Mac OS X PPC to Mac OS X Intel - cross upgrade?

Hi, I just switched from a PPC Powerbook to a new Macbook, I bought a copy of OS X Tiger a couple of months back for my Powerbook (I like to have the actual OS X disk to make bootable partitions of my external backup hard drive)... is there a cross upgrade program so I can switch my PPC OS X DVD for an Intel DVD?
Macbook Mac OS X (10.4.6)

Presently the Intel version of OS X is only available as the distribution DVD that came with your Intel Mac. You cannot boot an Intel Mac using the retail distribution of Tiger nor can you boot a PowerPC Mac with the Intel version of Tiger.
Also, Intel Macs require a different partition scheme than PowerPC Macs. In order to boot an Intel Mac a hard drive must be partitioned using the GUID partition scheme (an option in the Intel version of Disk Utility.)
Although this is purely a guess at this point, I would expect that the next revision of OS X, Leopard, will be made available both in PowerPC and Intel versions (and perhaps may even be a universal binary release.) However, this is purely speculative on my part.

Similar Messages

I have a mac and am thinking about upgrading from snowlepard to lion , is it a good idea and hard to adapt to

i have a mac and am thinking about upgrading from snowlepard to lion , is it a good idea and hard to adapt to

This is my "About This Mac" ... it shows I have Intel i7 CPU. If you are running SL, you at least have Intel, but would need at least Core2Duo an 2 GB (most people suggest 4 GB) RAM.
If you want to run Lion, remember that the discussions in this forum from last summer when Lion first came out (and since) were highly charged at times. Certain features that vanished or were added caused great heartache for some. Others love Lion, though. And some live with the changes waiting for any fixes they would desire.
Any PPC (PowerPC) applications you depend upon will not work under Lion. Use this page to see what applications will not run: http://roaringapps.com/apps:table
AND
Recall that you can clone your SL to an external disk to keep it safe. Then you can "experiment with" the new OSX (Lion or ML) until you know it works for you while still having your old SL safe in case you need it.
Good luck.

Iam currently using Quicken for Mac 2007. Can I upgrade my os from 10.6.8 to 10.9

I am currently using Quicken for Mac 2007. Can I upgrade my os from 10.6.8 to Mavericks 10.9?

Eric Root wrote:
Or wait for the new version of Quicken for Mac which is scheduled to be released 1st quarter 2014 according to a response to a post I read on the Intuit site.
Eric:
You are more trusting of "waiting" for Intuit to live up to their promises than I am!
From Baltwo's quoted article:
This happened when Lion released and Apple decided to remove Rosetta which was a software tool to allow old software to run on the new Intel based Macs. It took a bunch of developers 8 months to get 2007 working again on Lion even though they didn’t add any new features.
Intuit had six years notice that Rosetta was a temporary solution to its PPC versions of Quicken, yet waited until Apple finally removed Rosetta from Lion before instituting its programming for an Intel version!?!
This is very consistent with their history of how they treat their Mac customers relative to their Windows customers...
Morale of the story... don't wait! For $15, start using Quicken now.

I have 10.4.7 mac os x need to upgrade to 10.5 imac

I have 10.4.7 mac os x need to upgrade to 10.5 imac

Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)

HT1544 can I install Leopard 10.5 on my mini-mac 1.66Gz, intel Duo Core, 512 MB, 667 Hz

My 1st post. Can I install Leopard 10.5 on my old Mini-Mac 1.66GHz, intel Duo Core 512 MB, 667 Hz.
Thank you very much

Hello & a warm welcome!
Yes you can, but 10.6 would be cheaper...
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Classic/OS9 Apps no longer supported.
May be available from Apple again, or not...
https://discussions.apple.com/thread/4720126?tstart=0
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA

Mac Mini has slowed since upgrading to Yosemite

I have recently experienced a decrease in the speed of of my Mac Mini. I have upgraded to 8GB of RAM and still doesn't seem to help... Any suggestions?
EtreCheck version: 2.2 (132)
Report generated 5/4/15, 9:45 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    Mac mini (Mid 2010) (Technical Specifications)
    Mac mini - model: Macmini4,1
    1 2.4 GHz Intel Core 2 Duo CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    NVIDIA GeForce 320M - VRAM: 256 MB
        SAMSUNG 1920 x 1080
System Software: ℹ️
    OS X 10.10.3 (14D136) - Time since boot: 0:45:44
Disk Information: ℹ️
    TOSHIBA MK3255GSXF disk0 : (320.07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 319.21 GB (182.58 GB free) - 144 errors
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    HL-DT-STDVDRW GA32N
USB Information: ℹ️
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
Firewire Information: ℹ️
    WD My Passport 071D 800mbit - 800mbit max
        EFI (disk1s1) <not mounted> : 210 MB
        iExternal Drive (disk1s2) /Volumes/iExternal Drive : 2.00 TB (1.83 TB free)
Gatekeeper: ℹ️
    Mac App Store and identified developers
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.leapfrog.connect.shell.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Monitor    Application (/Applications/LeapFrogConnect.app/Contents/Monitor.app)
    iTunesHelper    UNKNOWN Hidden (missing value)
    WDDriveUtilityHelper    UNKNOWN (missing value)
    WDDriveUtilityHelper    Application (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
    AdobePDFViewer: Version: 10.1.13 [Click for support]
    Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    iPhotoPhotocast: Version: 7.0
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 319.21 GB Disk used: 136.63 GB
    Destinations:
        Time Capsule [Network]
        Total size: 997.71 GB
        Total number of backups: 27
        Oldest backup: 2015-04-10 05:35:53 +0000
        Last backup: 2015-05-05 03:49:23 +0000
        Size of backup disk: Excellent
            Backup size 997.71 GB > (Disk size 319.21 GB X 3)
Top Processes by CPU: ℹ️
         7%    WindowServer
         1%    nsurlsessiond(2)
         0%    cloudd
         0%    fontd
         0%    taskgated
Top Processes by Memory: ℹ️
    558 MB    kernel_task
    172 MB    com.apple.WebKit.WebContent
    106 MB    ocspd
    74 MB    Finder
    74 MB    mdworker(6)
Virtual Memory Information: ℹ️
    4.38 GB    Free RAM
    3.62 GB    Used RAM
    0 B    Swap Used
Diagnostics Information: ℹ️
    May 4, 2015, 08:54:09 PM    Self test - passed

Take a look at this article: http://www.cnet.com/how-to/five-tips-to-speed-up-your-mac/
Try these steps:
- Shut down your Mac
- Wait until your computer turns off and after that press the Power button
- Right after you hear the startup tone, press and hold the Shift key
- Release the Shift key when you see a grey Apple sign and the progress bar below this sign
- Once you see Desktop, start a Disc Utility scan to detect and repair file system errors (don't forget to choose your main hard drive)
- Click on Verify Disc and then, if asked to fix problems, on Repair Disk
- After this, click on Verify Disc Permissions and then on Repair Disc Permissions
- After the process is finished, shut down your Mac and turn it back on after about 30 seconds
Hope this helps!

Mac pro cannot boot after upgrade to 10.8.3

My Mac Pro cannot boot after upgrade to 10.8.3. Anything firmware I can reset or how should I do.
I am using a early 2008 Mac Pro

Can you boot into safe mode? http://support.apple.com/kb/ht1455
If not, how about Recovery? http://support.apple.com/kb/ht4718
If you can, run Disk Utlity and repair the disk. You can try rebooting normally, but I would just reinstall after quitting Disk Utility.

I have a pre-2008 Mac PRO how do I upgrade to Mountain Lion?

I have a pre-2008 Mac PRO how do I upgrade to Mountain Lion? On the Apple's site on upgrading (http://www.apple.com/osx/how-to-upgrade/), I see that "Mac Pro (Early 2008 or newer)" is required for the upgrade. What's up with that?
Will upgrading of the GPU do the trick?
I'm curretly on Snow Leopard, will I be limited to Lion?
Kamal
my system info:
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2.66 GHz
Number Of Processors:          2
Total Number Of Cores:          4
L2 Cache (per processor):          4 MB
Memory:          13 GB
Bus Speed:          1.33 GHz
Boot ROM Version:          MP11.005C.B08
SMC Version (system):          1.7f10
Serial Number (system): xxxxxxxxxxxxxxxxxxxxxx
Hardware UUID:          00000000-0000-1000-8000-00xxxxxxxx
ATI Radeon X1900 XT:
Chipset Model:          ATY,RadeonX1900
Type:          GPU
Bus:          PCIe
Slot:          Slot-1
PCIe Lane Width:          x16
VRAM (Total):          512 MB
Vendor:          ATI (0x1002)
Device ID:          0x7249
Revision ID:          0x0000
ROM Revision:          113-A52027-140
EFI Driver Version:          01.00.140

I have the following Mac Pro which I have upgraded the GPU to an ATI Radeon HD 5770:
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          3 GHz
Number of Processors:          2
Total Number of Cores:          4
L2 Cache (per Processor):          4 MB
Memory:          8 GB
Bus Speed:          1.33 GHz
Boot ROM Version:          MP11.005C.B08
SMC Version (system):          1.7f10
Serial Number (system):          G86334VTUPZ
Hardware UUID:          00000000-0000-1000-8000-0017F20153D2
Mountain Lion won't install.
Will this change or do I need to further upgrade the GPU.
Thanks In Advance!
--Dave K.

Back to my mac no longer works after upgrading to Lion

Back to my Mac no longer works after upgrading to Lion
After I upgraded my home machines to Lion, I can no longer access them from my work computer, which is running Snow Leopard. When they were both Snow leopard, it worked fine. How can I get them working again? I don't have control over the OS on my work computer. Is it necessary for me to downgrade all of my home computers to Snow leopard in order to get them talking again?
Additionally the binoculars icon appears in the menu bar all of the time. In previous versions, this would only happen when somebody connected to my machine. Could these problems be related?

OK, so further investigation has addressed the BTMM issue on a remote machine.
With all machines running lion, I was having issues trying to log in to a standard user headless machine already running. In Snow Leopard, I had no issues with this since you can log in via screen sharing using an admin login that's running a standard login. Lion allows multiple accounts to be signed in which is handy since you can now run virtual sessions. This means you can admin the remote computer without bothering the remote user.
The problem was that now logging in using admin login brings up the admin account (which makes sense) instead of the desktop to the standard login. I applied a similar solution to a problem that was related to screen sharing I found on this board. What I believe to be the fix is to add the standard user to the screen sharing user list. Then screen share to the remote account using the standard user credentials.
So on the remote computer, in System Settings->Sharing->Screen Sharing, add the standard user to be allowed access. Previously I only had admins. This may not be an ideal solution for what I'm trying to do since the remote computers primary login is the standard user to be used as a common computer, but it now works so I am happy with it.
Now my only "problem" is my AEBS complaining about my MobileMe credentials, but it doesn't appear to have an impact on BTMM performance so I'll quietly wait for a fix down the road.

I recently tried to update my iPhone 3 software via my mothers Mac book comp - during the upgrade I lost all my music and calendar dates and now the iTunes on my phone has my mothers iTunes detail - how do I get all my info back on the phone?

I recently tried to update my iPhone 3 software via my mothers Mac book comp - during the upgrade I lost all my music and calendar dates and now the iTunes on my phone has my mothers iTunes detail - how do I get all my info back on the phone?

Restore it using the computer you normally sync with.

I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?

I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?
I have tried bootcamp and have had no luck due to the fact that boot camp doesn't see the additional HDD space of 250Gb. What am I not doing?

Ouch, well there is a problem.
This is the stack of partitions on your old drive
EFI (hidden)
Lion (50GB say)
Bootcamp (50GB say)
Lion Recovery Partiton (hidden)
This is the same stack on your new drive imaged from the old one.
EFI (hidden)
Lion (50GB say)
Bootcamp (50GB say)
Lion Recovery Partiton (hidden)
Emtpy Space (100GB say)
This is what you want
EFI (hidden)
Lion (100GB say)
Bootcamp (100GB say)
Lion Recovery Partiton (hidden)
EFI has to be at the top of the drive and Lion Recovery has to be at the bottom of the drive.
And you only have four partitions.
You can't move the Lion Recovery Partition or Bootcamp partiton, however you can expand the Lion Partition into empty space below it. (but can't delete or move the Lion Recovery partition)
Your Duplicator duplicated perfectly, too perfectly Likely would work with same sized drives/partitions.
This is what your going to need to do.
You need to move the Bootcamp partition to a blank external drive using WinClone and disconnect. This is so you have two backups of it. (one on your old 500GB drive)
You will need a drive enclousre or IDE/SATA to USB adapter cable for the older 500GB drive and option key boot from it. (some enclosures can't be booted from so check first Other World Computing is good place to ask)
Download the free Carbon Copy Cloner, grab any new files off the new 750GB internal drive to the old 500GB your booted from.
Open Apple's Disk Utility and Erase with Zero option the entire internal 750GB drive and let it rip, this will map off as many bad sectors and improve reliability.
Now use Carbon Copy Cloner to clone the 500GB Lion + Lion Recovery Partitions to the internal 750GB, it will "fix" things and place Lion Recovery at the bottom of the drive where it belongs, give all the extra space to OS X Lion.
Next your going to have to follow WinClones instructions to restore your Bootcamp, likely you will have to recreate the Bootcamp partition first (in Bootcamp) to the size you want and then clone. Likely Winclone may "fix" Windows to recognize it's in a new larger partition now. I don't know you'll have to check as I haven't used it.
When Bootcamp creates the partition it will place it near the bottom next to the Lion Recovery Partition.
As you know you will have to re-validate Windows with Lord Redmond or it expires as you changed the hardware.

I have an older Airport Extreme (disc shaped) that we use with my wife's PowerBook (OS 10.5.8) and my MacBook Pro (OS 10.9.4). We currently only have Airport Utility on her Mac, but I want to upgrade the utility so I can use it on mine.

I have an older Airport Extreme (disc shaped) that we use with my wife's PowerBook (OS 10.5.8) and my MacBook Pro (OS 10.9.4). We currently only have Airport Utility on her Mac, but I want to upgrade the utility so I can use it on mine. Which version of the utility will work on my MacBook, and still control the older Airport Extreme?

if I update the Airport to the latest version, and "control" it with my MacBook Pro, will the older G4 still be able to use the signal from the new Airport?
Yes. Your G4 shouldn't have any difficulty connecting to a Wi-Fi network provided by the latest 802.11ac AirPorts as they support the earlier radio modes that the G4 uses.

Anyone having problems with Elements organiser 13 when try to import photos from Mac photos which was an upgrade from Iphotos on 9th April 2015. Before when I was using Iphotos all was ok...

Anyone having problems with Elements organiser 13 when try to import photos from Mac photos which was an upgrade from Iphotos on 9th April 2015. Before when I was using Iphotos all was ok...

hi I have been trying to do this, but PE13 comes up with a fail message saying that file types are not supported, am only trying to import jpeg files so can't understand this. So far have been unable to use PE13 at all, any ideas anyone please!

My Iphone and Ipad wouldn't appear in itunes when i connect them to my mac. I have already upgraded my itunes to the latest version. I have no problem synching my ipod though. Could it be because I am using an older mac? (Mac OS X version 10.4.11)?

Neither my iphone nor my ipad would appear in itunes when i connect them to my mac. I have already upgraded my itunes to the latest version. I have no problem synching my ipod to itunes using the same mac though. Could it be because I am using an older mac? (Mac OS X version 10.4.11)?

You need to be using a Mac OS X version at least as new as the one given in the device's original system requirements.
(74595)

Help needed to run a power Mac ap on Intel Mac.

Hi, I have a Davis Vantage Pro weather station that ran happily on my old Quicksilver Power Mac. Now I have upgraded to a Mac pro machine running Tiger, the 'Weatherlink' software won't work. Davis, a main player in scientific technologies have not upgraded their Mac software (unbelievably!)
Will Rosetta help here? .... or do I need to get a P.C?
Hope someone can advise.
Thanks
Lunasa

PPC apps run transparently on Intel Macs, however, in your case it may be a matter of incompatibility. The software is simply not compatible with the current versions of OS X. This has nothing to do with Rosetta. You would have the same problem on your QuickSilver were you to upgrade to Tiger.
If you transferred the software using Migration Assistant, then try reinstalling the software on the Intel Mac (but first be sure you fully uninstall the transferred app.)

Mac OS X PPC to Mac OS X Intel - cross upgrade?

Similar Messages

Maybe you are looking for