Mac os x mountain lion code... where do i enter it?

Where do I enter the code the apple just sent me for free upgrade? Please help by sending the link.

If you have the shorter code that you got after entering into the PDF, start the Mac Apple Store, click on redeem and enter the code.

Similar Messages

Where do i enter my osx mountain lion code?

I have recieved my activation code from Apple for OS X Mountain Lion. Where do I go (whats the link) to enter this code and upgrade to save me $20?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
1. Open the Mac App Store.
2. Make sure that you are signed into your account in the Store menu.
3. Clcik the Redeem link in the Quick Links on the right hand side of the Featured pane.
4. Enter the code to redeem and begin the download of the Mt Lion installer.

I have a new Mac Mini with Lion. I am entitled to a free copy of Mountain Lion. Where do i download it from?

I have a new Mac Mini with Lion. I am entitled to a free copy of Mountain Lion. Where do i download it from?

http://www.apple.com/osx/uptodate/

Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.

Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.
Thank you for all of your answer.

I've seen it mentioned on here that a PRAM reset may solve it:
Reset PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P and R.
You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

What do I do if the Mac App Store won't except my code for the OS X Mountain Lion code?

What do I do if the Mac App Store won't except my code for the OS X Mountain Lion code?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Contact the folks that sent you the code or AppleCare for assistance.

Where can I find the download for Mac OSX Server Mountain Lion ?

Where can I find the download for Mac OSX Server Mountain Lion ?

On the App Store. Search for it:

I request the code for the exchange of Mac OS X Mountain Lion, on 25 July and still I do not get the validation email, what should I do? :/

request the code for the exchange of Mac OS X Mountain Lion, on 25 July and still I do not get the validation email, what should I do?
ANYBODY HELP ME!!

same problem here.....
anyone can help?

How do I change a port in Mac OS X Mountain lion

Apparently Logmein makes use of port 2002 in mac OS X Mountain Lion. I need to use that for some new accounting software. How do I change the part in Mountain Lion and how would I do an install of Logmein on the computer to use another port or how, with Logmein currently installed do I change from port 2002 to some other port. The major question is how do you change port assignments in OS x Mountain Lion?
Thanks for you help.
Tom in Dallas

There isn't a generic way to do what you want. Not on Microsoft Windows. Not on OS X.
The ICANN registry of port numbers exists so that these messes don't happen, or don't happen very often. So that there are no port conflicts among various applications, and there are ways to request ephemeral (temporary) ports, and (for some applications) to find out which port(s) the application happens to have allocated and is using. In this case, it appears that folks at LogMeIn and with the accounting software didn't avail themselves of the ICANN port database. They're using the preferences mechanism as a work-around for that.
Have a look at ipfw and pfctl tools here (see man ipfw and man pfctl at the Terminal.app prompt), and see if you can figure out how you're going to map just one local application that's opening 2002 to some other port, without disturbing the other application that's mapping to that same port (and colliding). This is the remapping mechanism and akin to what can happen at some firewalls, and not the requested control over the selected port. It's not set up to remap local application conflicts.
The selected port is either a configuration option within the specific tool, or it's hard-coded within the tool. There's no generic registry of applications and ports. That's what the ICANN port registry is for.
The worst-bad-ugly approach is to dump out the executable code, reverse engineer it, and patch the preferred port right into the code; to change the code without using the original source code. Or some tool-specific configuration file or preferences setting, as and if available.

Photoshop elements 5.0 on mac OS X mountain lion?

Is it possible to install photoshop elements 5.0 on my mac OS X mountain lion? I found a cd with photoshop elements 5.0 on which it said mac but when i tried to install it, some kind of error showed on the screen, but it was only after a little while.

No way. This would require PPC code which Apple long have removed from OSX.
Mylenium

Mac os x mountain lion rounds photos on the corners...

Mac os x mountain lion rounds almost every photo on the corners, how can I undo this weird process, affecting only raw files from my Sony RX100? Thanks

there are still some Applications that I Have that need Updating but Apple Mac App Store has not Appoved them yet??
Hi Byron,
There is a new safety feature where the third party apps need to be approved by the app store to make sure they're ok. But, you can get around that by hitting the Control key while launching the app - you'll get a menu where you can choose for it to open. That overrides the new feature. Or, you can also go into the Security & Privacy Pane > General in System Preferences and choose "anywhere" instead of approved developers and then you can download anything.

What is good greeting card software for my mac mini with Mountain Lion OS X 10.8.1? I want a wide range of existing templates such as Hallmark and Printshop offer, but can't find for this version OS X.

For my Mac mini with Mountain Lion OS X 10.8.1, what is a good greeting card software download with lots of templates and graphics?

Hi simon2010,
as far as I can see, I have resolved it...
Just so I didn't write over my functioning disk in the Mac mini, I took it out and put a spare one in. (Would have saved me going back to the Apple store to get it re-imaged if it did fail.)
I created a Mountain Lion installer on an 8GB USB stick, and first installed 10.8.4 (the latest at the current time) on my MacBook Pro... it worked fine, so I knew the installer stick had no problems at all (that's one thing to rule out of the list of potential causes).
With my spare hard disk in the Mac mini, I then went to try to install 10.8.4 on it, with my 16GB non-Apple RAM in it. It failed as usual in the way I expressed originally.
I then just swapped my 16GB RAM for the original Apple 4GB RAM (2x2GB sticks) which I put back in the machine, and I tried re-installing. No problem whatsoever - it installed perfectly.
It's the RAM! Even though my RAM works perfectly once installed, the Apple OS installer refuses to proceed if Apple RAM is not in. I put my 16GB RAM back in after installing the OS and all is fine.
I'm quite surprised Apple has done this.
Have you changed the RAM? Let me know if it's the same problem or you have some differences.
I assume it will install fine if I put the orignal HD back in, again if I have the original Apple RAM in of course.
PS. Also to note, the point where it failed in the installer with my 16GB RAM in, with the original Apple RAM in it took an incredibly long time towards the end of the bar moving across the screen; it says "5 minutes remaining" for at least 15, maybe 20 minutes, but gets past it eventually, then does a reboot to continue its install.

Mac OS X Mountain lion bug sometimes the programs don't like to lunch and I unplug the power cord what shall i do

Mac OS X Mountain lion bug sometimes the programs don't like to lunch and I unplug the power cord what shall i do

Here are some suggestions for getting the best results from this site.
If you're not comfortable with English, it may be best to post in your native language. Others can use automatic translation, if necessary, to help them understand you. They may reply in their native language, and then you can do the same to understand them.
Google Translate
Screenshots can help overcome a language barrier. To upload an image, click the camera icon in the message editor on this page.
Give details of the problem. A statement such as "it doesn't work" conveys no information. If it did work, you wouldn't be here. Instead, you should post something like this: "I did A; I was expecting B; but I got C instead." Include the complete text of any error messages you saw and where you saw them: in an application window, a CrashReporter window, a log, or whatever. Also include the steps you’ve taken yourself, if any, to try to resolve the issue. If the problem is of recent origin, did you make any changes to your setup just before you first noticed it? Is the problem reproducible or intermittent? That is, does it always manifest itself when you take a certain action, or only at unpredictable times?
Before posting, ask yourself whether it’s likely that you are the the only person ever to have had this problem. If not, search the discussions for answered questions similar to yours. If you found any pertinent information, but it didn't help, include details.

Created three new users without Apple IDs and they can't log into either of my Macbook Pro or Mac Mini running Mountain Lion.

I have created three new users without Apple IDs and they can't log into either of my Macbook Pro or Mac Mini running Mountain Lion. These accounts are for my kids and originally were setup with parental controls and time constraints. Thinking this was the problem I removed the time constraints, removed the parental controls, deleted and re-added them, and made them standard users. I have reinstalled, used disk utility to repair permissions, and made them admins. Any help is appreciated.

Users don't need Apple ID's. That's not the issue. Have you tried repairing permissions their accounts?
http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/
Repairing User Permissions in OS X Lion
You’ll need to reboot to perform this, and then use the same resetpassword utility that is used to change passwords in Lion, but instead choosing a hidden option.
When you use the Disk Utility app and Repair Permissions — it doesn’t actually repair the permission settings on folders and files in your Home folder where your documents and personal applications reside.
In Lion, there is an additional Repair Permissions application utility hidden away. This tool is located inside boot Repair Utilities. Here’s how to access it.
Restart Lion and hold down the Command and R keys. You will boot into the Repair Utilities screen. On top, in the Menu Bar click the Utilities item then select Terminal.
In the Terminal window, type resetpassword and hit Return.
The Password reset utility launches, but you’re not going to reset the password. Instead, click on the icon for your Mac’s hard drive at the top. From the drop-down below it, select the user account where you are having issues.
At the bottom of the window, you’ll see an area labeled ‘Reset Home Directory Permissions and ACLs’. Click the Reset button there.
The reset process takes a couple of minutes. When it’s done, quit the programs you’ve opened and restart your Mac. Notice that ‘Spotlight’ starts re-indexing immediately.

Why does IPhoto create duplicates of photos and graphics that is on my Mac when I import Photostream. I started out with 4000 photos now I have almost 28,000. I am using new Ipad and the Mac is running Mountain Lion

Why does IPhoto create dupicates of photos and graphic that is on My Mac when I import the photos from Photo stream to the library? I started out with about 4,000 photos when I transferred everything from my PC. I use a new IPad and IPhone to take the photos. The Mac is running Mountain Lion 10.8.2 3.1 Intel prosessor. I am using IPhoto 11.
Thanks in advance
Barry

there is an app called daisydisk on mac app store which will help you see exactly where the memory is focused and consumed try using that app and see which folders are using more memory

Is there a way to run Internet Explorer on a Mac mini with mountain lion?

I need to access a professional website that only works with IE (don't get me started on THAT) I need to do billing using this site so need to have full functionality. Is there a way to run IE on my mac mini with mountain lion?

The key takeaway here is that yes, you can access Windows 7 (and IE 9) from OS X Mountain Lion.
The crucial question is about your workflow. If you need concurrent access to both Windows 7 and Mountain Lion, then the Bootcamp solution included with Mountain Lion would not be the right choice. You would need one of the virtualization solutions.
If you need helpdesk support from a paid product, rather than entirely from a community forum, then the latest Parallel's Desktop or VMware would be a matter of choice, with Parallel's the better decision at this point. Either of these products are under $100, in addition to the cost of a Windows 7 license. You may need the Windows 7 installation media as an .ISO file, rather than on DVD. Check requirements.
By example, I use Oracle's VirtualBox (free) on Mountain Lion, with a Windows 7 Home Premium 64-bit guest. The interactive and network performance of this Windows guest are more than adequate on my 2011 mini. I assigned 3 GB memory and 2 of 4 processor threads to the Windows 7 guest. I also restricted guest CPU use to 80%. VirtualBox is installed on my SSD, but the Windows guest is on an external HDD. That is not a default configuration. There are multiple choices for display; from full-screen 1920x1200 (mine) to an isolated resizeable window, to seamless integration with OS X. The Apple keyboard, bluetooth devices (trackpad/mouse), and printer all are recognized. I also have a shared OS X folder with VirtualBox, and copy/paste integration.
I use VirtualBox as it meets my support (forum) and functional requirements.
Best wishes,

Mac os x mountain lion code... where do i enter it?

Similar Messages

Maybe you are looking for