photo, it immediately causes the screen to go haywire and the Mac completely freezes up. The only way I can continue is to hard reset holding the power button.
    On restart, the Mac shows no sign of a crash, the crash reporter does not fire up and there is nothing to indicate a crash in the iPhoto log files.
    All other iphoto controls seem to work fine. I can scroll through my library, everything there is perfect, tone controls, exposure, they all work just fine. As soon as I even touch sharpness, bingo I get an instant lock up.
    Can anyone help as this makes my iphoto basically useless?
    Regards
    David

    David:
    A first fix attempt should be to delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder. Relaunch iPhoto, reset your iPhoto preferences, background color, etc. and try again.
    If that does't help launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select options #3 and #5.
    Click to view full size
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

  • CAN'T SEE SHARED FOLDERS FROM THE PC ON MY MAC SINCE  SNOW LEOPARD UPGRADE

    HELP! Ever since I've installed Snow Leopard on my iMac, I don't see my folders I selected for sharing from the Microsoft PC computer in my network anymore. I can't seem to locate anything. However the PC is able to see the folders from my iMac. If anyone has solutions to this problem, your help would greatly be appreciated.
    Thanks!
    Pat

    Your problem is probably the same one I described in my thread:
    http://discussions.apple.com/thread.jspa?threadID=2133962&tstart=0
    The problem in my case, seems to be that the SL mac is not setting itself as the master browser, so when a Windows PC is switched on, it doesn't update that computer in the finder sidebar.
    You can see if this is the case, by opening terminal, and typing:
    nmblookup -M -- -
    If it comes back with "name_query failed to find name _MSBROWSE_#01" then you've got the same problem as me. With Leopard, my mac would report back as the master browser.
    It's got nothing to do with the firewall (I've tried turning mine off ,to no avail). Also, my workgroup is correct, and smb sharing is turned on for the user.

  • (Slow Network): iSight camera not working in iChat since Leopard upgrade

    I have a different type of iChat video issue. My Power Mac G4, 867 MHz, 1 GB DRAM is a supported Mac for the Leopard upgrade. I've successfully installed OS 10.5.
    Also my Power Mac meets the iChat Conferencing Requirements for 1-on-1 Video Chat per the OS 10.5 system requirements and the application note here:
    http://docs.info.apple.com/article.html?artnum=301050
    My iSight camera is connected via Firewire to an Apple Cinema Display, which feeds back to the Power Mac G4.
    1) When I boot from my 10.3.9 Carbon Copy Cloner backup my iSight works in iChat (at least locally to see myself) without any issue. Green light comes on and shows me locally on video and audio sound bars. Before the OS upgrade the iSight worked fine for live video conferences with iChat 2.1.3 under Mac OS 10.3.9
    2) Running OS 10.5 when I go to iChat 4.0's preferences video pane the following message is waiting "This computer does not support video conferencing."
    3) With Leopard iChat 4.0 the Connector Doctor under "capabilities" says "(Slow Network)" for 1-on-1 Video Chat and won't even show video locally or turn on the iSight's green light.

    Fixed!
    My Power Mac Quicksilver G4, 867 MHz. problem with (Slow Network) in the iChat Connection Doctor, no video preview or video iChat since upgrading to OS 10.5 Leopard and iChat 4.0 has been solved with the following posted towards the end of the thread below. I can finally see my video preview with iChat 4.0 and have also video chatted successfully with one other user.
    Topic : Macbook - iChat says "This computer does not support video conferencing"
    http://discussions.apple.com/thread.jspa?threadID=1197506
    Fixed by Apple Article: http://docs.info.apple.com/article.html?artnum=307035
    Products affected
    Mac OS X 10.5 Leopard
    iChat
    PowerPC-based Mac with a 867MHz processor
    Solution
    Quit iChat.
    Open Terminal (it's in the Utilities folder, in the Applications folder).
    In Terminal type or paste this command on a single line:
    defaults write com.apple.iChat newbwdup 300000
    Press Return.
    Quit Terminal.
    Open iChat.

  • I lost my ability to use Microsoft Offic for Mac, when I upgraded my MAC from Snow Leopard to Mountain Lion! HELP!

    HELP !
    After I upgraded my operating system on my mac, (from  Snow Leopard (10.6 ? ) to Mountain Lion (10.8.2), virtually ALL of my documents (recipes, update logs, information of untold things), have been denied to me with my Microsoft Word for Mac (which I have used since I purchased my mac in Aug.2008).
          I now get a window that tells me "You can't open the application "Microsoft Word" because PowerPC applications are no longer supported." (Needless to say, I cannot use Excel or anything else, either!)
          Yet, I can still access them, fully (read and even print fro them), individually, by dragging a file into my PREVIEW program!
          What gives?
          I am not a savvy programmer, nor do I confess to somehow being warned that this might happen when I upgraded my operating system.
         Is there any reasonable (easier?) way to continue the use of these (to me) very important files? I only upgraded because I upgraded my iPhone to a 4S and wanted everything to conform to  siimilar circumstances!
         What can I DO?

    You need to upgrade your copy of MS Office. You're using a version that is 8 years old (at least). You can buy Office 2011, which will work. You could also get a copy of Pages from the App Store, which is cheaper and will open Word files (though not perfectly). Or you could get a free Office clone, like OpenOffice or LibreOffice.

  • I am new to mac's and have upgrade from Snow Leopard to Lion but......

    I am new to mac's and have upgrade from Snow Leopard to Lion but not all my application will work. Is it save to reinstall using original snow leopard dvd and does it wipe all my other application like apature? I am in a panic over this, any help!!
    I came across this online and i want to know is it safe to do this:
    Backup your User folders to an external drive. This should preserve your documents, photos, music, etc. If you store those things in locations not in the User folder, make sure to copy those over too.
    Insert the Snow Leopard disc. Restart your Mac and hold down C to boot to your DVD drive.
    Go to Utilities in the menu bar once the installer pops up and select “Disk Utility.”
    Find the drive in the sidebar where Lion is installed, select it and navigate to the Partition tab.
    Click on the drop down menu under Partition Layout and select “1 Partition.” Hit Apply.
    Now navigate to the Erase tab and make sure “Mac OS Extended (Journaled)” is selected, then hit Erase to delete all data on the drive.
    Quit Disk Utility to get back to the Snow Leopard installer and proceed with the install.
    Restore your User folder and documents from your backup.
    Run Software Update to get everything current, install your apps from your original install media and update those as well.
    if any one can help me that would be great, thanks Mike

    Before you do that why not do this first:
    Repair the Hard Drive and Permissions
    Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    To boot from the Recovery HD restart the computer. After the chime hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    If this doesn't help, then you can proceed to reinstall Snow Leopard as follows:
    Downgrade Lion to Snow Leopard
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard. I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
    This will erase the drive so be sure to backup your files before doing this.

  • Can Photoshop 7.0 be used to upgrade Photoshop 6.0 on a Mac G5 with Leopard 10.5.8 ?[was: gonzo1944]

    Can Photoshop 7.0 be used to upgrade Photoshop 6.0 on a Mac G5 with Leopard 10.5.8 or will it not work unless it is in the Classic envoirnment?

    To R. Kelly.....I am old school in Mac, I love my G5...I do have a Bachelors degree in Electronic Publishing, but I graduated in 95'...so, not meaning to bore you...I do have Photoshop 6.0 and was unaware, though I purchased Leopard throught the Mac store, that the classic would no longer be available. I do a great deal of work in Photoshop and Illustrator and I guess my main question is....where do I go from here?
    I know that CS-5 Photoshop is a whole new program and I checked with Adobe and on Amazon and it is not cheap, I know enough to deal through an authorized dealer...My Mac is a power PC G5 that I purchased in 2005. What version of Photoshop do I need to purchase so that it is compatible with leopard?  I have much work piled up to do and this would help me greatly.
    Thank you for your help and any help you can provide for me,
    Dennie

  • I have a mac os 10.5.8, i want to upgrade to mac os snow leopard, can i keep all my files (documents, music on itunes) without backing up all the files first on a external device prior to the upgrade?

    I have a mac os 10.5.8, i want to upgrade to mac os snow leopard, can i keep all my files (documents, music on itunes) without backing up all the files first on a external device prior to the upgrade?

    I strongly advise against upgrading the OS without first making a backup. Were something to go wrong you would lose all your files without the backup. See:
    How to Install OS X Updates Successfully
    A. Repair the Hard Drive and Permissions:
    Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally. 
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    C. Important: Please read before installing:
    If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
    You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
    The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update.  While the installation is in progress do not use the computer.
    D. To upgrade:
    Purchase the Snow Leopard Retail DVD.
    Boot From The OS X Installer Disc:
    Insert OS X Installer Disc into the optical drive.
    Restart the computer.
    Immediately after the chime press and hold down the "C" key.
    Release the key when the spinning gear below the dark gray Apple logo appears.
    Wait for installer to finish loading.
    E. If updating:
    Download and install update(s) 
    Use Software Update, or
    Download standalone updater(s).

  • I need to upgrade to mac os snow leopard from 10.5.8, and have the lion OS usb. I can't upgrade to snow leopard as my father doesn't remember the admin password.  If anyone can help it would be appreciatedeas

    I need to upgrade to mac os snow leopard from 10.5.8, and have the lion OS usb. I can't upgrade to snow leopard as my father doesn't remember the admin password.  If anyone can help it would be appreciated

    Restart with the Mac OS X 10.6 DVD in the drive or with the Lion USB drive connected, hold down the Option key just after the restart, tab to the installation disk, and press Enter. If the computer has a firmware password set, it needs to be provided for this to work.
    (66822)

  • Upgrading to Mac OS X Leopard on MacBook Pro

    I am running Mac OS X Leopard on MacBook Pro. What is the best way to upgrade to Mac OS X Mountain Lion? Should I purchase both Snow Leopard and Lion or just Snow Leopard?

    Repeats some of the above.
    Upgrade to Mountain Lion.
    Upgrade to Snow Leopard, then update to 10.6.8      Snow Leopard Purchase                         Mac OS 10.6.8 Combo Updater
    Check that you computer is compatible with Mountain Lion.
    To check the model number hold down the option/alt key, go to the Apple menu and select System information.
    iMac (Mid 2007 or newer) model number 7,1 or higher
    MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
    MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
    MacBook Air (Late 2008 or newer) model number 2,1 or higher
    Mac mini (Early 2009 or newer) model number 3,1 or higher
    Mac Pro (Early 2008 or newer) model number 3,1 or higher
    Xserve (Early 2009) model number 3,1 or higher
    Your Mac needs:
    OS X v10.6.8 or OS X Lion already installed
    2 GB or more of memory
    8 GB or more of available space
    Model Numbers                  Computer Compatibility - Apple 
    Check to make sure your applications are compatible.         Application Compatibility
    If you have applications that you want to use that aren't compatible, you can retain Snow Leopard and create a new partition to install Mountain Lion on.
    If your computer isn't compatible, you might be able to upgrade to Lion.        Computer Compatibility - Lion
    If you can/do upgrade, I recommend you make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again.

  • The favicons of my bookmarks have disappeared since I upgraded Firefox (Mac OS X Leopard 10.5.8). What can I do ?

    The favicons of my bookmarks have disappeared since I upgraded Firefox (Mac OS X Leopard 10.5.8). What can I do (the responses for OS Lion don't work) ?

    Hey Richardkep,
    Take a look at [https://support.mozilla.com/en-US/kb/latest-firefox-issues#os=mac&browser=fx9 this article]. It discusses some of the known issues with the newest build. There are steps in there that should help resolve your issue.
    Hopefully this helps!

  • Mac OS X Leopard - Contribute Upgrade

    Does anyone know of an upgrade for Contribute on Mac OS X
    Leopard?
    thanks

    Hi,
    Contribute CS3 works fine on Leopard.
    Thanks,
    Manoj

  • Mac OS X Leopard Server 10.5 - Licence Upgrade (10 Client - Unlim Client)

    Hi.
    I've bought the Mac OS X Leopard Server 10.5 - Licence Upgrade (10 Client - Unlim Client). But now I realize that I own only the Mac OS X Server Version 10.4. And I do need only the 10 User-Licence.
    Is it possible to install just a 10 Client-Version from this Edition? Or do I have to get a new Version?
    Bye,
    Nico

    Let me get this clear: you have a copy of Mac OS X 10.4 Server, and bought a 10 user to unlimited user upgrade of Mac OS X 10.5. Is that correct? If it is, then sorry, but you cannot use the 10.5 license upgrade; it's not valid with 10.4 Server (the serial number format is different between 10.4 and 10.5). The 10.5 license upgrade is only usable with a copy of Mac OS X 10.5 10-user edition. So you'll have to purchase a copy of 10.5 10-user, or (if possible) just return the license upgrade and purchase a copy of 10.5 Server Unlimited Users.
    If I've misunderstood, please post back and clarify what it is you have and want to accomplish.

Maybe you are looking for