Mac OS X Problem ! Urgent !

I had recently purchased a Mac Os X today, and immediately installed the Mac OS X Leopard after the set up. Now, whenever I start up my computer and log in, it goes in, screen turns blue, and goes back to the log in/start up page today. any solutions would be nice. pleaseee help, thank you.

Hundreds of users are reporting an inability to properly startup after installing Mac OS X 10.5 (Leopard). This issue is typified by a successful installation, but a persistent blue screen on the subsequent restart, requiring a forced shut down. Unsurprisingly, virtually every user reporting this problem used a straight upgrade ("Upgrade Install") rather than performing an Archive and Install or Erase and Install as we previously recommended.
http://www.macfixit.com/article.php?story=200710261517596
Sounds to me like the data that use to be part of netinfo database issue.
Use to be /private/ (hidden) directory.
You could try an Archive & Install over your current setup and preserve network and account settings.
Did you repair your drive first? run Disk Utility against it? and clone all the contents so you can go back or erase and install?
http://docs.info.apple.com/article.html?artnum=306857

Similar Messages

Windows 8.1 Installation On Mac - Got a Problem

Windows 8.1 Installation On Mac - Got a Problem
Hi everyone,
I'v researched a lot about installing Win on Mac but I still got a problem when everything seems to be fine.
I got a Macbook Pro Retina, Late 2013 with OSX Mavericks and Bootcamp 5 installed on. And for installing windows, I already got an empty 8GB USB Drive formatted as MS-DOS (FAT32). And I've prepared Windows 8.1 ISO in my Downloads folder.
During my last effort, I opened Bootcamp Assist and then Chose the options: "Create Windows 7 or later version installation disk" and "Download the latest windows support software from Apple". Then I chose my Windows 8.1 ISO location and my destination. When it finished ,I was expecting it to run windows setup. But it closed and nothing happened
When I opened BootCamp again, only the first two options were available as before and "Install or remove Windows 7 or later" wasn't.
Now ,what do I have to do exactly? (NOTE: I'm not a professional. So please answer in a simple way. )
Should I restart the Mac and Hold OPTION while booting to run Windows setup? I was thinking about it but I thought I might screw it up all. So I decided to ask it here to be sure.
Any help will be appreciated by heart!

Hi Alcatrax,
I would recommend following the steps in this link in order to help you complete your installation of Boot Camp:
Boot Camp Help: Install Windows on your Mac
https://help.apple.com/bootcamp/mac/5.0/help/#apdecf0e4b6-b472-438d-881e-57c230b 1c250
Prepare your Mac for Windows
Boot Camp Assistant helps prepare your Mac for Windows by creating a new partition for Windows and then starting the Windows installer. Optionally, you can install Windows using an external USB drive that contains a Windows ISO image downloaded from Microsoft and Windows support software.
Important: If you’re using a portable computer, connect the power adapter before continuing.
Insert an external drive into the USB port on your Mac and keep it inserted while you install Windows and Windows support software.
Open Boot Camp Assistant, located in the Other folder in Launchpad.
Select the option to install Windows, select other options you need, then click Continue.
Here are the other options you can choose:
If you want to install Windows from an external USB drive and you have a Windows ISO image, select the option to copy the image to an external USB drive. If this option isn’t available, your Mac doesn’t support installing Windows from an external USB drive.
If you haven’t already downloaded the Windows support software for your Mac, select the option to download it. In a later step, you’ll install the Windows support software on your Windows partition.
Follow the onscreen instructions for the options you selected.
When you’re asked to create a Windows partition, specify a partition size. If you have multiple hard drives in your computer, you can select a different hard drive and create a single partition on that drive, so that the drive is solely used for Windows.
Note: You can’t resize the partition later.
If you need help determining the best size for your Windows partition, refer to your Windows installer documentation. For Windows 8, create a partition that is at least 30 GB.
In a later step, you’ll format the Windows partition.
If you are using an installation disc for the 64-bit version of Windows, insert it into the optical drive in your Mac or the external optical drive. Otherwise, keep the external USB drive with the 64-bit version of Windows inserted.
Click Install.
Boot Camp Assistant creates the Windows partition, restarts your Mac, then opens the Windows installer.
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Can I download music from my PC onto my new iPhone and still have my iPhone use iTunes on my Mac without a problem? I have no music on the Mac because it is new. Can I download music onto iPhone on both PC and Mac?

Can I download music from my PC onto my new iPhone and still have my iPhone sync with my Mac without a problem?
I've had an iPod over a year and have not done much with it except download music onto it from my PC. Just recently have purchased the iPhone. When I got my iPod I didn't have a Mac, but now I do. I am really into my iPhone, so now I want to make sure that I don't do anything wrong. So can I connect my iPhone to both my PC and my Mac without it getting mixed signals and stop working. I have no music on my Mac but plan to download music into iTunes on it. So can I download music from both computers without problems onto my iPhone?

StoneMountainGirl,
No. You can only music to your iPhone from one computer at a time. If you try to load music onto it from a 2nd computer, it will erase the current content on the iPhone and replace it with whats in the iTunes library you are connected to,
B-rock

My new macbook pro is giving me hardtime. even apple team is not being to solve it. they replace the motherboard first it didn't work. second time they formatted the computer and that also didn't work. every time my mac showing different problems.

my new macbook pro is giving me hardtime. even apple team is not being to solve it. they replace the motherboard first it didn't work. second time they formatted the computer and that also didn't work. every time my mac showing different problems.
At first my computer had issues. Once it go to sleep it will not back again. I dropped my laptop at apple store to fix it. After 10 days they returned my laptop saying they were no able to fix the problem so they replaced motherboard aiming if that might help. Acttually that didn't help.I had same issue again. I visited apple store again. This time they said they could fix, if I will allow them to format the harddrive. I said ok. They formatted it. It was working fine for few daysAfter few days compter is taking.even more than 15 min to shutdown. Now computer has another problem. It is being hang frequently like every 20'to.30 min.
I don't know what to do? I still have one month left on first year warranty. I have requested couple times to apple associates either to fix or replace or refund. They are showing me rude behavior. They are not understanding my situation. I am a student. I need to do lot of home work. Since last three month my mac book and apple associates giving me hard time. Any suggestions are welcome.

Contact Apple Customer Care - not Apple Care - Customer Support. Have your receipts handy and/or case numbers. Be patient, be calm, and tell your story just as you have here. I get the sense you are not in the US and don't have access to an Apple Store but are going to an independent shop. This makes using Customer Support all the more important. If phoning isn't viable, use registered mail.
Since time is running short, be prepared to purchase AppleCare to exennd your warranty 2 more years. Yes, you shouldn't have to do this, but it gives you added protection and more opportunities over the next 2 years to claim a replacement computer if you don't get one immediately. After dealing with a similar unhappy situation with a Mac in the late 1990s I finally got a replacement computer and reimbursed for the AppleCare policy.

My mac Mini has problem rendering images and video

THE PROBLEM:
My mac mini has problem rendering JPEG image. There are strips on the images. Other images such as GIF, PNG, TIFF, and BMP are displayed nicely.
The images shown in the links below illustrate the problem:
http://www.flickr.com/photos/terencewong/71481156/
http://www.flickr.com/photos/terencewong/73360989/
(Please note that this image is grabbed from my faulty Mac Mini and saved into TIFF. For uploading purpose, I converted it into JPEG on ANOTHER computer.)
For movies, AVI can be playback without problem. But when it is converted to MPEG, it looks like an untunned TV channel.
FIXES TRIED:
I did erase and install 3 to 4 times using both the install disc and my Tiger Family Pack. All ended up with strips on the JPEG images and the generated MPEG movies.
I've also tried to flash the firmware to 113-xxxxx-124 using ATI's october 2005 universal ROM update, however, the ROM Revision shown in System Profiler is still 113-xxxxx-116 no matter how many time I reboot the system.
INVESTIGATION:
Yesterday, I did some research and got to know that JPEG and MPEG are using DCT (Discrete Cosine Transform) for decompression. And the ATI Radeon 9200 chip provide such a transform on hardware basis, which free the CPU from doing something else. Feel free to point out my inaccuracy.
HARDWARE SPECIFICATION:
I bought the Mac Mini in the last Februray.
The system Boot ROM version is: 4.8.9f1
Display card is ATI Radeon 9200
Chipset Model: ATY,RV280
Revision ID: 0x0001
ROM Revision: 113-xxxxx-116
A POSSIBLE CONCLUSION:
I suspect that it is this part of the chip (the DCT) that is faulty.
Anyone know how to fix this problem?
Many thanks!

Assuming that your display is tightly connected, thus the problem is not caused by something as simple as that, the fact that a full erase and install has not removed the problem would, I think, point to this being a hardware issue, and given that everyone's mini (with the possible exception of some of the latest ones) has the same video chipset as yours, and do not suffer the problem that you appear to, it seems very likely that your mini has a fault which is in need of repair.
If you have an Apple Store nearby, I would take it there to have it checked out - at the very least they should be able to replicate your problem using an in-store display, and if not, thusly suggest it's something external to the mini and concerning your display or something very unusual in the immediate environment of the mini. If you don't have an Apple Store in reach, I'd take the system to an Apple authorized service provider since at the present time it is under warranty.

Clearing mac and DNS problems

Hi there,
let me know if this should be asked in a different community and ill repost it.
I have just changed my website host and have repointed my DNS to new host. However my macbook pro keeps taking me to the old host.
I have tried other computers and they all seem to go to new host , so it appears my mac is the problem.
I have tried clearing cache , history and cookies in the hope it would fix the problem but it hasnt.
What am i overlooking??????
Im not IT smart so please reply in simple language .
Any advice appreciated.
thanks
CG

If you moved your domain from one hosting service to a different one, and changed the the nameservers listing for your domain - which is what I think you're saying - then the "problem" really lies outside of your MacBook.
Changes to DNS entries, like the nameservers, can take anywhere from minutes to as long as a couple of days to propagate through the DNS system. How fast that change will show up for your ISP depends on how often their DNS servers update their caches and how often the hosting service updates their DNS entires to the DNS servers they are linked to. (Typically, hosting services are linked to DNS servers that update rather frequently - no less than once an hour.) The other computers you used may be hooked to different DNS servers that get updated more frequently than the one your MacBook is using.
If you know the IP address of the new hosting site, you can plug that into the address bar of your browser and it should get you to the new host, no problem. Using a URL is going to rely on updated DNS information making through the DNS system.
HTH,
-Doug

J2EE StartUp Problem, URGENT.

Hi all!
I'm having a problem since friday with the J2EE Engine Startup. The problem is that MMC says me that the server is running but i can access to the server by anyway. The developer trace of the jcontrol process is:
[Thr 2968] Tue Aug 09 13:59:50 2005
[Thr 2968] JControlICheckProcessList: process server0 started (PID:1544)
JStartupStartJLaunch: program = C:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
-> arg[00] = C:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
-> arg[01] = pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_toshiba-user
-> arg[02] = -DSAPINFO=J2E_00_sdm
-> arg[03] = -file=C:\usr\sap\J2E\JC00\SDM\program\config\sdm_jstartup.properties
-> arg[04] = -nodeName=sdm
-> arg[05] = -nodeId=2
-> arg[06] = -syncSem=JSTARTUP_WAIT_ON_2964
-> arg[07] = -jvmOutFile=C:\usr\sap\J2E\JC00\work\jvm_sdm.out
-> arg[08] = -stdOutFile=C:\usr\sap\J2E\JC00\work\std_sdm.out
-> arg[09] = -locOutFile=C:\usr\sap\J2E\JC00\work\dev_sdm
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_toshiba-user
-> lib path = PATH=C:\j2sdk1.4.2_08\jre\bin\server;C:\j2sdk1.4.2_08\jre\bin;C:\oracle\WAS\92\bin;C:\oracle\WAS\92\jre\1.4.2\bin\client;C:\oracle\WAS\92\jre\1.4.2\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_08\bin;C:\oracle\WAS\92\Appache\perl\5.00503\bin\MSWin32-x86;C:\usr\sap\J2E\SCS01\exe;C:\usr\sap\J2E\JC00\exe;C:\usr\sap\J2E\SYS\exe\run
-> exe path = PATH=C:\j2sdk1.4.2_08\bin;C:\usr\sap\J2E\JC00\j2ee\os_libs;C:\oracle\WAS\92\bin;C:\oracle\WAS\92\jre\1.4.2\bin\client;C:\oracle\WAS\92\jre\1.4.2\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_08\bin;C:\oracle\WAS\92\Appache\perl\5.00503\bin\MSWin32-x86;C:\usr\sap\J2E\SCS01\exe;C:\usr\sap\J2E\JC00\exe;C:\usr\sap\J2E\SYS\exe\run
[Thr 2968] Tue Aug 09 13:59:51 2005
[Thr 2968] JControlICheckProcessList: process SDM started (PID:1556)
[Thr 1188] Tue Aug 09 14:01:01 2005
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] Tue Aug 09 14:01:58 2005
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] Tue Aug 09 14:10:25 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:15:45 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:20:46 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:26:06 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:31:07 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:36:27 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:41:28 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
Then i try to login the visual admin gives me a windows error and the msg_server process shuts down alone. Then i restart that node and agregate the following lines to the trace:
Thr 1188] Tue Aug 09 14:42:25 2005
[Thr 1188] *** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c      2488]
[Thr 1188] *** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c      1652]
[Thr 1188] Tue Aug 09 14:42:27 2005
[Thr 1188] ***LOG Q0I=> NiPConnect2: SiPeekPendConn (10061: WSAECONNREFUSED: Connection refused) [nixxi_r.cpp 8588]
[Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 1188] Tue Aug 09 14:42:32 2005
[Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 1188] Tue Aug 09 14:42:38 2005
[Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 1188] Tue Aug 09 14:42:44 2005
[Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 1188] Tue Aug 09 14:42:49 2005
[Thr 1188] JControlMSConnect: reconnected to message server (toshiba-user/3601)
[Thr 1188] Tue Aug 09 14:48:11 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:53:12 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:58:32 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
I try to login the visual admin again and gives me the following error: "Cannot open connection on host: 191.9.6.22 and port: 50004"
Looking the log and trace files i see the following errors:
- SAPEngine_System_Thread[impl:5]_5##0#0#Error#1#/System/Server#Plain###Encomi: failed to connect to toshiba-user/3201(Connection refused: connect)#
- java.net.SocketException: socket closed
     at java.net.PlainSocketImpl.socketAccept(Native Method)
     at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:353)
     at java.net.ServerSocket.implAccept(ServerSocket.java:448)
     at java.net.ServerSocket.accept(ServerSocket.java:419)
     at com.sap.engine.core.port.impl0.ServerSocketListener.run(ServerSocketListener.java:87)
- erver socket listener opened by service on socket encountered error. The listener will be stopped.#2#p4#ServerSocket[addr=/0.0.0.0,port=0,localport=50004]
I dont know whats happening, if somebody knows i hope that helps me. Please is urgent.
Thx and Rgds.
Gregory

Hi, thx a lot both.
Respect the link
http://<hostname>:50<instanceno>00/sap/monitoring/SystemInfo , i cant access it. I cant access by telnet, by visual admin.
In the work folder under \usr\sap\<sid>\JC00 i found that the last updated files are:
- available.txt that contains the following data:
    Unavailable 08.08.2005 10:46:53 - 08.08.2005 10:58:54
    Available   08.08.2005 10:59:54 - 08.08.2005 13:52:54
    Unavailable 08.08.2005 13:53:54 - 08.08.2005 13:53:54
    Available   08.08.2005 13:54:54 - 08.08.2005 14:03:54
    Unavailable 08.08.2005 14:04:54 - 08.08.2005 14:04:54
    Available   08.08.2005 14:05:54 - 08.08.2005 14:34:54
    Unavailable 08.08.2005 14:35:54 - 08.08.2005 14:39:44
    Unavailable 08.08.2005 14:56:17 - 08.08.2005 16:24:13
    Unavailable 08.08.2005 16:28:07 - 08.08.2005 16:29:07
    Unavailable 08.08.2005 16:34:36 - 08.08.2005 17:17:58
    Unavailable 09.08.2005 08:13:36 - 09.08.2005 08:54:33
    Unavailable 09.08.2005 08:57:04 - 09.08.2005 12:46:25
    Available   09.08.2005 12:47:25 - 09.08.2005 13:26:25
    Available   09.08.2005 13:43:56 - 09.08.2005 13:55:56
    Unavailable 09.08.2005 13:56:40 - 09.08.2005 14:04:57
    Available   09.08.2005 14:05:57 - 09.08.2005 16:16:57
    Unavailable 09.08.2005 16:17:57 - 09.08.2005 17:27:12
    Unavailable 10.08.2005 08:10:30 - 10.08.2005 08:35:39
    Available   10.08.2005 08:36:39 - 10.08.2005 09:16:39
    Available   10.08.2005 12:33:51 - 10.08.2005 14:01:51
- dev_jcontrol that contains the information displayed in the developer trace of jcontrol process(and y mentioned above)
- dev_dispatcher that contains the following info:
    [Thr 2664] Wed Aug 10 08:33:04 2005
    [Thr 2664] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 2664] JLaunchISetClusterId: set cluster id 5761000
    [Thr 2664] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 2664] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 3320] Wed Aug 10 08:33:21 2005
    [Thr 3320] JLaunchISetP4Port: set p4 port 50004
    [Thr 3528] Wed Aug 10 08:33:26 2005
    [Thr 3528] JLaunchISetTelnetPort: set telnet port 50008
    [Thr 3528] JLaunchISetTelnetPort: set telnet port 50008
    [Thr 3584] Wed Aug 10 08:33:55 2005
    [Thr 3584] JLaunchISetHttpPort: set http port 50000
    [Thr 2664] Wed Aug 10 08:34:02 2005
    [Thr 2664] JLaunchISetState: change state from [Starting (2)] to [Running (3)]
    [Thr 2568] Wed Aug 10 08:34:08 2005
    [Thr 2568] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
    [Thr 3660] Wed Aug 10 08:35:07 2005
    [Thr 3660] JLaunchISetP4Port: set p4 port 50004
    [Thr 3600] Wed Aug 10 08:36:34 2005
    [Thr 3600] JLaunchISetHttpPort: set http port 50000
    [Thr 3612] Wed Aug 10 12:43:40 2005
    [Thr 3612] JLaunchISetHttpPort: set http port 50000
    [Thr 3612] JLaunchISetP4Port: set p4 port 50004
    [Thr 3612] JLaunchISetTelnetPort: set telnet port 50008
- dev_server0 that contains:
    [Thr 2676] Wed Aug 10 08:33:06 2005
    [Thr 2676] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 2676] JLaunchISetClusterId: set cluster id 5761050
    [Thr 2676] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 2676] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 4296] Wed Aug 10 08:34:58 2005
    [Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
    [Thr 4296] Wed Aug 10 08:35:00 2005
    [Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPConverters
    [Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPCharToNUCByteConverter
    [Thr 4296] Wed Aug 10 08:35:01 2005
    [Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPNUCByteToCharConverter
    [Thr 2676] Wed Aug 10 08:35:07 2005
    [Thr 2676] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]
    [Thr 208] Wed Aug 10 08:36:34 2005
    [Thr 208] JLaunchISetState: change state from [Starting applications (10)] to [Running (3)]
I still dont know whats happening. And i need to solve the problem urgent. I hope u can help me.
Thx and Rgds.
Gregory.

DATE FIELD PROBLEMS - URGENT

I´m having trouble with FormsCentral.
My form is running about 8 months with no problems.
Yesterday people started to complain that the system doesn´t accept any date.
That means the date field restricts date entries, from date dd/mm/aaaa (brazilian format) to another dd/mm/aaaa, but every date that users input in, is considered by the system as invalid, even it´s a correct and valid date right between the interval specified!
I need Help Urgent!!!
I depend on these forms to finish the payrol service from here.
Thanks
I´ll be waiting.
Maurício Galletti
Message was edited by: SNOWMAUSS
It look like the system accepts just dates starting from the date of today.
I´m testing.
Please help.
Thanks
Message was edited by: SNOWMAUSS
It looks like the system have some problem just with the date 20/10/2013?!
I´ve fixed the problem change the interval from 20/10/2013 to another date and used 21/10/2013 to another date and it works!
But I think something is wrong with the 20/10/2013 date?!
To reproduce the erros just create a new form with date feature with this exaclty configurations and the bug appears:
I´ll keep waiting
Message was edited by: SNOWMAUSS

Hi
I´ve concluded that the problem persist if the date interval starts at the
specific date "20/10/2013". Don´t know why?!
Look at the screen capture above, you aks for
Thanks a lot
image: Imagem inline 1
Maurício P. Galletti
Contador
[email protected]
( 55 11 3331-5567
www.cadt.com.br
2013/10/29 Genevieve Laroche <[email protected]>
Re: DATE FIELD PROBLEMS - URGENT created by Genevieve Laroche<http://forums.adobe.com/people/Genevieve+Laroche>in
FormsCentral - View the full discussion<http://forums.adobe.com/message/5797083#5797083

When I make my computer to sleep after a few hour it will light up again and say that The mac have a problem need to be shut down

I don't know why wne I put my mac to sleep it will light up it self after a few hour and say that the mac have a problem needs to be shut down, does anyone know why?

Sounds like it's experiencing a kernel panic. Post the latest report. See
About kernel panics,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details.

Mac to pc problems related to 10.4.3?- sorry!

I have read and tried many of the suggestions people have offered for mac to pc problems. I used to be able to video chat from my imac in London to my parent's PC in New Zealand. I upgraded to 10.4.3 and now my problems have started. I can see them in the buddy list and I can see their webcam highlighted, so I assume my computer recognises they are on-line and have a camera plugged in. If they invite me and I accept, the view through my camera appears and then momentarily freezes and then a few seconds later I get the usual ".....did not respond". I can video chat with other friends on macs and I can view the 'appleu3test01' AIM test sight, so I guess I have all the correct ports open (I've checked often enough!!). I use an origo modem on an ethernet cable.
I have tried the usual stuff like repairing permissions, deleting plist files etc.
Please can somebody help me?
iMac Mac OS X (10.4.3) origo modem

Thank you EZ Jim and Ralph,
I will forward the links to my folks in NZ. I had suggested they try uninstalling and re-installing AIM but I now see that 5.9 is no longer available and the latest version, Triton, doesn't appear to support video yet?
Do you have any idea where I can get the old 5.9 and that extra bit of software that pc uses needed?
iMac Mac OS X (10.4.3)

Don't know if this went through the first time. Cannon printer would not print black. bought a new Epson-800. Same problem. Can it be something in my Mac causing the problem. It's only the black that is not working.

Don't know if this went through the first time. Cannon printer would not print black. bought a new Epson-800. Same problem. Can it be something in my Mac causing the problem. It's only the black that is not working.

Bill ...
Believe it or not, might be a font issue > Computer won't print black text in...: Apple Support Communities

Mac Safari display problem

I created my site using a pc and my website works fine on all browsers except safari on mac. The problem is that at the bottom of my page ( About News Forum) The News and Forum go underneath About when this container should be right next to About tab.
My website www.robootica.com
Heres my code
<div id="left_column"><a href="../about.html" style="color:#999;">About</a></div>
<div id="column_container"><div id="right_column"><a href="../chat.html" style="color:#999;">Forum</a></div>
<div id="center_column"><a href="../news.html" style="color: #999;">News</a></div></div>
my CSS:
#left_column {
float: left;
width:350px;
font-family: "OCR A Std", "Orator Std";
color: #999;
padding-top: 10px;
text-align: center;
cursor: crosshair;
background-color: #000;
padding-bottom: 10px;
display:inline;
#column_container {
float:right;
width: 738px;
padding-top:10px;
cursor: crosshair;
background-color: #000;
padding-bottom:10px;
#right_column {
float:right;
width:350px;
font-family: "OCR A Std", "Orator Std";
color: #999;
text-align: center;
background-color: #000;
#center_column {
margin-left:10px;
width: 350px;
color: #999;
font-family: "OCR A Std", "Orator Std";
text-align: center;
background-color: #000;
float:right;

It doesnt look right on the latest version 5.0.2. My spry widget bar at the top is moved to the left when it suppose to be on the right, and the div container tag of News and Forum is moved under div About when it should be to the right (next to) the About div.

Caveman with club defeats ALL .mac and idisk problems!

Well, I'm pretty proud of myself. Like many others after upgrading to Leopard, had myriad .mac and idisk problems including, but not limited to: couldn't mount idisk on desktop, can't enable syncing of .mac on various computers, couldn't register a computer. I tried the log out, log in option in .mac. Also tried removing the syncservices folder from Home>Library>Application Support folder. I also tried reinstalling the system from a download of 10.5.1 udpate, repairing permissions, and every other trick I read about on the discussion forum. The ultimate solution for me? Open Keychain Access application in the Application>Utilities folder, show all the items and delete every item with '.mac' in it! Restarted computer, now idisk mounts fine, login to .mac works fine, and syncing works perfectly and I can register the previously unregisterable computer. While I have no logical explanation for this, because I don't understand enough about the Keychains to say why it worked, it clearly fixed the problem. Syncing has happened fine, using idisk is fine and all is well! Oh yes, I had a backup of my computer to an external drive before proceeding with my various interventions. Best of luck and don't be afraid to swing your caveman club wildly in the dark... you just might hit something worthwhile

I'm having exactly ONE of the problems Joshua lists here ... my iDisk will not mount to my desktop. All else works fine with my iDisk.
I don't see any responses to the original post. Help anyone?

Lacie Speakers and Mac Pro Firewire problem waking from sleep and loud feed

Lacie Speakers and Mac Pro Firewire problem waking from sleep and loud feedback. I had a powermac before this with the speakers and it worked fine. But the mac pro is having these issues. Is it the firewire port or the speakers or (and most likely) just a firmware glitch with mac pro? Anyone else see these issues?

http://web.mac.com/jerimydulay/Site/MyAlbums/Pages/Lacie_FirewireMIDI.html
Here is my audio settings. For some reason I wish I could remember what I did. It was actually the Apple Store tech in the Unversity Village in Seattle that gave me the idea and I swear I had to change the settings in MIDI setup. Now that Leopard is out it seems the MIDI stuff has been redone. I included screenshots of my MIDI setup as it is currently to see if you see something different on your computers. Let me know!

Details: i can not buy any thing from the app store and any thing from in side any games pls fix my problem urgent and as soon

Details:
Hi i can not buy any thing from the app store and any thing from in side any games pls fix my problem urgent and as soon
Note this is second email pls answer and fix my problem
<Email Edited by Host>

These are public forums, you are not talking to iTunes Support here (most of the people here, including myself, are fellow users) - I've asked the hosts to remove your email address from your post
If you are getting a message to contact iTunes support then you can do so via this page and ask them why the message is appearing (we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If it's a different problem ... ?

Hello, i own an i7 all in one mac. I tried to partition him using bootcamp but didn't have mac os cd neither mac instalation. the problem i am dealing now its that i cant go back to OS partition since its not appeared when i restart c and no win drivers

I tried to partition him using bootcamp but didn't have mac os cd neither mac instalation. the problem i am dealing now its that i cant go back to OS partition since its not appeared when i restart c and no win drivers to have a properly running system. I've thought as an option to re-download boot-camp and run the instalation from windows partition and see if i can repair it that way, didnt try yet thought just in case anyone has a better prposition or dealed with the same problem

Take it to your local Apple Store or AASP, it's covered by a 1 year hardware warranty. If you have AppleCare then give them a call but I'm pretty sure they will advise the same. If you have not purchased AppleCare yet please do, this will extend the warranty to 3 years however it MUST be purchased within the first year of ownership. Let it go 366 days and you are out of luck. AppleCare will also include telephone support too.
Good luck.

Mac OS X Problem ! Urgent !

Similar Messages

Maybe you are looking for