Mac OS X/Mac OS 9

I have an iMac G4 (700 MHz) running 10.4 Tiger on a 40GB HD.
I want to be able to run OS 9 on this computer too. So my question is, do I need to partition my harddrive for that? Will all data on the computer be deleted if I partition it?
And I only have Mac OS 9.2.1. Is that enough? Or do I need 9.2.2?
Thanks for the help!

If you have an iMac G4 9.2.1 or 9.2.2 installer CD, that can be used to install Mac OS 9 on your system without partitioning. The retail Mac OS 9 which looks like * will not work on an iMac G4/700 Mhz, If you want to ensure that your Mac OS 9 is bootable, and not only usable in Classic, the hard drive needs to be reformatted with Mac OS 9 drivers as describes here:
http://support.apple.com/kb/TA26834?viewlocale=en_US
To tell if you have Mac OS 9 drivers already installed, follow these directions
http://discussions.apple.com/thread.jspa?threadID=1753754&tstart=0
by eww posted right after my post:
Select "About this Mac" from the Apple menu and click the More Info... button. Click "ATA" in the left pane of System Profiler when it opens, and locate your hard drive in the right pane. Below the hard drive manufacturer's product or model number, you'll find several lines of information about the drive. One will be "OS 9 Drivers". If "No" appears next to it...
follow the directions in the link to install Mac OS 9 drivers mentioned earlier and only after backing up your data.
- * Links to my pages may give me compensation.
Message was edited by: a brody
Message was edited by: a brody
Message was edited by: a brody

Similar Messages

TS2530 When I put a burned cd from one Mac into another Mac, song titles do not show up! I have to enter them manually! My CD player reads the titles that i on the cd; how can I get my Mac to do so?

When I put a burned cd from one Mac into another Mac, song titles do not show up! I have to enter them manually! My CD player reads the titles that i on the cd; how can I get my Mac to do so?

The problem is that I burned these CD's myself from music that I added from my personal collection to iTunes. The INFO is ON the CD's (it appears perfectly when I put the CD in my Numark mixer...so I know the info is on the CD), but for some reason, my MAC PRO will NOT read the info on the burned CD when I place the CD into the MAC PRO. The CD was burned on a MAC that I no longer own. But there HAS to be a way to transfer songs from a burned CD with the INFO that is on the CD burned with iTunes.
PLEASE HELP!
-Old Appel

I am going to buy either a Mac Air or Mac Pro Retina 8GB RAM and 256GB. And as I have to still run Windows I will install Parallels 9. As the Mac are both 64bit machines does that mean I need to install Windows 7 64bit ? And office pro 2013 64 bit too?

I am going to buy either a Mac Air or Mac Pro Retina 8GB RAM and 256GB. And as I have to still run Windows programs I will install Parallels 9. As the Mac are both 64bit machines does that mean I need to install Windows 7 64bit or just install 32 bit? (Going with Win7 as I hate Win8). And I will install Office Pro 2013 64 bit too or 32 bit or is that automatically selected by the underlying OS (I use Word, Excel and Access mainly for a membership database of a local club) ? I am not a power user so would appreciate advice on way to go

Again thank you. If I only use word, excel and access in the Win environment and Mac OS for email and safari for internet do I need anti virus software . Ie my connection to the world is mac only and I use office pro only to ruin the club, newsletters, membership database etc. and of course anything I do there can drag/drop to the mac environ to email. That's my understanding anyway. Next will my existing .pst file copy directly into mac mail or do I have to runs translator as I recall reading something about that ages ago when I started thinking Mac

HT204350 I have a Mac Book Pro with 10.6.8 and want to back up my files using a flash drive. It says I did it but when I tried to check on my other Mac - an I Mac with 10.5.8, thedata does not seem to be there. I cant see photos, etc.

I have a Mac Book Pro with 10.6.8 and want to back up my files using a flash drive. It says I did it but when I tried to check on my other Mac - an I Mac with 10.5.8, thedata does not seem to be there. I cant see photos, etc.. It shows the backup as a file and shows various system info. but there are no photos or other files shown.
Thanks for any advise.
Mike

A PowerPC Mac, if that's what it is, won't be able to see an Intel Mac's formatted data. Also ExFat formatting is not supported by 10.6.3 or earlier. I would try viewing the backup on another Intel Mac with at least 10.6.4. If it isn't there, then the backup never really took place. I much profer a hard drive with Carbon Copy Cloner.

How do I move a purchased movie from one Mac to an Mac Air using iTunes

How do I move a purchased movie from one Mac to an Mac Air using iTunes

You should start "Home Sharing". You will need to authorise your two computer. Once Home Sharing is activated, you will see shared iTunes libraries and it will allow you to simply drag'n drop any content.

HT201250 how can i pass information from one mac to another mac by using the time capsule

how can i pass information from one mac to another mac by using the time capsule

If you want to transfer files, settings, etc., you must open Migration Assistant (Applications > Utilities) in the Mac that you want to transfer the files and follow the instructions

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration...

HT4818 hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx

hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx after I install windows. ( can I switch between Windows and OS X as many times as I want.) thanks for answering.
Sebastian

hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx after I install windows. ( can I switch between Windows and OS X as many times as I want.) thanks for answering.
Sebastian

HT4557 how do i copy a shared itunes library (from a mac) to another mac

I have activated home sharing on both macs. I pick up itunes library from mac 1 on itunes of mac 2, but i can not seem to compy the songs from mac one to mac 2's itunes.

http://support.apple.com/kb/HT4527

How can i transfer a iphoto book created on one mac to another mac.

how can i transfer an iphoto book created on one mac to another mac. i am aware of pdf saving but it doesn't help! need to see the iphoto book on other mac.
and how can i view in slide-show double pages instead of single pages?
anybody has an idea?

Stephan:
If you want to be able to view the book with iPhoto on the other Mac you'll have to copy the library containing the book to the other Mac. You won't be able to import that book into the other library.
Make a duplicate copy of the library containing the book and rename the folder "Book Library". Open it with iPhoto and delete all of the files that are not in the book. Then copy the Book Library folder to the other Mac and open. You can also burn the Book Library folder to a CD as a way to archive the book in case you decide to order another copy at a later date. I create a separate library for each book I create and order and archive it to CD when I've ordered.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Mac Book Pro - Mac Mini; sharing stopped working after IP/Net change

I apologize in advance for the length of this, I've got a complex issue that I've been unable to diagnose with the usual published notes...
I have a Mac Book Pro and Mac Mini. I previously had sharing and screen sharing working between both systems.
About a month ago I switched internet providers (to AT&T U-verse) and their router required me to make major changes to my internal network as listed below.
Since those changes the Mac Book Pro can not access the Mac Mini in any way via Finder options, but still shows it in Finder->Sharing. I can access the Mini via shell access (telnet/ssh, ftp, www) but nothing via the normal automatic Bonjour type accesses (file sharing, screen sharing).
Conversely, the Mac Mini has no difficulty accessing the Mac Book Pro in any way.
List of the significant changes that were made:
1) My main router was replaced by the AT&T router.
2) The AT&T router does not allow any fixed IP addresses within the network, requiring all of my network shemes to get re-done (I used a mix of fixed and DHCP previously).
3) The IP range changed for all computers due to the router.
4) Both Mac Mini and Mac Book Pro were and still are on DHCP.
5) The Mac Mini's wireless was disabled and it was plugged directly in to the Ethernet port on the main router.
The behavior of the system is as if the Mac Book Pro is locked on the old IP address (but only in the context of the Bonjour services). Although I can't prove this, there was a brief period where both the old and new router and ethernet and plugged connections were all active on the same network and during this period the Mac Book Pro accessed the Mini without difficulty (the old IP was bound to the wireless port on the Mini).
Unfortunately it wasn't until after I had exchanged this other router that I realized that things were not working correctly.
Another unusual clue, the Sharing used to say use afp://<mininame> to access from Windows and now it says afp://QVT_529. I have to assume this is something to do with the DHCP from the AT&T router but all of the AT&T system screens show the <mininame> properly bound to the active DHCP port and nothing hinting at what the QVT_529 references. Going to this address fails and I can't ping it from terminal.
I've been scouring the net for the last month trying different things with absolutely zero results on any front. All settings check out perfectly. No firewall changes were made. No evidence that anything is out of place.
However, I can still only connect in one direction. It just doesn't make sense.
Some things I don't know that I think might help me resolve the issue:
1) Any recommendations with how I might be able to get a better view of what Mac Book Pro might be trying to connect to via the Finder->Sharing link to the computer?
2) Any way to probe the Mac Mini's file or screen sharing features from the terminal (going around the Finder link)?
3) Any possible issues with local networks that might interfere with these services? (there are several switches/hubs between and other devices on the network, but everything checks out at the IP flow level)
Thanks in advance,
Barney

This is just a stab in the dark since I haven't run into this and I don't know all the steps you have taken (or researched.)
It seems to me that since it is working right from the mini->MB Pro, then the problem should reside on the mini's broadcast side or the mini's OSX firewall. If your firewall is set correctly (as you said), my guess would be that network or firewall preferences have been corrupted by combining multiple, conflicting settings for the same preference due to hardware changes. If I was experiencing this (assuming that every setting on the routers/switches and the firewalls (router/OSX) etc were 100% correct), I would create a new user account and verify that the problem is still manifesting itself. If this solves the problem, I know it is the user account that is messed up and not the OS. If this doesn't solve the problem, I turn off any sharing services, delete the resident Locations (by the drop-down menu in the Network System Preference) as well as the list of Connections (left pane of Network SP) and restart the machine. I then set-up new network, sharing services and firewall settings after the restart. This has solved all of my network sharing issues on my equipment, home and work. (Permissions not with-standing.) If this hasn't solved my problem, my next step would be to reset NVRAM, PRAM and clean system caches (using OnyX.) Reinstall of OSX commences then. I don't know enough of UNIX to be comfortable in terminal so if my steps above failed, I would be coming here to ask or, if I thought the problem resided on non-Apple hardware, the offending hardware support channels.
I don't know if this helps, but I hope so.
D.

How can I get music from old mac to new mac?

How can I get music from old mac to new mac please?
Can't seem to make Migration Assistant work. Doesn't ask about or transfer files.

I just migrated into a new MBP from an old one.
It did not bring the music over. Apple's instructions are to use the Home Sharing feature of iTunes.
Open iTunes on your old Mac. Select Home Sharing under the Advanced menu. Sign in. Do the same on your new computer. Then when the library appears under Home Sharing on the left-hand panel on your new computer's iTunes, you can select all and Add To Library.
That's what Apple says, anyway.

How can I see my Mac in another Mac?

How can I see my Mac in another Mac?
I mean, I have a Mac in the office and a Mac at home. Is it possible not to carry mine, just to connect it to the office's one? Thank you very much

"Sharing" the way Mac OS X uses it means giving permission for others to use something. Once Sharing something is enabled, you just use the thing that has been Shared.
To access your Mac at work from the Internet would require changing the configuartion of the Router at work to allow port-forwarding.
OS X Lion: Share your computer’s screen using Back to My Mac

My airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

my airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

What model is your TC? What is the firmware?
I recommend you do a factory reset and use short names.. not apple recommended names.
Short.. 2-20 characters .. less than 10 even better.
No spaces.
Pure alphanumeric.
Set fixed channels for 2.4ghz wireless.. test with 11, 6, 1 at least.
That often helps.. if not and is old, ie Gen1-4 go back to 7.6.1 firmware which is far more solid.

Connect mac client to mac printer share across subnets

I need to share printers from a Mac. I need to connect
Mac clients on different subnets to the Mac shared printers. I installed
a Mac mini, connected to printers via HP JetDirect Socket (port 9100), and
shared them. I was able to print from the Mac mini, and connect Mac
clients on the same subnet to the shared printers with Bonjour and print.
I moved the Mac mini to its intended location on another subnet. I
immediately learned that Bonjour does not publish services across
subnets. I could not find documentation on how to connect to a Mac shared
printer across subnets, but I did find some third party documentation (only some incomplete
documentation from Apple) on how to implement DNS-SD Service Discovery. I
enabled DNS-SD and was able to publish the printer shares across subnets, but I
was still unable to connect to the printer shares from a Mac client. I
found some third party documentation (none from Apple) on how to manually connect to a Mac
printer share by specifying the IP address of the server, specifying the CUPS
default IPP protocol, and the print queue name. I was unable to connect
to the shared printers. I receive ping replies from my Mac mini, and port
scan reveals that port 631 for IPP, CUPS default, is open. Printer
sharing is configured so everyone can print. I am able to connect to the Mac
mini with VNC Screen Sharing. I don’t see how this can be a network
issue.
Macs don’t seem to like to connect to our Windows
shared printers because of our PaperCut software, and connecting Mac clients to
Windows printer shares and authentication is beyond the average user,
exacerbated by Macs not behaving the same as Windows when bound to an Active
Directory domain.
I called Apple support, they escalated to Apple Enterprise
support. Apple Enterprise support said they couldn’t help me beyond a
single network with no subnets, but Apple Engineering might be able to solve
the problem for $695.
Why do I need to pay $695 to learn how to connect Mac
clients to Mac shared printers, something that should be easy and intuitive and
have documentation readily available? Windows printer sharing is easy and
intuitive and documentation is readily available, and services are published
across subnets without have to implement DNS-SD.

Thank you for your reply. I followed the instructions in the sybaspot.com site and in some of the included references to set up DNS-SD. DNS-SD worked, but I couldn't connect the Mac client to the Mac shared printers.
I also found http://www.papercut.com/products/ng/manual/ch-mac-printing-10-8-9.html#ch-mac-pr inting-10-8-9-sharing-printers.
I expanded my search and found this: http://support.apple.com/kb/PH13940, last modified May 8, 2014. I started work on my project February 2014. Apple Support could have told me about this document.
PH13940 says: "The computers must be on the same local network as your Mac". Apple must not consider multiple subnets one network.
PH13940 says: "Printer sharing is for printers attached directly to your Mac. You don’t need to share network printers, because they are already shared on the network."
Apple must define "network printers" as any printer with a network interface. Microsoft defines network printers as printers shared by another computer. TCP/IP ports are local ports on a Windows computer, so TCP/IP connected printers are local printers that can be shared. Multiple users on a Mac all see the same connected printers. Multiple users on Windows all see the same local printers, but network printer connections can be different for each user.
Apple must not see any value in accounting for printing and assigning the cost to the user or department. We need to account for printing and cannot have any users bypassing the system by printing directly to printers. I have created Access Control lists on the printers to limit connections to the specific IP addresses of our print servers.
The documents about setting up DNS-SD and IPP connections must have assumed USB connected printers on a Mac. The odd thing is that I was able to share a network printer from the Mac mini when the client Mac was on the same subnet. Is PH13940 wrong?
I am Microsoft Certified Systems Engineer 1999 and Apple Certified Technical Coordinator 2013.

How do I control my mac from another mac not in the same network?

How do I control my mac from another mac not in the same network? Thanks

You can do it manually, but it is much simpler if you use a tool such as Back To My Mac, LogMeIn, or something like that. Those programs enable you to connect to your computer through your router without you having to adjust the router settings manually.

Mac OS X/Mac OS 9

Similar Messages

Maybe you are looking for